Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION MICROSCOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Design and Beam Test Results for the sPHENIX Electromagnetic and Hadronic Calorimeter Prototypes

The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is $2.8\%\oplus~15.5\%/\sqrt{E}$ and the energy resolution for hadrons in the combined EMCal plus HCal system is $13.5\%\oplus 64.9\%/\sqrt{E}$. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparison of irradiation tolerance of two MAX phases-Ti 4 AlN 3 and Ti 2 AlN

The microstructures of two MAX phases, Ti 2 AlN and Ti 4 AlN 3 , irradiated at room temperature with 70 keV He ions over a wide fluence range have been studied to reveal the dependence of MAX phase irradiation tolerance on structure. Grazing incident x-ray diffraction (GIXRD) reveals that a new set of diffraction peaks appears after ion irradiation for both MAX phases and the positions of diffraction peaks gradually shift towards lower 2θ values with increasing fluence. Transmission electron microscope characterizations show both MAX phases experience a similar structure transformation at low fluences, forming an intermediate structure. The d-spacings derived from electron diffraction analysis of intermediate structures are basically consistent with that of new peaks in GIXRD. At high fluences a nano-twinned microstructure is found in Ti 2 AlN, but no such microstructure is observed in Ti 4 AlN 3 . Based on the simulation results of electron diffractions and the irradiation responses of other MAX phases, the structure characteristics and formation mechanisms of the intermediate structure are derived and the discrepancy in the phase stability of both MAX phases at high fluences is discussed.

36 MATERIALS SCIENCE↗

Quantification of defects engineered in single layer MoS 2

Atomic defects are controllably introduced in suspended single layer molybdenum disulfide (1L MoS 2 ) using helium ion beam. Vacancies exhibit one missing atom of molybdenum and a few atoms of sulfur. Quantification was done using a Scanning Transmission Electron Microscope (STEM) with an annular detector. Experimentally accessible inter-defect distance was employed to measure the degree of crystallinity in 1L MoS 2 . A correlation between the appearance of an acoustic phonon mode in the Raman spectra and the inter-defect distance was established, which introduces a new methodology for quantifying defects in two-dimensional materials such as MoS 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Patterned electrochemical deposition of copper using an electron beam

We describe a technique for patterning clusters of metal using electrochemical deposition. By operating an electrochemical cell in the transmission electron microscope, we deposit Cu on Au under potentiostatic conditions. For acidified copper sulphate electrolytes, nucleation occurs uniformly over the electrode. However, when chloride ions are added there is a range of applied potentials over which nucleation occurs only in areas irradiated by the electron beam. By scanning the beam we control nucleation to form patterns of deposited copper. We discuss the mechanism for this effect in terms of electron beam-induced reactions with copper chloride, and consider possible applications.

36 MATERIALS SCIENCE↗

Study of Helium Irradiation Effect on Al6061 Alloy Fabricated by Additive Friction Stir Deposition

Additive friction stir deposition (AFS-D) is considered a productive method of additive manufacturing (AM) due to its ability to produce dense mechanical parts at a faster deposition rate compared to other AM methods. Al6061 alloy finds extensive application in aerospace and nuclear engineering; nevertheless, exposure to radiation or high-energy particles over time tends to deteriorate their mechanical performance. However, the effect of radiation on the components manufactured using the AFS-D method is still unexamined. In this work, samples from the as-fabricated Al6061 alloy, by AFS-D, and the Al6061 feedstock rod were irradiated with He+ ions to 10 dpa at ambient temperature. The microstructural and mechanical changes induced by irradiation of He+ were examined using a scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and nanoindentation. This study demonstrates that, at 10 dpa of irradiation damage, the feedstock Al6061 produced a bigger size of He bubbles than the AFS-D Al6061. Nanoindentation analysis revealed that both the feedstock Al6061 and AFS-D Al6061 samples have experienced radiation-induced hardening. These studies provide a valuable understanding of the microstructural and mechanical performance of AFS-D materials in radiation environments, offering essential data for the selection of materials and processing methods for potential application in aerospace and nuclear engineering.

36 MATERIALS SCIENCE↗

Mars Sample Return: The Next Step Required to Revolutionize Knowledge of Martian Geological and Climatological History

The capability of scientific instrumentation flown on planetary orbiters and landers has made great advances since the signature Viking mission of the seventies. At some point, however, the science return from orbital remote sensing, and even in situ measurements, becomes incremental, rather than revolutionary. This is primarily caused by the low spatial resolution of such measurements, even for landed instrumentation, the incomplete mineralogical record derived from such measurements, the inability to do the detailed textural, mineralogical and compositional characterization needed to demonstrate equilibrium or reaction paths, and the lack of chronological characterization. For the foreseeable future, flight instruments will suffer from this limitation. In order to make the next revolutionary breakthrough in understanding the early geological and climatological history of Mars, samples must be available for interrogation using the full panoply of laboratory-housed analytical instrumentation. Laboratory studies of samples allow for determination of parageneses of rocks through microscopic identification of mineral assemblages, evaluation of equilibrium through electron microbeam analyses of mineral compositions and structures, determination of formation temperatures through secondary ion or thermal ionization mass spectrometry (SIMS or TIMS) analyses of stable isotope compositions. Such details are poorly constrained by orbital data (e.g. phyllosilicate formation at Mawrth Vallis), and incompletely described by in situ measurements (e.g. genesis of Burns formation sediments at Meridiani Planum). Laboratory studies can determine formation, metamorphism and/or alteration ages of samples through SIMS or TIMS of radiogenic isotope systems; a capability well-beyond flight instrumentation. Ideally, sample return should be from a location first scouted by landers such that fairly mature hypotheses have been formulated that can be tested. However, samples from clastic sediments derived from an extensive region of Mars can provide important, detailed understanding of early martian geological and climatological history. Interrogating clastic "sediments" from the Earth, Moon and asteroids has allowed discovery of new crustal units, identification of now-vanished crust, and determination of the geological history of extensive, remote regions. Returned sample of martian fluvial and/or aeolian sediments, for example from Gale crater, could be "read like a book" in terrestrial laboratories to provide truly revolutionary new insights into early martian geological and climatological evolution.

Mittlefehldt, D. W.↗

Nb{sub 2}O{sub 5} hollow nanospheres as anode material for enhanced performance in lithium ion batteries

Graphical abstract: Nb{sub 2}O{sub 5} hollow nanosphere constructed electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles and maintains structural integrity and excellent cycling stability. Highlights: ► Nb{sub 2}O{sub 5} hollow nanospheres synthesis was synthesized by soft-template. ► Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode material in Li-ion battery. ► Nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles. ► The electrode maintains the structural integrity and excellent cycling stability. ► Nanosized shell domain facilitates fast lithium intercalation/deintercalation. -- Abstract: Nb{sub 2}O{sub 5} hollow nanospheres of average diameter ca. ∼29 nm and hollow cavity size ca. 17 nm were synthesized using polymeric micelles with core–shell–corona architecture under mild conditions. The hollow particles were thoroughly characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), infrared spectroscopy (FTIR), thermal (TG/DTA) and nitrogen adsorption analyses. Thus obtained Nb{sub 2}O{sub 5} hollow nanospheres were investigated as anode materials for lithium ion rechargeable batteries for the first time. The nanostructured electrode delivers high capacity of 172 mAh g{sup −1} after 250 cycles of charge/discharge at a rate of 0.5 C. More importantly, the hollow particles based electrodes maintains the structural integrity and excellent cycling stability even after exposing to high current density 6.25 A g{sup −1}. The enhanced electrochemical behavior is ascribed to hollow cavity coupled with nanosized Nb{sub 2}O{sub 5} shell domain that facilitates fast lithium intercalation/deintercalation kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li-Ion Diffusion Correlations in LiAlGeO 4 : Quasielastic Neutron Scattering and Ab Initio Simulation

Here, we investigated the impact of Li stoichiometry and host flexibility on Li + diffusion processes in LiAlGeO 4 at the microscopic level using quasielastic neutron scattering (QENS) and ab initio molecular dynamics (AIMD) simulations. Using sufficiently long AIMD trajectories, we could simulate the observed QENS signal and identify the localized dynamics of Li in crystalline LiAlGeO 4 . Such information is vital to identify the bottleneck of diffusion processes and design materials for battery application. Our AIMD simulations in LiAlGeO 4 reveal that the Li + conductivity can be significantly improved by manipulating the Li stoichiometry and/or host flexibility via amorphization. We determined that excess Li stoichiometry enhances the Coulomb repulsion of neighboring Li sites and softens the host structure to enable faster Li + diffusion along the hexagonal c-axis. In the amorphous structure, random orientations of AlO 4 and GeO 4 polyhedral units create a wide distribution of intersite distances and significantly soften the host structure, greatly enhancing the Li + diffusion. The simulations are used to understand the nature of diffusion, especially the role of the host structure, the possible hopping pathways, and the diffusion behavior in various structures of LiAlGeO 4 .

localized dynamics↗

Mass parameters for relative and neck collective motions in heavy ion fusion reactions

Mass parameters for the relative and neck motions in fusion reactions of symmetric systems {sup 90}Zr+{sup 90}Zr, {sup 110}Pd+{sup 110}Pd, and {sup 138}Ba+{sup 138}Ba are studied by means of a microscopic transport model. The shape of the nuclear system is determined by an equidensity surface obtained from the density distribution of the system. The relative and neck motions are then studied and the mass parameters for these two motions are deduced. The mass parameter for the relative motion is around the reduced mass when the reaction partners are at the separated configuration and increases with a decrease of the distance between two reaction partners after the touching configuration. The mass parameter for the neck motion first decreases slightly up to the touching configuration and then increases with the neck width, and its magnitude is from less than a tenth to several times more than the total mass of the system. The mass parameters obtained from the microscopic transport model are larger than the ones obtained from the hydrodynamic model and smaller than those obtained from the linear response function theory. The mass parameters for both motions depend on the reaction systems, but the one for the relative motion depends on the incompressibility of the EoS more obviously than that for neck motion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Physical and Engineering Limits of Coupled In situ TEM Experiments

Almost all future energy systems (advanced nuclear reactors, fusion energy system, concentrating solar-thermal power (CSP), and wind technologies) are limited by degradation of key material systems exposed to multiple environmental stressors. The degradation during exposure to high temperatures, radiation, mechanical loading, and chemical attack is often dictated by mechanisms active at the microstructural level. The nature of these mechanisms and the associated variations between sequential and concurrent interplay can be explored if the transmission electron microscope (TEM) is utilized as a toolbox for exploration [1]. One such tool developed at Sandia National Laboratories to couple several of these environments is the In situ Ion Irradiation TEM (I3TEM) [2]. Several studies over the last decade utilizing this tool have shown that the scientific intuition developed over decades of sequential experiments is not always a good indicator of concurrent mechanisms or failure routes. This presentation will highlight the recent and planned additions into the I3TEM facility of a Waviks gas injection system and Raman system, respectively, as can be seen in Fig. 1, permitting environmental degradation from gas species leaked into the pole piece region during quantitative mechanical loading (indentation, monotonic loading, high temperature creep, irradiation induced creep, and high-cycle fatigue); multi-beam ion irradiation (energies ranging from 1 keV to 48 MeV and species from H to Au); laser exposure (20 W and 1064 nm), or various combinations thereof that are already possible [3]. This addition permits the facility to explore both sequential or concurrently the four axes of stressors: thermal, mechanical, radiation, and chemical. This information can be directly coupled to modeling, expediting the refinement and validation of both atomistic and mesoscale models.

degradation↗

Focused ion beam induced structural modifications in thin magnetic films

Focused ion beam techniques are one way to modify locally the properties of magnetic thin films. We report on structural investigations of 50 nm thick non-ordered nano-crystalline Permalloy (Ni{sub 81}Fe{sub 19}) films modified by 30 keV Ga{sup +} focused ion beam (FIB) irradiation. From the x-ray diffraction (XRD) measurements a considerable crystallite growth and a material texturing towards (111)-direction with a linearly increasing lattice constant was observed. In addition, cross-sectional transmission electron microscope (XTEM) images show that crystallites are growing through the entire film at high irradiation fluences. Extended x-ray absorption fine structure (EXAFS) analysis shows a perfect near-order coordination corresponding to a face-centered (fcc) unit cell for both Fe, Ni and Ga atom surrounding. The structural changes are accompanied by a decrease of saturation polarization with increasing ion fluence. Such a behavior is attributed to the incorporation of non-magnetic Ga atoms in the Permalloy film.

36 MATERIALS SCIENCE↗

Effect of Water Concentration in LiPF 6 -Based Electrolytes on the Formation, Evolution, and Properties of the Solid Electrolyte Interphase on Si Anodes

A trace amount of water in an electrolyte is one of the factors detrimental to the electrochemical performance of silicon (Si)-based lithium-ion batteries that adversely affect the formation and evolution of the solid electrolyte interphase (SEI) on Si-based anodes and change its properties. Thus far, a lack of fundamental and mechanistic understanding of SEI formation, evolution, and properties in the presence of water has inhibited efforts to stabilize the SEI for improved electrochemical performance. As such, we investigated the SEI formed in a Gen2 electrolyte (1.2 M LiPF6 in ethylene carbonate/ethyl methyl carbonate, 3:7 wt %, water content: <10 ppm) with and without additional water (50 ppm) at varying potentials (1.0, 0.5, 0.2, and 0.01 V vs Li/Li + ). The impact of additional water on the morphological, (electro)chemical, and structural properties of SEI was studied using microscopic (atomic force microscopy and scanning spreading resistance microscopy) and spectroscopic (X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and time-of-flight secondary ion mass spectrometry) techniques. The SEI exhibits both potential- and water concentration-dependent trends in its morphology and chemical composition. The presence of additional water in the electrolyte causes parasitic reactions, which onset at ~1.0 V, resulting in a reduction of electrolyte components and result in the formation of an insulating, fluorophosphate-rich SEI. In addition, hydrolysis of LiPF 6 creates hydrofluoric acid, which reacts with the surface oxide layer on the Si electrode, leading to a pitted and inhomogeneous SEI structure.

36 MATERIALS SCIENCE↗

Characterization and antibacterial properties of stable silver substituted hydroxyapatite nanoparticles synthesized through surfactant assisted microwave process

Highlights: • Stable nano sized silver substitute hydroxyapatite is prepared under surfactant assisted microwave process at 600 W power for 7 min. • The nanoparticles are in the size range of 58–72 nm and exert uniform elongated spheroid morphology. • Increase in silver concentration resulted in better dielectric properties. • Good antibacterial activity and silver release. - Abstract: The present study reports a relatively simple method for the synthesis of stable silver substituted hydroxyapatite nanoparticles with controlled morphology and particle size. In order to achieve this, CTAB is included as a surfactant in the microwave refluxing process (600 W for 7 min). The nanoparticles produced with different silver ion concentrations (0.05, 0.1 and 0.2 wt%) were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscope (FESEM), energy dispersive X-ray (EDX) and Brunauer–Emmett–Teller (BET) analysis. XRD and FTIR analyses reveal that the Ag-HA nanoparticles were phase pure at 1000 °C. FESEM images showed that the produced nanoparticles are in the size range of 58–72 nm and exert uniform elongated spheroid morphology. The dielectric properties suggest that the increase in dielectric constant (ε′) and dissipation factor (D) values with increasing Ag concentrations. Antibacterial performance of the Ag-HA samples elucidated using disk diffusion technique (DDT) and minimum inhibitory concentration (MIC) demonstrates anti-bacterial activity against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli. This effect was dose dependent and was more pronounced against Gram-negative bacteria than Gram-positive organisms.

36 MATERIALS SCIENCE↗

Structure–Activity Relationships in Ether-Functionalized Solid-State Metal–Organic Framework Electrolytes

The structure–property relationships of metal–organic framework (MOF)-based solid-state electrolytes are not well understood. Herein, a systematic investigation of 12 Zr(IV)-based UiO-66 MOFs with varying ether-chain functional groups was carried out to elucidate the critical microscopic interactions that facilitate improved solid-state electrolyte performance. Enhanced sampling molecular dynamics (MD) simulations were employed and revealed a three-tier ion hopping mechanism: linker–linker hopping, linker-counterion hopping, and counterion-counterion hopping. Detailed structural analysis of the MD trajectories revealed that the chemistry and morphology of the linker groups affect the relative stability and population distribution of the electrolyte components, such that crown-ether-based linker groups enhance the probability of extended, low-barrier ion percolation pathways. As a result, we were able to tune the ionic conductivities by rationally manipulating the counterion distributions, linker binding strengths, and the configurational entropy (multivariability of the linkers). The resulting performance of these MOF-based solid-state electrolytes was significantly enhanced, with a methoxy-functionalized framework (UiO-66-L1 100 ) achieving high ionic conductivities of 2.32 × 10 –4 S/cm and 2.07 × 10 –3 S/cm at 30 °C and 90 °C, respectively, an order of magnitude greater than other all-solid-state MOF electrolyte systems. The electrolyte stability was evaluated with LiIn|LPSCl|MOF:LiTFSI|LPSCl|LiIn symmetric cells, showing excellent Li plating/stripping processes for over 2 months.

36 MATERIALS SCIENCE↗

Roughness of Ti Substrates for Control of the Preferred Orientation of TiO 2 Nanotube Arrays as a New Orientation Factor

We report the surface roughness of a Ti substrate as a critical factor for controlling the degree of the preferred orientation of anatase TiO2 nanotube arrays (NTAs) which are synthesized by anodization and a subsequent annealing process. The degree of the preferred orientation to the (004) plane of the anatase crystal structure has a strong dependency on the root-mean-square roughness (Sq) of the initial Ti substrate when the roughness-controlled substrates are anodized in an ethylene glycol-based electrolyte containing ~2 wt % of water. Highly preferred oriented NTAs were obtained from low-Sq (<10 nm) substrates, which were accompanied by uniform pore distribution and low concentration of hydroxyl ions in as-anodized amorphous NTAs. The mechanism of the preferred oriented crystallization of nanometer-scaled tube walls is explained considering the microscopic geometrical uniformity of the oxide barrier and nanopores at the early stage of anodization, which affected the local electric field and thus the insertion of the hydroxyl group into the amorphous TiO2 tube walls.

14 SOLAR ENERGY↗

Mapping the Temperature-dependent and network site-specific onset of spectral diffusion at the surface of a water cluster cage

We explore the kinetic processes that sustain equilibrium in a microscopic, finite system. This is accomplished by monitoring the spontaneous, time-dependent frequency evolution (the frequency autocorrelation) of a single OH oscillator, embedded in a water cluster held in a temperature-controlled ion trap. The measurements are carried out by applying two-color, IR-IR photodissociation mass spectrometry to the D3O+?(HDO)(D2O)19 isotopologue of the “magic number” protonated water cluster, H+?(H2O)21. The OH group can occupy any one of the five spectroscopically distinct sites in the distorted pentagonal dodecahedron cage structure. The OH frequency is observed to evolve over tens of milliseconds in the temperature range (90-120 K). Starting at 100 K, large “jumps” are observed between two OH frequencies separated by ~300 cm-1 indicating migration of the OH group from the bound OH site at 3350 cm-1 to the free position at 3686 cm-1. Increasing the temperature to 110 K leads to partial interconversion among many sites. All sites are observed to interconvert at 120 K such that the distribution of the unique OH group among them adopts the form one would expect for a canonical ensemble. The spectral dynamics displayed by the clusters thus offer an unprecedented view into the molecular-level processes that drive spectral diffusion in an extended network of water molecules.

Yang, Nan↗

Impact of the Field of a Magnetic Force Microscope Probe on the Skyrmion State in a Modified Co/Pt Film with Perpendicular Anisotropy

We present the results of experiments on the local magnetization reversal of artificial magnetic skyrmions in a Co/Pt multilayer film with a perpendicular magnetization by a magnetic force microscope (MFM) probe. The sample was a Co/Pt film containing an array of cylindrical regions with reduced anisotropy, modified by a focused He{sup +} ion beam. The magnetic state of the sample was monitored by magnetic force microscopy. The magnetization reversal was performed by the MFM probe field during passes over the sample at low altitudes. The effects of the interaction of the field of the MFM probe with the skyrmion state of magnetization in these structures are investigated by micromagnetic simulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗