Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Radiative heat transfer in FLiBe molten salt participating medium in a vertical heated tube under forced and mixed convection laminar flows

The contribution of radiative heat transfer (RHT) to convective heat transfer in a heated vertical pipe with laminar flow and constant wall temperature, for FLiBe molten salt, is investigated computationally. The combined effects of conduction in the fluid, forced convection, buoyancy, temperature-dependent physical properties, and thermal radiation are investigated. The P1 approximation is employed in the discretization of the Radiative Transfer Equation (RTE). The COMSOL Multiphysics software is used to generate the numerical solutions. The theoretical analysis developed here demonstrates that only for intermediate values of the optical thickness, i.e. τ D ~ O 1 , the participating media effects are expected to be important. This analysis is confirmed computationally and a value of τ D ≈ 4 is shown to lead to the highest increase in overall heat transfer behavior. Under forced convection, the Nusselt ratio N u total / N u no - rad reaches a peak value of 1.76 at τ D = 4 and z/D = 200 , and is less than 1.1 for τ D < 0 . 1 and τ D > 60 . Under aiding-flow mixed convection, N u total / N u no - rad reaches a peak of 1.34 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 4 and τ D > 36 . Under opposing-flow mixed convection, Nu total / Nu no - rad reaches a peak of 1.81 at τ D = 4 . 2 and is less than 1.1 for τ D < 0 . 2 and τ D > 50 . RHT effects on the overall heat transfer are most pronounced in opposing mixed convection, where N u total / N u no - rad is 2.26 observed at z/D = 50 . The sensitivity to wall emissivity is evaluated; in forced convection, the peak N u total / N u no - rad is 1.66 at ε = 0 (reflective wall) and 2.04 at ε = 1 (absorptive wall). Finally, the sensitivity to pipe diameter is also discussed. Overall, for a vertical heated tube, radiative heat transfer effects lead to enhancement of heat transfer by as high as a factor of two, and they depend on the optical thickness of the flow, mixed convection environment ( Gr / R e 2 and direction of flow relative to the gravitational force), surface emissivity, and entrance effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of the force coefficients on plates using an open source numerical wave tank

An open source numerical wave tank based on the OpenFOAM® software was setup and tested to solve the Navier-Stokes equations. This work focused on submerged plates because of their simple geometry, their importance as a design component (e.g., heave plates), and the broad availability of published experimental results. Two-dimensional plates in an oscillatory flow, as well as three-dimensional circular disks and square plates undergoing forced oscillations were simulated in conditions where the nonlinearity of hydrodynamic viscous drag and inertia forces can be probed easily. The effect of plate thickness as well as the ability of the numerical simulations to predict wave radiation damping at shallow plate submergence were also considered. Overall, force coefficient predictions were very satisfactory when compared to experimental data, and generally exhibited less scatter. Here, the influence of both Keulegan-Carpenter number and frequency parameter on the hydrodynamic force could be assessed as well from these numerical simulations as from past laboratory experiments.

13 HYDRO ENERGY↗

Refined Classical Force Field for Choline Chloride and Ethylene Glycol Mixtures over Wide Composition Range

In this work, a classical force field based on the General Amber Force Field (GAFF) was refined for the simulation of choline chloride (ChCl) and ethylene glycol (EG) mixtures over a wide composition range by scaling the partial charges and van der Waals parameters. The scaling factors were derived by fitting the simulation results to only eight experimental density and viscosity data points of pure EG, and ChCl/EG mixtures at 1:2, 1:4, and 1:6 molar ratios. Using the refined force field, properties essential for electrochemical applications such as density, viscosity, self-diffusion coefficient, and ionic conductivity were calculated, and excellent agreement to experimental results was found even for compositions and temperatures not used in the fitting procedure. In addition, new experimental data for density, viscosity, and ionic conductivity are reported as a function of temperature and composition for this mixture. To the best of our knowledge, this is the first classical force field developed for the study of ChCl/EG mixtures over a composition range that includes the eutectic point. Using the new model, the liquid dynamics was studied in terms of ionic conductivity. It was found that the dynamics in ChCl/EG mixtures with ChCl mole fraction higher than 20% is similar to that of ionic liquids, high temperature molten salts, and highly concentrated water-in-salt electrolytes.

25 ENERGY STORAGE↗

Recent Advances for Improving the Accuracy, Transferability, and Efficiency of Reactive Force Fields

Reactive force fields provide an affordable model for simulating chemical reactions at a fraction of the cost of quantum mechanical approaches. However, classically accounting for chemical reactivity often comes at the expense of accuracy and transferability, while computational cost is still large relative to nonreactive force fields. Here, we summarize recent efforts for improving the performance of reactive force fields in these three areas with a focus on the ReaxFF theoretical model. To improve accuracy, we describe recent reformulations of charge equilibration schemes to overcome unphysical long-range charge transfer, new ReaxFF models that account for explicit electrons, and corrections for energy conservation issues of the ReaxFF model. To enhance transferability we also highlight new advances to include explicit treatment of electrons in the ReaxFF and hybrid nonreactive/reactive simulations that make it possible to model charge transfer, redox chemistry, and large systems such as reverse micelles within the framework of a reactive force field. To address the computational cost, we review recent work in extended Lagrangian schemes and matrix preconditioners for accelerating the charge equilibration method component of ReaxFF and improvements in its software performance in LAMMPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Short-Range Forces on Defect Production from High-Energy Collisions

Primary radiation damage formation in solid materials typically involves collisions between atoms that have up to a few hundred keV of kinetic energy. The distance between two colliding atoms can approach 0.05 nm during these collisions. At such small atomic separations, force fields fitted to equilibrium properties tend to significantly underestimate the potential energy of the colliding dimer. To enable molecular dynamics simulations of high-energy collisions, it is common practice to use a screened Coulomb force field to describe the interactions and to smoothly join this to the equilibrium force field at a suitable interatomic spacing. But, there is no accepted standard method for choosing the parameters used in the joining process, and our results prove that defect production is sensitive to how the force fields are linked. A new procedure is presented that involves the use of ab initio calculations to determine the magnitude and spatial dependence of the pair interactions at intermediate distances, along with systematic criteria for choosing the joining parameters. Results are presented for the case of nickel, which demonstrate the use and validity of the procedure.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reparameterizing a Lipid Force Field Using Small-Angle X-ray Scattering to Improve Predictions of Multicomponent Membranes under Organic Solvent Stress

Understanding and predicting properties of lipid-bilayer membranes are essential to elucidating organismal physiology and pathophysiology. Therefore, substantial efforts have been undertaken to derive accurate molecular-mechanics force fields (FF) to allow simulation of their properties; however, much of these past efforts focused on tuning force fields to accurately reproduce the properties of model single-component membranes and not multicomponent or stressed membranes. Here, we tuned the CHARMM36 FF for a simple 2-component model of a Gram-positive bacterium. This updated force field is parametrized against a single condensed-phase property, the small-angle X-ray scattering (SAXS) intensities of the 2-component lipid system, using a version of ForceBalance implemented previously (named ForceBalance-SAS) with SAXS and small-angle neutron scattering (SANS) intensities as optimization targets. After tuning, we observe improved agreement with the experimental SAXS of the membrane under 1-butanol and tetrahydrofuran solvent stresses, with a factor of 10.0 and 7.5 reduction, respectively, in χ 2 , the measure of the discrepancy between experimental and computed SAXS intensities. Furthermore, this reparametrized force field yielded improved agreement between experimental and simulated membrane thicknesses for the pure lipid systems. However, we note limitations in transferability and diagnose the source of such limitations, particularly the need for SANS in addition to SAXS.

Demerdash, Omar N. A. [Oak Ridge National Laborato↗

Solution Structure and Hydration Forces between Mica and Hydrophilic Versus Hydrophobic Surfaces

Solid-liquid interfaces are central to a range of interesting phenomena including catalysis, heterogeneous nucleation, water desalination, and biomolecular assembly. While three-dimensional Fast Force Mapping (3D FFM) has emerged as a technique for resolving interfacial solution structure at the molecular scale, key challenges for data interpretation persist, most notably regarding the influence of the probe on the measured structure. Using the mica-water system as a case study, we investigate the effect of hydrophilic and hydrophobic probes on interfacial solution structure measured by 3D FFM. Data from hydrophilic silicon-based probes are in good agreement with molecular dynamics simulations, wherein the innermost water molecules adsorb preferentially at the surface ditrigonal cavity sites followed by two subsequent hydration layers. In contrast, the hydrophobic carbon-based probes detect vertical oscillatory features, but do not show lateral patterning that matches the underlying mica lattice. At high ionic strength, up to six of these oscillatory features are observed extending 2 nm into the solution phase with an average spacing of 0.29 ± (0.04) nm. Further, we also determine that the repulsive hydration force between mica and the hydrophilic probe depends on the nature and concentration of ions in solution. Specifically, solutions with stronger ion-water and ion-ion interactions increase the interfacial viscosity, which results in a stronger repulsive hydration force as the probe approaches the surface. Based on these observations, we present a scheme for controlling the outcomes of particle attachment and aggregation by varying the solution conditions to tune the hydration force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Balance of Attraction and Repulsion in Nucleic-Acid Base Stacking: CCSD(T)/Complete-Basis-Set-Limit Calculations on Uracil Dimer and a Comparison with the Force-Field Description

We have carried out reference quantum-chemical calculations for about 100 geometries of the uracil dimer in stacked conformations. The calculations have been specifically aimed at geometries with unoptimized distances between the monomers including geometries with mutually tilted monomers. Such geometries are characterized by a delicate balance between local steric clashes and local unstacking and had until now not been investigated using reference quantummechanics (QM) methods. Nonparallel stacking geometries often occur in nucleic acids and are of decisive importance, for example, for local conformational variations in B-DNA. Errors in the shortrange repulsion region would have a major impact on potential energy scans which were often used in the past to investigate local geometry variations in DNA. An incorrect description of such geometries may also partially affect molecular dynamics (MD) simulations in applications when quantitative accuracy is required. The reference QM calculations have been carried out using the MP2 method extrapolated to the complete basis-set limit and corrected for higher-order electron-correlation contributions using CCSD(T) calculations with a medium-sized basis set. These reference calculations have been used as benchmark data to test the performance of the DFT-D, SCS(MI)-MP2, and DFTSAPT QM methods and of the AMBER molecular-mechanics (MM) force field. The QM methods show close to quantitative agreement with the reference data, albeit the DFT-D method tends to modestly exaggerate the repulsion of steric clashes. The force field in general also provides a good description of base stacking for the systems studied here. However, for geometries with close interatomic contacts and clashes, the repulsion effects are rather severely exaggerated. The discrepancy reported here should not affect the overall stability of MD simulations and qualitative applications of the force field. However, it may affect the description of subtle quantitative effects such as the local conformational variations in B-DNA. Preliminary calculations for two H-bonded uracil base pairs, including one with a C-H· · ·O H-bond, indicate excellent performance of the tested QM methods for all intermonomer distances. The force field, on the other hand, is less satisfactory, especially in the repulsive regions.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular Dynamics Simulation of Tri-n-Butyl-Phophate Liquid: A Force Field Comparative Study

Molecular dynamics (MD) simulations were conducted to compare the performance of four force fields in predicting thermophysical properties of tri-n-butyl-phosphate (TBP) in the liquid phase. The intramolecular force parameters used were from the Assisted Model Building with Energy Refinement (AMBER) force field model. The van der Waals parameters were based on either the AMBER or the Optimized Potential for Liquid Simulation (OPLS) force fields. The atomic partial charges were either assigned by performing quantum chemistry calculations or utilized previously published data, and were scaled to approximate the average experimental value of the electric dipole moment. Canonical ensemble computations based on the aforementioned parameters were performed near the atmospheric pressure and temperature to obtain the electric dipole moment, mass density, and self-diffusion coefficient. In addition, the microscopic structure of the liquid was characterized via pair correlation functions between selected atoms. It has been demonstrated that the electric dipole moment can be approximated within 1% of the average experimental value by virtue of scaled atomic partial charges. The liquid mass density can be predicted within 0.5-1% of its experimentally determined value when using the corresponding charge scaling. However, in all cases the predicted self- diffusion coefficient is significantly smaller than a commonly quoted experimental measurement; this result is qualified by the fact that the uncertainty of the experimental value was not available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Indicator Patterns of Forced Change Learned by an Artificial Neural Network

Abstract Many problems in climate science require the identification of signals obscured by both the “noise” of internal climate variability and differences across models. Following previous work, we train an artificial neural network (ANN) to predict the year of a given map of annual‐mean temperature (or precipitation) from forced climate model simulations. This prediction task requires the ANN to learn forced patterns of change amidst a background of climate noise and model differences. We then apply a neural network visualization technique (layerwise relevance propagation) to visualize the spatial patterns that lead the ANN to successfully predict the year. These spatial patterns thus serve as “reliable indicators” of the forced change. The architecture of the ANN is chosen such that these indicators vary in time, thus capturing the evolving nature of regional signals of change. Results are compared to those of more standard approaches like signal‐to‐noise ratios and multilinear regression in order to gain intuition about the reliable indicators identified by the ANN. We then apply an additional visualization tool (backward optimization) to highlight where disagreements in simulated and observed patterns of change are most important for the prediction of the year. This work demonstrates that ANNs and their visualization tools make a powerful pair for extracting climate patterns of forced change.

54 ENVIRONMENTAL SCIENCES↗

Revisiting Interior Water Mass Responses to Surface Forcing Changes and the Subsequent Effects on Overturning in the Southern Ocean

Abstract Two coupled climate models, differing primarily in horizontal resolution and treatment of mesoscale eddies, were used to assess the impact of perturbations in wind stress and Antarctic ice sheet (AIS) melting on the Southern Ocean meridional overturning circulation (SO MOC), which plays an important role in global climate regulation. The largest impact is found in the SO MOC lower limb, associated with the formation of Antarctic Bottom Water (AABW), which in both models is enhanced by wind and weakened by AIS meltwater perturbations. Even though both models under the AIS melting perturbation show similar AABW transport reductions of 4–5 Sv (50%–60%), the volume deflation of AABW south of 30°S is four times greater in the higher resolution simulation (−20 vs. −5 Sv). Water mass transformation (WMT) analysis reveals that surface‐forced dense water formation on the Antarctic shelf is absent in the higher resolution and reduced by half in the lower resolution model in response to the increased AIS melting. However, the decline of the AABW volume (and its inter‐model difference) far exceeds the surface‐forced WMT changes alone, which indicates that the divergent model responses arise from interactions between changes in surface forcing and interior mixing processes. This model divergence demonstrates an important source of uncertainty in climate modeling, and indicates that accurate shelf processes together with scenarios accounting for AIS melting are necessary for robust projections of the deep ocean's response to anthropogenic forcing.

54 ENVIRONMENTAL SCIENCES↗

Unsteady Land-Sea Breeze Circulations in the Presence of a Synoptic Pressure Forcing

Unsteady land-sea breezes (LSBs) that result from time-varying surface temperature contrasts Δθ(t) are explored in the presence of a constant synoptic pressure forcing, M g , oriented from sea to land (α = 0°) or land to sea (α = 180°). Large eddy simulations reveal the development of four distinctive regimes, depending on the joint interaction between M g , α, and Δθ(t) in modulating the fine-scale dynamics. Time lags, computed as the shifts that maximize correlation coefficients of the velocity between the unsteady and the corresponding steady scenarios at Δθ = Δθ max , are found to be significant and to extend 2 hr longer for α = 0° compared to α = 180°. These diurnal dynamics result in nonequilibrium conditions that are significantly affected by the flow history, and that behave differently over the two patches for the different α’s. Turbulence is found to be out of equilibrium with the mean flow, and the mean itself is found to be out of equilibrium with the thermal forcing. The sea surface heat flux is consistently more sensitive than its land counterpart to the time-varying external forcing Δθ(t), and more so for synoptic forcing from land to sea (α = 180°). Hence, although the land reaches equilibrium faster, the sea patch is found to exert a stronger control on the turbulence-mean flow equilibrium response. Finally, the vertical velocity profile at the shore and shore-normal velocity transects at the first grid level are shown to encode the multiscale regimes of the LSBs evolution and can thus be used to identify these regimes using k-means clustering.

58 GEOSCIENCES↗

Evolution and forcing mechanisms of El Niño over the past 21,000 years

The El Niño Southern Oscillation (ENSO) is Earth’s dominant source of interannual climate variability, but its response to global warming remains highly uncertain1. To improve our understanding of ENSO’s sensitivity to external climate forcing, it is paramount to determine its past behaviour by using palaeoclimate data and model simulations. Palaeoclimate records show that ENSO has varied considerably since the Last Glacial Maximum (21,000 years ago), and some data sets predict a gradual intensification of ENSO over the past ~6,000 years. Other attempts to simulate the transient evolution of ENSO have relied on simplified models or snapshot experiments. In this work, we assess a series of transient Coupled General Circulation Model simulations forced by changes in greenhouse gasses, orbital forcing, the meltwater discharge and the ice-sheet history throughout the past 21,000 years. Consistent with most palaeo-ENSO reconstructions, our model simulates an orbitally induced strengthening of ENSO during the Holocene epoch, which is caused by increasing positive ocean–atmosphere feedbacks. During the early deglaciation, ENSO characteristics change drastically in response to meltwater discharges and the resulting changes in the Atlantic Meridional Overturning Circulation and equatorial annual cycle. Increasing deglacial atmospheric CO 2 concentrations tend to weaken ENSO, whereas retreating glacial ice sheets intensify ENSO. The complex evolution of forcings and ENSO feedbacks and the uncertainties in the reconstruction further highlight the challenge and opportunity for constraining future ENSO responses.

54 ENVIRONMENTAL SCIENCES↗

Casimir Forces On A Silicon Micromechanical Chip

Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, so far the Casimir force has been experimentally observed only in situations involving an external object manually positioned close to a micromechanical element on a silicon chip. Here, we demonstrate the Casimir effect between two silicon components on the same substrate. In addition to providing an integrated and compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes on a single micromechanical chip.

Zou, J.↗

A joint role for forced and internally-driven variability in the decadal modulation of global warming

Despite the observed monotonic increase in greenhouse-gas concentrations, global mean temperature displays important decadal fluctuations typically attributed to both external forcing and internal variability. Here, we provide a robust quantification of the relative contributions of anthropogenic, natural, and internally-driven decadal variability of global mean sea surface temperature (GMSST) by using a unique dataset consisting of 30-member large initial-condition ensembles with five Earth System Models (ESM-LE). We present evidence that a large fraction (~29–53%) of the simulated decadal-scale variance in individual timeseries of GMSST over 1950–2010 is externally forced and largely linked to the representation of volcanic aerosols. Comparison with the future (2010–2070) period suggests that external forcing provides a source of additional decadal-scale variability in the historical period. Given the unpredictable nature of future volcanic aerosol forcing, it is suggested that a large portion of decadal GMSST variability might not be predictable.

54 ENVIRONMENTAL SCIENCES↗

Low cost and massively parallel force spectroscopy with fluid loading on a chip

Current approaches for single molecule force spectroscopy are typically constrained by low throughput and high instrumentation cost. Herein, a low-cost, high throughput technique is demonstrated using microfluidics for multiplexed mechanical manipulation of up to ~4000 individual molecules via molecular fluid loading on-a-chip (FLO-Chip). The FLO-Chip consists of serially connected microchannels with varying width, allowing for simultaneous testing at multiple loading rates. Molecular force measurements are demonstrated by dissociating Biotin-Streptavidin and Digoxigenin-AntiDigoxigenin interactions along with unzipping of double stranded DNA of varying sequence under different dynamic loading rates and solution conditions. Rupture force results under varying loading rates and solution conditions are in good agreement with prior studies, verifying a versatile approach for single molecule biophysics and molecular mechanobiology. FLO-Chip enables straightforward, rapid, low-cost, and portable mechanical testing of single molecules that can be implemented on a wide range of microscopes to broaden access and may enable new applications of molecular force spectroscopy.

42 ENGINEERING↗

Observation of electron orbital signatures of single atoms within metal-phthalocyanines using atomic force microscopy

Resolving the electronic structure of a single atom within a molecule is of fundamental importance for understanding and predicting chemical and physical properties of functional molecules such as molecular catalysts. However, the observation of the orbital signature of an individual atom is challenging. We report here the direct identification of two adjacent transition-metal atoms, Fe and Co, within phthalocyanine molecules using high-resolution noncontact atomic force microscopy (HR-AFM). HR-AFM imaging reveals that the Co atom is brighter and presents four distinct lobes on the horizontal plane whereas the Fe atom displays a “square” morphology. Pico-force spectroscopy measurements show a larger repulsion force of about 5 pN on the tip exerted by Co in comparison to Fe. Our combined experimental and theoretical results demonstrate that both the distinguishable features in AFM images and the variation in the measured forces arise from Co’s higher electron orbital occupation above the molecular plane. The ability to directly observe orbital signatures using HR-AFM should provide a promising approach to characterizing the electronic structure of an individual atom in a molecular species and to understand mechanisms of certain chemical reactions.

36 MATERIALS SCIENCE↗

Complexity of many-body interactions in transition metals via machine-learned force fields from the TM23 data set

Abstract This work examines challenges associated with the accuracy of machine-learned force fields (MLFFs) for bulk solid and liquid phases ofd-block elements. In exhaustive detail, we contrast the performance of force, energy, and stress predictions across the transition metals for two leading MLFF models: a kernel-based atomic cluster expansion method implemented using sparse Gaussian processes (FLARE), and an equivariant message-passing neural network (NequIP). Early transition metals present higher relative errors and are more difficult to learn relative to late platinum- and coinage-group elements, and this trend persists across model architectures. Trends in complexity of interatomic interactions for different metals are revealed via comparison of the performance of representations with different many-body order and angular resolution. Using arguments based on perturbation theory on the occupied and unoccupieddstates near the Fermi level, we determine that the large, sharpddensity of states both above and below the Fermi level in early transition metals leads to a more complex, harder-to-learn potential energy surface for these metals. Increasing the fictitious electronic temperature (smearing) modifies the angular sensitivity of forces and makes the early transition metal forces easier to learn. This work illustrates challenges in capturing intricate properties of metallic bonding with current leading MLFFs and provides a reference data set for transition metals, aimed at benchmarking the accuracy and improving the development of emerging machine-learned approximations.

Chemistry↗