Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718

Electron beam melting (EBM) of Alloy 718 is of rapidly growing interest as it allows cost-effective production of complex components. However, the inherent flaws in the component in as-built state are of concern in view of the severe working conditions in which Alloy 718 components typically operate. The present work entails an investigation of changes in microstructure that accompany some post-treatments that are being widely considered to address defects in EBM processed Alloy 718. The effect of two different post-treatments, namely hot isostatic pressing (HIP) and a combined HIP + heat treatment (HT) carried out inside the HIP vessel, have been studied and results from as-built and post-treated specimens were compared in terms of porosity/lack-of-fusion, microstructure, phase constitution (NbC content, δ-phase) and micro-hardness. Post-treatment resulted in reduction in defect content by more than an order of magnitude. HIPing led to complete dissolution of δ phase. In comparison to as-built material, HIPed specimens exhibited significant drop in hardness. However, a sharp ‘recovery’ of hardness to yield values higher than in as-built condition was observed after HIP + HT and can be attributed to precipitation of γ′′ phase.

36 MATERIALS SCIENCE↗

Interaction of Guided Waves with Delamination in a Bilayered Aluminum-Composite Pressure Vessel

Composite structures are likely affected by barely visible or not visible damages including delaminations, disbondings or detachments among several parts connected together to obtain the whole structure. Pressure vessels adopted for space application represent a significant case. They are designed with a metal to composite hybrid configuration. The harsh and unpredictable missions may threaten the connection between different materials inducing hidden damage. Guided ultrasonic waves are investigated in this work in view of detection and assessment of small emerging flaws at the interface level. Experimental and numerical approaches are used to predict the propagation behavior of the first antisymmetric (A{sub 0}) Lamb wave mode. That is complicated by the interaction with the connected area, the multimodal behavior and the interaction with damage when present. However, the work demonstrates that simplified models can be used to investigate the wave field accurately with a fewer computational effort possible. Finally, theoretical considerations and numerical outcomes are used in combination to reveal the interaction phenomena and demonstrate the detection capability of A{sub 0} mode for a possible damage index approach.

36 MATERIALS SCIENCE↗

Quality Control of Additively Manufactured Metallic Structures with Machine Learning of Thermography Images

Additive manufacturing (AM) of high-strength metals is currently based on the laser powder bed fusion (LPBF) process, which can introduce internal material flaws, such as pores and anisotropy. Quality control (QC) requires nondestructive evaluation of actual AM structures. Flash thermography is a potentially promising QC technique because it is scalable to arbitrary structure size. However, the detection sensitivity of this method is limited by noise. We investigate separation of signal from noise in thermography images using several machine learning (ML) methods, including new spatial–temporal blind source separation and spatial–temporal sparse dictionary learning methods. Performance of the ML methods is benchmarked using thermography data obtained from imaging stainless steel 316L and Inconel 718 specimens produced by the LPBF method with imprinted calibrated porosity defects. The ML methods are ranked by F-score and execution runtime. Finally, the ML methods with higher accuracy require a longer runtime. However, this runtime is sufficiently short to perform QC within a realistic time frame.

36 MATERIALS SCIENCE↗

Computer Model Calibration Based on Image Warping Metrics: An Application for Sea Ice Deformation

Arctic sea ice plays an important role in the global climate. Sea ice models governed by physical equations have been used to simulate the state of the ice including characteristics such as ice thickness, concentration, and motion. More recent models also attempt to capture features such as fractures or leads in the ice. These simulated features can be partially misaligned or misshapen when compared to observational data, whether due to numerical approximation or incomplete physics. In order to make realistic forecasts and improve understanding of the underlying processes, it is necessary to calibrate the numerical model to field data. Traditional calibration methods based on generalized least-square metrics are flawed for linear features such as sea ice cracks. We develop a statistical emulation and calibration framework that accounts for feature misalignment and misshapenness, which involves optimally aligning model output with observed features using cutting-edge image registration techniques. Here, this work can also have application to other physical models which produce coherent structures.

54 ENVIRONMENTAL SCIENCES↗

Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites

Metal-ceramic nanolaminate composites show promise as high strength and toughness materials. Micropillar compression was used to characterize the mechanical behavior of AlSiC multilayers in different orientations including loading at 0°, 45° and 90° with respect to the direction of the layers. The 0° orientation showed the highest strength while the 45° orientation showed the lowest strength. Each orientation showed unique deformation behavior. Effects of pillar size and aspect ratio were also studied. Higher compressive strengths were observed in smaller pillars for all orientations. This effect was shown to be due to a lower probability of flaws using Weibull statistics. Additionally, changes in the aspect ratio was shown to have no significant effect on the behavior except an increase in the strain to failure in the 0° orientation. In conclusion, finite element analysis (FEA) was used to simulate and understand the effect of these parameters on the deformation behavior.

36 MATERIALS SCIENCE↗

Efficient sensitivity analysis of the thermal profile in powder bed fusion of metals using hypercomplex automatic differentiation finite element method

Rapid cyclic temperature fluctuation occurring in powder bed fusion of metals using a laser beam (PBF-LB/M) influences the formation of flaws in printed parts. Consequently, there is a pressing need to enhance the quality of printed parts by developing innovative methodologies that can predict thermal histories and help uncover the intricate relationships between process parameters and thermal profiles. Sensitivity Analysis (SA) emerges as an essential tool for this, offering the potential for process optimization and enhanced quality control. Nonetheless, conventional SA methodologies often incur in excessive computational costs and potential numerical approximation errors. Here, to address this technical challenge, we present a novel method for SA that integrates the HYPercomplex-based Automatic Differentiation (HYPAD) technique with transient thermal simulations conducted via the finite element method (FEM). Leveraging this methodology, we efficiently and accurately perform SA for PBF-LB/M processes in a post-processing step. Compared to traditional methods like Finite Differences (FD), HYPAD-FEM required 96 % less computational time for obtaining sensitivities for 22 process parameters, under a comparative study conducted within the context of the 2018–02 AM benchmark of the National Institute of Standards and Technology. In summary, HYPAD-FEM offers superior efficiency and accuracy in SA over conventional methods, delivering the best sensitivity of a model without the need for step-size selection and problem or parameter-based implementations.

36 MATERIALS SCIENCE↗

The 't Hooft vertex revisited

In 1976 't Hooft introduced an elegant approach towards understanding the physical consequences of the topological structures that appear in non-Abelian gauge theories. These effects are concisely summarized in terms of an effective multi-fermion interaction. These old arguments provide a link between a variety of recent and sometimes controversial ideas including discrete chiral symmetries appearing in some models for unification, ambiguities in the definition of quark masses, and flaws with some simulation algorithms in lattice gauge theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Revisiting numerical real-space renormalization group for quantum lattice systems

Highlights: •A regularized scheme of the NRG algorithm is proposed. •The method overcomes the boundary obstacle in applying the NRG to quantum lattices. •Extension of the scheme to 2D lattices is illustrated. •Benchmark test on the Heisenberg antiferromagnet demonstrates its numerical validity. -- Abstract: Although substantial progress has been achieved in solving quantum impurity problems, the numerical renormalization group (NRG) method generally performs poorly when applied to quantum lattice systems in a real-space blocking form. The approach was thought to be unpromising for most lattice systems owing to its flaw in dealing with the boundaries of the block. Here the discovery of intrinsic prescriptions to cure interblock interactions is proposed which is able to clear up the boundary obstacle in applying the NRG to quantum lattice systems. While the resulting RG transformation turns out to be strict in the thermodynamic limit, benchmark tests of the algorithm on a one-dimensional Heisenberg antiferromagnet and a two-dimensional tight-binding model demonstrate its numerical efficiency in resolving low-energy spectra for finite lattice systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CFD modeling of natural circulation in LiCl-KCl molten salt closed loop

Characterizing flow within a molten salt closed-loop system is crucial for assessing system requirements, evaluating performance, and identifying potential flaws. Direct flow measurement using instrumentation is challenging due to extreme environmental conditions and the limitations associated with measuring molten salt flow under natural convection. Here, this study aims to provide comprehensive insights into the thermal-hydraulic behavior of a closed loop, with a particular focus on temperature distribution and velocity prediction. The Computational Fluid Dynamics (CFD) model demonstrated the capability to effectively simulate and predict both temperature distributions and flow velocities within the molten salt loop. The CFD model's predictive capability was validated by its ability to replicate temperature measurements under varying boundary conditions. The analysis revealed that the CFD model tends to underpredict temperatures in the cold leg and overpredict them in the hot leg, highlighting the need for continuous model refinement and acknowledging the limitations of using a steady-state approach. Furthermore, the potential of using external temperature measurements to estimate internal molten salt temperatures and predict flow velocity was explored, revealing that this approach could introduce up to a 5.5% error in flow velocity calculations. Line probes mapping temperature distributions across the tube's cross-section and molten salt provided valuable insights into temperature gradients, emphasizing the need for a thermal conductivity equation for molten salt with lower uncertainty to achieve more accurate temperature predictions of the system.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Atomistic modeling of tensile deformation and fracture of carbon fibers: Nanoscale stress redistribution, effect of local structural characteristics and nanovoids

The mechanisms of tensile deformation and fracture of carbon fibers are investigated in large-scale molecular dynamics simulations. The simulations performed for computational samples with different structural characteristics enable analysis of the structural sensitivity of the mechanical properties. It is found that the carbon fiber nanostructure can be represented by a fine (nanoscale) mixture of stiff and soft regions. Despite the nanoscale structural heterogeneity of the computational fibers, their fracture strain and tensile strength exceed the experimental values by almost an order of magnitude. Here, this observation is explained by the ability of the carbon fiber nanostructure, largely consisting of curved and folded layers of turbostratic carbon, to exhibit continuous nanoscale load redistribution during the deformation. The transient, fluid nature of a percolating cluster of stress-holding structural elements prevents stress localization at the early stage of the deformation and enables the fiber nanostructure to adapt to the increasing load. Overall, the results of the simulations suggest that the design of advanced carbon fiber manufacturing and post-processing methods focused on the elimination of critical mesoscopic structural defects (internal voids, foreign inclusions, and surface flaws) can yield a substantial increase in the strength and fracture strain of carbon fibers.

36 MATERIALS SCIENCE↗

Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)

Traditional PVA fiber-reinforced Engineered Cementitious Composites (ECC) show high tensile ductility and superior durability with tight crack width, but the high cost and embodied carbon can hinder its wider application in infrastructures. The objective of this study is to develop a better understanding of the fresh and hardened properties of an ECC that employs a lower embodied-carbon binder, Limestone Calcined Clay Cement (LC3), and lower-cost PP fiber that is widely available. Specifically, the interrelations between material processing, microstructure, and composite properties were studied experimentally. The results showed that ECC with high tensile ductility up to 9% tensile strain and tight crack width with 50 μm at 2% tensile strain can be achieved. It was found that a matrix paste with higher viscosity generally enhanced fiber dispersion uniformity and robustness in tensile strain-hardening. The paste viscosity is increased when OPC is replaced by LC3 and can be tuned with superplasticizer content. Larger maximum flaw size leads to lower first crack strength, beneficial for microcrack initiation and multiple cracking. This study generates fundamental knowledge linking processing-microstructure-performance of PP-LC3-ECC. This class of low embodied carbon ECC with tight crack width is expected to contribute to reducing the carbon footprint of the built environment.

36 MATERIALS SCIENCE↗

Biaxial Flexural Strength of Poled Lead Zirconate Titanate under High Electric Field with Extended Field Range

In the present work, as-received poled lead zirconate titanate, or PZT 5A, was examined using ball-on-ring (BoR) mechanical testing coupled with an electric field. Electric fields in the range of 4Ec (Ec, coercive field) with controlled loading paths were applied, and mechanical tests at a substantial number of characteristic electric field levels were conducted. Commercial electronic liquid FC-40 was used to prevent the setup from dielectric breakdown under a high electric field. Weibull strength distribution was used to interpret the mechanical strength data. The data showed that the strength levels of the PZT-5A tested under OC (open circuit) in air and in FC-40 were almost the same. It was further revealed that , for the studied cases, the effect of loading history on the biaxial flexural strength of the PZT was significant in -Ec, but not in OC or zero field as well as 4Ec . An asymmetry V curve was observed for the characteristic strength-electric field graph, and the bottom of V curve was located near the negative coercive field. Microscopy analysis showed that surface-located volume-distributed flaws were the strength limiter and responsible for the failure of the tested PZT under electromechanical loadings.

Zhang, Kewei↗

Investigation of temperature approximation methods during flash sintering of ZnO

The lattice expansion in ZnO, using in-situ X ray diffraction, has been investigated during flash sintering with varying current densities. While current flow through the specimen enhances the kinetics of sintering for ZnO, the temperature is not high enough to claim thermal runaway or localized melting. Unlike the case of yttria stabilized zirconia [1,2], experimental temperature approximations predict comparable specimen temperature to conventional sintering temperature of ZnO. Microstructural analysis supports the findings of the in-situ temperature approximations. In comparison with black body radiation, a gap between theoretical value and measured value was found due to flaws in the theoretical model. In addition, a new type of flash sintering was introduced, with current ramp, to avoid the power spike which has been the source of much debate about the transition from voltage to current control. In conclusion, the advantage of this method is in the controlled sintering kinetics thus avoiding the channeling found in dielectric materials [3].

36 MATERIALS SCIENCE↗

A mixed-mode phase field fracture model in anisotropic rocks with consistent kinematics

Under a pure tensile loading, cracks in brittle, isotropic, and homogeneous materials often propagate such that pure mode I kinematics are maintained at the crack tip. However, experiments performed on geo-materials, such as sedimentary rock, shale, mudstone, concrete and gypsum, often lead to the conclusion that the mode I and mode II critical fracture energies/surface energy release rates are distinctive. This distinction has great influence on the formation and propagation of wing cracks and secondary cracks from pre-existing flaws under a combination of shear and tensile or shear and compressive loadings. To capture the mixed-mode fracture propagation, a mixed-mode I/II fracture model that employs multiple critical energy release rates based on Shen and Stephansson, IJRMMS, 1993 is reformulated in a regularized phase field fracture framework. Here we obtain the mixed-mode driving force of the damage phase field by balancing the microforce. Meanwhile, the crack propagation direction and the corresponding kinematics modes are determined via a local fracture dissipation maximization problem. Several numerical examples that demonstrate mode II and mixed-mode crack propagation in brittle materials are presented. Possible extensions of the model capturing degradation related to shear/compressive damage, as commonly observed in sub-surface applications and triaxial compression tests, are also discussed.

42 ENGINEERING↗

Simulators for quantum network modeling: A comprehensive review

Quantum network research is exploring new networking protocols, physics-based hardware and novel experiments to demonstrate how quantum distribution will work over large distances. Current work explores much of these concepts in simulations, that are developed to understand how quantum networking will be set up and researchers can experiment virtually. Exposing flaws in network designs, like unsustainable topologies, or develop protocols that efficiently utilize network resources, simulators can also help assess whether workloads are balanced across virtual machines in the network. However, much of these simulation models come without reliable verification methods, for testing performance in real deployments. Here, in this paper, we present a review of, to the best of our knowledge, currently used toolkits for modeling quantum networks. With these toolkits and standardized validation techniques, we can lay down the foundations for more accurate and reliable quantum network simulators.

97 MATHEMATICS AND COMPUTING↗

An Optimal Density Functional Theory Method for GaN and ZnO

We report an optimal DFT method (bBLYP) for studying the GaN and ZnO systems. It is developed by modifying the exchange functional in the hybrid BLYP method in order to overcome the flaw of traditional DFT that often predict a rather small band gap for those semiconductors. Results show that the bBLYP method can describe not only correct band gaps of both GaN and ZnO wurtzite crystals, but also accurate properties of relevant small molecules. The application study of crystal-cut nanoparticles and nanowires reveals a new mechanism for band gap narrowing in GaN/ZnO.

74 ATOMIC AND MOLECULAR PHYSICS↗

An Accelerated Testing and Analysis Framework for Qualification of Battery Materials

The continuously growing demand for batteries used within automotive, aviation, and grid applications has exacerbated the need to supplement critical battery material feedstocks, such as those for anode and cathode active materials. New or supplementary material sources, however, universally comprise unique material properties that can significantly affect the lifetime and performance of resultant batteries. As such, the influence of composition, microstructure, and morphology on electrochemical performance should be characterized quickly and accurately to accelerate commercialization of new material sources. This work introduces a tiered framework to quickly assess new material viability and understand the influence of physicochemical properties on battery performance. The Tier 1 testing described here is rapid and lower-effort to quickly recognize materials with fundamental flaws and potentially disqualify them. Later testing would require more time and effort but provide higher fidelity information with a goal of validating materials for specific applications. A case study examining various commercial sources of LiFePO4 (LFP) is presented, using Tier 1 of the protocol to identify rapid electrochemical and physicochemical signals that correlate with performance and to provide early go/no-go decisions on LFP materials without the need for long-term cycling data.

25 - ENERGY STORAGE↗

The Geocybernetic Assessment Matrix (GAM) — A new assessment tool for evaluating the level and nature of sustainability or unsustainability

Evaluating sustainability from EIA-based assessments has been problematic at best. This is due to the use of reductionist and qualitative approaches which is dependent upon the perspective of the assessor(s). Therefore, a more rigorous and holistic approach is required to evaluate sustainability in a more consistent way. In this paper, a matrix-based methodology in order to assess the indicated level and nature of sustainability for any project, policy, indicators, legislation, regulation, or other framework is described. The Geocybernetic Assessment Matrix (GAM) is designed to evaluate the level and nature of sustainability or unsustainability occurring in respect the fundamental and complex geocybernetic paradigms. The GAM method is described in detail in respect to the theory behind it and the methodology. The GAM is then demonstrated using an appropriate case study — Part 1 of the UK Climate Change Act (2008) concerning carbon budgets and targets. The results indicate that the Part 1 of Act may not achieve the desired goals in contributing towards sustainable development through the stated mechanisms for carbon budgets and targets. The paper then discusses the broader context of the GAM with respect to the core themes evident in the development and application of the GAM of: sustainability science; sustainability assessment; application value of the GAM; and future research and development. - Highlights: • A new assessment tool called the Geocybernetic Assessment Matrix (GAM) described. • GAM evaluates the level and nature of sustainability or unsustainability. • GAM demonstrated by application to Part 1 of the UK Climate Change Act (CCA). • Part 1 of CCA has significant flaws in achieving a sustainable pathway. • GAM offers a potentially useful tool for quantitatively evaluating sustainability.

54 ENVIRONMENTAL SCIENCES↗