Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Influence of boron doping on magnetic properties and microwave characteristics of MnIr/FeCoB multilayers

A detailed investigation of the influence of B doping on the magnetic properties and high frequency characteristics of FeCoB/MnIr multilayered thin films was carried out. Exchange bias was found to decrease monotonically with B doping possibly due to less favorable of AF phase of MnIr in the samples with rich B concentration. However, with small amount of doping up to 9% of B concentration, the MnIr fcc (111) peaks become more prominent and the real part of permeability enhanced. Our results suggest no correlation between the structural phase of MnIr and the exchange bias. Also, the influences of B doping on several static and dynamic parameters, such as rotational magnetic anisotropy field, coercivity, saturation magnetization, resonance frequency, and effective damping factor are presented and discussed. Our results support the claim that the coercivity enhancement and the arising of rotational anisotropy may have the same physical origin.

36 MATERIALS SCIENCE↗

Characterization of Ni/Al multilayer on Si substrate by diffraction and reflectometry techniques

An ion beam deposited multilayer film of nominal thickness [Ni(200 Angst )/Al(100 Angst )]x5 on Si substrate has been characterized by X-Ray Diffraction(XRD), X-Ray Reflectivity (XRR) and Polarized neutron reflectivity(PNR). The present paper attempts to identify presence of any intermetallic compounds at the interfaces of the as-deposited sample. Structural parameters obtained from XRR and PNR are close to design values.

36 MATERIALS SCIENCE↗

Excitation wavelength dependent photoluminescence in structurally non-uniform Si/SiGe-island heteroepitxial multilayers

In nanometer-size Si/SiGe-island heteroepitxial multilayers grown on Si(001), low temperature photoluminescence spectra are observed that strongly depend on the excitation wavelength and show a strong correlation with structural properties revealed by transmission electron microscopy. These experimental results can be explained by assuming that the optically created carriers are strongly localized at Si/SiGe island heterointerfaces. We show that electron-hole pairs are generated and recombine within spatial regions mainly defined by the photoexcitation penetration depth, and that the estimated exciton diffusion length is notably short and comparable with the SiGe-island average size.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructured multilayered thin film barriers for Mg{sub 2}Si thermoelectric materials

The Mg{sub 2}Si-based alloys are promising candidates for thermoelectric energy conversion in the middle-high temperature range in order to replace lead compounds. The main advantages of silicide-based thermoelectrics are the nontoxicity and the abundance of their constituent elements in the earth crust. The drawback of such kind of materials is their oxygen sensitivity at high temperature that entails their use under vacuum or inert atmosphere. In order to limit the corrosion phenomena, nanostructured multilayered molybdenum silicide-based materials were deposited via RF magnetron sputtering onto stainless steel, alumina and silicon (100) to set up the deposition process and then onto Mg{sub 2}Si pellets. XRD, EDS, FE-SEM and electrical measurements at high temperature were carried out in order to obtain, respectively, the structural, compositional, morphological and electrical characterization of the deposited coatings. At the end, the mechanical behavior of the system thin film/Mg{sub 2}Si-substrate as a function of temperature and the barrier properties for oxygen protection after thermal treatment in air at high temperature were qualitatively evaluated by FE-SEM.

36 MATERIALS SCIENCE↗

Magnetron sputtering system for fabrication of X-ray multilayer optics

A specially designed DC/RF magnetron sputtering system has been installed for the development of large area x-ray multilayer (ML) optics at Indus synchrotron radiation facility. A brief description of the system configuration, automation and operating conditions are presented. The system has the capability of fabricating large area (300 Multiplication-Sign 100-mm{sup 2}) X-ray MLs with required accuracy, uniformity and reproducibility. Thin film growth suitable for fabrication of X-ray ML optics has achieved by optimizing the sputtering process parameters. The representative results are presented.

36 MATERIALS SCIENCE↗

Development of a soft x-ray diffractometer for a wideband multilayer grating with a novel layer structure in the 2-4 keV range

We have been developing a wavelength-dispersive soft x-ray spectrograph covering an energy region of 50-4000 eV to attach to a conventional electron microscope. Observation of soft x-ray emission in the 2-4 keV range needs a multilayer coated grating. In order to evaluate the performance of the optical component in the energy region, a goniometric apparatus has been newly developed and the preliminary performance has been tested using synchrotron radiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phonon engineering in nanostructures: Controlling interfacial thermal resistance in multilayer-graphene/dielectric heterojunctions

Using calculations from first principles and the Landauer approach for phonon transport, we study the Kapitza resistance in selected multilayer graphene/dielectric heterojunctions (hexagonal BN and wurtzite SiC) and demonstrate (i) the resistance variability (~50-700×10 -10 m 2 K/W) induced by vertical coupling, dimensionality, and atomistic structure of the system and (ii) the ability of understanding the intensity of the thermal transmittance in terms of the phonon distribution at the interface. Lastly, our results pave the way to the fundamental understanding of active phonon engineering by microscopic geometry design.

42 ENGINEERING↗

Inspecting The Effect Of Thermal Stress On The Interdiffusion Of Metal Multilayer Produced By Electron-Beam Gun Evaporation

Diffusion in thin film layers, especially in metal thin films, is caused reduction of the layers' quality, particularly reduction of the adhesion of layers. We have investigated the influence of deposition temperature on diffusion of atoms in Ag/Ni multilayers. For this purpose, silver and nickel layers were deposited in a vacuum by electron gun method at different temperatures and then Rutherford backscattering (RBS) analysis was used for studying the influence of increasing temperature on diffusion of the layers. Finally, laser damage threshold test was used for adhesion comparison of the layers.

36 MATERIALS SCIENCE↗

Exchange bias properties of [Co/CoO]{sub n} multilayers

In this study, the exchange bias properties of four polycrystalline multilayer stack samples of antiferromagnetic (AF) CoO and ferromagnetic (FM) Co in the form of [CoO/Co]{sub n} with n = 1, 2, 3, and 5 are reported. The samples were grown on top of Si (001) substrates by using magnetron sputtering method. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were used to determine the structural properties of the samples. XPS measurements of cobalt oxide layer revealed the coexistence of different phases in cobalt oxide as CoO and Co{sub 3}O{sub 4}, the latter of which lowers the blocking temperature. The blocking temperature is also affected by the finite size scaling effects observed in AF layers. In-plane ferromagnetic resonance (FMR) measurements revealed uniaxial in-plane magnetic anisotropy for the samples. Low temperature vibrating sample magnetometer measurements provided exchange bias with a stepwise character. Observed steps are believed to be due to magnetization reversals of individual FM layers with varying thicknesses, each of which is pinned through two interfaces from above and below with two AFM layers, except the uppermost FM Co layer with a single AFM neighbor.

36 MATERIALS SCIENCE↗

Negative effect of crystallization on the mechanism of laser damage in a HfO{sub 2}/SiO{sub 2} multilayer

Elucidation of the mechanisms of laser damage is indispensable in realizing high resistance mirrors for the next generation of ultra-short pulse high intensity lasers. In this study, the surface and a section of the laser-damaged area of a laser mirror were observed with a laser microscope and a transmission electron microscope (cross-sectional TEM), respectively. A grain boundary of HfO{sub 2} microcrystal was observed in the damaged area. This observation and an evaluation of the mirror's damage resistance showed that the formation of crystals in the multilayer mirror is one of the major determinants of damage resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale characterization of germanium isotopic multilayers by atom probe tomography

We report comparison of the interfacial sharpness characterization of germanium (Ge) isotopic multilayers between laser-assisted atom probe tomography (APT) and secondary ion mass spectrometry (SIMS). An alternating stack of 8-nm-thick naturally available Ge layers and 8-nm-thick isotopically enriched {sup 70}Ge layers was prepared on a Ge(100) substrate by molecular beam epitaxy. The APT mass spectra consist of clearly resolved peaks of five stable Ge isotopes ({sup 70}Ge, {sup 72}Ge, {sup 73}Ge, {sup 74}Ge, and {sup 76}Ge). The degree of intermixing at the interfaces between adjacent layers was determined by APT to be around 0.8 {+-} 0.1 nm which was much sharper than that obtained by SIMS.

36 MATERIALS SCIENCE↗

'Water window' sources: Selection based on the interplay of spectral properties and multilayer reflection bandwidth

Development of laser-produced plasma 'water window' sources poses a major challenge in x-ray research and most effort has focused on line sources for use with zone plate optics. Here, a comparison of carbon and nitrogen line emission with that from both 3d - 4f and 4d - 4f unresolved transition arrays shows that, at power densities available from 'table-top' solid-state lasers, 3d - 4f emission from zirconium plasmas is most intense, and calculations show that in an imaging system based on multilayer mirrors, for reflectance bandwidths >1% has superior performance than either line or broader-band sources. For bandwidths <1%, line sources are preferable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High resolution TOF - SIMS depth profiling of nano-film multilayers

We present the results of depth profiling studies conducted using an indigenously developed dual-beam high resolution Time-of-Flight Secondary Ion Mass Spectrometer (TOF-SIMS) on thinfilm W-C-W multilayer structure grown on Si substrate. Opto 8 layers could be clearly identified. Mixing of layers is seen which from analysis using roughness model calculations indicate a mixing thickness of about 2nm that correspond to the escape depth of secondary ions from the sample.

36 MATERIALS SCIENCE↗

Nanorods of Co/Pd multilayers fabricated by glancing angle deposition for advanced media

Perpendicular anisotropy magnetic nanorods composed of Co/Pd multilayers have been successfully fabricated by glancing angle deposition (GLAD) in a planetary sputtering system. Co and Pd layer thickness, ratio, and bilayer number were optimized for both normal and GLAD depositions. Scanning electron micrographs estimated the nanorods to be about 12 nm in diameter. M-H loops showed that the coercivity for the GLAD nanorods increased from 1.3 kOe for the normally deposited continuous films to 2.9 kOe for the GLAD nanorod array, a 123% increase.

36 MATERIALS SCIENCE↗

Damage of multilayer optics with varying capping layers induced by focused extreme ultraviolet beam

Extreme ultraviolet Mo/Si multilayers protected by capping layers of different materials were exposed to 13.5 nm plasma source radiation generated with a table-top laser to study the irradiation damage mechanism. Morphology of single-shot damaged areas has been analyzed by means of atomic force microscopy. Threshold fluences were evaluated for each type of sample in order to determine the capability of the capping layer to protect the structure underneath.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fatigue and failure responses of lead zirconate titanate multilayer actuator under unipolar high-field electric cycling

Lead zirconate titanate (PZT) multilayer actuators with an interdigital electrode design were studied under high electric fields (3 and 6 kV/mm) in a unipolar cycling mode. A 100 Hz sine wave was used in cycling. Five specimens tested under 6 kV/mm failed from 3.8 10^5 to 7 10^5 cycles, whereas three other specimens tested under 3 kV/mm were found to be still functional after 10^8 cycles. Variations in piezoelectric and dielectric responses of the tested specimens were observed during the fatigue test, depending on the measuring and cycling conditions. Selected fatigued and damaged actuators were characterized using an impedance analyzer or small signal measurement. A scanning acoustic microscope also was employed as a nondestructive tool to detect the presence of defects. Failed plates were subsequently sectioned, and the extensive cracks and porous regions were observed to be across the PZT layers. The results from this study have demonstrated that the high-field cycling can accelerate the fatigue of PZT stacks as long as the partial discharge is controlled. The small signal measurement can also be integrated into the large signal measurement to characterize the fatigue response of PZT stacks in a more comprehensive basis. The former can further serve as an experimental method to monitor the behavior of PZT stacks.

Zeng, Fan W↗

Ion effects in hydrogen-induced blistering of Mo/Si multilayers

The role that energetic (>800 eV) hydrogen ions play in inducing and modifying the formation of blisters in nanoscale Mo/Si multilayer samples is investigated. Such samples are confirmed to be susceptible to blistering by two separate mechanisms. The first is attributed to the segregation of H atoms to voids and vacancies associated with the outermost Mo layer, driving blister formation in the form of H{sub 2} filled bubbles. This process can occur in the absence of ions. A second blister distribution emerges when energetic ions are present in the irradiating flux. This is attributed to an ion-induced vacancy clustering mechanism that produces void blisters. The defects and strained states associated with the Mo-on-Si interfaces provide the preferred nucleation points for blistering in both cases. The effects of ions are ascribed to promotion of hydrogen uptake and mobility, in particular through the Si layers; to the generation of additional mobile species in the Si and Mo layers; and to the creation of new blister nucleation points. In addition to directly stimulating blistering via vacancy clustering, ions modify the development of H{sub 2}-filled blisters. This is most evident in the formation of multi-component structures due to overlapping delaminations at different layer interfaces. This affect is attributed to the introduction of active transport of hydrogen from the H{sub 2} filled blisters across the outermost Mo-on-Si interface to the underlying layers. Ion-induced variations in hydrogen uptake and distribution and in the rates of blister nucleation and growth produce lateral differences in blister size and areal number density that create a macroscopic concentric pattern across the surface.

36 MATERIALS SCIENCE↗

Effects of Co layer thickness and annealing temperature on the magnetic properties of inverted [Pt/Co] multilayers

The effects of Co layer thickness and annealing temperature on the perpendicular magnetic anisotropy (PMA) properties of inverted [Pt (0.2 nm)/Co (t{sub Co})]{sub 6} multilayers (where t{sub Co} indicates the thickness of the Co layer) have been investigated. The cross-sectional microstructure, as observed from the high-resolution transmission electron microscope images, shows a clear layered structure with atomically flat interfaces both in the as-deposited state as well as after annealing, indicating the interface effects for PMA. The effective PMA energy density (K{sub eff}) increases significantly with an increase in t{sub Co} from 0.2 to 0.28 nm and then becomes almost saturated with further increases in t{sub Co}, followed by a slight reduction at the highest Co thickness, t{sub Co} = 0.6 nm. In order to explain the t{sub Co} dependence on K{sub eff}, the intrinsic PMA energy density (K{sub i}) is calculated by additionally measuring a similar set of results for the saturation magnetization. The K{sub i} value increases nearly linearly with the increase in t{sub Co} from 0.2 to 0.5 nm, followed by saturation at a higher t{sub Co} value of 0.6 nm. Owing to a close relationship between K{sub i} and the quality of the interfaces, these results indicate a similar t{sub Co} dependence on the quality of the interfaces. This is further supported from the magnetic measurements of the samples annealed at the highest temperature of 500 °C, where a second phase is formed, which show a similar t{sub Co} dependence on the amount of the second phase. The K{sub i} value is nearly independent of the annealing temperature at t{sub Co} ≤ 0.4 nm, above which a substantial reduction is observed, when the annealing temperature exceeds 500 °C.

36 MATERIALS SCIENCE↗