Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight Software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Orbital flight simulation utility software unit specifications, revision 1

The HP PASCAL source code defines the specifications for a Utility Software Unit (USU) designed to support orbital flight simulators such as MANHANDLE and GREAS (General Research and Engineering Analysis Simulator). Besides providing basic input/output, mathematical, matrix, quaternion, and statistical routines for such simulators, one of the primary functions of the USU is to isolate all system-dependent codes in one well-defined compartment, thereby facilitating transportation of the simulations from one computer to another. Directives are given for the PASCAL compilers of the HP-9000 Series 200 Pascal 3.0 and the HP-9000 Series 500 HP-UX 5.0 operating systems that produce a single file of relocatable code from four separate files of source code. Three of the source code files are common to both operating systems. The fourth source code file (utilspif.I) contains all of the system-dependent PASCAL code for the USU. A fifth file of source code written in C is required to interface utilspif.I with the HP-UX I/O package. The Pascal 3.0 compiler directives and the driver source code for a unit rest program and counterparts for the HP-UX 5.0 operating system are given. The major portion of the unit test program source code is common to both operating systems. Unit test results from the Pascal 3.0 operating system and results from the HP-UX operating system are given.

Wilson, S. W.↗
NASA NTRS2016

Extended Bright Bodies - Flight and Ground Software Challenges on the Cassini Mission at Saturn

Extended bright bodies in the Saturn environment such as Saturn's rings, the planet itself, and Saturn's satellites near the Cassini spacecraft may interfere with the star tracker's ability to find stars. These interferences can create faulty spacecraft attitude knowledge, which would decrease the pointing accuracy or even trip a fault protection response on board the spacecraft. The effects of the extended bright body interference were observed in December of 2000 when Cassini flew by Jupiter. Based on this flight experience and expected star tracker behavior at Saturn, the Cassini AACS operations team defined flight rules to suspend the star tracker during predicted interference windows. The flight rules are also implemented in the existing ground software called Kinematic Predictor Tool to create star identification suspend commands to be uplinked to the spacecraft for future predicted interferences. This paper discusses the details of how extended bright bodies impact Cassini's acquisition of attitude knowledge, how the observed data helped the ground engineers in developing flight rules, and how automated methods are used in the flight and ground software to ensure the spacecraft is continuously operated within these flight rules. This paper also discusses how these established procedures will continue to be used to overcome new bright body challenges that Cassini will encounter during its dips inside the rings of Saturn for its final orbits of a remarkable 20-year mission at Saturn.

Sung, Tina S.↗
NASA NTRS2018

Hybridized Agile Software Development of Flight Control Team Tools for International Space Station's Payload Operations Integration Center

Ground systems operations at the National Aeronautics and Space Administration's (NASA) Payload Operations and Integration Function (POIF) is increasing, via the High Operations Tempo (HOT) initiative, its ability to support more science activities with a fourth crew member on the International Space Station (ISS). The Flight Control Team's need to support this increased crew presence mandated the need for a series of software tools to better handle the increasing pace of payload science operations. The overall need was clear from the outset, but the full scope and user experience for each tool, were not as well understood, so establishing a fixed set of initial requirements was not feasible. An Agile Software Development (ASD) paradigm takes advantage of uncertainty, and plans for it, so it was deemed the most appropriate approach to create room for exploring novel concepts, and to mount a rapid and flexible response to inevitiably changing requirements. It facilitated the need for unprecedented collaboration between the Product Team (i.e. users from the Flight Control Team) and the Development Team (i.e. POIC systems engineers, developers, testers). This is a process shift in the development, test, and release of software from one that is prescriptive to one that is adaptive, which is necessary for these tools to have longevity. The application of ASD to the product development lifecycle permitted the timely incorporation of customer feedback, and, allowed for continuous quality improvements. This resulted in a suite of tools that are efficient, user-friendly, and enable POIF ground systems to support the increasing pace of payload science operations. ASD is not as much a set of prescriptive processes as it is a shift in mindset; one that moves from planning against change, to planning for change, thereby iteratively growing software towards user-defined value.

Albers, Cerese M.↗
NASA NTRS2018

Hybridized Agile Software Development of Flight Control Team Tools for International Space Station's Payload Operations Integration Center

Ground systems operations at the National Aeronautics and Space Administration's (NASA) Payload Operations and Integration Center (POIC) at Marshall Space Flight Center (MSFC) recently increased via a High Operations Tempo (HOT) initiative, in order to support more science activities with a fourth crew member on the International Space Station (ISS). The Flight Control Team's (FCT) need to support this increasing pace of payload science operations was the impetus for creating a series of new tools. While their need was clear, the full scope and user experience for each tool was not as well-understood, thus establishing a fixed set of initial requirements was not feasible. A hybridized Agile Software Development (ASD) paradigm was created to take advantage of this uncertainty, plan for it, permit the exploration of novel concepts, and also facilitate a rapid and flexible response to inevitably changing requirements. The POIC's hybridized ASD approach places preeminent focus on providing customer value through the delivery of high quality, customer-focused solutions in short timeframes. This has been successfully achieved through creating unprecedented modes of cooperation and collaboration between operations and software development teams, frequent user evaluations of the software with well-defined feedback mechanisms, increased human factors involvement, and a dedication to successful outcomes by the whole of the POIC. Since space science operations and software development are not typically so closely linked, this paper discusses an approach that offers an optimal way to provide an increased return on investment and a faster time-to-completion than traditional software development paradigms, while aiming at delivering high quality products and customer-driven value.

Albers, Cerese M.↗
NASA NTRS1983

On requirements for software fault tolerance for flight controls

The need for the application of software fault tolerance techniques in digital flight control systems is argued to follow from the requirements derivable from the safety constraints of such systems, requirements which can be stated in terms of minimum acceptable system reliability levels and, moreover, stated quantitatively. It is argued further that, while fault tolerance appears to be a viable mechanism in general, individual fault tolerance schemes need to be analyzed to ensure that they are adequate to the task and being properly utilized, that such analysis is essentially an exercise in software 'reliability' estimation involving software characteristics not currently included in software 'reliability' modeling (most especially, the degree of correlation of malfunctions among redundant, dissimilar software modules), and that, consequently, further research and studies in the characterization of software behavior and malfunctions is required.

Migneault, G. E.↗
NASA NTRS2009

Software Considerations for Subscale Flight Testing of Experimental Control Laws

The NASA AirSTAR system has been designed to address the challenges associated with safe and efficient subscale flight testing of research control laws in adverse flight conditions. In this paper, software elements of this system are described, with an emphasis on components which allow for rapid prototyping and deployment of aircraft control laws. Through model-based design and automatic coding a common code-base is used for desktop analysis, piloted simulation and real-time flight control. The flight control system provides the ability to rapidly integrate and test multiple research control laws and to emulate component or sensor failures. Integrated integrity monitoring systems provide aircraft structural load protection, isolate the system from control algorithm failures, and monitor the health of telemetry streams. Finally, issues associated with software configuration management and code modularity are briefly discussed.

Murch, Austin M.↗
NASA NTRS1977

A description of the software analysis from flight and simulation data of the course cut limiter in the TCV b-737 area navigation computer

During automatic horizontal path captures, the (Terminal Configured Vehicle) B-737 airplane maintained smaller than designed path intercept angles and experienced a sawtooth bank angle oscillation during its turn towards the path. From flight data, it was determined that these anomalies were caused by the improper output of the course cut limiter in the horizontal path control law. The output from the course cut limiter did not obtain its full value and it was calculated stepwise discontinuously. The automatic horizontal path captures were then conducted on the TCV B-737 airplane real-time simulation. The path intercept angles were maintained properly and no bank angle oscillation was encountered. Data showed that the course cut limiter was calculated at its full value in a continuous manner. The intermediate calculations of the course cut limiter in the airplane's navigation computer were rewritten and rescaled in such a manner that truncation errors could be minimized. The horizontal path capture tests were then reflown. The airplane maintained the proper path intercept angle and no bank angle oscillations occurred on any of the tests.

Knox, C. E.↗
NASA NTRS1984

Design and operational features of the Ultraviolet Imaging Telescope flight and ground software

The NASA Office of Space Sciences and Applications is sponsoring a series of Space Shuttle missions named Astro-n which are dedicated to a variety of astronomical projects. These missions will be the first in which the Space Shuttle crew will be interactively operating an astronomical observatory which is fixed in the payload bay. The operation of an instrument in such an environment requires a considerable amount of software both on board and on the ground. The Spacelab Experiment Computer provides generalized interactive telemetry display and command processing services through the Experiment Computer Operating System. The experimenter must then design a software package for his Dedicated Experiment Processor which can provide complete control of his instrument as well as communicate with the Experiment Computer. This paper describes the design considerations and operational features of the Ultraviolet Imaging Telescope Dedicated Experiment Processor and Instrument Ground Support Equipment software.

Parise, R. A.↗
NASA NTRS2002

Software for Processing Flight and Simulated Data of the ATIC Experiment

ATIC (Advanced Thin Ionization Calorimeter) is a balloon borne experiment designed to measure the cosmic ray composition for elements from hydrogen to iron and their energy spectra from approx.50 GeV to near 100 TeV. It consists of a Si-matrix detector to determine the charge of a CR particle, a scintillator hodoscope for tracking, carbon interaction targets and a fully active BGO calorimeter. ATIC had its first flight from McMurdo, Antarctica from 28/12/2000 to 13/01/2001. The ATIC flight collected approximately 25 million events. A C++-class library for building different programs for processing flight and simulated data of the ATIC balloon experiment is described. This library is compatible with the ROOT-system and includes classes and methods for solving a number of problems as the following: Reading data files in different formats (raw-data format, ROOT-format, ASCII-format, different formats for simulated data); Transferring all these formats to the only inner format of the library; Reconstruction of trajectories of primary particles with BGO calorimeter only. The Monte-Carlo simulations with GEANT code were used to obtain the basic tables for computing error corridors and chi(sup 2)-values for the trajectories. Obtaining error corridors for searching for signal of primary particle in the Si-matrix; Searching for hit of primary particle in the Si-matrix with using of error corridor and other criteria (chi(sup 2)-values, agreement between signals in Si-matrix and in the upper layer of scintillator and others); Determination of charge of primary particle; Determination of energy deposit in BGO calorimeter.

Panov, A. D.↗
NASA NTRS2012

Time Manager Software for a Flight Processor

Data analysis is a process of inspecting, cleaning, transforming, and modeling data to highlight useful information and suggest conclusions. Accurate timestamps and a timeline of vehicle events are needed to analyze flight data. By moving the timekeeping to the flight processor, there is no longer a need for a redundant time source. If each flight processor is initially synchronized to GPS, they can freewheel and maintain a fairly accurate time throughout the flight with no additional GPS time messages received. How ever, additional GPS time messages will ensure an even greater accuracy. When a timestamp is required, a gettime function is called that immediately reads the time-base register.

Zoerne, Roger↗
NASA NTRSDate not supplied

NASA's Aviary Takes Flight: A Public Software for Aircraft Design

Aviary, developed by NASA, is an open-source software tool for modeling and optimizing traditional and next-generation aircraft designs. It modernizes legacy design tools and integrates disciplines together more tightly to evaluate new vehicles, like X-66, open-rotor electric aircraft, and blended wing body. Aviary has the potential to revolutionize aircraft analysis by leveraging the complex interactions between disciplines to make aircraft conceptual designs more efficient.

Carl Recine↗
NASA NTRS1979

SIFT - Multiprocessor architecture for Software Implemented Fault Tolerance flight control and avionics computers

A brief description of a SIFT (Software Implemented Fault Tolerance) Flight Control Computer with emphasis on implementation is presented. A multiprocessor system that relies on software-implemented fault detection and reconfiguration algorithms is described. A high level reliability and fault tolerance is achieved by the replication of computing tasks among processing units.

Forman, P.↗
NASA NTRS1985

Shuttle avionics software development trials: Tribulations and successes, the backup flight system

The development and verification of the Backup Flight System software (BFS) is discussed. The approach taken for the BFS was to develop a very simple and straightforward software program and then test it in every conceivable manner. The result was a program that contained approximately 12,000 full words including ground checkout and the built in test program for the computer. To perform verification, a series of tests was defined using the actual flight type hardware and simulated flight conditions. Then simulated flights were flown and detailed performance analysis was conducted. The intent of most BFS tests was to demonstrate that a stable flightpath could be obtained after engagement from an anomalous initial condition. The extention of the BFS to meet the requirements of the orbital flight test phase is also described.

Chevers, E. S.↗
NASA NTRS2005

Software for Engineering Simulations of a Spacecraft

Spacecraft Engineering Simulation II (SES II) is a C-language computer program for simulating diverse aspects of operation of a spacecraft characterized by either three or six degrees of freedom. A functional model in SES can include a trajectory flight plan; a submodel of a flight computer running navigational and flight-control software; and submodels of the environment, the dynamics of the spacecraft, and sensor inputs and outputs. SES II features a modular, object-oriented programming style. SES II supports event-based simulations, which, in turn, create an easily adaptable simulation environment in which many different types of trajectories can be simulated by use of the same software. The simulation output consists largely of flight data. SES II can be used to perform optimization and Monte Carlo dispersion simulations. It can also be used to perform simulations for multiple spacecraft. In addition to its generic simulation capabilities, SES offers special capabilities for space-shuttle simulations: for this purpose, it incorporates submodels of the space-shuttle dynamics and a C-language version of the guidance, navigation, and control components of the space-shuttle flight software.

Shireman, Kirk↗