Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FRACTURE PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Microstructure and mechanical properties of thermoelectric nanostructured n-type silicon-germanium alloys synthesized employing spark plasma sintering

Owing to their high thermoelectric (TE) figure-of-merit, nanostructured Si{sub 80}Ge{sub 20} alloys are evolving as a potential replacement for their bulk counterparts in designing efficient radio-isotope TE generators. However, as the mechanical properties of these alloys are equally important in order to avoid in-service catastrophic failure of their TE modules, we report the strength, hardness, fracture toughness, and thermal shock resistance of nanostructured n-type Si{sub 80}Ge{sub 20} alloys synthesized employing spark plasma sintering of mechanically alloyed nanopowders of its constituent elements. These mechanical properties show a significant enhancement, which has been correlated with the microstructural features at nano-scale, delineated by transmission electron microscopy.

36 MATERIALS SCIENCE↗

Characterization of the Mechanical Properties of DAP and Seabreeze

The primary reason for this investigation was to determine the most accurate means of measuring the effect of aging in these materials. Initial characterization was pursued to find the most sensitive, repeatable test that would have the least amount of scatter in the test results. Preliminary investigations let to the conclusion that the fracture toughness would likely be the property to show the greatest change in behavior for any intrinsic material property. Test configurations that were initially considered were tensile tests, 3 and 4 point bend tests, Brazil tests, Brazil tests with initial damage and finally a test geometry that is being called a “compression – fracture“ test. The tensile test will continue to be done because it will be used to generate information about the Poisson’s ratio, which can be used in simulations that would verify the test results presented in this report. The bend bar and Brazil test configurations were tried and determined to be unsuitable because they allowed for unstable crack growth in the materials. The result of these investigations on un-pedigreed materials leading to the selection and use of a test geometry that has subsequently been used on pedigreed materials is the focus of this report.

36 MATERIALS SCIENCE↗

Recovery of Kraft Lignin from OPEFB and Using for Lignin–Agarose Hydrogel

Lignins from the spent pulping liquor were normally acquired as waste product of pulp and paper mills. The possibilities of utilizing kraft lignin have yet been developed for commercial innovation. The objectives of this research are to recovery and utilization of lignin from black liquor of oil palm empty fruit bunches (OPEFBs). Kraft lignins from the OPEFBs black liquor were recovered by acidification procedure. They were precipitated at pH 4, 3, and 2 in order that determine the optimum pH for isolation. It can be clearly seen that the best condition of lignin precipitation was at pH 3. It offered the highest yield and purity. The kraft lignin and agarose were utilized as the crude material for the production of lignin–agarose hydrogel. Lignin–agarose hydrogel could be prepared by using epichlorohydrin as the cross-linking agent. The cross-linking occurrence was recognized by FTIR. Physical and chemical properties of hydrogel were investigated. Gel strength of lignin–agarose hydrogel was characterized by texture personal analysis. The results demonstrated that the gel strength increased with increasing of lignin and epichlorohydrin (ECH) in agarose solutions. 5% lignin, 5% agarose and 10 mL ECH contributed the best gel formation and the great mechanical properties. The effect of cross-linking condition on the gel properties, for example, gel hardness and fracturability, was examined.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Plan for Post-Irradiation Examination of Zion Reactor Pressure Vessel Beltline Materials

The reactor pressure vessel (RPV) is a potentially life-limiting component in light-water reactors (LWR) because replacement of the RPV is not considered a viable option. Researchers studying the effects of radiation on RPV materials have long been interested in evaluating service-irradiated materials to assess currently available models for predicting radiation embrittlement of RPV steels. The decommissioning of the Zion Unit 1 NPP in Zion, Illinois presents a unique opportunity for characterization of an actual reactor pressure vessel (RPV) material after inservice degradation. The main interests in this case are the belt-line weld and base metals. Through-RPV wall thickness attenuation and chemical composition distributions are the obvious objectives of this characterization program. However, it also provides an opportunity to examine the inservice degradation and its comparison with currently available models for prediction of radiation embrittlement of RPV steels. All of these efforts will provide a better understanding of materials degradation and other issues associated with extending the lifetime of existing NPPs beyond 60 years of service. The primary foci are the Linde 80 flux, wire heat 72105 (WF-70) circumferential belt-line weld and the A533B-1 base metal from the intermediate shell harvested from a region of peak fluence (0.7 x 10{sup 19} n/cm{sup 2}, E > 1.0 MeV) on the internal surface of the Zion Unit 1 vessel. Following determination of the through-thickness chemical composition, Charpy impact, fracture toughness, tensile, and hardness testing will be being performed to characterize the through-thickness mechanical properties of the base metal and belt-line-weld materials. In addition to mechanical properties, microstructural characterizations will be performed using various techniques, including Atom Probe Tomography, Small Angle Neutron Scattering, and Positron Annihilation Spectroscopy.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantifying dry supercritical CO 2 -induced changes of the Utica Shale

Traditionally, shale formations have been studied as sealing layers that prevent vertical migration of hydrocarbons and CO2 due to their low permeability and fracture porosity. Recent research has focused on storing CO2 in hydrocarbon-bearing shale formations that have already undergone depletion through primary production and using CO2 as a potential fracturing agent for unconventional reservoirs. The injected CO2 will interact with shale components (i.e. clays, organic matter) and affect rock properties through chemical alteration, matrix swelling/shrinkage, and related geomechanical effects. As changes in rock properties will impact both anthropogenic CO2 storage and hydraulic fracturing, it is imperative to increase our understanding of the CO2-shale interactions. In-situ Fourier Transform infrared (FT-IR) spectroscopy coupled with high temperature and pressure capability was used to examine the interaction of dry CO2 on Utica Shale, clay, and kerogen samples at the molecular scale and characterize vibrational changes of sorption bands sensitive to the gas-solid environment. The Utica Shale was also analyzed for micro and macro-scale chemical and physical changes before and after exposure to dry CO2 at subsurface storage conditions using surface relocation techniques via high-resolution field-emission scanning electron microscopy (FE-SEM). Brunauer-Emmett-Teller (BET) surface area/pore size analysis and quantitative adsorption isotherms were applied to understand changes in surface area, pore volumes, and understand the storage potential of CO2 in the Utica Shale sample. FT-IR and feature relocation via FE-SEM indicate carbonate formation and dissolution occurs in shale exposed to dry CO2. Results indicate that etching and pitting occur, with minor calcite precipitation along the surface of the shale sample. Quantitative isotherm results indicate that shales with a higher content of kerogen and illite-smectite clays would be expected to have the highest CO2 storage capacity provided these constituents were accessible for interaction.

04 OIL SHALES AND TAR SANDS↗

Research on the interfacial structure and property improvement of the Cfiber/2Si-B-3C-N ceramic matrix composite

Highlights: • The C{sub fiber}/2Si-B-3C-N composite with nice properties was successfully prepared. • ZrO{sub 2} promotes the densification process, homogeneous nucleation and grain growth. • The interface reaction in the composite was well controlled by the addition of ZrO{sub 2}. • The damage to carbon fiber was largely avoided by the addition of ZrO{sub 2}. - Abstract: A mixture of the mechanically alloyed 2Si-B-3C-N powder and short carbon fiber was hot pressed at 1800 °C for 30 mins in nitrogen. Careful investigation to the prepared C{sub fiber}/2Si-B-3C-N ceramic matrix composite revealed that the composite was very difficult to be densified. Heterogeneous nucleation, abnormal grain growth and severe interface reaction occurred on the fiber surface or between the fiber and the ceramic matrix, leading to a small density and weak mechanical properties of the composite. For the prepared composite without any additive, the relative density, flexural strength, elastic modulus and fracture toughness is 71.7%, 64.6 MPa, 14.7 GPa and 1.47 MPa·m{sup 1/2}, respectively. The average size of the SiC grains close to and far away from the carbon fiber is 249.10 nm and 50.45 nm, respectively. However, with the addition of ZrO{sub 2} (7.5 mol%), the above mentioned phenomenons are changed noticeably, and those properties are significantly increased to 88.5%, 112.4 MPa, 111.1 GPa and 2.94 MPa·m{sup 1/2}, respectively. At the same time, the SiC grains close to or far away from the carbon fiber almost have the same average size of about 448.21 nm, and almost no interface reaction occurs. It shows that the addition of ZrO{sub 2} not only facilitates the sintering and densification process, but also depresses the interface reaction, promotes the homogeneous nucleation and grain growth, and hence significantly improves the mechanical properties of the C{sub fiber}/2Si-B-3C-N composite. This interesting finding is favorable for the preparation of carbon fiber reinforced ceramic matrix composite, which requires both a large relative density and well controlled interface reaction.

36 MATERIALS SCIENCE↗

Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys

A study was conducted: (1) to develop rapid solidification processed (RSP) dispersoid-containing Al-3Cu-2Li-1Mg-0.2Zr alloys as substitutes for titanium alloys and commercial 2XXX aluminum alloys for service to at least 150 C; and (2) to develop RSP Al-4Li-Cu-Mg-Zr alloys as substitutes for high-strength commercial 7XXX alloys in ambient-temperature applications. RSP Al-3Cu-2Li-1Mg-0.2Zr alloys have density-normalized yield stresses at 150 C up to 52% larger than that of 2124-T851 and up to 30% larger than that of Ti-6Al-4V. Strength at 150 C in these alloys is provided by thermally stable delta' (Al3Li), T1 (Al2LiCu), and S' (Al2CuMg) precipitates. Density-normalized yield stresses of RSP Al-3Cu-2Li-1Mg-0.2Zr alloys are up to 100% larger than that of 2124-T851 and equivalent to that of Al-8Fe-4Ce at 260 C. Strength in the RSP alloys at 260 C is provided by incoherent dispersoids and subboundary constituent particles such as T1 and S. The RSP alloys are attractive substitutes in less than or = 100-h exposures for 2xxx and Al-4Fe-Ce alloys up to 260 C and for titanium alloys up to 150 C. RSP Al-4Li-Cu-Mg-Zr alloys have ambient-temperature yield and ultimate tensile stresses similar to that of 7050-T7651, and are 14% less dense. RSP Al-4Li-0.5Cu-1.5Mg-0.2Zr has a 20% higher specific yield stress, 40% higher specific elastic modulus, and superior corrosion resistance compared to the properties of 7050-T7651. Strength in the Al-4Li-Cu-Mg-Zr alloy class is primarily provided by the substructure and delta' precipitates and is independent of Cu:Mg ratio. Improvements in fracture toughness and transverse-orientation properties in both alloy classes depend on improved melt practices to eliminate oxide inclusions which are incorporated into the consolidated forms.

Meschter, P. J.↗

Development of atomistic models to aid the design of new scintillator materials.

The development of more reliable scintillator materials can significantly advance the gamma-ray detection technology. Scintillator materials such as lanthanum halides (e.g., LaBr{sub 3}, CsBr{sub 3}), elpasolites (e.g., Cs{sub 2}LiLaBr{sub 6}, Cs{sub 2}NaLaBr{sub 6}, and Cs{sub 2}LiLaI{sub 6}), and alkali halides (e.g., CsI, NaI) are extremely brittle. The fracture of the materials is often a problem causing the failure of the devices. Lanthanum halides typically have a hexagonal crystal structure. These materials have highly anisotropic thermal and mechanical properties, and therefore they are likely to fracture under cyclic thermal and mechanical loading conditions. For example, fracture of lanthanum halides is known to occur in the field. Fracture during synthesis also complicates the growth of large lanthanum halide single crystals needed for sensitive radiation detection, and accounts for the high production cost of these materials. Elpasolites can have both cubic and non-cubic crystal structures depending on the constituent elements and composition of the compounds. This provides an opportunity to design cubic elpasolites with more isotropic properties and therefore improved mechanical performances. However, the design of an optimized cubic elpasolite crystal remains elusive because there is a tremendous number of possible elpasolites and the design criterion for cubic crystals is not clear. Alkali halides have cubic crystal structures. Consequently, large CsI and NaI crystals have been grown and used in devices. However, these materials suffer from an aging problem, i.e., the properties decay rapidly over time especially under harsh environment. Unfortunately, the fundamental mechanisms of this aging have not been understood and the path to improve the alkali halide-based scintillators is not developed. Clearly, improved scintillator materials can be achieved via strengthened/toughened lanthanum halides, optimized cubic elpasolites, or new alkali halide-based crystals that are more resistant to aging. Without a fundamental understanding of the atomic origins of the mechanical and the thermodynamic properties of materials, past experimental efforts to develop improved scintillator materials have been prolonged. Here we report our recent progress on the development of atomistic models that can be used to accelerate the discovery of new scintillator materials with improved properties. First, we have developed a novel embedded-ion method interatomic potential approach that analytically addresses the variable charge interactions between atoms in ionic compound material systems. Based on this potential, molecular dynamics simulations have been used to study the mechanical properties of LaBr3 including slip systems, dislocation core structures, and material strength. We have also developed an atomistic model that can already be used to predict crystal structures and to derive crystal stability rules for alkali halides. This model is under further development for prediction of crystal structures of elpasolites. These efforts will facilitate the design of better scintillator materials.

36 MATERIALS SCIENCE↗

Effect of Aging on Fracture Toughness: Using Digital Image Correlation on DAP and Seabreeze [Slides]

The primary reason for this investigation was to determine the most accurate means of measuring the effect of aging in these materials. Initial characterization was pursued to find the most sensitive, repeatable test that would have the least amount of scatter in the test results. Preliminary investigations let to the conclusion that the fracture toughness would likely be the property to show the greatest change in behavior for any intrinsic material property. Test configurations that were initially considered were tensile tests, 3 and 4 point bend tests, Brazil tests, Brazil tests with initial damage and finally a test geometry that is being called a ‘compression- fracture" test. The tensile test will continue to be done because it will be used to generate information about the Poisson's ratio, which can be used in simulations that would verify the test results presented in this report. The bend bar and Brazil test configurations were tried and determined to be unsuitable because they allowed for unstable crack growth in the materials. The result of these investigations on un-pedigreed materials leading to the selection and use of a test geometry that has subsequently been used on pedigreed materials is the focus of this presentation.

36 MATERIALS SCIENCE↗

Mechanism of Microseismic Generation During Hydraulic Fracturing - With Evidence From HFTS 2 Observations

The objective of this study is to understand how microseismic events are generated during hydraulic fracturing, as well as the role of geomechanical conditions (i.e., stress and mechanical stratigraphy) in this process. In the industry, microseismic event clouds have been generally used as an “outer-boundary” of the “stimulated reservoir volume” (SRV). However, by comparing with other surveillance data (Low frequency Distributed Acoustic Sensing, or LF-DAS strain) in the Hydraulic Fracturing Test Site (HFTS) 2 experiment, we show that this assumption is fundamentally flawed. The HFTS 2 data has three unique observations that have not been commonly observed in other datasets: 1. Due to influence of offset pad depletion, microseismic data shows that hydraulic fractures from the child well can propagate over 3000 feet into the depleted low stress zone. 2. By comparing microseismic and horizontal fiber LF-DAS strain data, we observe that microseismic event cloud does not necessarily reflect the created hydraulic fracture volume. Particularly, the extent of microseismic event clouds near heel stages are much shorter than what is shown with LF-DAS strain data. 3. Microseismic event magnitudes are larger in the depleted regions. Through geomechanical analysis, we demonstrate that the “bedding-plane-slip” model is likely the mechanism for microseismic generation during hydraulic fracturing. Furthermore, this model successfully explains the above field observations from HFTS 2 experiment. We also provide a quantitative relationship connecting the microseismic event magnitude with fracture width increment and layer mechanical property contrast.

58 GEOSCIENCES↗

High-Temperature Erosive Behavior of Plasma Sprayed Cr{sub 3}C{sub 2}-NiCr/Cenosphere Coating

This research examines the deposition of Cr{sub 3}C{sub 2}-NiCr/cenosphere and Cr{sub 3}C{sub 2}-NiCr coatings on MDN 321 steel through the process of plasma spray. In this process, the solid particle erosion test is established at 200, 400, 600 °C with 30° and 90° impact angles. Alumina erodent is adopted to investigate the erosive behavior of the coating at higher temperatures. The properties of the Cr{sub 3}C{sub 2}-NiCr/cenosphere coating are established based on the microhardness, the adhesive strength, the fracture toughness, and the ductility. To quantify volume loss as a result of erosion, an optical profilometer is used. At higher temperature, decrease in the erosion volume loss of Cr{sub 3}C{sub 2}-NiCr/cenosphere and Cr{sub 3}C{sub 2}-NiCr coatings is observed. The erosion-resistive property of Cr{sub 3}C{sub 2}-NiCr/cenosphere coating is higher than that of MDN 321 steel by 76%. This property is influenced by high-temperature stability of mullite, alumina, and protective oxide layer that is formed at elevated temperatures. The morphology of eroded coating discloses a brittle mode of material removal.

36 MATERIALS SCIENCE↗

Long-term stability and properties of zirconia ceramics for heavy duty diesel engine components

Physical, mechanical, and thermal properties of commercially available transformation-toughened zirconia are measured. Behavior is related to the material microstructure and phase assemblage. The stability of the materials is assessed after long-term exposure appropriate for diesel engine application. Properties measured included flexure strength, elastic modulus, fracture toughness, creep, thermal shock, thermal expansion, internal friction, and thermal diffusivity. Stability is assessed by measuring the residual property after 1000 hr/1000C static exposure. Additionally static fatigue and thermal fatigue testing is performed. Both yttria-stabilized and magnesia-stabilized materials are compared and contrasted. The major limitations of these materials are short term loss of properties with increasing temperature as the metastable tetragonal phase becomes more stable. Fine grain yttria-stabilized material (TZP) is higher strength and has a more stable microstructure with respect to overaging phenomena. The long-term limitation of Y-TZP is excessive creep deformation. Magnesia-stabilized PSZ has relatively poor stability at elevated temperature. Overaging, decomposition, and/or destabilization effects are observed. The major limitation of Mg-PSZ is controlling unwanted phase changes at elevated temperature.

Larsen, D. C.↗

Atomic and electronic basis for the serrations of refractory high-entropy alloys

Refractory high-entropy alloys present attractive mechanical properties, i.e., high yield strength and fracture toughness, making them potential candidates for structural applications. Understandings of atomic and electronic interactions are important to reveal the origins for the formation of high-entropy alloys and their structure-dominated mechanical properties, thus enabling the development of a predictive approach for rapidly designing advanced materials. Here, we report the atomic and electronic basis for the valence-electron-concentration-categorized principles and the observed serration behavior in high-entropy alloys and high-entropy metallic glass, including MoNbTaW, MoNbVW, MoTaVW, HfNbTiZr, and Vitreloy-1 MG (Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 ). We find that the yield strengths of high-entropy alloys and high-entropy metallic glass are a power-law function of the electron-work function, which is dominated by local atomic arrangements. Further, a reliance on the bonding-charge density provides a groundbreaking insight into the nature of loosely bonded spots in materials. The presence of strongly bonded clusters and weakly bonded glue atoms imply a serrated deformation of high-entropy alloys, resulting in intermittent avalanches of defects movement.

36 MATERIALS SCIENCE↗

MINERALOGICAL AND TEXTURAL CONTROLS ON SHEAR STRENGTH, SLIP STABILITY AND PERMEABILITY OF FAULTS

Induced seismicity resulting from fluid injection into the subsurface related to water and CO2 disposal, hydraulic fracturing and the stimulation of geothermal reservoirs present an important societal concern. These human activities involve the injection of large volumes of pressurized fluid into the subsurface, potentially at high rates, raising local pore pressures and disturbing the pristine local stress regime by lowering effective normal stress on pre-existing faults and fractures. The reduction of effective normal stress may trigger fault/fracture reactivation and in some cases result in hazardous seismic ruptures. Effective management and engineering of anthropogenic seismic events requires substantial understanding in the mechanisms, especially for the controlling factors on coupled rheological and transport response, including fault shear strength, slip stability, and permeability evolution during such events. In this study, we explore the coupled rheological and transport response of faults and fractures during reactivation as controlled by two fundamental controlling properties, viz., mineralogy and textural features. We approach this problem through shear experiments on analog faults and fractures via laboratory and numerical experiments. Specifically, we investigate: (1) the influence of frictionally weak minerals (talc) in mixtures of mineral analogs featuring contrasting frictional properties, (2) the influence of iron oxide grain coatings on quartz aggregates, and (3) the influence of fracture roughness in mated fractures on the ensemble shear strength, slip stability, and permeability evolution during reactivation events. We address the following questions in this study: (1) how much and what distribution of frictionally weak minerals is required to induce significant weakening in faults consisting of a matrix of frictionally strong minerals, (2) how does a pre-imposed weak mineral layer influence the rheological and transport behavior of faults, (3) what is the influence of a trace amount of grain coating materials introduce on the coupled behavior of faults, and finally (4) how do asperity height and wave length control the ensemble behavior of faults. These questions are explicitly answered in the following.

58 GEOSCIENCES↗

Investigation of the temperature-dependent failure processes in PVD Cr-coated ZIRLO nuclear fuel cladding using in situ X-ray micro-tomography imaging

In this work, an accident tolerant fuel cladding system with Cr coating deposited using physical vapour deposition (PVD) method onto commercial Optimized ZIRLO™ was studied. The cladding tubes were machined into C-rings and loaded to failure under compression with real-time synchrotron micro-X-ray computed tomography (XCT) imaging at room temperature (RT), 345 °C, 650 °C and 950 °C in argon (Ar) atmosphere. The mechanical behaviour and failure processes were found strongly temperature-dependent where the Cr coating showed brittle fracture at RT and 345 °C, ductile fracture at 650 °C and a reversion to brittle fracture at 950 °C. Nanoindentation measurements and scanning electron microscopy (SEM) imaging were conducted on the materials after high temperature testing. It was found that recrystallisation of the Cr coating occurred at elevated temperatures, which significantly affected its local properties hence the failure behaviour at different temperatures. This work represents the first in situ 3D XCT observation of progressive failure processes in PVD Cr-coated ZIRLO claddings up to 950 °C providing critical insights into its brittle-to-ductile transition (BDTT) behaviour and subsequent ductile-to-brittle reversion with the increase in temperature. Moreover, results are compared with other PVD Cr-coated Zircaloy materials from open literature; the influences of the coating microstructure and local properties on the failure stress/strain and fracture processes are discussed.

Yuan, Guanjie↗

Self-similarity of waiting times in fracture systems

Experimental and numerical results are presented for a fracture experiment carried out on a fiber-reinforced element under flexural loading, and a statistical analysis is performed for acoustic emission waiting-time distributions. By an optimization procedure, a recently proposed scaling law describing these distributions for different event magnitude scales is confirmed by both experimental and numerical data, thus reinforcing the idea that fracture of heterogeneous materials has scaling properties similar to those found for earthquakes. Analysis of the different scaling parameters obtained for experimental and numerical data leads us to formulate the hypothesis that the type of scaling function obtained depends on the level of correlation among fracture events in the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanically induced self-propagating reaction and consequent consolidation for the production of fully dense nanocrystalline Ti{sub 55}C{sub 45} bulk material

We employed a high-energy ball mill for the synthesis of nanograined Ti{sub 55}C{sub 45} powders starting from elemental Ti and C powders. The mechanically induced self-propagating reaction that occurred between the reactant materials was monitored via a gas atmosphere gas-temperature-monitoring system. A single phase of NaCl-type TiC was obtained after 5 h of ball milling. To decrease the powder and grain sizes, the material was subjected to further ball milling time. The powders obtained after 200 h of milling possessed spherical-like morphology with average particle and grain sizes of 45 μm and 4.2 nm, respectively. The end-products obtained after 200 h of ball milling time, were then consolidated into full dense compacts, using hot pressing and spark plasma sintering at 1500 and 34.5 MPa, with heating rates of 20 °C/min and 500 °C/min, respectively. Whereas hot pressing of the powders led to severe grain growth (∼ 436 nm in diameter), the as-spark plasma sintered powders maintained their nanograined characteristics (∼ 28 nm in diameter). The as-synthesized and as-consolidated powders were characterized, using X-ray diffraction, high-resolution electron microscopy, and scanning electron microscopy. The mechanical properties of the consolidated samples obtained via the hot pressing and spark plasma sintering techniques were characterized, using Vickers microhardness and non-destructive testing techniques. The Vickers hardness, Young's modulus, shear modulus and fracture toughness of as-spark plasma sintered samples were 32 GPa, 358 GPa, 151 GPa and 6.4 MPa·m{sup 1/2}, respectively. The effects of the consolidation approach on the grain size and mechanical properties were investigated and are discussed. - Highlights: • Room-temperature synthesizing of NaCl-type TiC • Dependence on the grain size on the ball milling time • Fabrication of equiaxed nanocrystalline grains with a diameter of 4.2 nm • Fabrication of nanocrystalline bulk TiC material by SPS with minimal grain growth • Dependence of improved mechanical properties on the consolidation techniques.

36 MATERIALS SCIENCE↗

Effect of Sintering on Mechanical and Physical Properties of Plasma-Sprayed Thermal Barrier Coatings

The effect of sintering on mechanical and physical properties of free-standing plasma-sprayed ZrO2-8 wt% Y2O3 thermal barrier coatings (TBCs) was determined by annealing them at 1316 C in air. Mechanical and physical properties of the TBCs, including strength, modes I and II fracture toughness, elastic modulus, Poisson s response, density, microhardness, fractography, and phase stability, were determined at ambient temperature as a function of annealing time ranging from 0 to 500 h. All mechanical and physical properties, except for the amount of monoclinic phase, increased significantly in 5 to 100 h and then reached a plateau above 100 h. Annealing resulted in healing of microcracks and pores and in grain growth, accompanying densification of the TBC s body due to the sintering effect. However, an inevitable adverse effect also occurred such that the desired lower thermal conductivity and good expansivity, which makes the TBCs unique in thermal barrier applications, were degraded upon annealing. A model was proposed to assess and quantify all the property variables in response to annealing in a normalized scheme. Directionality of as-sprayed TBCs appeared to have an insignificant effect on their properties, as determined via fracture toughness, microhardness, and elastic modulus measurements.

Choi, Sung R.↗