Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Influence of strain on SrFeO 3-δ oxidation, reduction, and water dissociation: Insights from ambient pressure X-ray photoelectron spectroscopy

The oxidation and reduction of metal oxides and their interaction with the environment play a critical role in their use for energy storage and conversion applications. The formation of surface adsorbates and their impact on oxide electronic structure can be challenging to probe experimentally, particularly for thin films which enable the study of epitaxial strain but have low surface areas. Here we present a detailed study using ambient pressure X-ray photoelectron spectroscopy of the reduction and oxidation of strained SrFeO 3-δ , induced by changes in temperature, oxygen partial pressure, and water vapor exposure. We find that in comparison to the oxidized lattice, application of tensile strain promotes the formation of oxygen vacancies at the surface, facilitating the subsequent incorporation of oxygen into the lattice in an oxygen environment. While tensile strain does promote the formation of hydroxyls from water dissociation, the kinetics of this process appear more sluggish than on less-strained surfaces, likely due to a competitive surface interaction with oxygen or bulk absorption of hydroxyl species. These findings relating strain, oxygen vacancies, and surface reactivity yield important insight into the surface functionality of oxides for energy conversion and storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A wide range experimental study and further development of a kinetic model describing propane oxidation

This work presents an experimental and kinetic modeling study of propane oxidation. Ignition delay times of propane were measured in a high-pressure shock tube and in rapid compression machines in the temperature range 689 - 1700 K at equivalence ratios of 0.5, 1.0 and 2.0 in 'air', for a wide range of pressures from 20 to 90 bar. CO and H 2 O mole fraction profiles for propane oxidation were measured in a shock tube behind reflected shock waves in the temperature range 1370-1840 K at equivalence ratios of 0.5, 1.0 and 2.0 and at a pressure of approximately 1.3 atm. Moreover, propane oxidation was studied using a jet-stirred reactor coupled to a synchrotron vacuum ultraviolet photoionization mass spectrometer at low temperatures in the range 565 - 690 K and at a pressure of 1 atm. Further, this wide range of experimental datasets for propane oxidation was used to reoptimize and update our previous kinetic mechanisms, AramcoMech3.0 and NUIGMech1.1. In the current mechanism, NUIGMech1.3, the thermo-chemical parameters of all species relevant to low-temperature propane oxidation chemistry, including propyl-peroxyl, hydroperoxyl-propyl, hydroperoxyl-propyl-peroxyl, and carbonyl-hydroperoxide radicals, are updated based on newly calculated values at the CCSD(T)-F12/TZ-F12//B2PLYPD3/TZ///B2PLYP-D3/TZ level of theory. The improvements made in the thermochemical values and in the kinetic parameters for the low-temperature propane oxidation reactions in NUIGMech1.3 result in better model agreement with the new IDTs and speciation data, including carbon monoxide, formaldehyde, propene, acetaldehyde and various minor products such as ethylene, acetic acid, acrolein as well as various hydroperoxide and cyclic ether species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The influence of cooling rate on condensation of iron, aluminum, and uranium oxide nanoparticles

Fundamental observations of particle size distributions are needed to develop models that predict the fate and transport of radioactive materials in the atmosphere following a nuclear incident. The extent of material transport is influenced by the time scales of particle formation processes (e.g., condensation, coagulation). In this study, we investigated the influence of cooling time scales on size distributions of uranium, aluminum, and iron oxide particles that are synthesized separately under identical run conditions inside the controlled environment of an argon plasma flow reactor. Two distinct temperature distributions are imposed along the flow reactor by varying the argon flow rate downstream of the plasma torch. The vaporized reactants of uranium, aluminum, and iron are cooled from about 5000K to 1000K before they are collected on silicon wafers for ex situ scanning electron microscope analysis. The microscope images show that the sizes of the largest aluminum and iron oxide particles heavily depend on the cooling time scales, whereas significant size variation with cooling rate is not observed for uranium oxide particles. In addition, the size distribution of aluminum oxide particles exhibits the broadest range among all three metal oxides studied. We performed simulations of particle size distributions using a kinetic model that couples gas phase oxidation chemistry with particle formation processes, including nucleation, condensation, and coagulation. The model results demonstrate the strong sensitivity of particle size distribution to different cooling histories (i.e., temperature vs residence time) along the flow reactor. In conclusion, the kinetic model also helps identify directions for future research to improve the predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Surface intermediates identified using IR spectroscopy during the catalytic oxidation of C 2 H 6 on IrO 2 (1 1 0) at near-ambient pressures

Characterizing surface intermediates during catalysis is essential for developing mechanistic models of catalytic reactions and for identifying rate-controlling steps. Here, in this work, we used polarization-dependent reflection absorption infrared spectroscopy (PD-RAIRS) to investigate surface intermediates that form on IrO 2 (1 1 0) during the catalytic oxidation of C 2 H 6 at pressures near 0.5 Torr. Our results show that adsorbed CO and HCO 2 are the only intermediates detectable with PD-RAIRS across a wide range of temperatures and reactant compositions during complete C 2 H 6 oxidation, giving rise to dominant peaks at about 2093 and 1310 cm −1 , respectively. These assignments were corroborated by RAIRS measurements following CO and HCOOH adsorption in ultrahigh vacuum, RAIRS with C 2 H 6 – 18 O 2 mixtures during catalysis and vibrational frequencies and IR intensities computed using density functional theory. We find that increasing the C 2 H 6 mole fraction in the reaction mixture raises the CO surface coverage relative to HCO 2 , correlating with increasing catalytic oxidation rates. The formation of CO and HCO 2 surface species at temperatures well below catalytic ignition indicates that the overall rate of C 2 H 6 oxidation on IrO 2 (1 1 0) is governed by steps late in the reaction sequence, such as H 2 O formation, CO oxidation and HCO 2 dehydrogenation. These findings provide key insight into the mechanism of alkane oxidation on IrO 2 (1 1 0) and valuable input for first-principles microkinetic modeling.

Pope, Connor [Univ. of Florida, Gainesville, FL (U↗
DOE OSTI2022

Sonochemical oxidation and stabilization of liquid elemental mercury in water and soil

Over 3000 mercury (Hg)-contaminated sites worldwide contain liquid metallic Hg [Hg(0) 1 ] representing a continuous source of elemental Hg(0) in the environment through volatilization and solubilization in water. Currently, there are few effective treatment technologies available to remove or sequester Hg(0) 1 in situ. We investigated sonochemical treatments coupled with complexing agents, polysulfide and sulfide, in oxidizing Hg(0) 1 and stabilizing Hg in water, soil and quartz sand. Results indicate that sonication is highly effective in breaking up and oxidizing liquid Hg(0) 1 beads via acoustic cavitation, particularly in the presence of polysulfide. Without complexing agents, sonication caused only minor oxidation of Hg(0) 1 but increased headspace gaseous Hg(0) g and dissolved Hg(0) aq in water. However, the presence of polysulfide essentially stopped Hg(0) volatilization and solubilization. As a charged polymer, polysulfide was more effective than sulfide in oxidizing Hg(0) 1 and subsequently stabilizing the precipitated metacinnabar (β-HgS) nanocrystals. Sonochemical treatments with sulfide yielded incomplete oxidation of Hg(0) 1 , likely resulting from the formation of HgS coatings on the dispersed µm-size Hg(0) 1 bead surfaces. Sonication with polysulfide also resulted in rapid oxidation of Hg(0) 1 and precipitation of HgS in quartz sand and in the Hg(0) 1 -contaminated soil. This research indicates that sonochemical treatment with polysulfide could be an effective means in rapidly converting Hg(0) 1 to insoluble HgS precipitates in water and sediments, thereby preventing its further emission and release to the environment. We suggest that future studies are performed to confirm its technical feasibility and treatment efficacy for remediation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxidative coupling of methane (OCM) conversion into C 2 products through a CO 2 /O 2 co-transport membrane reactor

Oxidative coupling of methane (OCM), which transforms CH 4 into C 2 products (C 2 H 6 and C 2 H 4 ) with molecular O 2 as the oxidant, is one of the most studied direct methane conversions (DMCs). However, a major technical hurdle to the OCM process is to achieve high CH 4 conversion at high C 2 (C 2 H 6 and C 2 H 4 ) selectivity. One rudimentary cause for this “tradeoff” behavior is the high chemical reactivity of the products (C 2 H 6 or C 2 H 4 ), which can be re-oxidized by O 2 . To overcome this thermodynamic challenge, minimizing the oxidizing power of the oxidant and lowering the local oxygen partial pressure are keys. Here, In this work, we demonstrate a new membrane reactor that capture CO 2 /O 2 from a flue gas and uses it for OCM conversion. The results show that the co-captured CO 2 /O 2 mixture converts CH 4 into C 2 H 6 in the presence of a 2%Mn–5%Na 2 WO 4 /SiO 2 catalyst, followed by thermal cracking of C 2 H 6 into C 2 H 4 and H 2 . The presence of CO 2 decreases the local partial pressure of O 2 , thus reducing the propensity of C 2 -products re-oxidation and leading to a higher C 2 selectivity. We show that a small button-type membrane reactor can achieve 12% C 2 yield with ~57% C 2 -selectivity using a diluted CH 4 -Ar mixture as the feedstock. We expect higher C 2 yield with tubular plug-flow membrane reactors in the future. We also highlight the unique advantage of the membrane reactor in intensifying CO 2 capture from both flue gas and OCM purification process into one single step.

42 ENGINEERING↗
DOE OSTI2023

Design Strategies of Spinel Oxide Frameworks Enabling Reversible Mg-Ion Intercalation

In this study, reversible Mg 2+ intercalation in metal oxides frameworks is a key enabler for an operational Mg ion battery with high energy density needed for the next generation of energy storage technologies. While functional Mg-ion batteries have been achieved in structures with soft anions (e.g., S 2- and Se 2- ), they do not meet energy density requirements to compete with the current rechargeable lithium-ion batteries due to their low insertion potentials, emphasizing the necessity of finding an oxide-based cathode that operates at high potentials. A leading hypothesis to explain the limited availability of oxide Mg-ion cathodes is the belief that Mg 2+ has sluggish diffusion kinetics in oxides due to strong electrostatic interactions between the Mg 2+ ions and oxide anions in the lattice. From this assessment, it can be hypothesized that such rate limiting kinetic shortcomings can be mitigated by tailoring an oxide framework through creating less stable Mg 2+ - O 2- coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Control of Speciation of Molybdenum Oxides in MFI-Type Zeolites

Metal oxide-impregnated zeolites are employed in a wide variety of catalytic reactions, including methane dehydroaromatization (MDA). The most studied catalysts for MDA are Mo carbides supported on H-ZSM-5, formed through the carburization of Mo-oxide-loaded H-ZSM-5. A complete structural understanding of these materials has not yet been achieved, limiting the potential for rational catalyst design for improved performance. We hereby pursue experimental and theoretical investigations of these catalyst precursors to uncover rational design principles. We employ temperature-programmed oxidation and extended X-ray absorption fine-structure experiments, density functional theory calculations, and QuantEXAFS analysis to unveil Mo-oxide speciation in H-ZSM-5. Finally, we demonstrate that Mo-oxides exist within these systems as a combination of various motifs, and the relative abundance of these species is controlled through tailored preparation methods. The synergies exploited in this work may be leveraged in other related catalysts. The conclusions drawn are applicable to other relevant applications of zeolite-supported metal oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical Oxidation in Garnet-Type Solid Electrolyte by Formation of Point Defects

All-solid-state batteries hold greater promise for improving safety and energy density over conventional battery technology employing organic liquid electrolytes. One of the required features of a Li + conducting solid electrolyte is electrochemical stability, attained thermodynamically or kinetically, within the targeted operating voltage and temperature ranges. Therefore, understanding of the oxidative or reductive degradation mechanism is important to allow the design of stable solid electrolyte materials. This work contributes to building an understanding of the oxidative degradation mechanism in lithium solid electrolytes at cell operating conditions. Here, we have focused on resolving the oxidative decomposition mechanism of Al-doped lithium garnet Li 6.28 Al 0.24 La 3 Zr 2 O 12 (LLZO) as a state-of-the-art inorganic ceramic electrolyte. By combining experimental and computational analyses, we show that oxidation of LLZO occurs by simultaneous loss of oxygen and lithium from the structure, resulting in substoichiometric LLZO, at a moderate temperature (80 °C) and a high electrode potential (4.3 V vs Li/Li + ). Based on X-ray absorption and diffraction analyses, we find that the zirconium coordination shells in LLZO contract while the crystal structure experiences positive chemical strain upon electrochemical oxidation. The results from ex situ structural characterization of both the local structure and crystal symmetry are supported by a substoichiometric LLZO with lithium and oxygen vacancies, modeled by density functional theory (DFT) calculations. These chemical and structural changes in LLZO suppress effective lithium-ion conductivity by an order of magnitude. Formation of lithium and oxygen vacancies in LLZO upon electrochemical oxidation is different from prior thermodynamic predictions of phase decomposition of LLZO. The difference here is that the experiments were conducted at near-room temperature, which can hinder the kinetics of phase separation, and thus, the resultant LLZO solid electrolyte is still single-phase but substoichiometric in Li and O. In conclusion, these findings contribute an important degradation mechanism of the electrolyte, relevant for practical operational conditions of solid-state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Interfacial and Activation Energies of Environmentally Abundant Heterogeneously Nucleated Iron(III) (Hydr)oxide on Quartz

Poorly crystalline iron(III) (hydr)oxide nanoparticles are ubiquitous in environmental systems and play a crucial role in controlling the fate and transport of contaminants. Yet, the thermodynamic and kinetic parameters, e.g., the effective interfacial (α^') and apparent activation (E a ) energies, of iron(III) (hydr)oxide nucleation on earth-abundant mineral surfaces have not been determined, which hinders an accurate prediction of iron(III) (hydr)oxide formation and its interactions with other toxic or reactive ions. Here, for the first time, we report experimentally obtained α^' and E a for iron(III) (hydr)oxide nucleation on quartz mineral surfaces, by employing a flow-through, time-resolved grazing incidence small angle X-ray scattering (GISAXS). GISAXS enabled the in situ detection of iron(III) (hydr)oxide nucleation rates under different supersaturations (σ, achieved by varying pH 3.3-3.6) and temperatures (12-35ºC). By quantitative analyses based on classical nucleation theory, α^' was obtained to be 34.6 mJ/m 2 and E a was quantified as 32.8 kJ/mol. The fundamental thermodynamic and kinetic parameters obtained here will advance our fundamental understanding of the surface chemistry and nucleation behavior of iron(III) (hydr)oxides in subsurface and water treatment systems, as well as their effects on the fate and transport of pollutants in natural and engineered water systems. The in situ flow-through GISAXS method can also be adapted to quantify thermodynamic and kinetic parameters at interfaces for many important solid–liquid environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of the Chemical States of Copper on Methanol Decomposition and Oxidation

Here, the decomposition and oxidation reactions of CH 3 OH over metallic Cu(100) and Cu 2 O-covered Cu(100) surfaces are studied using a combination of in-situ ambient-pressure X-ray photoelectron spectroscopy, Auger electron spectroscopy, and density functional theory calculations. We identify the sequential chemical transformation pathways from bond cleavage to the formation of intermediates and final products under operational conditions. Accumulative surface adsorption of CH 3 O species on metallic Cu(100) impedes the decomposition of CH 3 OH. Co-dosing on metallic Cu(100) with low pressures of 1·10 -4 Torr CH 3 OH + 1·10 -4 Torr O 2 results in partial oxidation of CH 3 OH, where the chemisorbed O ads reduces surface sites available for CH 3 O adsorption, decreasing the surface activity for CH 3 OH decomposition. In contrast, the Cu 2 O overlayer formed under the elevated pressures of 0.33 Torr CH 3 OH + 0.66 Torr O 2 promotes the total oxidation of CH 3 OH into the final products of CO 2 and H 2 O, arising from the active reaction 2 between lattice O within Cu 2 O and intermediates of CH 3 O, CH 2 O, HCOO, and CO. Despite the more favorable O-H bond scission, C-O bond scission also occurs to result in surface accumulation of CH x on metallic Cu(100), blocking active sites for decomposition reactions of CH 3 OH and CH 3 O. By comparison, the CH x species on the Cu 2 O-covered Cu(100) undergo oxidation into CO 2 and H 2 O with lattice O in the Cu 2 O overlayer, thereby freeing active sites for the total oxidation of CH 3 OH. These results highlight the distinct roles of metallic Cu and Cu 2 O in the pathways of CH 3 OH decomposition and oxidation reactions, offering practical insights for the design of Cu-based catalysts with tailored reactivity and selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Oxidation Temperature-Dependent Electrochemical Doping of WO 3 Deposited via Atomic Layer Deposition

Silicon-based photoelectrochemical devices show promise for the performance of light-driven CO 2 reduction but suffer from instability under photoelectrochemical conditions relevant to CO 2 reduction. Coating silicon electrodes with thin layers of metal oxides has shown promise to passivate unstable silicon surfaces, and many different metal oxides can be deposited on silicon using various techniques. In this study, we investigate the fundamental photoelectrochemical performance of WO 3 -coated silicon photoelectrodes, which were generated by oxidation of W-metal films deposited via atomic layer deposition on both degenerately doped (nSi + ) and low-doped (pSi) silicon. Two different oxidation temperatures were investigated (400 and 600 °C), and it was found that the monoclinic phase of WO 3 predominates at both temperatures but that more grain boundaries are present in the 600 °C film. From X-ray photoelectron spectroscopy, the stoichiometry of both films was found to be 1:3 W:O, and low electron energy loss experiments indicate band gaps of 3.0 and 3.1 eV for 400 and 600 °C films, respectively. Cyclic voltammetry experiments showed that the electron transfer kinetics increased after continued redox cycling, particularly for the material produced at 400 °C. X-ray photoelectron spectra suggest that the observed increase in electrode conductivity is due to the formation of oxygen vacancies in the film. Electrochemical impedance spectroscopy indicated that charge transport through the films was impacted by the grain boundaries that formed during oxidation of the film. Photoelectrochemical studies on pSi/WO 3 electrodes were highly variable, only producing a photocurrent and photovoltage with some samples. Our best sample, formed at 400 °C, produced a photovoltage of 180 mV, which is lower than what has previously been reported for WO 3 -coated silicon (500 mV). We hypothesize that the variability in photoelectrochemical experiments arose from a roughened WSiO x interface that is generated during film preparation. WO 3 shows promise as a metal oxide coating for silicon, but our results suggest that formation of a high-quality interface between Si and WO 3 is vital for best performance.

Charge transfer↗
DOE OSTI2025

Redox Couples Control Band Bending, Photovoltage, and Quasi-Fermi Levels in Tungsten Oxide (WO 3 ) Photoanodes

Tungsten oxide (WO 3 ) is a well-known photoanode and photocatalyst for photoelectrochemical (PEC) water oxidation. Because the compound has a deep valence band, it can facilitate the oxygen evolution reaction without added cocatalysts, and it can drive the oxidation of species with much higher electrochemical potentials, including the conversion of water to hydrogen peroxide, sulfate to persulfate, and iodate to meta-periodate. Here, we use the liquid vibrating Kelvin probe surface photovoltage (liquid VK-SPV) technique in combination with open circuit potential (OCP) and photoelectrochemical (PEC) scans to assess the possibility of reaching such oxidizing potentials in aqueous electrolytes and at open circuit. Here, this is done by mapping the quasi-Fermi levels of electrons and holes at the interfaces as a function of the light intensity. Nanostructured WO 3 photoelectrodes for this purpose were fabricated by thermal annealing of a tungstic acid solution on fluorine-doped tin oxide. Electrochemical measurements are conducted at open circuit and 400 nm LED light illumination in electrolytes containing fast (O 2 /H 2 O 2 ), slow (O 2 /H 2 O), and very oxidizing (NaIO 4 /NaIO 3 ) redox couples. Photovoltage values scale with the light intensity and with the built-in potential for each redox couple and reach values up to 0.61 V under 20 mW cm –2 illumination for the NaIO 4 electrolyte. This shows that the photoelectrodes behave like Schottky-type diodes whose maximum possible energy output is determined mainly by the built-in voltage of each junction. For slow redox couples, the quasi-Fermi level of the holes increases with light intensity due to hole accumulation at the WO 3 –liquid interface. For example, for the O 2 /H 2 O electrolyte, interfacial hole accumulation and removal occur on the 90–300 s time scale. For the fast hole acceptor H 2 O 2 , on the other hand, the quasi-Fermi level of the photoholes is pinned to the electrochemical potential of the O 2 /H 2 O 2 couple. This limits the energy conversion efficiency of the electrode. Overall, these results reveal the influence of charge transfer thermodynamics and kinetics on the photovoltage of WO 3 . Furthermore, the work further establishes VK-SPV as a contactless method to observe the photovoltage, carrier dynamics, and quasi-Fermi levels of semiconductor-liquid junctions.

Electrodes↗
DOE OSTI2025

Resolving the Valence of Iron Oxides by Resonant Photoemission Spectroscopy

Precisely determining the oxidation states of metal cations within variable-valence transition metal oxides remains a significant challenge, yet it is crucial for understanding and predicting the properties of these technologically important materials. Iron oxides, in particular, exhibit a remarkable diversity of electronic structures due to the variable valence states of iron (Fe 2+ and Fe 3+ ). A quantitative analysis using conventional X-ray photoelectron spectroscopy (XPS) is challenging because of the strong overlap of the Fe 2p XPS peaks from different oxidation states. Here, in this study, we show how this problem can be resolved using Resonant Photoemission Spectroscopy (ResPES), which unambiguously distinguishes Fe oxidation states and spectroscopically estimates the composition ratio of Fe cation valence states in the complex Fe oxides. We demonstrate this in the model case of a FeO 2 monolayer film on Pt(111), showing that the FeO 2 film consists of an equal mixture of Fe 2+ and Fe 3+ cations, yielding an average valence of +2.5, contrary to the +3 valence proposed based on density functional theory (DFT).

Chen, Hao [Lawrence Berkeley National Laboratory (↗
DOE OSTI2023

Oxidative Grafting for Catalyst Synthesis in Surface Organometallic Chemistry

The development of new methods of catalyst synthesis with the potential to generate active site structures orthogonal to those accessible by traditional protocols is of great importance for discovering new materials for addressing challenges in the evolving energy and chemical economy. Here, in this work, the generality of oxidative grafting of organometallic and well-defined molecular metal precursors onto redox-active surfaces such as manganese dioxide (MnO 2 ) and lithium manganese oxide (LiMn 2 O 4 ) is investigated. Nine molecular metal precursors are explored, spanning groups 4–11 and each of the three periods of the transition metal series. The byproducts of the oxidative grafting reaction, a mixture of protodemetalation and ligand homocoupling for several organometallic precursors, was found to provide insights into the mechanism of the grafting reaction, suggesting oxidation of both the metal d-orbitals, as well as the metal–carbon σ-bonds, resulting in ejection of the ligand radical fragment. Analysis of the supported structures and oxidation state by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) suggests that several of the chemisorbed metal ions are intercalated into interstitial vacancies of the surface structure while other complexes form intact molecular fragments on the surface. Proof of concept for the use of this metalation protocol to generate diverse, metal-dependent catalytic performance is demonstrated by the application of these materials in the conversion of cyclohexane to K/A oil (cyclohexanol and cyclohexanone) with tert-butyl hydroperoxide, as well as in the low-temperature (T ≤ 50 °C) oxidation of carbon monoxide to carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deterministic Fabrication of Large-Area, High-Crystallinity Oxide Moiré Superlattices

Oxide twistronics extends moiré engineering beyond van der Waals materials, offering a promising platform for accessing emergent interfacial phenomena arising from the strong coupling of lattice, charge, and orbital degrees of freedom in complex oxides. However, deterministic fabrication of high-crystallinity oxide moiré superlattices over large lateral dimensions remains challenging due to the three-dimensional bonding network of oxides. Here, we demonstrate a scalable, generalized fabrication strategy that enables the formation of high-crystallinity oxide moiré superlattices with clean, chemically bonded interfaces and precisely controlled twist angles down to nominal values of 0.1°, achieving subdegree twist-angle accuracy across large contiguous lateral dimensions approaching the millimeter scale. Using NaNbO3 as a model system, we show that the resulting interlayer coupling drives pronounced structural reconstruction that modifies both the phase structure and ferroelectric domain configuration. Synchrotron-based X-ray 3D reciprocal space mapping reveals the emergence of a single-phase state in twisted bilayers, in contrast to the mixed-phase structure observed in single-layer membranes prior to twist assembly. The structural signatures are further consistent with gradual lattice rotation distributed along the thickness direction that may accommodate interfacial shear strain, distinct from reconstruction observed in van der Waals moiré systems which primarily occurs through in-plane stacking rearrangement. This collective lattice response is correlated with twist-dependent nanoscale electromechanical modulations observed by piezoresponse force microscopy. These results establish a scalable materials platform for oxide twistronics and support the implementation of twist-engineered functionalities in practical, macroscale device architectures.

Ghanbari, Reza [North Carolina State University (N↗
DOE OSTI2021

Elucidating the Role of Halides and Iron during Radiolysis-Driven Oxidative Etching of Gold Nanocrystals Using Liquid Cell Transmission Electron Microscopy and Pulse Radiolysis

Graphene liquid cell transmission electron microscopy (TEM) has enabled the observation of a variety of nanoscale transformations. Yet understanding the chemistry of the liquid cell solution and its impact on the observed transformations remains an important step toward translating insights from liquid cell TEM to benchtop chemistry. Gold nanocrystal etching can be used as a model system to probe the reactivity of the solution. FeCl 3 has been widely used to promote gold oxidation in bulk and liquid cell TEM studies, but the roles of the halide and iron species have not been fully elucidated. In this work, we observed the etching trajectories of gold nanocrystals in different iron halide solutions. We observed an increase in gold nanocrystal etch rate going from Cl - - to Br - - to I - -containing solutions. Furthermore, this is consistent with a mechanism in which the dominant role of halides is as complexation agents for oxidized gold species. Additionally, the mechanism through which FeCl 3 induces etching in liquid cell TEM remains unclear. Ground-state bleaching of the Fe(III) absorption band observed through pulse radiolysis indicates that iron may react with Cl 2 · - radicals to form an oxidized transient species under irradiation. Complete active space self-consistent field (CASSCF) calculations indicate that the FeCl 3 complex is oxidized to an Fe species with an OH radical ligand. Together our data indicate that an oxidized Fe species may be the active oxidant, while halides modulate the etch rate by tuning the reduction potential of gold nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of Varying the Photoanode/Catalyst Interfacial Composition on Solar Water Oxidation: The Case of BiVO 4 (010)/FeOOH Photoanodes

Photoanodes used in a water-splitting photoelectrochemical cell are almost always paired with an oxygen evolution catalyst (OEC) to efficiently utilize photon-generated holes for water oxidation because the surfaces of photoanodes are typically not catalytic for the water oxidation reaction. Suppressing electron–hole recombination at the photoanode/OEC interface is critical for the OEC to maximally utilize the holes reaching the interface for water oxidation. Here, in order to explicitly demonstrate and investigate how the detailed features of the photoanode/OEC interface affect interfacial charge transfer and photocurrent generation for water oxidation, we prepared two BiVO 4 (010)/FeOOH photoanodes with different Bi:V ratios at the outermost layer of the BiVO 4 interface (close to stoichiometric vs Bi-rich) while keeping all other factors in the bulk BiVO 4 and FeOOH layers identical. The resulting two photoanodes show striking differences in the photocurrent onset potential and photocurrent density for water oxidation. The ambient pressure X-ray photoelectron spectroscopy results show that these two BiVO 4 (010)/FeOOH photoanodes show drastically different Fe 2+ :Fe 3+ ratios in FeOOH both in the dark and under illumination with water, demonstrating the immense impact of the interfacial composition and structure on interfacial charge transfer. Using computational studies, we reveal the effect of the surface Bi:V ratio on the hydration of the BiVO 4 surface and bonding with the FeOOH layer, which in turn affect the band alignments between BiVO 4 and FeOOH. These results explain the atomic origin of the experimentally observed differences in electron and hole transfer and solar water oxidation performance of the two photoanodes having different interfacial compositions.

14 SOLAR ENERGY↗