Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Numerical simulation of the leading-edge separation vortex for a wing and strake-wing configuration

In the present investigation, the 'thin layer' Navier-Stokes equations are used to compute the flow about a delta wing and a strake-delta wing configuration. Both configurations possess blunt noses and rounded leading edges. The computational grid about these configurations is generated using a newly developed three-dimensional grid-generation code which solves a set of Poisson equations with spherical coordinate variables using an alternating direction implicit (ADI) scheme. Computational results are obtained for an isolated wing with 60 deg sweep and a strake-wing configuration with 80-60 deg sweep. Computations for angles of attack in the range from 6 to 30 deg are presented. Attention is given to the effect of the angle of attack, the Mach number, and the Reynolds number. Theoretical results are compared with experimental data.

Fujii, K.↗

Structure of the quasi-parallel bow shock - Results of numerical simulations

A one-dimensional, nonperiodic hybrid code in which ion dynamics are treated exactly, while those of electrons are omitted by neglecting electron inertia and pressure, is employed in the simulation of quasi-parallel bow shock structures. It is found that for an Alfven Mach number smaller than 3, the magnetic field profile of the shock is laminar or quasi-laminar, and that the upstream waves are right-hand polarized whistlers. Downstream waves are absent or low in amplitudes. For Alfven Mach numbers greater than 3, the magnetic field profile of the shock is turbulent, and the upstream waves are again right-hand polarized whistlers. The transition from laminar-subcritical to turbulent-supercritical shock structures is shown to be due to the firehose instability which occurs at Alfven Mach numbers greater than about 3.

Kan, J. R.↗

Numerical simulation of the atmospheric response to equatorial Pacific sea surface temperature anomalies

There exists observational and modeling evidence to the effect that sea surface temperature (SST) anomalies in the equatorial Pacific have a significant effect upon wintertime climate in the Pacific/North American sector of the hemisphere. In connection with the emergence of a more definitive observational basis for designing general circulation model (GCM) experiments to investigate the atmospheric response to equatorial SST anomalies, it was recommended to conduct a series of GCM experiments. The present study involves a series of extended (1-2 month) integrations.Attention is given to a review of previous GCM experiments, the plan for the present study, the general circulation model and its simulation of the winter and summer circulation described by Shukla et al. (1981), tropical precipitation, upper level flow, low-level circulation and temperature, and the tropical tropospheric temperature.

Shukla, J.↗

Mature thunderstorm cloud top structure - Three-dimensional numerical simulation versus satellite observations

Preliminary results of four runs with a three-dimensional model of the effects of vertical wind shear on cloud top height/temperature structure and the internal properties of isolate midlatitude thunderstorms are reported. The model is being developed as an aid to analyses of GEO remote sensing satellite data. The grid is a 27 x 27 x 20 mesh with 2 km horizontal resolution and 0.9 vertical resolution. The total grid is 54 km on a side and 18 km deep. A second-order Crowley scheme for advecting momentum is extended with a third-order correction for spatial truncation error, and the earth-relative horizontal surface wind components are decreased to 50 percent of their values at 0.45 km. A temperature increase with height is included, together with an initial impulse consisting of a nonrotating cylindrical weak buoyant updraft 10 km in radius. The results of the runs are discussed in terms of the time variation of the vertical velocity extrema, the effects of strong and weak shear on a storm, the cloud top height, the Lagrangian dynamics of a thermal couplet, and data from a real storm.

Schlesinger, R. E.↗

Numerical simulation of vortex breakdown by the vortex-filament method

The vortex-filament method was applied to the simulation of vortex breakdown. The principal vortex region was represented by multiple filaments, and an axial velocity component was induced by a spiral winding of the filaments. An accuracy check was performed for a cylindrical swirling flow with simple analytical expressions for the axial and theta velocities. The result suggests that the flow field can be simulated to any accuracy by increasing the number of filaments. An axisymmetric-type vortex breakdown was simulated, with experimental data serving as upstream conditions. The calculated axial- and theta-velocity contours show the breakdown of the vortex, including a rapid change in the vortex core, followed axially by a recovery zone and then a second breakdown. When three dimensional initial data are used the second breakdown appears to be of the spiral type in correspondence with experimental observations. The present method can easily be used to simulate other types of vortex breakdown or other vortex flows with axial velocity.

Nakamura, Y.↗

Numerical simulations of fuel droplet flows using a Lagrangian triangular mesh

The incompressible, Lagrangian, triangular grid code, SPLISH, was converted for the study of flows in and around fuel droplets. This involved developing, testing and incorporating algorithms for surface tension and viscosity. The major features of the Lagrangian method and the algorithms are described. Benchmarks of the algorithms are given. Several calculations are presented for kerosene droplets in air. Finally, extensions which make the code compressible and three dimensional are discussed.

Fritts, M. J.↗

A numerical simulation of the dispersal of aerial sprays

A computer program was developed to predict the trajectory, ground deposition, and drift of liquid sprays injected into the wake of an agricultural aircraft in ground effect. The program uses a horseshoe vortex wake model and includes the effects of liquid droplet evaporation, crosswind, the propeller slipstream, ground effect, and tunnel walls on small scale models. This user's guide includes several case examples demonstrating user options. A complete listing of the FORTRAN program is provided.

Bragg, M. B.↗

Recent advances in numerical simulation of space-plasma-physics problems

Computer simulations have become an increasingly popular, important and insightful tool for studying space plasmas. This review describes MHD and particle simulations, both of which treat the plasma and the electromagnetic field in which it moves in a self consistent fashion but on drastically different spatial and temporal scales. The complementary roles of simulation, observations and theory are stressed. Several examples of simulations being carried out in the area of magnetospheric plasma physics are described to illustrate the power, potential and limitations of the approach.

Birmingham, T. J.↗

Numerical simulation of two-dimensional inlet flowfields

Inlet flowfields for airbreathing missiles are calculated by a two-dimensional computational method. A supersonic freestream is assumed to allow the forebody calculation to be uncoupled from the inlet calculation. The inlet calculation employs an implicit, time-marching, finite difference procedure to solve the Euler equations formulated in body-fitted coordinates. The method can be used for a flowfield with both subsonic and supersonic regions and is found to converge rapidly for supercritical inlet operation. For subcritical inlet operation, however, convergence to steady state is slow.

Biringen, S.↗

Numerical simulation of flow through inlets/diffusers with terminal shocks

Two-dimensional Euler and Navier-Stokes solutions of the flow through three inlet/diffuser configurations with terminal shock systems are reported. Calculations without bleed indicate that the terminal shock location is very sensitive to the outflow back pressure. For cases where there are no available experimental results, it becomes difficult to estimate the back pressure that will result in a terminal shock. Estimates based on quasi-one-dimensional analysis are not found adequate for complex two-dimensional flows. It is found that since the flow downstream of the terminal shock is subsonic, and what happens at the outflow boundary affects the flow inside the inlet, enough of the subsonic diffuser must be modeled to accurately predict the terminal shock region. The diffuser portion should be fairly long with the outflow boundary occurring in a region of more or less uniform flow to be able to prescribe a uniform back pressure. The third configuration studied was investigated with and without incorporating bleed in the code. It is found that the use of bleed stabilizes the shock location and allows solutions which without bleed result in unstarting of the inlet. Comparisons are made with available experimental data.

Talcott, N. A., Jr.↗

Numerical simulation of the viscous flow fields over three-dimensional complicated geometries

A 'thin-layer' Navier-Stokes code capable of predicting steady state viscous flows is applied to complicated three-dimensional flow fields. The code is written in a generalized coordinate system, and a recently developed grid generation procedure is used for the flow-field discretization. Application is made to the vortical flow over a delta wing at high angle of attack, and the computed results are compared with experimental results. The results indicate that the present method can capture the physical phenomenon well. It is observed that a leading-edge separation vortex is formed over the wing, as is a secondary separation vortex near the leading edge. The flow field behind the trailing edge is also well described. Application is also made to the transonic flow over the Shuttle configuration. The result appears to be reasonable even though no experimental data are available for comparison. These results indicate that the present approach is capable of computing complicated three-dimensional flow fields.

Fujii, K.↗

The sensitivity of numerically simulated climates to land-surface boundary conditions

Eleven sensitivity experiments that were made with general circulation models to see how land-surface boundary conditions can influence the rainfall, temperature, and motion fields of the atmosphere are discussed. In one group of experiments, different soil moistures or albedos are prescribed as time-invariant boundary conditions. In a second group, different soil moistures or different albedos are initially prescribed, and the soil moisture (but not the albedo) is allowed to change with time according to the governing equations for soil moisture. In a third group, the results of constant versus time-dependent soil moistures are compared. Previously announced in STAR as N83-27536

Mintz, Y.↗

Mature thunderstorm cloud-top structure and dynamics - A three-dimensional numerical simulation study

The present investigation is concerned with results from an initial set of comparative experiments in a project which utilize a three-dimensional convective storm model. The modeling results presented are related to four comparative experiments, designated Cases A through D. One of two scientific questions considered involves the dynamical processes, either near the cloud top or well within the cloud interior, which contribute to organize cloud thermal patterns such as those revealed by IR satellite imagery for some storms having strong internal cloud-scale rotation. The second question is concerned with differences, in cloud-top height and temperature field characteristics, between thunderstorms with and without significant internal cloud-scale rotation. The four experiments A-D are compared with regard to both interior and cloud-top configurations in the context of the second question. A particular strong-shear experiment, Case B, is analyzed to address question one.

Schlesinger, R. E.↗

A preliminary study of numerical simulation of thermosolutal convection of interest to crystal growth

Calculations were performed with computer models using three types of finite difference methods of thermosolutal convection: horizontal heating of a container filled with a stably stratified solution, finger convection in a container, and finger convection in a horizontally infinite channel. The importance of including thermosolutal convection in models of crystal growth is emphasized, and the difficulties in doing so are demonstrated. It is pointed out that these difficulties, due primarily to the fine structure of the convection, may be partly overcome by the use of fine grids and implicit time stepping methods.

Miller, T. L.↗

Numerical simulations of fission

Hydrodynamic simulation techniques to the fission problem of the lunar origin were applied. It is indicated that, for fluids with the compressibility of stars, dynamic fission instabilities lead to spiral arm ejection of mass and angular momentum in the form of a ring or disk of debris, not as a single body. Some quantitative aspects of these results seem favorable to lunar origin by fission. Fission instabilities in fluid objects with a smaller degree of compressibility, more closely approximating terrestrial material are considered. Although the qualitative features are similar, there are significant quantitative differences for the stiffer equation of state. The implications of the results for the fission hypothesis of lunar origin are discussed. Evolutions illustrating possible approaches to instability are presented.

Durisen, R. H.↗

Numerical Simulation of North Atlantic Sea Ice Variability, 1951 - 1980

A two-level dynamic-thermodynamic sea ice model is used to simulate the growth, drift and decay of sea ice in the Northern Hemisphere during a 30-year period, 1951 to 1980. The model is run with a daily timestep on a 222 km grid and is forced by interanually varying fields of geostrophic wind and temperature-derived thermodynamic fluxes. The objective is a quantitative description of large-scale sea ice variability in terms of the dynamic and thermodynamic processes responsible for the fluctuations, especially in the North Atlantic where sea ice represents a substantial input of fresh water. The fields of ice velocity and thickness contain strong seasonal as well as interannual variability. The mean drift pattern results in thicknesses of 4 to 5 m offshore of northern Canada and Greenland, while winter thicknesses of approximately 2 m are typical of Alaskan. Eurasian and East Greenland coastal waters. The 30-year mean fields are characterized by ecessive ice in the North Atlantic during winter and by a summer retreat that is more rapid than observed.

Walsh, J. E.↗