Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Biological and Biomimetic Low-Temperature Routes to Materials for Energy Applications

New materials are needed to significantly improve the efficiencies of energy harnessing, transduction and storage, yet the synthesis of advanced composites and multi-metallic semiconductors with nanostructures optimized for these functions remains poorly understood and even less well controlled. To help address this need, we proposed three goals: (1) to further investigate the hierarchical structure of the biologically synthesized silica comprising the skeletal spicules of sponges that we discovered, to better resolve the role and mechanism of templating by the hierarchically assembled silicatein protein filament; (2) to extend our molecular and genetic analyses and engineering of silicatein, the self-assembling, structure-directing, silica-synthesizing enzyme we discovered and characterized, to better understand and manipulate the catalysis and templating of semiconductor synthesis,; and (3) to further investigate, scale up and harness the biologically inspired, low-temperature, kinetically controlled catalytic synthesis method we developed (based on the mechanism we discovered in silicatein) to investigate the kinetic control of the structure-function relationships in magnetic materials, and develop new materials for energy applications. The bio-inspired catalytic synthesis method we have developed is low-cost, low temperature, and operates without the use of polluting chemicals. In addition to direct applications for improvement of batteries and fuel cells, the broader impact of this research includes a deeper fundamental understanding of the factors governing kinetically controlled synthesis and its control of the emergent nanostructure and performance of a wide range of nanomaterials for energy applications.

36 MATERIALS SCIENCE↗

Unexpected Magnetic Domain Behavior in LTP-MnBi

Low-temperature-phase MnBi (LTP-MnBi) has attracted much interest as a potential rare-earth-free permanent magnet material because of its high uniaxial magnetocrystalline anisotropy at room temperature, K approximate to 10(7) ergs/cc, and the unusual increase of anisotropy with increasing temperature, with an accompanying increasing coercive force (H-C) with temperature. However, due to the complex Mn-Bi phase diagram, bulk samples of LTP-MnBi with the optimum saturation moment, similar to 75-76 emu/g have been achieved only with zone-refined single crystals. We have prepared polycrystalline samples of LTP-MnBi by induction melting and annealing at 300 degrees C. The moment in 70 kOe is 73.5 emu/g, but H-C is only 50 Oe. This is quite surprising-the high saturation moment indicates the dominating presence of LTP-MnBi. Therefore, an H-C c of some significant fraction of 2K/M-S approximate to 30 kOe would seem reasonable in this polycrystalline sample. By examining "Bitter" patterns, we show that the sample is composed of similar to 50 - 100 mu m crystallites. The randomly oriented crystallites exhibit the variety of magnetic domain structures and orientations expected from the hexagonal-structured MnBi with its strong uniaxial anisotropy. Clearly, the reversal of magnetization in the sample proceeds by the low-field nucleation of reversed magnetization in each crystallite, rather than by a wall-pinning mechanism. When the annealed sample was milled into fine particles, H-C increased by several orders of magnitude, as expected.

Nguyen, PK↗

Evolution of magnetic bubble domains in the uniaxial ferromaget CeRu 2 Ga 2 B inferred from the Hall effect and ac magnetic susceptibility

We study the Hall effect, AC magnetic susceptibility (χ ac ), and magnetic force microscopy of the uniaxial ferromagnet CeRu 2 Ga 2 B with a centrosymmetric crystal structure. We observe a finite topological Hall effect (THE) within the ordered phase, before the magnetization is polarized by applied field. By comparing the field dependences of the area fraction of the magnetic bubbles, the derivative of χ ac , and the THE signal, we deduce that the magnetic bubbles in CeRu 2 Ga 2 B evolve from the trivial to topological spin texture with field. Our findings enable the expansion of the search for magnetic materials hosting topological spin textures to include uniaxial ferromagnets and open a new possibility to tailor the topological spin texture.

AC magnetic susceptibility↗

Advanced Instrumentation for Extreme Environments

The Department of Energy (DOE) Office of Nuclear Energy (NE) is pursuing embedded instrumentation and controls (I&C) technology for next generation nuclear power generation applications. Embedded systems encompass a wide range of configurations and technologies; we define embedding in this instance as the integration of the sensors and the control system design into the component design using a systems engineering process. Embedded I&C systems are often an essential part of developing new capabilities, improving reliability, enhancing performance, and reducing operational costs. The new intrinsically safe, more efficient, and cost effective reactor technologies (Next Generation Nuclear Plant and Small Modular Reactors) require the development and application of new I&C technologies. These new designs raise extreme environmental challenges such as high temperatures (over 700 C) and material compatibility (e.g., molten salts). The desired reliability and functionality requires measurements in these extreme conditions including high radiation environments which were not previously monitored in real time. The DOE/NE Nuclear Energy Enabling Technologies (NEET) program currently has several projects investigating I&C technologies necessary to make these reactor designs realizable. The project described in this paper has the specific goal of investigating embedded I&C with the following objectives: 1.Explore and quantify the potential gains from embedded I&C improved reliability, increased performance, and reduced cost 2.Identify practical control, sensing, and measurement techniques for the extreme environments found in high-temperature reactors 3.Design and fabricate a functional prototype high-temperature cooling pump for molten salts represents target demonstration of improved performance, reliability, and widespread usage There are many engineering challenges in the design of a high-temperature liquid salt cooling pump. The pump and motor are in direct contact with molten fluoride salt at 700 C (1,292 F) as part of a reactor cooling loop. The motor-pump combination during normal operation would be red-hot (Figure 1). This environment challenges every facet of the design including seals, wiring, magnetic materials, and sensors. In this paper, we discuss the challenges of sensor design in extreme environments and specifically the sensor design for a high-temperature fluoride salt coolant pump. This pump will be used as a test-bed for embedded I&C development and validation in extreme environments.

Extreme Environments↗

EuAuSb: An odd-parity helical variation of altermagnetism

EuAuSb is a triangular-lattice Dirac semimetal in which a topological Hall effect has been observed to develop in association with a magnetically ordered phase. Our single-crystal neutron diffraction measurements have identified an incommensurate helical order in which individual ferromagnetic Eu 2+ layers rotate in-plane by ∼ 120° from one layer to the next. An in-plane magnetic field distorts the incommensurate order, eventually leading to a first order transition to a state that is approximately commensurate and that is continuously polarized as the bulk magnetization approaches saturation. From an analysis of the magnetic diffraction intensities versus field, we find evidence for a dip in the ordered in-plane moment at the same field where the topological Hall effect is a maximum, and we propose that this is due to field-induced quantum spin fluctuations. Our electronic structure calculations yield exchange constants compatible with the helical order and show that the bands near the Fermi level lose their spin degeneracy via a mechanism similar to that in the collinear altermagnets. In conclusion, we find that, unlike the even symmetry seen in the altermagnets, the spin splitting in EuAuSb has odd-wave symmetry similar to that recently found in a number of coplanar magnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-fidelity dimer excitations using quantum hardware

The quantum simulation of entangled spin systems can play a central role in quantum magnetic materials discovery. Additionally, the simulation of spectroscopic signatures, such as the dynamical structure factor accessed in inelastic neutron scattering (INS), necessitates a long timescale for circuit evolution. This is because the energy resolution is directly related to the time over which the circuit could be meaningfully evolved. However, canonical Trotterization requires deep circuits precluding such long-time evolution—even for a small number of qubits. Here, in this study, we demonstrate “direct” resource efficient fast-forwarding (REFF) measurements with short-depth circuits that can be used to capture longer time dynamics of spin Hamiltonians. We showcase the results of the dynamics of a quantum spin dimer, the basic quantum unit of emergent many-body spin systems, whose density of states we simulate accurately. The long temporal evolution and measurement of the two-spin correlation functions enable the calculation of the dynamical structure factor S⁡(Q = 0, ω) measured in the neutron scattering cross-section. We exhibit the clarity of the triplet gap and the triplet splitting of the quantum dimer with class-leading fidelity that enables comparison to experimental neutron data. Our results on current circuit hardware outline an important workflow to predict and benchmark against the outputs of INS experiments of quantum magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long lifetime of thermally excited magnons in bulk yttrium iron garnet

Spin currents are generated within the bulk of magnetic materials due to heat flow, an effect called intrinsic spin Seebeck. This bulk bosonic spin current consists of a diffusing thermal magnon cloud, parametrized by the magnon chemical potential (μ m ), with a diffusion length of several microns in yttrium iron garnet (YIG). Transient optothermal measurements of the spin-Seebeck effect (SSE) as a function of temperature reveal the time evolution of μ m due to intrinsic SSE in YIG. The interface SSE develops at times <2 ns while the intrinsic SSE signal continues to evolve at times >500 μs, dominating the temperature dependence of SSE in bulk YIG. Time-dependent SSE data are fit to a multitemperature model of coupled spin/heat transport using the finite-element method (FEM), where the magnon spin lifetime (τ) and magnon-phonon thermalization time (τ mp ) are used as fit parameters. From 300 to 4 K, τ mp ) varies from 1 to 10 ns, whereas tau varies from 2 to 60 μ s with the spin lifetime peaking at 90 K. At low temperature, a reduction in τ is observed consistent with impurity relaxation reported in ferromagnetic resonance measurements. Finally, these results demonstrate that the thermal magnon cloud in YIG contains extremely low-frequency magnons (similar to 10 GHz), providing spectral insight to the microscopic scattering processes involved in magnon spin/heat diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Doping by Charge Transfer at LaFeO 3 /Sm 2 CuO 4 Epitaxial Interfaces

The breakdown of the lattice translational invariance symmetry that occurs at complex oxide interfaces may profoundly modify their electronic structure, leading to interfacial states with properties drastically different from those of the superlattice individual components. The appearance of a conducting two dimensional (2D) electron gas at the interface between two insulating oxides and induced magnetism in a non-magnetic material are just two among many fascinating examples. [ 1 8 ] One of the key factors underlying novel properties is the modifi cation of the doping and orbital occupancy near those interfaces, which may result from charge transfer processes. [ 3 , 9 11 ] If materials used in heterostructures have different work functions, a non-equilibrium situation will be created at the interface and charge will be transferred until the chemical potential levels off. [ 12 ] The use of such phenomena to modify doping in heterostructures has been proposed theoretically as a new route to avoid the quenched disorder that inevitably accompanies the chemical doping. At the interface between a Mott insulating parent compound of the high critical temperature superconductor (HTSC) family and a suitable material that would act as the charge donor, electron doped phases could be stabilized which would eventually turn metallic and perhaps superconducting. [ 12 , 13 ] Such charge transfer processes have been observed at interfaces involving copper oxides such as La 0.7 Ca 0.3 MnO 3 / YBa 2 Cu 3 O 7 , [ 14 ] La 2 x Sr x CuO 4 /La 2 CuO 4 [ 15 ] and SrTi 1 x Nb x O 3 / Sm 2 CuO 4 . [ 16 ] While a novel 2D superconducting state was found at the La 2-x Sr x CuO 4 /La 2 CuO 4 interface, [ 17 ] the effect of doping by charge transfer could not be examined in the other two cases due to the detrimental effect on the YBa 2 Cu 3 O 7 superconductivity of the spin polarized electrons from La 0.7 Ca 0.3 MnO 3 in one case and due to the conducting nature of the SrTi 1 x Nb x O 3 in the other case, which obscures changes in the conducting properties of the interface layer. In this paper, the structural and

Bruno, Flavio Y.↗

Mesoscale Magnetostructural Phase Separation in Fe‐deficient Fe 5 GeTe 2

Two-dimensional van der Waals ferromagnet Fe 5-x GeTe 2 (F5GT) is promising for spintronic applications due to its high Curie temperature, layered structure, and ability to host complex magnetic textures. However, the origin of its sample-dependent magnetic anisotropy remains unclear, hindering control of its magnetic behavior. Here, we use spatially resolved cryogenic scanning transmission electron microscopy (STEM) to correlatively map magnetism, lattice structure, and chemistry across atomic-to-micron scales. We reveal that only mesoscale, not nanoscale, inclusions of a Fe-deficient secondary phase significantly modify magnetic behavior, establishing a previously unrecognized critical length scale. This phase separation, induced by quenching, leads to in-plane magnetic anisotropy, while slow cooling confines separation to a few nanometers and preserves out-of-plane anisotropy. These findings reconcile prior inconsistencies and establish a predictive framework for tuning magnetism in F5GT through thermal processing, with broader implications for controlling anisotropy in other two-dimensional magnetic materials.

2D ferromagnets↗

Revealing Robust Room Temperature Ferromagnetism in Gd‐Doped Few‐Layered MoS 2 Thin Films

2D MoS 2 holds great promise for spintronics, yet is limited by intrinsic diamagnetism. This study demonstrates inducing ferromagnetic behavior in MoS 2 films doped with 0.47% Gd, achieving an ultrahigh saturation magnetization of 454 emu/cm 3 in a few‐layered film over 11‐times higher than bulk films (40 nm). Raman spectroscopy, X‐ray photoelectron spectroscopy, X‐ray magnetic circular dichroism, and density functional theory (DFT) calculations reveal an interplay between Gd dopants and Mo, S vacancies (V 1Mo+2S ), leading to the formation of bound magnetic polarons (BMPs) that drive ferromagnetic ordering. H 2 S annealing and DFT calculations reveal that defect healing reduces the saturation magnetization by 83%. High sulfur migration barrier in few‐layered films helps preserve BMPs, thereby sustaining ferromagnetism, whereas lower migration barriers in bulk films lead to suppression. These findings highlight the synergy between Gd doping and defect engineering in achieving ultrahigh room‐temperature ferromagnetism, offering a scalable strategy for developing high‐performance 2D magnetic materials for spintronic applications.

36 MATERIALS SCIENCE↗

Nonvolatile Electric Control of the Anomalous Hall Effect in an Ultrathin Magnetic Metal

Abstract Low‐dimensional magnetism has been boosted by the recent discovery of the ferromagnetism in layered two‐dimensional (2D) semiconductors. Although the macroscopic magnetic moments of 2D ferromagnets are weak, the anomalous Hall effect (AHE) can serve as a versatile electric probe to their magnetic properties. Here, the nonvolatile electric‐field manipulation of the AHE in an ultrathin metallic ferromagnet with perpendicular magnetic anisotropy at room temperature is reported, which is achieved by the electrostatic modulation of the longitudinal resistivity via a ferroelectric substrate without varying magnetization. Therefore, this work demonstrates an electric‐field‐controlled room‐temperature memory device based on the zero‐magnetic‐field anomalous Hall resistance of an ultrathin ferromagnet. More importantly, the experimental results disentangle magnetization and anomalous Hall resistance. As a result, the study reveals a linear decrease of anomalous Hall conductivity with normal conductivity, which is distinct from previous scaling relations. Accordingly, this work manifests a universe avenue to harnessing the AHE in low‐dimensional magnetic materials.

Feng, Zexin↗

On the Extended Series of Quaternary Zintl Phases Ca13REMnSb11 (RE = La–Nd, Sm, Gd–Dy)

Eight new compounds with a general formula Ca 14– x RE x MnSb 11 ( RE = La–Nd, Sm, Gd–Dy; x ≈ 1) were synthesized by the molten flux method and their structures were established via single‐crystal X‐ray diffraction. The overarching goal of this study was to investigate the effect of electron doping, via substitution of RE 3+ at Ca 2+ sites, on the crystal structure and physical properties of Ca 14 MnSb 11 , which is a candidate for thermoelectric applications. All studied phases are isostructural, and crystallize in the tetragonal body‐centered space group I 4 1 / acd (Ca 14 AlSb 11 structure type, Pearson index tI 208). The structure is made up of MnSb 4 10– tetrahedra, randomly mixed Ca 2+ and RE 3+ cations, Sb 3– anions, and linear Sb 3 7– polyanions. Comprehensive structural work confirms high rare‐earth metal content with Ca 2+ / RE 3+ randomly mixed on all four cation sites, with the caveat that the larger RE atoms (La–Nd) prefer to occupy the Ca2 site, while the smaller RE atoms (Sm, Gd, Tb, and Dy) preferably occupy the Ca1 site. Nearly phase‐pure polycrystalline samples have been synthesized using solid‐state reactions, and have been used for physical property measurements. The resistivities of the bulk Ca 14– x RE x MnSb 11 ( RE = La–Nd, Sm, Gd; x ≈ 1) samples reveal semiconducting behavior, consistent with the notion of electron doping in the parent p ‐type Ca 14 MnSb 11 material. Magnetic susceptibilities suggest complex magnetic ordering at temperatures below ca. 50 K, likely originating from coupling between two or more magnetic sub‐lattices.

Prakash, Jai↗

Nanobiocatalysis for protein digestion in proteomic analysis

The process of protein digestion is a critical step for successful protein identification in the bottom-up proteomic analysis. To substitute the present practice of in-solution protein digestion, which is long, tedious, and difficult to automate, a lot of efforts have been dedicated for the development of a rapid, recyclable and automated digestion system. Recent advances of nanobiocatalytic approaches have improved the performance of protein digestion by using various nanomaterials such as nanoporous materials, magnetic nanoparticles, and polymer nanofibers. Especially, the unprecedented success of trypsin stabilization in the form of trypsin-coated nanofibers, showing no activity decrease under repeated uses for one year and retaining good resistance to proteolysis, has demonstrated its great potential to be employed in the development of automated, high-throughput, and on-line digestion systems. This review discusses recent developments of nanobiocatalytic approaches for the improved performance of protein digestion in speed, detection sensitivity, recyclability, and trypsin stability. In addition, we also introduce the protein digestions under unconventional energy inputs for protein denaturation and the development of microfluidic enzyme reactors that can benefit from recent successes of these nanobiocatalytic approaches.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of Magnetization as a Function of Temperature for CoMn{sub 1−x}Fe{sub x}Ge

Our experimental measurements for the magnetization M as a function of temperature are analyzed for the multilayer structure of CoMn{sub 1−x}Fe{sub x}Ge for x = 0.085 and x = 0.12 at constant magnetic fields of 3, 5, and 7 T. For this analysis, a power-law formula is used below the transition temperature T{sub C} for these compositions and the values of the critical exponent β for the magnetization M (order parameter) are determined. Our analysis indicates that a first order transition at lower concentrations (x = 0.085) changes toward a second order at higher concentrations (x = 0.12) at constant magnetic fields (3, 5, and 7 T) for the multilayer CoMn{sub 1−x}Fe{sub x}Ge, as observed experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of Intrinsic and Magnetic Field-Induced Magnetic Anisotropies in Strongly Phase-Separated Manganite Thin Films

Single crystalline thin film (∼ 100 nm) of La{sub 0.18}Pr{sub 0.40}Ca{sub 0.42}MnO{sub 3} is grown on (001) oriented LaAlO{sub 3} substrates and the evolution of anisotropy associated with the supercooling behaviour of the magnetic liquid is studied as a function of temperature and magnetic field. The angle-dependent magnetization measurements ascertain that the easy magnetic axis lies in the plane of the film while the hard axis is along the plane normal. The ratio of the easy and hard axes magnetizations (M{sub ||} and M{sub ⊥}) measured at 10 K, viz., M{sub ||}/M{sub ⊥} (10 K) = 2.6, confirms the strongly anisotropic nature of the film. The easy axis ferromagnetic (FM) transition temperature (T{sub C}) is smaller than that along the hard axis. The giant hysteresis in FCC–FCW M–T, which manifests the magnetic liquid behaviour of the strongly phase-separated manganites is appreciably narrowed along the hard axis. The strain glass state is also less dominant along the easy axis. The analysis of the M–H data brings out that the easy axis remanence (M{sub r||}) shows a nonlinear temperature dependence, while the one corresponding to the hard axis (M{sub r⊥}) shows a nearly linear behaviour. The coercivity (H{sub C}) follows a law of the type H{sub C}(T)=H{sub C}(0)(1−AT{sup b}). The value of exponent b ∼ 0.5 for single-domain particles, but in the present case, the best fit to the experimental data yields the exponent b ≈ 0.25 for both H{sub C||} and H{sub C⊥}. The smaller value of the exponent is attributed to the non-canonical nature of the ferromagnetic state and the associated strongly phase-separated nature of the LPCMO thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Macro- and Nanoscale Magnetic Anisotropy of FeNi(P) Micropillars in Polycarbonate Membrane

Macroscopic and local magnetic anisotropy of the FeNi(P) pillars deposited using electroless plating in the pores of the nuclear track-etched polycarbonate membrane has been studied. The alloy fills the pores and forms a nail-shaped pillar. The macroscopic easy magnetization axis was found to be perpendicular to the membrane plane due to magnetic shape anisotropy. The macroscopic magnetic anisotropy constant decreases with decreasing pillar diameter from 0.4 to 0.1 μm supposedly due to increase of the pillar cap contribution. Approach to magnetic saturation analysis indicates that the order in local easy magnetization axis is localized on a nanoscale. The correlation length of the local easy axis and the local magnetic anisotropy field in (Fe{sub 100−x}Ni{sub x}){sub 98}P{sub 2} pillars of different compositions with diameter of 0.4 μm are studied.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Magnetic Properties Study of Fe{sub 50}Si{sub 50} Powders with Different Microparticle Sizes

The structural properties and magnetic behavior of the Fe{sub 50}Si{sub 50} system were determined using X-ray diffraction (XRD), Mössbauer spectrometry (MS), vibration sample magnetometry (VSM), and scanning electron microscopy (SEM). Samples of Fe{sub 50}Si{sub 50} were melted using an arc furnace, then powder was obtained through a diamond file, and this was passed through different sieves. Finally, nanoparticles of this system were produced by means of surfactant-assisted mechanical alloying. XRD confirmed the presence of the FeSi (CS) and Fe{sub 5}Si{sub 3} structural phases. By transmission MS, it was observed that at room temperature the spectrum is formed by three general components, a doublet associated with the FeSi (CS) phase and two sextets associated with the Fe{sub 5}Si{sub 3} phase; this gives the idea of the distribution of the sizes of particles present in the sample. By VSM, the soft magnetic behavior of the system was ratified and it was determined that the biggest saturation magnetization corresponds to the smallest particles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of Critical Behavior and Magnetocaloric Effect in Nd{sub 1− x} Sr{sub x}MnO{sub 3} Compounds

In this paper, we have investigated the influence of substitution of Nd by Sr on the structural, magnetic, and magnetocaloric properties of Nd{sub 1 − x}Sr{sub x}MnO{sub 3} (x = 0.3 and x = 0.4). These compounds were prepared using the solid state method. The structural, morphological, and magnetic properties of our system were characterized by XRD, MEB techniques, and a magnetometer for magnetic characterization. The Rietveld refinement has revealed the coexistence of both Pnma orthorhombic and R-3c rhombohedral phases. The magnetic data indicate that the compounds exhibit a continuous paramagnetic (PM) to ferromagnetic (FM) phase transition. In addition, the critical behavior in both compounds associated with the magnetic phase transition has been studied by the magnetization isotherms. The critical exponents are deduced using various techniques such as the modified Arrott plot, Kouvel–Fisher plot, and critical isotherm technique. Finally, the results obtained of the magnetocaloric effect are in agreement with the reported values of previous researches. These results show that our samples can be used as a magnet refrigerant at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗