Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FILM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Epitaxial growth and ferrimagnetic properties of Mn film on GaSb(100)

We report on the epitaxial stabilization and magnetic properties of Mn films on GaSb(100) using molecular beam epitaxy, a follow-up to our previous work on the growth of Mn films on GaAs(100) [Phys. Rev. B 79, 045309 (2009)]. A strong ferrimagnetic ordering was observed which was attributed to the largely expanded lattice parameter resulting from the lattice mismatch with substrate and the enhanced thermal energy with increasing growth temperature. The observed magnetic moment of 1.16{mu}{sub B}/Mn atom was several times larger than that observed in the Mn/GaAs(100) films due to the lattice constant difference of substrates. The in-plane magnetoresistance behavior demonstrated the magnetic anisotropy that might result from the slightly distorted cubic structure of {alpha}-Mn phase under low-dimensional growth.

36 MATERIALS SCIENCE↗

Effect of RF power on structural and magnetic properties of La doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films

Effect of RF power on structural and magnetic properties of lanthanum (La{sup 3+}) doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films grown on p-Si substrates by radio frequency (RF) magnetron sputtering has studied in this investigation. It is observed that the sputtering power affects the crystalline nature and magnetic properties of grown thin films. X-ray diffraction and Raman spectrum confirms that the Bi{sub 2}Fe{sub 4}O{sub 9} (BFO) thin films were crystallized well with orthorhombic structure. The BFO thin films which was prepared at sputtering power of 100 W have good crystallinity than those prepared at 40 W. The magnetic properties are investigated by vibrating sample magnetometer. The magnetic hysteresis perceptive loop shows that the anti-ferromagnetic behavior of the sample at room temperature. These results confirms that the crystallinity and magnetic properties of the BFO thin films were enhanced at the higher sputtering power (100 W).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness dependent itinerant ferromagnetism in ultrathin Ba-doped SrRu O 3 films

The electronic and magnetic properties in AB⁢O 3 perovskite oxides are extremely sensitive to lattice structure, but also to dimensionality, such as the thickness in thin film-form. Here, we report the thickness-dependent electromagnetic properties of ultrathin epitaxially stabilized Sr 1-x ⁢Ba x ⁢Ru⁢O 3 (x = 0.08, 0.2) thin films on a SrTi⁢O 3 (001) substrate. The results reveal that the barium doping (0.08 ≤ x ≤ 0.20) reduces Ru⁢O 6 orthorhombic distortions existing in SrRu⁢O 3 and induces a tetragonal distortion, as evidenced by out-of-plane lattice expansion. A metal-to-insulator transition, accompanied by a ferromagnetic to nonmagnetic transition occurs with reducing film thickness from 10 to 3 unit cells for both x = 0.08 and 0.2, regardless of the doping level. The results suggest that the effects of compositional vacancies and surface/interface contributions introduced via dimensional confinement are more dominant than A-site chemical disorder or structural distortion for the loss of metallicity and ferromagnetism in ultra-thin epitaxial films.

36 MATERIALS SCIENCE↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thin-Film Three-Layer Fe/Poly(diphenylene phthalide)/Fe Systems: Structural Properties and Behavior in Magnetic Fields

The structural and magnetic properties of thin-film Fe/poly(diphenylene phthalide) (PDP)/Fe systems are studied, along with the behavior of these systems in magnetic fields. The mean surface roughness of the studied samples is around 5–8 nm, and local near-surface magnetic properties show variation within 10%. The samples are characterized by two-step hysteresis loops, the step size depending on the thickness of the polymer layer and the difference in the thickness between the magnetic layers. The results are explained by the effects the exchange interaction between the magnetic layers, mediated by the PDP interlayer, has on the behavior of our samples in a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, magnetic, and transport properties of Fe-doped CoTiSb epitaxial thin films

Epitaxial intrinsic and Fe-doped CoTiSb thin films with C1{sub b} structure were grown on MgO(100) substrates by magnetron sputtering. The semiconducting-like behavior in both intrinsic and Fe-doped thin films was demonstrated by temperature dependence of longitudinal resistivity. The Fe-doped CoTiSb films with a wide range of doping concentrations can maintain semiconducting-like and magnetic properties simultaneously, while the semiconducting behavior is weakening with the increasing Fe concentration. For 21 at. % Fe-doped film, low lattice magnetic moment (around 0.65 μ{sub B}) and high resistivity (larger than 800 μΩ cm) are beneficial to its application as a magnetic electrode in spintronic devices. Anomalous Hall effect of 21 at. % Fe-doped film was also investigated and its behaviors can be treated well by recent-reported anomalous Hall scaling including the contribution of spin-phonon skew scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic and magnetic properties of TTF and TCNQ covered Co thin films

Interfacial effects like orbital hybridization and charge transfer strongly influence the transfer of spins from ferromagnetic metals to organic semiconductors and can lead to the formation of interfacial states with distinct magnetic properties. The changes in the electronic and magnetic properties of a thin Co film upon adsorption of a layer of either the molecular organic electron donor tetrathiafulvalene (TTF) or the acceptor tetracyanoquinodimethane (TCNQ) have been investigated by X-ray absorption spectroscopy and X-ray magnetic circular dichroism using synchrotron radiation. Clear differences between the spectra of the adsorbed molecules and the neutral molecules show the hybridization of the molecular orbitals with the Co interface. Deposition of both organic materials leads to a small increase of the ratio of the orbital magnetic moment to the spin magnetic moment of the Co atoms at the interface. The main effect of overlayer deposition is a modification of the magnetic hysteresis of the Co film: The TCNQ slightly reduces the coercivity of the Co, while the TTF increases the coercivity by a factor of ∼1.5. These complementary effects of either a molecular organic electron donor or acceptor on the interfacial properties of a metal ferromagnetic thin film are a promising result for the controlled modification of the magnetic structure of hybrid interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Solution Growth of Magnetic Nitrides

Magnetic nitrides, if manufactured in bulk form, would provide designers of transformers and inductors with a new class of better performing and affordable soft magnetic materials. According to experimental results from thin films and/or theoretical calculations, magnetic nitrides would have magnetic moments well in excess of current state of the art soft magnets. Furthermore, magnetic nitrides would have higher resistivities than current transformer core materials and therefore not require the use of laminates of inactive material to limit eddy current losses. However, almost all of the magnetic nitrides have been elusive except in difficult to reproduce thin films or as inclusions in another material. Now, through its ability to reduce atmospheric nitrogen, the electrochemical solution growth (ESG) technique can bring highly sought after (and previously inaccessible) new magnetic nitrides into existence in bulk form. This method utilizes a molten salt as a solvent to solubilize metal cations and nitrogen ions produced electrochemically and form nitrogen compounds. Unlike other growth methods, the scalable ESG process can sustain high growth rates (~mm/hr) even under reasonable operating conditions (atmospheric pressure and 500 °C). Ultimately, this translates into a high throughput, low cost, manufacturing process. The ESG process has already been used successfully to grow high quality GaN. Below, the experimental results of an exploratory express LDRD project to access the viability of the ESG technique to grow magnetic nitrides will be presented.

36 MATERIALS SCIENCE↗

Fabrication of Scaffold-Based 3D Magnetic Nanowires for Domain Wall Applications

Three-dimensional magnetic nanostructures hold great potential to revolutionize information technologies and to enable the study of novel physical phenomena. In this work, we describe a hybrid nanofabrication process combining bottom-up 3D nano-printing and top-down thin film deposition, which leads to the fabrication of complex magnetic nanostructures suitable for the study of new 3D magnetic effects. First, a non-magnetic 3D scaffold is nano-printed using Focused Electron Beam Induced Deposition; then a thin film magnetic material is thermally evaporated onto the scaffold, leading to a functional 3D magnetic nanostructure. Scaffold geometries are extended beyond recently developed single-segment geometries by introducing a dual-pitch patterning strategy. Additionally, by tilting the substrate during growth, low-angle segments can be patterned, circumventing a major limitation of this nano-printing process; this is demonstrated by the fabrication of ‘staircase’ nanostructures with segments parallel to the substrate. The suitability of nano-printed scaffolds to support thermally evaporated thin films is discussed, outlining the importance of including supporting pillars to prevent deformation during the evaporation process. Employing this set of methods, a set of nanostructures tailored to precisely match a dark-field magneto-optical magnetometer have been fabricated and characterized. This work demonstrates the versatility of this hybrid technique and the interesting magnetic properties of the nanostructures produced, opening a promising route for the development of new 3D devices for applications and fundamental studies.

36 MATERIALS SCIENCE↗

Local vibrational modes competitions in Mn-doped ZnO epitaxial films with tunable ferromagnetism

We reported spectroscopic investigations of high quality Mn-doped ZnO (ZnMnO) films grown by oxygen plasma-assisted molecular beam epitaxy. Raman scattering spectra revealed two local vibrational modes (LVMs) associated with Mn dopants at 523 and 712 cm{sup −1}. The LVMs and magnetic properties of ZnMnO films can be synchronously modulated by post annealing processing or by introducing tiny Co. The relative intensity of two LVMs clearly shows competitions arising from uncompensated acceptor and donor defects competition for ferromagnetic and nonmagnetic films. The experimental results indicated that LVM at 523 cm{sup −1} is attributed to Mn—(Zinc-vacancy) complexes, while LVM at 712 cm{sup −1} is attributed to Mn—(Oxygen-vacancy) complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manipulate the Electronic and Magnetic States in NiCo 2 O 4 Films through Electric-Field-Induced Protonation at Elevated Temperature

Ionic-liquid-gating- (ILG-) induced proton evolution has emerged as a novel strategy to realize electron doping and manipulate the electronic and magnetic ground states in complex oxides. While the study of a wide range of systems (e.g., SrCoO 2.5 , VO 2 , WO 3 , etc.) has demonstrated important opportunities to incorporate protons through ILG, protonation remains a big challenge for many others. Furthermore, the mechanism of proton intercalation from the ionic liquid/solid interface to whole film has not yet been revealed. Here, with a model system of inverse spinel NiCo 2 O 4 , an increase in system temperature during ILG forms a single but effective method to efficiently achieve protonation. Moreover, the ILG induces a novel phase transformation in NiCo 2 O 4 from ferrimagnetic metallic into antiferromagnetic insulating with protonation at elevated temperatures. Finally, this study shows that environmental temperature is an efficient tuning knob to manipulate ILG-induced ionic evolution.

36 MATERIALS SCIENCE↗

Antiferromagnetic spin Seebeck effect.

We report on the observation of the spin Seebeck effect in antiferromagnetic MnF2. A device scale on-chip heater is deposited on a bilayer of MnF2 (110) (30nm)/Pt (4 nm) grown by molecular beam epitaxy on a MgF2(110) substrate. Using Pt as a spin detector layer, it is possible to measure the thermally generated spin current from MnF2 through the inverse spin Hall effect. The low temperature (2–80 K) and high magnetic field (up to 140 kOe) regime is explored. A clear spin-flop transition corresponding to the sudden rotation of antiferromagnetic spins out of the easy axis is observed in the spin Seebeck signal when large magnetic fields (>9T) are applied parallel to the easy axis of the MnF2 thin film. When the magnetic field is applied perpendicular to the easy axis, the spin-flop transition is absent, as expected.

Wu, Stephen M.↗

Influence of Thickness on Structural and Magnetic Properties of Co-rich Bi{sub 10}Co{sub 16}O{sub 38} Sillenite Thin Films

The effect of thickness on structural and magnetic properties of Co-rich Bi{sub 10}Co{sub 16}O{sub 38} (BCO) sillenite thin films is investigated systematically. BCO thin films are deposited using a simultaneous evaporation of Bi{sub 2}O{sub 3}, Co targets with RF-DC magnetron sputtering along with post-annealing procedure. The magnetic studies reveal an ordered magnetic nature below film thicknesses of 100 nm. Further, the temperature-dependent and field-dependent magnetic data is evaluated to comprehend the microstructure impact on to the magnetic nature of Co-rich sillenite thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured Magnetic Materials (Final Technical Progress Report)

This report describes progress made during the final phase of our DOE-funded program on Nanostructured Magnetic Materials. This period was quite productive, resulting in the submission of three papers and presentation of three talks at international conferences and three seminars at research institutions. Our DOE-funded research efforts were directed toward studies of magnetism at surfaces and interfaces in high-quality, well-characterized materials prepared by Molecular Beam Epitaxy (MBE) and sputtering. We have an exceptionally well-equipped laboratory for these studies, with: Thin film preparation equipment; Characterization equipment; Equipment to study magnetic properties of surfaces and ultra-thin magnetic films and interfaces in multi-layers and superlattices.

36 MATERIALS SCIENCE↗

Large Area Transfer of Bismuth‐Based Layered Oxide Thin Films Using a Flexible Polymer Transfer Method

Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO 3 ) and lanthanum aluminate (LaAlO 3 ) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer. In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr 3 Al 2 O 6 is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO 3 ) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.

36 MATERIALS SCIENCE↗

Cation- and lattice-site-selective magnetic depth profiles of ultrathin Fe 3 O 4 (001) films

A detailed understanding of ultrathin film surface properties is crucial for the proper interpretation of spectroscopic, catalytic, and spin-transport data. We present x-ray magnetic circular dichroism (XMCD) and x-ray resonant magnetic reflectivity (XRMR) measurements on ultrathin Fe 3 O 4 films to obtain magnetic depth profiles for the three resonant energies corresponding to the different cation species F e o c t 2 + , F e t e t 3 + , and F e o c t 3 + located on octahedral and tetrahedral sites of the inverse spinel structure of Fe 3 O 4 . By analyzing the XMCD spectrum of Fe 3 O 4 using multiplet calculations, the resonance energy of each cation species can be isolated. Performing XRMR on these three resonant energies yields magnetic depth profiles that each correspond to one specific cation species. The depth profiles of both kinds of Fe 3+ cations reveal a (3.9 ± 1.0) -Å -thick surface layer of enhanced magnetization, which is likely due to an excess of these ions at the expense of the F e o c t 2 + species in the surface region. The magnetically enhanced F e t e t 3 + layer is additionally shifted about 2.9 ± 0.4 Å farther from the surface than the F e o c t 3 + layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dimpling in critical current density vs. magnetic field angle in YBa{sub 2}Cu{sub 3}O{sub 7} films irradiated with 3-MeV gold ions

Magnetic-field-angle θ dependence of critical current density J{sub c} was measured in YBa{sub 2}Cu{sub 3}O{sub 7} films irradiated with 3-MeV gold ions. Such films were recently found to show large pinning force arising from point-like irradiation defects. A dimpled line-shape of J{sub c}(θ) and its variation with magnetic field strength were revealed that could be well described by a simple model based on flux-lattice shear and Blatter scaling. Our results strongly suggest that vortex elasticity and electron-mass anisotropy coordinately produce the characteristic J{sub c} anisotropy, called “shoulders,” in cuprate and iron-pnictide films.

36 MATERIALS SCIENCE↗

Synchronous (Lock-in) Measurement Techniques for Magnetic Contrast Enhancement in STXM

We have explored the capabilities of synchronous ('lock-in') point detection techniques to enhance the x-ray magnetic circular dichroism (XMCD) contrast in scanning x-ray transmission microscopy (STXM) of magnetic thin-film microstructures. Local absorption contrast, measured synchronously with low-amplitude (<10 Oe) and low-frequency (<200 hz) longitudinal fields perturbing the near-remanent magnetization state, reveal a strong spatial dependence of the response, with a roll-off in frequency response above 200 Hz. In this context, synchronous measurement affords us a basis for imaging the relation between energy loss and the sweeping rate. We speculate that the lock-in approach will be uniquely suited for detailing stochastic and deterministic frequency-dependent events in the process of magnetization reversal.

36 MATERIALS SCIENCE↗