SEARCH · Engineering Papers

Results for “Feature tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Tracking and data system support for the Mariner Mars 1971 mission. Prelaunch phase through first trajectory correction maneuver, volume 1

The DSN command system provided the capability to enter commands in a computer at the deep space stations for transmission to the spacecraft. The high-rate telemetry system operated at 16,200 bits/sec. This system will permit return to DSS 14 of full-resolution television pictures from the spacecraft tape recorder, plus the other science experiment data, during the two playback periods of each Goldstone pass planned for each corresponding orbit. Other features included 4800 bits/sec modem high-speed data lines from all deep space stations to Space Flight Operations Facility (SFOF) and the Goddard Space Flight Center, as well as 50,000 bits/sec wideband data lines from DSS 14 to the SFOF, thus providing the capability for data flow of two 16,200 bits/sec high-rate telemetry data streams in real time. The TDS performed prelaunch training and testing and provided support for the Mariner Mars 1971/Mission Operations System training and testing. The facilities of the ETR, DSS 71, and stations of the MSFN provided flight support coverage at launch and during the near-earth phase. The DSSs 12, 14, 41, and 51 of the DSN provided the deep space phase support from 30 May 1971 through 4 June 1971.

Laeser, R. P.↗

NASA NTRS1984

Sampling strategies and four-dimensional assimilation of altimetric data for ocean monitoring and prediction

Numerical experiments using simulated altimeter data were conducted in order to examine the assimilation of altimeter-derived sea surface heights into numerical ocean circulation models. A reduced-gravity, primitive equation circulation model of the Gulf of Mexico was utilized; the Gulf of Mexico was chosen because of its amenability to modeling and the ability of low vertical-mode models to reproduce the observed dynamical features of the Gulf circulation. The simulated data were obtained by flying an imaginary altimeter over the model ocean and sampling the model sea surface just as real altimeter would observe the true ocean. The data were used to initialize the numerical model and the subsequent forecast was compared to the true numerical solution. Results indicate that for a stationary, circular eddy, approximately three to four tracks (either ascending or descending) across the eddy are sufficient to ensure adequate spatial resolution.

Kindle, J. C.↗

NASA NTRS2004

Crustal structure of Mars from gravity and topography

Mars Orbiter Laser Altimeter (MOLA) topography and gravity models from 5 years of Mars Global Surveyor (MGS) spacecraft tracking provide a window into the structure of the Martian crust and upper mantle. We apply a finite-amplitude terrain correction assuming uniform crustal density and additional corrections for the anomalous densities of the polar caps, the major volcanos, and the hydrostatic flattening of the core. A nonlinear inversion for Moho relief yields a crustal thickness model that obeys a plausible power law and resolves features as small as 300 km wavelength. On the basis of petrological and geophysical constraints, we invoke a mantle density contrast of 600 kg m-3; with this assumption, the Isidis and Hellas gravity anomalies constrain the global mean crustal thickness to be >45 km. The crust is characterized by a degree 1 structure that is several times larger than any higher degree harmonic component, representing the geophysical manifestation of the planet's hemispheric dichotomy. It corresponds to a distinction between modal crustal thicknesses of 32 km and 58 km in the northern and southern hemispheres, respectively. The Tharsis rise and Hellas annulus represent the strongest components in the degree 2 crustal thickness structure. A uniform highland crustal thickness suggests a single mechanism for its formation, with subsequent modification by the Hellas impact, erosion, and the volcanic construction of Tharsis. The largest surviving lowland impact, Utopia, post-dated formation of the crustal dichotomy. Its crustal structure is preserved, making it unlikely that the northern crust was subsequently thinned by internal processes.

Neumann, G. A.↗

NASA NTRSDate not supplied

MISR Level 1B2 Ellipsoid Data (MI1B2E_V3)

The MISR instrument consists of nine pushbroom cameras which measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four cameras pointing forward and four cameras pointing aftward. It takes 7 minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid, are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally gaussian, centered at 443, 555, 670, and 865 nm. The Ellipsoid product is referenced to the World Geodetic System 1984 (WGS84) ellipsoid, which approximates the Earth's shape at sea level. In this product, the radiances and associated altitudes are projected to the ellipsoid, so that higher elevation data appear displaced from their true location for non-nadir camera views, much as they are seen by the instrument. (A cloud at location F, or a mountain top at location T in the image below appears as if it is at location E.) The more oblique the camera view, or the higher in altitude the feature, the more displaced the elevated data will appear. This displacement is used to advantage in MISR stereo retrievals, and this product is the primary input to Level 2 top-of-atmosphere/cloud processing. [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=563.2 km (cross-track); Longitude_Resolution=140.8 km (along-track); Temporal_Resolution=about 15 orbits/day; Temporal_Resolution_Range=about 15 orbits/day].

TOA↗

NASA NTRS1984

Intermediate-wavelength magnetic anomalies over the central Pacific

A technique to extract the intermediate wavelength anomaly field from random ship tracks has been developed and is applied to extract the field from marine survey data of the central Pacific in the band pass of 4000-400 km. The technique minimizes the effects of external field sources, secular variation, and strike aliasing. The derived data field is compared to the equivalent MAGSAT data set, and it is shown that anomalies observed in both fields are correlatable to geologic features within the oceanic lithosphere but differ in amplitude by a factor of two. Likely sources for this discrepancy are identified. It is also shown that remanent magnetization of the central Pacific seamounts produces negative magnetic anomalies which are observed at satellite altitude.

Labrecque, J. L.↗

NASA NTRS1991

Top/bottom multisensor remote sensing of Arctic sea ice

Results are presented on the Aircraft/Submarine Sea Ice Project experiment carried out in May 1987 to investigate concurrently the top and the bottom features of the Arctic sea-ice cover. Data were collected nearly simultaneously by instruments aboard two aircraft and a submarine, which included passive and active (SAR) microwave sensors, upward looking and sidescan sonars, a lidar profilometer, and an IR sensor. The results described fall into two classes of correlations: (1) quantitative correlations between profiles, such as ice draft (sonar), ice elevation (laser), SAR backscatter along the track line, and passive microwave brightness temperatures; and (2) qualitative and semiquantitative correlations between corresponding areas of imagery (i.e., passive microwave, AR, and sidescan sonar).

Comiso, J. C.↗

NASA NTRS2009

Meridional Flow Variations Over Three Solar Cycles - What Happened in Cycle 23?

The meridional flow speed determines the strength of the Sun s polar fields in both surface flux transport models and in flux transport dynamos. The polar fields produced during cycle 23 were half as strong as those produced in the previous two cycles. Helioseismic measurements of the meridional flow over the rising phase of cycle 23 indicated a decrease in flow velocity. This observation was used in flux transport dynamo models to predict a delayed start for cycle 24 and was consistent with weak polar fields and a slower equatorward drift of the active latitudes during cycle 23. On the other hand, the surface flux transport models require a faster meridional flow to produce the weak polar fields. We have begun measurements of the surface meridional flow by tracking the motions of weak (outside active regions) magnetic field elements in magnetograms from SOHO/MDI over cycle 23 and from NSO/Kitt Peak over cycles 21 to 23. We confirm the slowdown of the meridional flow over the rising phase of cycle 23 but find that the flow speed returned to its previous level during the declining phase of cycle 23. Furthermore, this appears to be a normal feature of the meridional flow during sunspot cycles. The flow is fast at minima and slow at maxima. The lack of a significantly different meridional flow during cycle 23 is very problematic for both surface flux transport models and flux transport dynamos.

Hathaway, David H.↗

NASA NTRS2006

Improvement in Visual Target Tracking for a Mobile Robot

In an improvement of the visual-target-tracking software used aboard a mobile robot (rover) of the type used to explore the Martian surface, an affine-matching algorithm has been replaced by a combination of a normalized- cross-correlation (NCC) algorithm and a template-image-magnification algorithm. Although neither NCC nor template-image magnification is new, the use of both of them to increase the degree of reliability with which features can be matched is new. In operation, a template image of a target is obtained from a previous rover position, then the magnification of the template image is based on the estimated change in the target distance from the previous rover position to the current rover position (see figure). For this purpose, the target distance at the previous rover position is determined by stereoscopy, while the target distance at the current rover position is calculated from an estimate of the current pose of the rover. The template image is then magnified by an amount corresponding to the estimated target distance to obtain a best template image to match with the image acquired at the current rover position.

Kim, Won↗

NASA NTRS2015

The Ocean Colour Climate Change Initiative: II. Spatial and Temporal Homogeneity of Satellite Data Retrieval Due to Systematic Effects in Atmospheric Correction Processors

The established procedure to access the quality of atmospheric correction processors and their underlying algorithms is the comparison of satellite data products with related in-situ measurements. Although this approach addresses the accuracy of derived geophysical properties in a straight forward fashion, it is also limited in its ability to catch systematic sensor and processor dependent behaviour of satellite products along the scan-line, which might impair the usefulness of the data in spatial analyses. The Ocean Colour Climate Change Initiative (OC-CCI) aims to create an ocean colour dataset on a global scale to meet the demands of the ecosystem modelling community. The need for products with increasing spatial and temporal resolution that also show as little systematic and random errors as possible, increases. Due to cloud cover, even temporal means can be influenced by along-scanline artefacts if the observations are not balanced and effects cannot be cancelled out mutually. These effects can arise from a multitude of results which are not easily separated, if at all. Among the sources of artefacts, there are some sensor-specific calibration issues which should lead to similar responses in all processors, as well as processor-specific features which correspond with the individual choices in the algorithms. A set of methods is proposed and applied to MERIS data over two regions of interest in the North Atlantic and the South Pacific Gyre. The normalised water leaving reflectance products of four atmospheric correction processors, which have also been evaluated in match-up analysis, is analysed in order to find and interpret systematic effects across track. These results are summed up with a semi-objective ranking and are used as a complement to the match-up analysis in the decision for the best Atmospheric Correction (AC) processor. Although the need for discussion remains concerning the absolutes by which to judge an AC processor, this example demonstrates clearly, that relying on the match-up analysis alone can lead to misjudgement.

Ocean Colour↗

NASA NTRS1983

Preliminary analysis of Shuttle multispectral radiometer data for southern Egypt

The Shuttle Multispectral Infrared Radiometer (SMIRR) is a spectroradiometer covering the region from 0.5 to 2.5 microns in 10 channels that acquired data from spots 100 m in diameter along the subspacecraft ground track. It was flown aboard the second flight of the Space Shuttle Columbia, November 12-14, 1981. Data collected during orbit 16 over southern Egypt show that carbonate rocks, kaolinite, and possibly montmorillonite can be identified by their SMIRR spectral signatures and limited knowledge of the lithologic units present. Detailed analysis of SMIRR data for this area indicates that calcite, kaolinite, and montmorillonite rocks give rise to absorption features that result in characteristic 10 channel spectra.

Rowan, L. C.↗

NASA NTRS1987

Direct adaptive control of manipulators in Cartesian space

A new adaptive-control scheme for direct control of manipulator end effector to achieve trajectory tracking in Cartesian space is developed in this article. The control structure is obtained from linear multivariable theory and is composed of simple feedforward and feedback controllers and an auxiliary input. The direct adaptation laws are derived from model reference adaptive control theory and are not based on parameter estimation of the robot model. The utilization of adaptive feedforward control and the inclusion of auxiliary input are novel features of the present scheme and result in improved dynamic performance over existing adaptive control schemes. The adaptive controller does not require the complex mathematical model of the robot dynamics or any knowledge of the robot parameters or the payload, and is computationally fast for on-line implementation with high sampling rates. The control scheme is applied to a two-link manipulator for illustration.

Seraji, H.↗

NASA NTRS1992

Performance of the ice motion tracker at the Alaska SAR facility

An ice motion tracker has been implemented as part of the Ice/Ocean Geophysical Processor System (GPS) at the Alaska Synthetic Aperture Radar (SAR) Facility. The motion tracker operates in an unsupervised mode and utilizes a combination of feature-based and area-based matching to construct the displacement field from time-separated SAR imagery. The tracker is used to generate routine motion products for investigations of the kinematics and dynamics of sea ice in the polar regions. A number of filters for elimination of outliers and incorrect matches have been implemented to maintain the quality of the motion vector product. Preliminary evaluation of the tracking algorithm with European Space Agency Remote Sensing Satellite (ERS-1) data indicate that these requirements are satisfied. The performance and shortcomings of the motion tracker are discussed.

Kwok, Ronald↗

NASA NTRSDate not supplied

MISR Level 1B2 Ellipsoid Data (MI1B2E_V1)

The MISR instrument consists of nine pushbroom cameras which measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four cameras pointing forward and four cameras pointing aftward. It takes 7 minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid, are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally gaussian, centered at 443, 555, 670, and 865 nm. The Ellipsoid product is referenced to the World Geodetic System 1984 (WGS84) ellipsoid, which approximates the Earth's shape at sea level. In this product, the radiances and associated altitudes are projected to the ellipsoid, so that higher elevation data appear displaced from their true location for non-nadir camera views, much as they are seen by the instrument. (A cloud at location F, or a mountain top at location T in the image below appears as if it is at location E.) The more oblique the camera view, or the higher in altitude the feature, the more displaced the elevated data will appear. This displacement is used to advantage in MISR stereo retrievals, and this product is the primary input to Level 2 top-of-atmosphere/cloud processing. [Location=GLOBAL] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=563.2 km (cross-track); Longitude_Resolution=140.8 km (along-track); Horizontal_Resolution_Range=250 meters - < 500 meters; Temporal_Resolution=about 15 orbits/day; Temporal_Resolution_Range=about 15 orbits/day].

EOSDIS↗

NASA NTRSDate not supplied

MISR Level 1B2 Ellipsoid Data (MI1B2E_V2)

The MISR instrument consists of nine pushbroom cameras which measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four cameras pointing forward and four cameras pointing aftward. It takes 7 minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid, are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally gaussian, centered at 443, 555, 670, and 865 nm. The Ellipsoid product is referenced to the World Geodetic System 1984 (WGS84) ellipsoid, which approximates the Earth's shape at sea level. In this product, the radiances and associated altitudes are projected to the ellipsoid, so that higher elevation data appear displaced from their true location for non-nadir camera views, much as they are seen by the instrument. (A cloud at location F, or a mountain top at location T in the image below appears as if it is at location E.) The more oblique the camera view, or the higher in altitude the feature, the more displaced the elevated data will appear. This displacement is used to advantage in MISR stereo retrievals, and this product is the primary input to Level 2 top-of-atmosphere/cloud processing. [Location=GLOBAL] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=563.2 km (cross-track); Longitude_Resolution=140.8 km (along-track); Horizontal_Resolution_Range=500 meters - < 1 km; Temporal_Resolution=about 15 orbits/day; Temporal_Resolution_Range=about 15 orbits/day].

EOSDIS↗

NASA NTRS2011

Source Lines Counter (SLiC) Version 4.0

Source Lines Counter (SLiC) is a software utility designed to measure software source code size using logical source statements and other common measures for 22 of the programming languages commonly used at NASA and the aerospace industry. Such metrics can be used in a wide variety of applications, from parametric cost estimation to software defect analysis. SLiC has a variety of unique features such as automatic code search, automatic file detection, hierarchical directory totals, and spreadsheet-compatible output. SLiC was written for extensibility; new programming language support can be added with minimal effort in a short amount of time. SLiC runs on a variety of platforms including UNIX, Windows, and Mac OSX. Its straightforward command-line interface allows for customization and incorporation into the software build process for tracking development metrics. T

Monson, Erik W.↗

NASA NTRS2015

Anomalous Cases of Astronaut Helmet Detection

An astronaut's helmet is an invariant, rigid image element that is well suited for identification and tracking using current machine vision technology. Future space exploration will benefit from the development of astronaut detection software for search and rescue missions based on EVA helmet identification. However, helmets are solid white, except for metal brackets to attach accessories such as supplementary lights. We compared the performance of a widely used machine vision pipeline on a standard-issue NASA helmet with and without affixed experimental feature-rich patterns. Performance on the patterned helmet was far more robust. We found that four different feature-rich patterns are sufficient to identify a helmet and determine orientation as it is rotated about the yaw, pitch, and roll axes. During helmet rotation the field of view changes to frames containing parts of two or more feature-rich patterns. We took reference images in these locations to fill in detection gaps. These multiple feature-rich patterns references added substantial benefit to detection, however, they generated the majority of the anomalous cases. In these few instances, our algorithm keys in on one feature-rich pattern of the multiple feature-rich pattern reference and makes an incorrect prediction of the location of the other feature-rich patterns. We describe and make recommendations on ways to mitigate anomalous cases in which detection of one or more feature-rich patterns fails. While the number of cases is only a small percentage of the tested helmet orientations, they illustrate important design considerations for future spacesuits. In addition to our four successful feature-rich patterns, we present unsuccessful patterns and discuss the cause of their poor performance from a machine vision perspective. Future helmets designed with these considerations will enable automated astronaut detection and thereby enhance mission operations and extraterrestrial search and rescue.

Dolph, Chester↗

NASA NTRS1971

Cepheid variables and the Magellanic Clouds.

The Magellanic Cloud variables differ from variables in the Galaxy by the number of variables at different periods, by the period-amplitude relation, and by the mean color. Schematic evolutionary tracks are used to demonstrate how a proposed difference between Galactic evolution and Small Magellanic Cloud evolution might be responsible for the observed mean colors and frequencies of occurrence of cepheid variables with different periods. The frequency of short-period cep heids is seen to be a very sensitive indicator of some, not yet fully understood, aspect of abundances. It is demonstrated that the characteristic second-bump feature appearing in the light curves of cepheids with the period range from 7 to 15 days can be used to determine stellar mass and radius on the basis of calculations of interior motions.-

Christy, R. F.↗

NASA NTRS1973

Feasibility model of a high reliability five-year tape transport, volume 2

Analysis of the design features of the modularized tape transport renders a life expectancy in excess of five years. Tests performed on the tape transport were directed toward determining its performance capability. These tests revealed that the tape jitter and skew are in the range achieved by high quality digital tape transports. Guidance of the tape in the lateral sense by the use of the two hybrid crowned rollers proved to be excellent. Tracking was maintained within less than one thousandth inch (approximately 2 micrometers). The guidance capability demonstrated makes possible the achievement of the performance objective of 7.2 x 10 to the 9th power storage capability employing 1500 ft. of one inch wide tape with a packing density of 5,000 bits per inch per track on 80 tracks. Also, the machine showed excellent characteristics operating over a wide range of tape speeds. The basic design concept lends itself to growth and adaptation to a wide range of recorder requirements.

Eshleman, R. L.↗