Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Spacecraft microbial burden reduction due to atmospheric entry heating: Jupiter

Planetary quarantine analyses performed for recent unmanned Mars and Venus missions assumed that the probability of contamination by a spacecraft given accidental impact was equivalent to one. However, in the case of the gaseous outer planets, the heat generated during the inadvertent entry of a spacecraft into the planetary atmosphere might be sufficient to cause significant microbial burden reduction. This could affect navigation strategy by reducing the necessity for biasing the aim point away from the planets. An effort has been underway to develop the tools necessary to predict temperature histories for a typical spacecraft during inadvertent entry. In order that the results have general applicability, parametric analyses were performed. The thermal response of the spacecraft components and debris resulting from disintegration was determined. The temperature histories of small particles and composite materials, such as thermal blankets and an antenna, were given special attention. Guidelines are given to indicate the types of components and debris most likely to contain viable organisms, which could contaminate the lower layers of the Jovian atmosphere (approximately one atmosphere of pressure).

Gonzalez, C. C.↗

Shuttle cryogenic supply system optimization study. Volume 3: Technical report, section 10, 11 and 12

The evaluation of candidate cryogenic fuel systems for space shuttle vehicles is discussed. A set of guidelines was used to establish a matrix of possible combinations for the integration of potential cryogenic systems. The various concepts and combinations which resulted from the integration efforts are described. The parameters which were considered in developing the matrix are: (1) storage of cryogenic materials, (2) fuel lines, (3) tank pressure control, (4) thermal control, (5) fluid control, and (6) fluid conditioning. Block diagrams and drawings of the candidate systems are provided. Performance predictions for the systems are outlined in tables of data.

Source record↗

Astronomy sortie missions definition study. Volume 4: Program development requirements

Program development requirements for the selected Astronomy Sortie Missions concept were generated and are presented in four parts as follows: (1)the gross planning requirements that must be considered in subsequent phases of the project; (2)the schedules and logic networks for the design, development, and operation of the overall project; (3)the supporting research and technology required to support the project; and (4)the work breakdown data, from which cost data will be generated. Data reported in each part includes the appropriate rationale with explanations of the guidelines and assumptions that were used in the analyses and estimates.

Source record↗

Study of space shuttle EVA/IVA support requirements. Volume 1: Technical summary report

Results are summarized which were obtained for equipment requirements for the space shuttle EVA/IVA pressure suit, life support system, mobility aids, vehicle support provisions, and energy 4 support. An initial study of tasks, guidelines, and constraints and a special task on the impact of a 10 psia orbiter cabin atmosphere are included. Supporting studies not related exclusively to any one group of equipment requirements are also summarized. Representative EVA/IVA task scenarios were defined based on an evaluation of missions and payloads. Analysis of the scenarios resulted in a total of 788 EVA/IVA's in the 1979-1990 time frame, for an average of 1.3 per shuttle flight. Duration was estimated to be under 4 hours on 98% of the EVA/IVA's, and distance from the airlock was determined to be 70 feet or less 96% of the time. Payload water vapor sensitivity was estimated to be significant on 9%-17% of the flights. Further analysis of the scenarios was carried out to determine specific equipment characteristics, such as suit cycle and mobility requirements.

Copeland, R. J.↗

Safety in earth orbit study

Safety aspects are studied of the space shuttle orbiter, the shuttle payloads, and space stations in earth orbital operations. The tasks generated safety requirements, guidelines, recommendations, and conceptual safety devices. The tasks studied were: hazardous payloads, docking, onboard survivability tumbling spacecraft, and escape and rescue operations.

Source record↗

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

Source record↗

The Future of Regulation in the Airline Industry

The Federal regulation of airlines is analyzed to predict the amount of regulation to be expected in the future. It is stated that the regulatory powers will increase because of the advantages that such regulation provides to the airlines. Six propositions are submitted as guidelines for future airlines regulation. The loss of revenue experienced by the airlines is examined and methods for improving the economic situation are defined.

Cherington, P. W.↗

International Air Transport Policy

The actions of the Civil Aviation Board in providing assistance and advice to the State Department regarding international air transport policy are discussed. The policies and guidelines of the Civil Aviation Board are defined. The relationship with the policies of the Executive Branch of the Government and the interpretations of the Department of Transportation are reported.

Butler, C.↗

International Air Transport and Federal Policy

The Federal policy which establishes guidelines for future U.S. participation in the international air transportation industry is discussed. The policy issues discussed include the following: (1) aircraft hijacking, both foreign and domestic, (2) relationship of scheduled services and charter services, (3) capacity problems, and (4) rate regulation.

Binder, R. H.↗

Thermodynamic considerations for the design of a sonic-boom reducing powerplant.

Third-order analytical expressions are obtained for the lift and wave-drag coefficients of a two-dimensional wing. The expressions are used to demonstrate the possibility of boomless lifting configuration designs when the cross-section area of the stream tube is reduced. The reduction is obtained by processing the captured airstream in such a manner that the stream tube area is smaller at the exit than at the entrance. Calculations by these expressions are shown to be in good agreement with exact results obtained from compressive flow tables. It is also shown that three-dimensional wing configurations of this design give the maximum thermodynamic effect when a propulsive power plant is employed for the reduction of the captured-stream area. Thermodynamic guidelines are given for power plant designs to be used for this purpose.

Galanis, N.↗

Design criteria and candidate electrical power systems for a reusable Space Shuttle booster.

This paper presents the results of a preliminary study to establish electrical power requirements, investigate candidate power sources, and select a representative power generation concept for the NASA Space Shuttle booster stage. Design guidelines and system performance requirements are established. Candidate power sources and combinations thereof are defined and weight estimates made. The selected power source concept utilizes secondary silver-zinc batteries, engine-driven alternators with constant speed drive, and an airbreathing gas turbine. The need for cost optimization, within safety, reliability, and performance constraints, is emphasized as being the most important criteria in design of the final system.

Merrifield, D. V.↗

Sealed silver oxide zinc cells for orbiting and planetary missions.

Several test programs were carried out to determine the performance and limitations of sealed, silver oxide zinc cells for (1) 24-hr synchronous orbits, (2) orbits that would require a maximum of six cycles per day, and (3) missions to other planets requiring maintenance of maximum capacity for probe operations during planet encounter. The results are summarized to provide power system designers with guidelines bearing on capacity maintenance during cycling, cycle life, charged stand effects, and internal pressure characteristics. The life of zinc silver oxide cells is shown to be limited to one to two years over the temperature range of 0 to 24 C.

Hennigan, T. J.↗

Spacecraft microbial burden reduction due to atmospheric entry heating - Jupiter.

An effort has been underway at Jet Propulsion Laboratory to develop the tools necessary to predict temperature histories for a typical spacecraft during inadvertent entry. In order that the results have general applicability, parametric analyses are performed. The thermal response of the spacecraft components and debris resulting from disintegration is determined. The temperature histories of small particles and composite materials, such as thermal blankets and an antenna, are given special attention. Guidelines are given to indicate the types of components and debris most likely to contain viable organisms, which could contaminate the lower layers of the Jovian atmosphere.

Gonzalez, C. C.↗

Pioneer Venus mission plan for atmospheric probes and an orbiter.

The mission concept is described for a spin-stabilized spacecraft being designed to deliver an array of aerodynamic probes over the surface of Venus, and, on a second flight mission, to inject the spacecraft into a Venusian orbit. Large and Small Probes and the instrumented 'Bus' structure will enter the Venusian atmosphere and directly measure its characteristics. An orbiting configuration of the same basic Bus spacecraft will serve as a platform from which to examine the planetary environment, the outer atmosphere and its interaction with the solar wind, as well as surface topography. The orbital mission will extend over a complete revolution of the planet around the sun and around its own axis. Requirements for cost effectiveness and firm adherence within early cost projections are emphatic program guidelines which affect every major element of the mission plan and conceptual design.

Dyer, J. W.↗

A digital communications system for manned spaceflight applications.

A highly efficient, all-digital communications signal design employing convolutional coding and PN spectrum spreading is described for two-way transmission of voice and data between a manned spacecraft and ground. Variable-slope delta modulation is selected for analog/digital conversion of the voice signal, and a convolutional decoder utilizing the Viterbi decoding algorithm is selected for use at each receiving terminal. A PN spread spectrum technique is implemented to protect against multipath effects and to reduce the energy density (per unit bandwidth) impinging on the earth's surface to a value within the guidelines adopted by international agreement. Performance predictions are presented for transmission via a TDRS (tracking and data relay satellite) system and for direct transmission between the spacecraft and earth. Hardware estimates are provided for a flight-qualified communications system employing the coded digital signal design.

Batson, B. H.↗

Gemini Program Mission Planning Report

This report defines the Gemini Program objectives and presents guidelines for the individual Gemini missions. It provides general space vehicle configuration data, and descriptions of planned missions. Contingency mission requirements and extravehicular operations to be performed during specific missions are described in the last two sections of the basic document. Data on spacecraft weights and Gemini Launch Vehicle performance capabilities are provided in Appendix A, while Appendix B provides descriptions of onboard experiments to be conducted during Gemini missions.

Source record↗

Space shuttle lightning protection criteria document

The lightning environment for design is defined and imposes the requirements that the design must satisfy to insure the protection of the space shuttle vehicle system from the direct and indirect effects of lightning. Specifications, criteria, and guidelines provide a practical and logical approach to the protection problems. Protection against the indirect effects of lightning is intimately involved with the electromagnetic compatibility and electromagnetic interference functions. While this document does not deal specifically with electromagnetic compatibility and electromagnetic interference, it does deal with the interactions between lightning protection measures and measures employed for electromagnetic compatibility and control of electromagnetic interference.

Source record↗

Crew interface specifications development functions, phase 3A

The findings and data products developed during the crew interface specification study for inflight maintenance and stowage functions are presented. Guidelines are provided for improving the present progress of defining, controlling, and managing the flight crew requirements. The following data products were developed: (1) description of inflight maintenance management process, (2) specifications for inflight maintenance management requirements, and (3) suggested inflight maintenance data processing reports for logistics management.

Carl, J. G.↗