Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEUTRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Using distributions to understand neutron and x-ray production in ICF ignition capsules and other high energy density plasmas

Here this paper describes how x-ray and neutron distribution functions can be useful tools to visualize the conditions measured in many types of plasma physics experiments. In particular, we model a standard inertial confinement fusion ignition capsule that consists of a Si doped plastic ablator surrounding a layer of deuterium–tritium (DT) ice as the yield varies from 18 kJ to 16.7 MJ and use the distribution functions to show that neutrons and high energy x rays (15 keV) are produced under similar conditions when the yield is low. However, as the capsule starts to support a propagating burn due to alpha heating, the x rays and neutrons are produced under somewhat different conditions in different parts of the plasma. In particular, the x-ray production takes place mainly in the hot plastic ablator for the full yield ignition capsule under quite different plasma conditions from the DT region producing the 14 MeV neutrons, which results in x-ray images with larger radii than the corresponding neutron images. These same distribution functions can be applied to many other plasma physics experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Bootstrap estimation of the effect of instrument response function uncertainty on the reconstruction of fusion neutron sources

Neutron imagers are important diagnostics for the inertial confinement fusion implosions at the National Ignition Facility. They provide two- and three-dimensional reconstructions of the neutron source shape that are key indicators of the overall performance. To interpret the shape results properly, it is critical to estimate the uncertainty in those reconstructions. There are two main sources of uncertainties: limited neutron statistics, leading to random errors in the reconstructed images, and incomplete knowledge of the instrument response function (the pinhole-dependent point spread function). While the statistical errors dominate the uncertainty for lower yield deuterium-tritium (DT) shots, errors due to the instrument response function dominate the uncertainty for DT yields on the order of 10 16 neutrons or higher. In this work, a bootstrapping method estimates the uncertainty in a reconstructed image due to the incomplete knowledge of the instrument response function. The main reconstruction is created from the fixed collection of pinhole images that are best aligned with the neutron source. Additional reconstructions are then built using subsets of that collection of images. Variations in the shapes of these additional reconstructions originate solely from uncertainties in the instrument response function, allowing us to use them to provide an additional systematic uncertainty estimate.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Measuring characteristic differences between high- and low-performing discharges on the MegaJOuLe Neutron Imaging Radiography (MJOLNIR) DPF

A dense plasma focus (DPF) is a compact coaxial plasma gun, which completes its discharge as a Z-pinch, producing short (<100 ns) pulses of ions, x rays, and/or neutrons. Lawrence Livermore National Laboratory recently constructed and began operating a new device, the MJOLNIR (MegaJOuLe Neutron Imaging Radiography) DPF, which is designed for single-pulse flash neutron radiography. This device has achieved neutron yields of up to 4.1×10 11 neutrons/pulse at 3.3 MA peak current, and higher-current commissioning is under way. Like most DPFs, MJOLNIR exhibits variable yields in some configurations. Here, we present evidence of the role of parasitic current paths within the gun in stochastically influencing the yield. First through “conditioning shots,” where new hardware has been introduced, we show that increased run-down and run-in speeds correlate with higher yields. These observations are consistent with current being delivered to the electrodes but not to the main plasma sheath, degrading the implosion-driving force. Once nominal conditions are established, we correlate low-performing discharges with smaller current dip and associated voltage spike for a fixed machine configuration. A snow-plow model is able to recreate small-magnitude current dips through the introduction of a parasitic current path, and particle-in-cell simulations establish how parasitic current paths lower the ion beam energy available to produce neutrons. Finally, we observe an increased likelihood of shots with low yield and smaller current dip with increasing fill pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Effects of fast and thermal neutron irradiation on Ga-polar and N-polar GaN diodes

Studies of the radiation tolerance and electrical behavior of gallium nitride (GaN) based devices are important for the next generation of high-power and high-voltage electronics that may be subjected to harsh environments such as nuclear reactor and fusion facilities, particle accelerators, and post-denotation environments. Here, in this work, we study the behavior of Ga-polar and N-polar GaN Schottky diodes before and after exposure to fast and thermal + fast neutrons. Temperature-dependent current–voltage (I–V) and circular transmission line method (CTLM) measurements were used to study the electrical characteristics. A strong reduction in reverse leakage current and an increase in differential resistance in forward bias were observed after neutron irradiation. Thermionic emission (TE), Frenkel–Poole (FP) emission, and Fowler–Nordheim (FN) tunneling models were used to explain the forward and reverse I–V characteristics pre- and post-irradiation. The study confirms that Ga-polar and N-polar GaN Schottky diodes exhibit different electrical responses to fast and thermal neutron irradiations. The reverse bias characteristics of N-polar diodes are less affected after the fast neutron irradiation compared to Ga-polar diodes, while in the forward bias region, the electrical behavior after fast and thermal neutron irradiations is similar in Ga-polar and N-polar diodes. The results indicate that the role of orientation should be considered in the design of GaN-based radiation-tolerant electronics.

42 ENGINEERING↗
DOE OSTI2023

Designing a boron nitride polyethylene composite for shielding neutrons

Neutrons are encountered in many different fields, including condensed matter physics, space exploration, nuclear power, and healthcare. Neutrons interacting with a biological target produce secondary charged particles that are damaging to human health. The most effective way to shield neutrons is to slow them to thermal energies and then capture the thermalized neutrons. These factors lead us to consider potential materials solutions for neutron shields that maximize the protection of humans while minimizing the shield mass and adapt well to modern additive manufacturing techniques. Using hexagonal boron nitride (hBN) as a capture medium and high-density polyethylene (HDPE) as a thermalization medium, we aim to design the optimal internal structure of h 10 BN/HDPE composites by minimizing the effective dose, which is a measure of the estimated radiation damage exposure for a human. Through Monte Carlo simulations in Geant4, we find that the optimal structure reduces the effective dose up to a factor of 72 over aluminum (Al) and up to a factor of 4 over HDPE; this is a significant improvement in shielding effectiveness that could dramatically reduce the radiation exposure of occupational workers.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A novel compact end-loaded piston cylinder cell for high pressure neutron scattering up to 5 GPa

Here, a miniature sized end-loaded piston cylinder cell with radial side windows for neutron scattering experiments is described. The principle of the bicone-shaped cylinders used was first presented by McWhan in 1974. The present cell is of compact portable design yet significantly enlarges the scattering angles. Its small size allows neutron scattering experiments at low temperatures. The bicone-shaped cylinders are made from various ceramics or a highly neutron-transmissive Ni-free Cr–Mo–V steel. Successful neutron scattering experiments up to 5 GPa have been demonstrated on the CORELLI single-crystal diffractometer and the VISION vibrational spectrometer of the Spallation Neutron Source at the Oak Ridge National Laboratory.

Neutrons↗
DOE OSTI2020

Changes of deformed shell gaps at N ~ 100 in light rare-earth, neutron-rich nuclei

There have been compelling evidences indicating that deformed single-particle states in neutron- rich regions are different from those in the stable region. It was pointed out that for the light rare- earth (60Nd, 62Sm, and 64Gd), neutron-rich (N = 98-102) nuclei, the Woods-Saxon potential, the Nilsson modified oscillator potential with "universal" parameters, and the folded Yukawa potential all failed to describe the correct ordering of neutron single-particle states. The location and size of deformed shell gaps in this mass region are under current debate. We propose a modification for the "standard" Nilsson parameters of Bengtsson and Ragnarsson introduced in 1985. The proposed N-dependent spin-orbit interaction brings an effect of the tensor force for the deformed potential, which causes dynamic changes in deformed shell gaps with neutron number and deformation. By applying the modified Nilsson parameters to generate deformed bases for the Projected Shell Model, we demonstrate that the calculation can explain consistently the current experimental data, including the ground state configuration in odd-neutron nuclei, upbending of the yrast moment of inertia at higher spins and the energies of 2-quasineutron 6- and 4- isomers in even-even nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Adaptive sampling for accelerating neutron diffraction-based strain mapping *

Abstract Neutron diffraction is a useful technique for mapping residual strains in dense metal objects. The technique works by placing an object in the path of a neutron beam, measuring the diffracted signals and inferring the local lattice strain values from the measurement. In order to map the strains across the entire object, the object is stepped one position at a time in the path of the neutron beam, typically in raster order, and at each position a strain value is estimated. Typical dwell times at neutron diffraction instruments result in an overall measurement that can take several hours to map an object that is several tens of centimeters in each dimension at a resolution of a few millimeters, during which the end users do not have an estimate of the global strain features and are at risk of incomplete information in case of instruments outages. In this paper, we propose an object adaptive sampling strategy to measure the significant points first. We start with a small initial uniform set of measurement points across the object to be mapped, compute the strain in those positions and use a machine learning technique to predict the next position to measure in the object. Specifically, we use a Bayesian optimization based on a Gaussian process regression method to infer the underlying strain field from a sparse set of measurements and predict the next most informative positions to measure based on estimates of the mean and variance in the strain fields estimated from the previously measured points. We demonstrate our real-time measure-infer-predict workflow on additively manufactured steel parts—demonstrating that we can get an accurate strain estimate even with 30%–40% of the typical number of measurements—leading the path to faster strain mapping with useful real-time feedback. We emphasize that the proposed method is general and can be used for fast mapping of other material properties such as phase fractions from time-consuming point-wise neutron measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Prompt Photofission Neutron Detection in Depleted Uranium

The detection of prompt photofission neutrons during active interrogation is a strong indication of the presence of special nuclear materials. However, the high-energy photons used for interrogation create a very challenging radiation environment for the detection of prompt fission signatures. These challenges include detector saturation and pulse pile-up. Additionally, there is an elevated neutron background that further challenges the detection of prompt fission neutrons. This background is produced because of (γ, Xn) photonuclear reactions in the surrounding high-Z materials. Here, we demonstrate the detection of prompt photofission neutrons in these challenging environments. Depleted uranium (DU) and lead targets are interrogated with bremsstrahlung photons produced by a 9-MV electron linear accelerator. Fast neutrons are detected with trans-stilbene organic detectors, and scintillation pulses are analyzed using a previously developed and demonstrated artificial neural network system. We observe a 5 times higher photoneutron count rate when the lead target is replaced with the DU target. Additionally, we observe a difference in the photoneutron light-output distributions of lead and DU. Here, this difference in the measured distributions is due to the difference in the photoneutron-energy spectra; DU photoneutrons are emitted with (γ, n) and watt-energy spectra, whereas lead photoneutrons are emitted with only the (γ, n) spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Passive and active neutron signatures of 233 U for nondestructive assay

The thorium fuel cycle is emerging as an attractive alternative to conventional nuclear fuel cycles, as it does not require the enrichment of uranium for long-term sustainability. The operating principle of this fuel cycle is the irradiation of 232 Th to produce 233 U, which is fissile and sustains the fission chain reaction. 233 U poses unique challenges for nuclear safeguards, as it is associated with a uniquely extreme γ-ray environment from 232 U contamination, which limits the feasibility of the γ-ray-based assay, as well as more conservative accountability requirements than for 235 U set by the International Atomic Energy Agency. Consequently, instrumentation used for safeguarding 235 U in traditional fuel cycles may be inapplicable. It is essential that the nondestructive signatures of 233 U be characterized so that nuclear safeguards can be applied to thorium fuel-cycle facilities as they come online. In this work, a set of 233 U 3 O 8 plates, containing 984 g 233 U, was measured at the National Criticality Experiments Research Center. A high-pressure 4 He gaseous scintillation detector, which is insensitive to γ-rays, was used to perform a passive fast neutron spectral signature measurement of 233 U 3 O 8 , and was used in conjunction with a pulsed deuterium-tritium neutron generator to demonstrate the differential die-away signature of this material. Furthermore, an array of 3 He detectors was used in conjunction with the same neutron generator to measure the delayed neutron time profile of 233 U, which is unique to this nuclide. These measurements provide a benchmark for future nondestructive assay instrumentation development, and demonstrate a set of key neutron signatures to be leveraged for nuclear safeguards in the thorium fuel cycle.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Detailed examination of astrophysical constraints on the symmetry energy and the neutron skin of 208 Pb with minimal modeling assumptions

We report the symmetry energy and its density dependence are pivotal for many nuclear physics and astrophysics applications, as they determine properties ranging from the neutron-skin thickness of nuclei to the crust thickness and the radius of neutron stars. Recently, PREX-II reported a value of 0.283 ± 0.071 fm for the neutron-skin thickness of 208 Pb, $R^{^{208}Pb}_{skin}$, implying a symmetry-energy slope parameter L of 106 ± 37 MeV, larger than most ranges obtained from microscopic calculations and other nuclear experiments. We use a nonparametric equation of state representation based on Gaussian processes to constrain the symmetry energy S 0 , L, and $R^{^{208}Pb}_{skin}$ directly from observations of neutron stars with minimal modeling assumptions. The resulting astrophysical constraints from heavy pulsar masses, LIGO/Virgo, and NICER favor smaller values of the neutron skin and L, as well as negative symmetry incompressibilities. Combining astrophysical data with chiral effective field theory (χEFT) and PREX-II constraints yields S 0 = 33.0$^{+2.0}_{-1.8}$ MeV, L = 53$^{+14}_{-15}$ MeV, and $R^{^{208}Pb}_{skin}$ = 0.17 $^{+0.04}_{-0.04}$ fm. We also examine the consistency of several individual χEFT calculations with astrophysical observations and terrestrial experiments. We find that there is only mild tension between χ EFT, astrophysical data, and PREX-II's $R^{^{208}Pb}_{skin}$ measurement (p value = 12.3%) and that there is excellent agreement between χEFT, astrophysical data, and other nuclear experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Exploring the sensitivity of charge-exchange ( p , n ) reactions to the neutron density distribution

The determination of the nuclear neutron properties suffers from uncontrolled uncertainties, which have attracted considerable attention recently, such as in the context of the PREX experiment. Our aim is to analyze the sensitivity of charge-exchange (p,n) reactions to the neutron density distribution ρ n and constrain the neutron characteristics in the nuclear structure models. Method: By combing the folding and the mean-field models, the nucleon-nucleus (N,A) potential can be obtained from the nuclear density distribution. Further, the (p,p) and (p,n) cross sections for 48 Ca and 208 Pb are calculated following the distorted-wave Born approximation method. As a result, compared with the (p,p) cross section, the effects of ρ n variation on the (p,n) cross section are significant, which is due to the impact of isovector properties. Based on the global folding model analyses of data, it is found that 48 Ca and 208 Pb have relatively large neutron skin thickness ΔR np . Results illustrate that the charge-exchange (p,n) reaction is a sensitive probe of ρ n . The results in this paper can offer useful guides for future experiments of neutron characteristics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Investigating the possible existence of hyper-heavy nuclei in a neutron-star environment

The synthesis of hyper-heavy elements is investigated under conditions simulating neutron star environment. The constrained molecular dynamics approach is used to simulate low energy collisions of extremely n-rich nuclei. A new type of the fusion barrier due to a “neutron wind” is observed when the effect of neutron star environment (screening of Coulomb interaction) is introduced implicitly. When introducing also a background of surrounding nuclei, the nuclear fusion becomes possible down to temperatures of 10 8 K and synthesis of extremely heavy and n-rich nuclei appears feasible. A possible existence of hyper-heavy nuclei in a neutron star environment could provide a mechanism of extra coherent neutrino scattering or an additional mechanism, resulting in x-ray burst or a gravitational wave signal and, thus, becoming another crucial process adding new information to the suggested models on neutron star evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Interplay of effects of neutron skins in coordinate space and proton skins in momentum space on emission of hard photons in heavy-ion collisions near the Fermi energy

Within an isospin- and momentum-dependent Boltzmann-Uehling-Uhlenbeck transport model, we investigate the hard photons emission from neutron-proton bremsstrahlung in the reaction system of 208 Pb + 208 Pb around Fermi energy. Effects of neutron skins in coordinate (r) space and proton skins in momentum (k) space on the time evolution, the angular distribution, and the transverse momentum spectra of hard photons with different energies are studied. It is shown that the emission of direct hard photons is sensitive to the neutron skin, which has larger effects for more energetic hard photons. Meanwhile, we find that the proton skins have an important influence on the emission of direct hard photons, and its effect is actually even larger than that of neutron skins. Furthermore, it needs to take the effect of proton skins into account when we determine the size of neutron skins by comparing transport mode predictions of hard photons with the corresponding experimental measurements.

190 ≤ A ≤ 219↗
DOE OSTI2024

Dynamical ejecta from binary neutron star mergers: Impact of a small residual eccentricity and of the equation of state implementation

Predicting the properties of the matter ejected during and after a neutron star merger is crucial to our ability to use electromagnetic observations of these mergers to constrain the masses of the neutron stars, the equation of state of dense matter, and the role of neutron star mergers in the enrichment of the Universe in heavy elements. Furthermore, our ability to reliably provide such predictions is however limited by a broad range of factors, including the finite resolution of numerical simulations, their treatment of magnetic fields, neutrinos, and neutrino-matter interactions, and the approximate modeling of the equation of state of dense matter. In this manuscript, we study specifically the role that a small residual eccentricity and different implementations of the same equation of state have on the matter ejected during the merger of a 1.3M ⊙ –1.4M ⊙ binary neutron star system. We find that a residual eccentricity e ~ 0.01, as measured ~ 4–6 orbits before merger, causes O(25%–30%) changes in the amount of ejected mass, mainly due to changes in the amount of matter ejected as a result of core bounces during merger. We note that O(1%) residual eccentricities have regularly been used in binary neutron star merger simulations as proxy for circular binaries, potentially creating an additional source of error in predictions for the mass of the dynamical ejecta.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Astrophysical Constraints on the Symmetry Energy and the Neutron Skin of 208 Pb with Minimal Modeling Assumptions

The symmetry energy and its density dependence are crucial inputs for many nuclear physics and astrophysics applications, as they determine properties ranging from the neutron-skin thickness of nuclei to the crust thickness and the radius of neutron stars. Recently, PREX-II reported a value of 0.283 ± 0.071 fm for the neutron-skin thickness of 208 Pb, implying a slope parameter L = 106 ± 37 MeV, larger than most ranges obtained from microscopic calculations and other nuclear experiments. We use a nonparametric equation of state representation based on Gaussian processes to constrain the symmetry energy S 0 , L, and $R^{^{208}Pb}_{skin}$ directly from observations of neutron stars with minimal modeling assumptions. The resulting astrophysical constraints from heavy pulsar masses, LIGO/Virgo, and NICER clearly favor smaller values of the neutron skin and L, as well as negative symmetry incompressibilities. Finally, combining astrophysical data with PREX-II and chiral effective field theory constraints yields S 0 = $33.0^{+2.0}_{-1.8}$ MeV , L = $53^{+14}_{-15}$ MeV, and $R^{^{208}Pb}_{skin} = 0.17^{+0.04}_{-0.04}$ fm.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Principles of Neutron Scattering from Condensed Matter. By Andrew T. Boothroyd. Oxford University Press, 2020. Pp. 512. Price GBP 55.00. ISBN 9780198862314.

Neutron scattering user facilities are increasingly used by ‘non-expert’ users, opening neutron scattering to new science fields and greatly increasing the scientific impact of these facilities. This book aims to bring the needed introduction to the expanding area of neutron scattering techniques to this wider audience of scientists using neutron scattering as part of their experimental portfolio. In my opinion, it completely succeeds in that goal and provides the right balance of introduction and in-depth discussion. I also like the layout of the book, with some figures and notes in the margin making it easy to read and navigate. As a ‘long-time’ neutron scatterer, I am excited to add this book to my book shelf.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Machine-learning-assisted automation of single-crystal neutron diffraction

Neutron scattering is a powerful but expensive technique to study materials and discover new matter. Advanced detector technology has significantly improved the efficiency of neutron experiments, increasing the complexity of neutron data reduction and analysis. Machine learning (ML) brings new directions for neutron diffraction data reduction and experiment operation. Here, this work presents an ML-assisted data reduction and analysis method for precise recognition of Bragg peaks and the corresponding regions of interest; it can then automatically screen and align a measured crystal using the recognized peaks, and subsequently plan and optimize the data collection with user-provided information and uncertainty quantification values of detected peaks. This method shows robust performance in different complex sample environments and enables automated single-crystal neutron diffraction.

47 OTHER INSTRUMENTATION↗