Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLEETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Foothill Transit Agency Battery Electric Bus Progress Report, Data Period Focus: Jan. 2018 through Jun. 2018

This report summarizes results of a battery electric bus (BEB) evaluation at Foothill Transit, located in the San Gabriel Valley area of Los Angeles. Foothill Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service. The focus of this evaluation is to compare the performance and the operating costs of the BEBs to that of conventional technology buses and to track progress over time. Previous reports documented results from April 2014 through December 2017. This report extends the data analysis through June 2018. NREL plans to publish progress reports on the Foothill Transit fleet every six months through 2020. performance and the operating costs of the BEBs to that of conventional technology buses and to track progress over time. Previous reports documented results from April 2014 through December 2017. This report extends the data analysis through June 2018. NREL plans to publish progress reports on the Foothill Transit fleet every six months through 2020.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2015

Characterize Plug-In Electric Vehicle Driver Away-From-Home Parking Behavior in The EV Project

The EV Project deployed over 5,000 AC Level 2 charging stations and over 100 dual-port DC fast chargers for commercial use in 17 geographic regions across the united States. Approximately 8,300 Nissan LEAFs™ and Chevrolet Volts PEVs participated in The EV Project by allowing data to be collected characterizing operation of their PEV and their charging usage. In the San Diego region, final PEV enrollment included 681 Leafs and 272 Volt owners. The PEV charging stations deployed as part of The EV Project included both residential and non-residential sites. Non-residential sites included electric vehicle supply equipment (EVSE) installed in workplace environments, fleet applications and those that were publicly accessible near retail centers, parking lots, and similar locations. The EV Project utilized its Micro-Climate® planning process to determine potential sites for publicly accessible EVSE in San Diego. This process worked with local stakeholders to target EVSE deployment near areas where The EV Project residential participants resided and where significant PEV traffic was expected. Using this process, The EV Project installed 545 non-residential fleet, workplace, and publicly accessible EVSE at 164 locations in the San Diego region. Another report: “Do PEV Drivers Park near Publicly Accessible EVSE in San Diego but not use them?” 1 investigated the San Diego PEV drivers’ use of 139 of these publicly accessible EVSE locations. It examined how frequently drivers parked near publicly accessible EVSE locations, but did not use them for charging. It concluded that parking near EVSE installed by The EV Project accounted for 3% of vehicle away-from-home parking. This report looks in greater detail at the PEV parking locations in San Diego to determine if there are highly utilized parking locations that should have EVSE available.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2018

Developing a Strategy for Full Nuclear Plant Modernization

Recognizing the important role commercial nuclear power generation plays in the powering the economy and providing energy security to the nation, the U.S. Department of Energy (DOE) has established the Light Water Reactor Sustainability (LWRS) program to perform research and development (R&D) that further establishes the technical foundations for managing the long-term, safe, and economical operation of nuclear power plants (NPPs). One particular R&D area in the LWRS program is the Plant Modernization pathway, which includes human factors R&D and instrumentation and control systems engineering to enable full plant modernization. By funding R&D on plant modernization, the LWRS program provides important technical information that can be used by decision makers on how to best proceed with modernizing the existing fleet of NPPs. Under the LWRS program Plant Modernization pathway, a considerable amount of R&D has been performed in the human factors and I&C engineering areas. This work has been done in collaboration with many different U.S. utilities, and focused on both control room instrumentation and control (I&C) upgrades, and I&C upgrades in the field. The work performed to date under the LWRS program has had a notable impact on the ability for these utilities to continue to operate their respective fleets of reactors, and LWRS program researchers are intent on doing even more. In order to do this, a more unified strategy for full nuclear plant modernization needs to be developed. This report documents the latest step LWRS program researchers have taken to develop this strategy. Taken together with prior reports written on this specific topic the work described here provides an even clearer picture on what the strategy for full nuclear plant modernization should look like.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2018

The Case for All New City Buses in India to be Electric

Indian cities are struggling to keep the air breathable for inhabitants, due in part to emissions from diesel buses. While the case for electric buses, and more generally, zero emission buses, has always been clear from an urban air pollution perspective, the economic case depended strongly on their environmental benefits. However, the situation seems different today. We illustrate that when the benefits of recent dramatic declines in Lithium battery prices are fully realized, the total cost of ownership of urban (intra-city) electric buses is lower than that for diesel buses in India even without subsidies. Factoring in the air quality benefits, projected reductions in the cost of batteries and solar electricity, it becomes evident that transitioning to an all-electric bus fleet presents an enormous opportunity for India to reduce urban air pollution while improving the finances of urban bus transit agencies. The policy ecosystem that delivered substantial price reductions and large-scale rapid deployment of solar PV and LEDs is a model to achieve similar outcomes for battery electric buses. Well-designed high volume auctions and clear long term ambitious targets for fleet electrification could achieve to rapid electrification with little net public subsidy in the long-run.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2018

Strategy for Safety-Related Digital I&C Qualification

Digital I&C qualification continues to be a major impediment to addressing the reliability and obsolescence issues of the legacy analog I&C systems of the operating LWR fleet. In particular, the issue of digital common cause failure (CCF) has been difficult to address and has been the reason that some nuclear plant licensees have deferred upgrades of these critical plant systems and have rather opted to maintain them with considerable engineering and maintenance efforts. This is getting more and more difficult in the face of declining analog technology suppliers and dwindling supplies of spare parts and support for many critical components. To remain a viable energy source for the nation, the nuclear fleet must reduce its operating costs to a competitive level. Digital technology is the foremost means of implementing performance improvements and cost reductions for this purpose. This has been demonstrated over and over again in other industry sectors, as well as in conventional generation facilities. However, due to the special nature of nuclear energy, these digital I&C qualification barriers remain and must be resolved in order to modernize these plants and transform the business model to one that is competitive. The purpose of this report is to present an assessment of digital I&C qualification issues and address gaps in qualification methods and processes that would potentially benefit from Department of Energy (DOE)-sponsored research and development. Two new qualification methods are described that are recommended for further Department of Energy-sponsored research and development. They are 1) Testability – the exhaustive (100%) testing of certain digital devices addressing all combinations of inputs and internal states, and 2) Elimination of CCF triggers – ensuring that any latent digital defects are not concurrently triggered in redundant and back-up safety systems. In addition this report presents a strategy for full nuclear plant modernization based on four interrelated elements that together address the remaining barriers to prudent implementation. These four elements are 1) End-State Architecture, 2) Cost-Benefit Analysis, 3) Regulatory Approval, and 4) Implementation Sequence Plan.

42 ENGINEERING↗
DOE OSTI2018

Hydrogen Fuel-Cell Electric Hybrid Truck Demonstration (Final Technical Report)

The purpose of the project was to demonstrate three (3) fully developed, operational, advanced vehicle technology prototypes for ON-ROAD goods movement applications. The major vehicle OEM for this demonstration was Navistar International Trucks, with the fuel cell and power control hybrid technology provided and integrated by US Hybrid. CEM was to provide independent data collection and analysis, while EDF would provide education, outreach, and communication for the project. GTI managed the partnership and arranged for hydrogen fuel for the demonstration. The drayage truck is used to transfer the cargo container from/to ports in a warehouse or logistic yard. For port facilities in the Port of Houston Area, as well as virtually all other ports, drayage trucks often queue for long periods, inching along at slow speeds to await loading and unloading. During this process, the trucks are essentially idle, with conventional diesel engines continuously running and producing accompanying emissions. The ZECT would essentially power off during idle periods, or at least utilize minimal electric energy. As such, range limitation by using a gaseous fuel would be mitigated by the fact that the vehicle is not using fuel during much of its duty cycle. The project team expected the vehicle range to be about 200 miles which is well within the duty cycle requirements of the original fleet partner, Richardson Trucking. The project was intended to demonstrate commercialization and production potential, and to clearly illustrate the selected vehicle technology’s potential to reduce GHG emissions and petroleum use if implemented widely. To achieve this, the project team proposed a two-year demonstration project in the Port of Houston area to assess and track vehicle performance, and evaluate fuel savings, petroleum reduction, and emissions reduction benefits of the prototype technology. Additional time at the front end of the project was required for vehicle and support infrastructure preparation. In June 2017 the remaining project partners, which now included Air Liquide, agreed that the project would be unlikely to move forward with the vehicle demonstration, primarily due to the lack of a viable cargo truck fleet partner in the Port of Houston area willing to make a sufficient commitment of resources to operate the vehicles for the demonstration.

08 HYDROGEN↗
DOE OSTI2019

Meeting 2025 Zero Emission Vehicle Goals: An Assessment of Electric Vehicle Charging Infrastructure in Maryland

The National Renewable Energy Laboratory (NREL) has been enlisted to conduct a statewide assessment of the electric vehicle charging infrastructure requirements for Maryland to meet its goal of supporting 300,000 zero emission vehicles by 2025. NREL's Electric Vehicle Infrastructure Projection Tool (EVI-Pro) was used to generate scenarios of statewide charging infrastructure to support consumer plug-in electric vehicle (PEV) adoption based on travel patterns provided by INRIX (a commercial mapping/traffic company) that are used to characterize regional travel in Maryland and to anticipate future demand for PEV charging. Results indicate that significant expansion of Maryland's electric vehicle charging infrastructure will be required to support the state's PEV goal for 2025. Analysis shows that a fleet of 300,000 PEVs will require 17,400 workplace Level 2 plugs, 9,300 public Level 2 plugs, and 1,000 fast charge plugs. These estimates assume that future PEVs will be driven in a manner consistent with present day gasoline vehicles and that most charging will happen at residential locations. A sensitivity study explores edge cases pertaining to several assumptions, highlighting factors that heavily influence the projected infrastructure requirements. Variations in the makeup of the PEV fleet, evolving consumer charging preferences, and availability of residential charging are all shown to influence 2025 infrastructure requirements.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Development of Accident Tolerant Fuel Options For Near Term Applications

In this section, the basis for the proposal followed by description of the work scope and methodologies are discussed. Following the Fukushima disaster in 2011, US congress mandated the department of energy to start a R&D program on accident tolerant fuel (ATF) concepts for the existing light water reactor fleet. By 2015, the start date of this IRP, several ATF concepts were being pursued by various entities. In general, the ATF concepts were divided into two categories: near term and long term. The near term concepts included: Coated Zircaloy clad, fuels with additives and dopants and FeCrAl/steel based claddings. The long term concepts included: SiC composite cladding, high density fuels (U 3 Si 2 , UN) and TRISO type fuel forms (e.g. FCM). It is of particular importance for any DOE funded effort to give background information and original Funding Opportunity Announcement (FOA) goals in its final report to evaluate whether the FOA goals and the proposed work were actually addressed. The FOA for this IRP sought for modeling and simulation capability to predict various ATF performances during normal operation, design basis accident and severe accident conditions. Particularly, the FOA was concern with the state of the core performance during a severe accident. It was postulated that if an ATF retains its structural integrity, the performance of non-fuel structures in the core needs to be addressed. The IRP team focused the proposal on Pressurized Water Reactor (PWR) performance for near term ATF concepts: Coated cladding, Fuel with additives and dopants to accelerate adoption of such concepts and address the unanswered questions regarding their performance. The project also gave limited focus on another near term concept, FeCrAl cladding, by restricting its scope to time-to-failure prediction since substantial effort supported by other programs including ORNL ATF program, GEH ATF program and NEAMS High Impact Problem were already made or underway during the IRP tenure. Despite two previous IRPs funded in 2012 with focus on experimental study of metallic and ceramic Zircaloy coated claddings, this IRP still included a coating program. This was a testament to the project leadership’s belief that the coated clad concept will be the primarily initial pathway for near term industrialization of ATF technology due to presence of enrichment penalty and licensing hurdles of the alternative clad concepts. In doing so, the IRP was positioned to provide key findings on coated Zircaloy as a uniquely funded external program to DOE’s industrial ATF campaign. Currently, in 2019, the coated clad concept is being pursued by all three vendors for licensed application and Lead Test Rods and Lead Test Assemblies (LTRs/LTAs) have already been inserted or planned to be inserted in the existing fleet. At the start of the IRP project, based on the meeting with the projects technical and federal point of contacts, it was also agreed upon if the contractual obligations are met, then the scope of the simulation work will be extended to Boiling Water Reactors as included in Section 2.10.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Optimization of Zero Emission Hydrogen Fuel Cell Ferry Design, With Comparisons to the SF-BREEZE

Zero emission hydrogen fuel cell technology has the potential to drastically reduce total “well-to-waves” maritime emissions. Through realistic design studies of five commercially-relevant passenger vessels, this study examines the most cost-effective entry points in the US fleet for deploying today’s available technology, and includes analysis of resulting well-to-waves emission profiles. The results show that per-passenger mile vessel energy use is directly correlated to increased emissions, capital costs, and operating costs. As a consequence, low speed, large capacity vessels offer a cost-effective starting place today. Increases in vessel efficiency through such measures as hull design and light-weighting can have large impacts in reducing cost and emissions of these systems. Overall this work showed all five vessel types to be feasible with today’s hydrogen fuel cell technology and presents more options to fleets that are committed to reducing maritime emissions in cost effective ways.

08 HYDROGEN↗
DOE OSTI2018

2017 Hydropower Market Report

The U.S. hydropower fleet represents 7% of total electricity generation installed capacity (as of the end of 2016) and produces 6.3% of electricity (2014-2016 average). In addition, 43 pumped storage hydropower (PSH) plants with a total capacity of 21.6 GW provide 95% of utility-scale electrical energy storage in the United States. The U.S. fleet is the third largest in the world for both hydropower and PSH.

13 HYDRO ENERGY↗
DOE OSTI2019

Method and application of data integration at a nuclear power plant. Light Water Reactor Sustainability Program report

The data of a nuclear power plant (NPP) is stored in silos for the various plant tools. A previous study conducted by the LWRS program identified the different data sources that can benefit online monitoring in an NPP. These data have different structures and tools and are therefore used independently. Integrating data from various sources can result in multiple benefits to online monitoring by enhancing the ability to compare data, reduce statistical uncertainty due to a larger data set, increase data heterogeneity in space and time to reveal confounded information, develop intelligent methods, and share data. Data integration can result in direct cost saving by reducing the amount of effort needed to find needed information. It can also enable establishing a data warehouse, the backbone repository of data for an NPP, and is necessary to evolve NPPs to a holistic online monitoring approach and automate labor-intensive activities. Whether within an NPP or for a fleet of NPPs, deploying a data warehouse in a plant or data broker for a fleet of plants requires overcoming multiple challenges, including the lack of a standard form of storing and using data and the lack of integration methods to compare and map the different data sources. This effort demonstrates two methods and applications for data integration through an application integration pilot and a data fusion pilot. The application integration is targeted towards the software interfacing of data and data management. This approach is commonly used by data integrators. The data fusion pilot is targeted towards intelligently mapping or coupling data for optimized data use. The pilots were performed in collaboration with two NPPs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Vehicle Cybersecurity Threats and Mitigation Approaches

Federal fleet managers and the information technology teams working with them need to understand the threats associated with modern vehicles. As vehicles become safer overall, the dangers change from distracted drivers to privacy intrusion and compromised operation. While fleet managers cannot necessarily change the configurations of manufacturer settings in mass market vehicles, they can influence what protective measures are taken in supplemental equipment or pilot-project vehicles. This report identifies security concerns, mitigation techniques, and procurement language that may be applicable in certain cases.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Load Flexibility Analysis of Residential HVAC and Water Heating and Commercial Refrigeration

The emergence of connected devices and the Internet of Things has opened the door to the concept of widespread use of building equipment for load-side flexibility. This stems from the increased use of distributed and clean energy resources for electric generation and the growing demand for a more resilient and reliable grid. A significant challenge associated with the use of building equipment as a distributed energy resource is quantifying the magnitude of power or energy flexibility. Unlike batteries that have well-defined and relatively constant capacity and maximum charge/discharge rates, building equipment often has characteristics that vary based on external factors (e.g., weather or occupant behavior). This makes quantifying the availability and flexibility of these resources difficult. Controlling a fleet of equipment while minimizing any adverse impacts to the occupants (e.g., discomfort or food spoilage) is a nontrivial matter. Although there are many different control methodologies available, this study focuses on two: priority-based control (PBC) and model-predictive control (MPC). These were selected because they represent two ends of the control spectrum. PBC is a relatively simple control strategy that requires only the current state of the devices to be controlled and an estimate of how much power each device consumes when turned on. MPC is much more complex and requires a model of the system and forecasts of any disturbances that influence the system. Because MPC has a predictive element, it can prepare for a desired response before the event and therefore is expected to provide a more optimal control relative to PBC. Both MPC and PBC are compared with a baseline simulation that uses feedback control typical of the thermostatically controlled devices being evaluated. This report investigates the load flexibility of three building systems: residential air conditioners, residential water heaters, and commercial refrigeration. Air heating and cooling and water heating account for 45% of residential electricity use, making them good candidates for providing load flexibility. Refrigeration in commercial buildings accounts for 16% of commercial building electricity use, making it another good candidate. Simplified models of each system were generated and validated based on measured data from actual equipment. These models were used to simulate the thermal and power response of the systems using PBC and MPC for a fleet of devices trying to achieve a variety of different responses, including hourly load shed, hourly load up, and daily peak demand reduction. Significant findings from each piece of equipment follow.

42 ENGINEERING↗
DOE OSTI2019

Characterization of Medium- and Heavy-Duty Vehicle Operations from In-Use Data: An Analysis of Starts, Soak Time, and Warm-Up Duration

In recent years, advanced technologies for emission control have developed so significantly that exhaust emissions from hot-stabilized operation can be reduced to almost zero. Thereby, the emissions from cold operations contribute the most significant portion of the total emissions from a trip. As such, the Manufacturers of Emissions Controls Association (MECA) was interested in conducting a quantitative assessment of the engine cold-start operations for medium- and heavy-duty vehicles, using real-world operational data. In addition to providing valuable information to MECA, this study will also be valuable to engine manufacturers for developing more specific emission control technology strategies targeted on engine cold-start performance, fleet managers for determining more suitable driving cycles for their fleets to further reduce fuel cost and engine emissions and policymakers for gaining a better understanding of the real-world emissions impacts from cold-start operations.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

R&D Insights for Extreme Fast Charging of Medium- and Heavy-Duty Vehicles: Insights from the NREL Commercial Vehicles and Extreme Fast Charging Research Needs Workshop, August 27-28, 2019

As battery costs have declined and battery performance has improved, the applicability of vehicle electrification has expanded beyond passenger cars to the commercial vehicle sector. However, due to the larger batteries that would be needed for the medium- and heavy-duty (MDHD) sector, the electric charging capabilities to serve these larger commercial vehicles will need to be substantially more powerful than light-duty chargers. More specifically, such 'extreme fast charging' (XFC) will likely need to reach the megawatt scale to provide a full charge in less than 30 minutes in some applications. In addition, the combined cost of electrified vehicles and charging must be competitive with the costs of petroleum-based technologies and other alternatives to encourage widespread adoption of battery electric vehicles (BEVs) among MDHD fleets. Most of these fleets have a commercial mission and demand low total cost of ownership (TCO) (which motivates minimal refueling times) and high performance from their vehicles.

25 ENERGY STORAGE↗
DOE OSTI2019

Key Regulatory Issues in Nuclear Micro-Reactor Transport and Siting

Inherent and passively safe nuclear micro reactors are being developed that feature mobility and autonomous operations much different than the current fleet. Numerous commercial, industrial, and military applications exist for this emerging technology. Challenges in licensing such flexible systems are foreseen, especially in areas related to siting and transport. New assessment approaches will be needed if micro reactors are to realize their full commercial potential while still preserving public safety. This report offers an initial examination of some key regulatory concerns related to micro reactor transport and siting in the continental U.S. Three deployment scenarios were developed to support a regulatory needs analysis concerning the appropriate regulatory structure for the technology, treatment of fueled and unfueled micro reactor modules during transport, and the means by which siting independence can be enhanced. With the exception of certain ultra mobile Department of Defense (DOD) applications, existing statutes suggest the Nuclear Regulatory Commission (NRC) is the appropriate regulatory agency to regulate a domestic commercial micro reactor fleet.

42 ENGINEERING↗
DOE OSTI2019

Vehicle Technologies and Fuel Cell Technologies Office Research and Development Programs: Prospective Benefits Assessment for Medium- and Heavy-duty Vehicles

Through a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies Offices of the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) invest in early-stage vehicle and fuel cell research. The Vehicle Technologies Office (VTO) and the Fuel Cell Technologies Office (FCTO) are two offices that are encompassed within EERE’s Sustainable Transportation pillar. VTO conducts research and development (R&D) to provide low-cost, reliable, and efficient energy for the transportation of goods and people across America. FCTO has a comprehensive portfolio of activities that address the barriers facing the development and implementation of hydrogen and fuel cells, with the ultimate goals of decreasing our dependence on oil, reducing greenhouse gas (GHG) emissions, and enabling clean, reliable power generation through both transportation and stationary uses of hydrogen. This report quantifies the vehicle-level and national-level benefits of successful VTO and FCTO R&D applied to medium- and heavy-duty vehicles. The benefits estimated include reductions in energy use and GHG emissions from and changes in expenditures on medium- and heavy-duty vehicles on the road in the United States through the year 2050. The potential future benefits of successfully developing and implementing these technologies were analyzed by comparing a “Program Success” case to a base case (the “No Program” case). The Program Success case represents the future with successful implementation of VTO and FCTO technologies. The No Program case represents a future in which VTO or FCTO do not contribute to these technologies after Fiscal Year (FY) 2019. Three side cases were analyzed to assess the sensitivity of the projections of market adoption to future electricity prices (including infrastructure costs), the availability of electricity and hydrogen at public stations, and fuel cell system efficiency. Advanced vehicle technologies supported by VTO and FCTO programs can greatly increase the fuel economy of medium- and heavy-duty vehicles. As a result of EERE-supported technologies, the sales-weighted average fuel economy of the fleet of all new Class 7 and 8 trucks in the Program Success case is projected to be 1.2 times that of the trucks in the No Program case in 2035 and 1.3 times the baseline in 2050. These technologies in Classes 4–6 increase fuel economy by a factor of 1.46 in 2035 and 1.78 in 2050. The fuel economy of the entire on-road medium- and heavy-duty vehicle fleet, including all fuel types, is projected to be higher by 10%, reaching 9.1 mpgde in 2035, and by 25%, reaching 11.0 mpgde in 2050. The resulting petroleum savings in 2050 were estimated to be 0.75 million barrels per day, and reductions in GHG emissions in 2050 were estimated to 110 million metric tons of carbon dioxide equivalent (CO 2 -eq) per year. Such petroleum reductions result in significant reductions in fuel expenditure for medium- and heavy-duty vehicles, totaling approximately $37 billion annually by 2035. Figure ES-1 shows the difference in projected consumption of diesel fuel, electricity, and hydrogen in the No Program and Program Success cases. Negative values show the reduction in the Program Success case, relative to the No Program case.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Long Beach Transit Battery Electric Bus Evaluation (Final Report)

Beginning in March 2017, Long Beach Transit began operating a fleet of 10 battery electric buses (BEBs) in its service area in Southern California. These electric buses, produced by BYD, are 40-foot buses that are typically charged overnight. Long Beach Transit is collaborating with the California Air Resources Board (CARB) and the U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service. NREL evaluated the first year of Long Beach Transit’s BEB fleet under Federal Transit Administration funding and published a report covering results from January 2018 through December 2018. CARB provided funding to cover a second year of evaluation. This report provides an update to the previous reports and is focused on the second year of operation from January 2019 through December 2019. Data are provided on a selection of compressed natural gas (CNG) buses as a baseline comparison.

33 ADVANCED PROPULSION SYSTEMS↗