Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Horizontal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Large horizontal axis wind turbine development

An overview of the NASA activities concerning ongoing wind systems oriented toward utility application is presented. First-generation-technology large wind turbines were designed and are in operation at selected utility sites. In order to make a significant energy impact, costs of 2 to 3 cents per kilowatt hour must be achieved. The federal program continues to fund the development by industry of wind turbines which can meet the cost goals of 2 to 3 cents per kilowatt hour. Lower costs are achieved through the incorporation of new technology and innovative system design to reduce weight and increase energy capture.

Robbins, W. H.↗

The Si ribbon crystal for the solar battery using the horizontal pull method

A method utilizing a device to spray noble gases to cool the site of silicon crystal growth is described. The salient points are: (1) soft and uniform cooling was possible, (2) the length of the boundary surface of growth along the growth direction was made long over a wide width compared to the thickness, and (3) this made it possible to effectively remove the heat produced from solification. By using forced gas spraying on the solution surface in contact with the points of crystal growth, growth at the points of growth is enhanced and the rate of growth is speeded up.

Norifuji, H.↗

Loaded horizontal antenna over an imperfect ground

The effect of loading for antennas over an imperfect ground is analyzed. The Fresnel reflection coefficient technique is used to derive an E-integral equation for the antenna current. An optimization method is employed to determine the critical loading parameter which enforces a traveling wave current on the antenna. Results are given for the critical loading parameters, antenna currents, input impedances, and radiation patterns for various antenna dimensions and ground parameters. Calculations of the time-domain behavior of the current are presented to show the effect of loading on antenna transient response.

Rahmat-Samii, Y.↗

Horizontal eddy diffusivities in the Northern Hemispheric stratosphere and lower mesosphere

Meteorological rocket soundings, launched between 1969-74 at six locations representative of low, middle, and high altitudes, are employed with the use of the statistical theory of diffusion, to determine the zonal and meridional component of eddy diffusivity between 30 and 55 km as a function of season, latitude, and altitude. A comparison is also made between annually-averaged eddy diffusivities above and below 30 km. It is shown that the zonal component of eddy diffusivity is approximately three to five times as large as the meridional component, in most cases. Both components of eddy diffusivity vary greatly with season, latitude, and altitude. Highest eddy diffusivities, found in the vicinity of the winter westerly jet, are approximately one order of magnitude higher than those present during the summer. Tropical eddy diffusivities, however, remain relatively small throughout the year. Annually, a minimum is indicated near 25 km between maximums located at the stratopause and tropopause.

Kao, S. K.↗

Variation of horizontal winds with height /surface to 150 meters/

The data used in the reported analysis consist of 79 five-second intervals from the Automatic Data Acquisition System (ADAS) at the tower facility. Measurements were recorded on July 3, 1973 from 1931 through 2152 GMT during various wind conditions. Peak wind speed was determined for each 5-second interval and level and classified as low, moderate, high, or gale-force. Attention is given to peak wind speeds, wind speed differences determined from peak and associated speeds, and wind speed differences determined from the entire data record. Considering frequency and intensity of peak wind speeds, levels from 30 meters and up are significant ones. Considering frequency and magnitude of wind shears, these analyses indicate that the 60-30 layer is the significant one.

Alexander, M.↗

Determination of cooling air mass flow for a horizontally-opposed aircraft engine installation

The relationship between the amount of cooling air flow and the corresponding flow pressure difference across an aircraft engine was investigated in flight and on the ground. The flight test results were consistent with theory, but indicated a significant installation leakage problem. A ground test blower system was used to identify and reduce the leakage. The correlation between ground test cell determined engine orifice characteristics and flight measurements showed good agreement if the engine pressure difference was based on total pressure rather than static pressure.

Miley, S. J.↗

Study of cooling air inlet and exit geometries for horizontally opposed piston aircraft engines

A semispan wing and nacelle of a typical general aviation twin-engine aircraft was tested to evaluate the cooling capability and drag of several nacelle shapes; the nacelle shapes included cooling air inlet and exit variations. The tests were conducted in the Ames Research Center's 40- by 80-Foot Wind Tunnel. It was found that the cooling air inlet geometry of opposed piston engine installations has a major effect on inlet pressure recovery, but only a minor effect on drag. Exit location showed a large effect on drag, especially for those locations on the sides of the nacelle where the suction characteristics were based on interaction with the wing surface pressures.

Katz, J.↗

A pilot training manual for the terminal configured vehicle electronic horizontal situation indicator

The initial phase of a training program for the Terminal Configured Vehicle Electronic Situation indicator (EHSI) is presented. The EHSI and its symbology is introduced and interpretation of the symbols is explained. Basic symbols shown on the display at all times are first presented. Additional optional symbols to be used as appropriate during different portions of a flight are then introduced and various display configurations interpreted. The upper half of each page is a reproduction of the EHSI display or other pertinent instructional material and the bottom half contains explanatory text, simplifying production of an audiovisual package for use with large training classes. Two quizzes on the course material are included.

Houck, J. A.↗

Minimum fuel horizontal flightpaths in the terminal area

The problem of minimum fuel airplane trajectories from arbitrary initial states to be fixed final state is considered. There are four state variables (two position coordinates, heading, and constrained velocity) and two constrained controls (thrust and bank angle). The fuel optimality of circular and straight line flightpaths is examined. Representative extremals (trajectories satisfying the necessary conditions of the minimum principle) of various types are computed and used to evaluate trajectories generated by an on line algorithm. Attention is paid to the existence of Darboux points (beyond which an extremal ceases to be globally optimal). One fuel flow rate model includes a term quadratic in thrust; hence, the optimal thrust is continuous and nonsingular. The other fuel flow rate model is linear in thrust, and consequently the optimal thrust is discontinuous and singular.

Kreindler, E.↗

Influence of combined visual and vestibular cues on human perception and control of horizontal rotation

Measurements are made of manual control performance in the closed-loop task of nulling perceived self-rotation velocity about an earth-vertical axis. Self-velocity estimation is modeled as a function of the simultaneous presentation of vestibular and peripheral visual field motion cues. Based on measured low-frequency operator behavior in three visual field environments, a parallel channel linear model is proposed which has separate visual and vestibular pathways summing in a complementary manner. A dual-input describing function analysis supports the complementary model; vestibular cues dominate sensation at higher frequencies. The describing function model is extended by the proposal of a nonlinear cue conflict model, in which cue weighting depends on the level of agreement between visual and vestibular cues.

Zacharias, G. L.↗

Algorithm for fuel conservative horizontal capture trajectories

A real time algorithm for computing constant altitude fuel-conservative approach trajectories for aircraft is described. The characteristics of the trajectory computed were chosen to approximate the extremal trajectories obtained from the optimal control solution to the problem and showed a fuel difference of only 0.5 to 2 percent for the real time algorithm in favor of the extremals. The trajectories may start at any initial position, heading, and speed and end at any other final position, heading, and speed. They consist of straight lines and a series of circular arcs of varying radius to approximate constant bank-angle decelerating turns. Throttle control is maximum thrust, nominal thrust, or zero thrust. Bank-angle control is either zero or aproximately 30 deg.

Neuman, F.↗

The horizontal and vertical semi-diameters of the Sun observed at the Cape of Good Hope (1834 - 1887) and Paris (1837 - 1906): A report on work in progress

Cape and Paris meridian observations of the solar limbs which permit an estimate to be made of the solar semi-diameter were surveyed, sampled, and compared with Greenwich and U.S. Naval Observatory observations. Significant systematic errors were found in the Paris work and have been correlated with changes of instruments and observers. Results from the Cape series indicate that work should continue on the compilation of data from Cape observations of the Sun.

Smith, C.↗

Horizontal wind estimates deterministically derived from the STS-1 entry flight date--a comparison with available meteorology data

Two wind profiles were determined from STS-1 entry flight data based on preliminary best estimate trajectory (BET). The deterministic process used in deriving the atmospheric winds requires inertial estimates of the spacecraft angle-of-attack (alpha) and side-slip angle (beta) from the BET in conjunction with some air data system measurements of the actual angles. The current orbiter air data system (OADS) provides the necessary alpha information. Two beta profiles were adopted. The first profile assumed that the spacecraft would weathervane into any prevailing wind. The second assumed a conservative side-slip history computed from measured accelerations in the spacecraft body axes. It is shown that there are no major differences between the deterministic winds computed using both methods. Further, comparisons of these winds with raw measurements from Tehachapi, California, and preliminary winds obtained from the LaRC LAIRS file and the JSC/TRW descent BET are presented.

Kelly, G. M.↗

Wind response characteristics of horizontal axis wind turbines

It was the objective of the work reported here, and in the companion paper 1 . A broader examination of wind turbine dynamic response to turbulence, and attempts to ascertain the features of turbulence that wind turbines are most sensitive to were made. A statistical description of the wind input including all three wind components and allowing linear wind gradients across the rotor disk, was used together with quasi-static aerodynamic theory and an elementary structural model involving only a few degrees of freedom. The idea was to keep the turbine model simple and show the benefits of this type of statistical wind representation before attempting to use a more complex turbine model. As far as possible, the analysis was kept in the simplest form, while still preserving key physical responses.

Thresher, R. W.↗

Wind turbulence inputs for horizontal axis wind turbines

Wind turbine response characteristics in the presence of atmospheric turbulence was predicted using two major modeling steps. First, the important atmospheric sources for the force excitations felt by the wind turbine system were identified and characterized. Second, a dynamic model was developed which describes how these excitations are transmitted through the structure and power train. The first modeling step, that of quantifying the important excitations due to the atmospheric turbulence was established. The dynamic modeling of the second step was undertaken separately.

Holley, W. E.↗

Experience on the use of MOSTAB-HFW computer code for horizontal-axis wind turbines

Three topics are covered dealing with the frequencies of a rotating beam, the use of the fundamental mode of a uniform cantilever beam, and the analysis of resonance dwell. Immensely high peak loads were generated by the code for resonance dwell indicating further need for including structural damping and for transient analysis capability. The effect of structural damping, newly incorporated in the code, is described.

Yu, Y. Y.↗

A review of resonance response in large horizontal-axis wind turbines

Field operation of the Mod-0 and Mod-1 wind turbines is described. Operational experience shows that 1 per rev excitation exists in the drive train, high aerodynamic damping prevents resonance response of the blade flatwise modes, and teetering the hub substantially reduces the chordwise blade response to odd harmonic excitation. These results can be used by designer as a guide to system frequency placement. In addition it is found that present analytical techniques can accurately predict wind turbine natural frequencies.

Sullivan, T. L.↗