SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Enthalpies of formation from oxides (Δ H f,ox ) of novel disordered Li 1+x Ta x Fe 1−2x O 2 and reported (M′′ = Mn 3+ and Fe 3+ ).
Thermochemical air separation via cyclic redox reactions of oxide-based oxygen sorbents has the potential to achieve high energy efficiency. Although a number of promising sorbents have been investigated, further improvements in sorbent performance through a fundamental understanding of the structure–performance relationships are highly desirable. In this study, we systematically investigated the effects of A and B site dopants on the oxygen uptake/release properties (i.e., vacancy formation energy, reduction enthalpy, oxygen release temperature, and oxygen capacity) of the SrFeO 3 family of perovskites as oxygen sorbents. A monotonic correlation between DFT calculated oxygen vacancy formation energy and oxygen release temperature demonstrates the effectiveness of DFT for guiding sorbent selection. Combining vacancy formation energy with stability analysis, dopants such as Ba and Mn have been identified for tuning the redox property of SrFeO 3 sorbents, and increasing the oxygen capacity for temperature and pressure swings when compared to undoped SrFeO 3 . The Mn doped sample proved to be highly stable, with less than a 3% decrease in capacity over 1000 cycles. Although the dynamic nature of the redox process makes it difficult to use a single vacancy formation energy as the descriptor, a systematic approach was developed to correlate the oxygen storage capacities with the sorbents’ compositional properties and vacancy formation energies. The combination of DFT calculations with experimental studies from this study provides a potentially effective strategy for developing improved sorbents for thermochemical air separation.
This tutorial review explains the emerging understanding of the surface and bulk chemistry – electrochemical performance relations in anode supports (aka secondary current collectors, substrates, templates, hosts) for lithium, sodium and potassium metal batteries (LMBs, SMBs or NMBs, and KMBs or PMBs). In relation to each section, the possible future research directions that may yield both new insight and improved cycling behavior are explored. Representative case studies from Li, Na and K metal anode literature are discussed. The tutorial starts with an overview of the solid electrolyte interphase (SEI), covering both the “classic” understanding of the SEI structure and the “modern” insights obtained by site-specific cryogenic stage TEM analysis. Next, the multiple roles of supports in promoting cycling stability are detailed. Without an optimized support architecture, the metal–electrolyte interface becomes geometrically unstable at a lower current density and cycle number. Taking into consideration the available literature on LMBs, SMBs and KMBs, it is concluded that effective architectures are geometrically complex and electrochemically lithiophilic, sodiophilic or potassiophilic, so as to promote conformal electrochemical wetting of the metal during plating/stripping. One way that philicity is achieved is through support oxygen surface chemistry, which yields a reversibly reactive metal–support interface. Examples of this include the well-known oxygen–carbon moieties in reduced graphene oxide (rGO), as well as classic ion battery reversible conversion reaction oxides such as SnO 2 . Unreactive surfaces lead to dewetted island growth of the metal, which is a precursor to dendrites, and possibly to non-uniform dissolution. Surveying the literature on various Li, Na and K metal supports, it is concluded that the key bulk thermodynamic property that will predict electrochemical wetting behavior is the enthalpy of infinite solution (Δ sol H ∞ ) of the metal (solute) into the support (solvent). Large and negative Δ sol H ∞ promotes uniform metal wetting on the support surface, corresponding to relatively low plating overpotential. Positive Δ sol H ∞ promotes dewetted islands and a relatively high overpotential. This simple rule explains a broad range of studies on Li, Na and K metal – support interactions, including the previously reported correlation between mutual solubility and wetting.
Imogolite, a nanotubular aluminosilicate mineral, is commonly found in volcanic soils, where it exerts a control on carbon dynamics. Synthetic imogolites are used for the removal of contaminants from industrial effluents and are considered for a range of other applications including gas adsorption and functionalised heterogeneous catalysts. In spite of their environmental and industrial relevance, the properties of imogolite–water interfaces remain poorly understood. In this work, an experimental and computational study is presented in which the structure and energetics of water are characterized on the curved external surface of imogolite and the hydrophilicity of this surface is contrasted with that of gibbsite, its planar counterpart. Atomic force spectroscopy experiments show that in spite of their identical surface structure, imogolite has a lower hygroscopicity than gibbsite. Molecular dynamics simulations provide an explanation for this observation: the curvature of imogolite prevents the formation of in-plane H-bonds along the directions of the nanotube circumference, lowering the enthalpy of adsorption of water molecules. The different arrangement of surface H-bonds and the resulting differences in hydration properties also affects the acidity constants of surface hydroxyl groups. This ‘nanotube effect’ may be relevant to other nanotubular systems with high curvatures, potentially impacting their wetting properties, their colloidal stability and their affinity towards hydrophobic organic moieties.
Evolution has converged on cation–p interactions for recognition of quaternary alkyl ammonium groups such as trimethyllysine (Kme3). While computational modelling indicates that Trp provides the strongest cation–p interaction of the native aromatic amino acids, there is limited corroborative data from measurements within proteins. Herein we investigate a Tyr to Trp mutation in the binding pocket of the HP1 chromodomain, a reader protein that recognizes Kme3. Binding studies demonstrate that the Trpmediated cation–p interaction is about -5 kcal mol -1 stronger, and the Y24W crystal structure shows that the mutation is not perturbing. Quantum mechanical calculations indicate that greater enthalpic binding is predominantly due to increased cation–π interactions. NMR studies indicate that differences in the unbound state of the Y24W mutation lead to enthalpy–entropy compensation. These results provide direct experimental quantification of Trp versus Tyr in a cation–π interaction and afford insight into the conservation of aromatic cage residues in Kme3 reader domains.
The molecular and nanoscale origins of nonideality in excess thermodynamic properties are essential to understanding cosolvent mixtures, yet they remain challenging to determine. Here, we consider a binary mixture of water and an amphiphile, N,N,N',N'-tetramethylmalonamide (TMMA), which is characterized by strong hydrogen bonding between the two components and no hydrogen bonding between amphiphiles. Using molecular dynamics simulation, validated with excess volume measurements and X-ray scattering, we identify three distinct solution regimes across the composition range of the binary mixture and find that the transition between two of these regimes, marked by the water percolation threshold, is closely correlated with minima in the excess volume and excess enthalpy. Structural analysis of the simulations reveals an interplay between local interactions and solution nanostructure, determined by the relative strength of the water–water and water–amphiphile hydrogen bonding interactions. By comparison with other amphiphiles, such as linear alcohols, the relative strength of like and unlike interactions between water and amphiphile affects the relationship between thermodynamics and structural regimes. This provides insight into how molecular forces of mutual solvation interact across length scales and how they manifest in excess thermodynamic properties.
We have observed the ultrafast conformational dynamics of electronically excited N-methyl piperidine (NMP) using time-resolved Rydberg fingerprint spectroscopy. Optical excitation at various wavelengths ranging from 212 nm to 229 nm leads to the 3s or 3p Rydberg states and induces coherent oscillatory motions with periods of about 700 fs. Furthermore, these coherent motions survive the internal conversion from 3p to 3s but then dephase on a time scale of a few oscillations. Intramolecular vibrational energy redistribution on a picosecond time scale leads to an equilibrium between two conformeric structures that are separated in binding energy by 0.09 eV. Model calculations using the DFT-SIC method are in excellent agreement with the experiments and identify the conformers as the chair and twist structures of NMP. The analysis of the equilibrium parameters at long time delays as a function of excitation wavelength allows for the extraction of thermodynamic parameters for the conformeric transformation. We derive an enthalpy of the chair to twist reaction in the 3s excited state of 62 meV with an entropy of 19.70 J mol –1 K –1 . An activation energy of 276 meV is also obtained with a kinetic model.
Silver pentazolate, a high energy density compound containing the cyclo-N 5 – anion, has recently been synthesized under ambient conditions. However, due to high sensitivity to irradiation, its crystal structure has not been determined. In this work, silver–nitrogen crystalline compounds under ambient conditions and at high pressures, up to 100 GPa, are predicted and characterized by performing first-principles evolutionary crystal structure searching with variable stoichiometry. It is found that newly discovered AgN 5 and AgN 6 are the only thermodynamically stable silver–nitrogen compounds at pressures between 42 and 80 GPa. In contrast to AgN 5 , the pentazolate AgN 6 compound contains N 2 diatomic molecules in addition to cyclo-N 5 – . These AgN 5 and AgN 6 crystals are metastable under ambient conditions with positive formation enthalpies of 54.95 kJ mol –1 and 46.24 kJ mol –1 , respectively. Here, the underlying cause of the stability of cyclo-N 5 – silver pentazolates is the enhanced aromaticity enabled by the charge transfer from silver atoms to nitrogen rings. To aid in the experimental identification of these materials, calculated Raman spectra are reported at ambient pressure: the frequencies of N 5 – vibrational modes of AgN 5 are in good agreement with those measured in the experiment.
The solubility parameter (SP) of a molecular species is a vital feature that indicates polarity and quantifies the ‘like-seeks-like’ principle, which is used in chemistry to screen solvents for dissolution. Recent studies have demonstrated that ionic liquids (ILs) and deep eutectic solvents (DESs) efficiently solubilize lignocellulosic biomass and promote enzymatic saccharification into sugars used for the production of biofuels and value-added chemicals. Understanding the solubility of plant biopolymers, particularly lignin, in ILs and DESs is critical for selecting candidate ILs and DESs for biomass pretreatment; however, experimentally measuring SPs is challenging. Thus, the present study investigates lignin dissolution mechanisms in IL/DES and prediction of the solubility parameters (Hildebrand and Hansen) of lignin, ILs, and DESs using multi-resolution simulation approaches. Here, solubility parameters of the studied compounds were predicted using molecular dynamics (MD) simulations, and the SP of lignin was determined to be 23–27 MPa 1/2 , which was close to the polymeric lignin solubility parameter (24.3–25.5 MPa 1/2 ). The SPs of ILs namely [Ch][Lys], [Ch][Oct], and [Emim][Lys] were predicted to be ~26 MPa 1/2 , which is close to lignin's SPs and resulted in increased biomass delignification. The MD simulated SPs were validated by both the COSMO-RS model and experimental investigations, with the results showing a close agreement between the predicted and experimentally obtained SPs. In addition, the enthalpy of vaporization (ΔH vap ) of ILs/DESs was predicted based on the potential energy of the system, and the ΔH vap of ILs/DESs was around 40–65 kcal mol –1 , which is 5–8 times higher than that of traditional organic solvents.
We extend a previous study on the influence of nanoparticles on the decay of nanoimprinted polymer film patterns to compare the effects of “bare” silica (SiO 2 ) nanoparticles and SiO 2 nanoparticles with grafted polymer layers having the same chemical composition as the polymer matrix. This method involves nanoimprinting substrate-supported polymer films using a pattern replicated from a digital versatile disc (DVD), and then annealing the patterned polymer nanocomposite films at elevated temperatures to follow the decay of the topographic surface pattern with time by atomic force microscopy imaging after quenching. We quantified the relaxation of the pattern height (“slumping”) and determined the relaxation time τ for this pattern decay process as a function of nanoparticle filler type and concentration to determine how nanoparticle additives influence relative film stability. Attractive interactions between the bare nanoparticles and the polymer matrix significantly enhance the thermal resilience of the nanopatterns to decay, compared to those of the particle brushes, wherein the particle core interactions are screened from the matrix via the brush layer. A novel aspect of this method is that it readily lends itself to in situ film relaxation measurements in a manufacturing context. We observe that the relaxation time of the pattern relaxation exhibits entropy–enthalpy compensation in the free energy parameters governing the pattern relaxation process as a function of temperature, irrespective of the NP system used, consistent with our previous experimental and computational studies.
Thin-film solid-state interfacial dealloying (thin-film SSID) is an emerging technique to design nanoarchitecture thin films. The resulting controllable 3D bicontinuous nanostructure is promising for a range of applications including catalysis, sensing, and energy storage. Using a multiscale microscopy approach, we combine X-ray and electron nano-tomography to demonstrate that besides dense bicontinuous nanocomposites, thin-film SSID can create a very fine (5–15 nm) nanoporous structure. Not only is such a fine feature among one of the finest fabrications by metal-agent dealloying, but a multilayer thin-film design enables creating nanoporous films on a wider range of substrates for functional applications. Through multimodal synchrotron diffraction and spectroscopy analysis with which the materials’ chemical and structural evolution in this novel approach is characterized in details, we further deduce that the contribution of change in entropy should be considered to explain the phase evolution in metal-agent dealloying, in addition to the commonly used enthalpy term in prior studies. Here, the discussion is an important step leading towards better explaining the underlying design principles for controllable 3D nanoarchitecture, as well as exploring a wider range of elemental and substrate selections for new applications.
Here, the ˙OH-initiated oxidation of methyl hydroperoxide, which plays an important role in the atmospheric chemistry of methane, was theoretically characterized using high-accuracy composite amHEAT-345(Q) coupled-cluster calculations followed by a two-dimensional E,J resolved master equation analysis. The reaction is found to proceed through two distinct hydrogen-bonded pre-reactive complexes leading to two product channels, in accord with the experimental observations: (i) ˙OH + CH 3 OOH → CH 3 OO˙ + H 2 O with a yield of 0.8 ± 0.1, and (ii) ˙OH + CH 3 OOH → HCHO + ˙OH + H 2 O with a yield of 0.2 ± 0.1. The calculated reaction enthalpies are within 0.2 kcal mol -1 of the benchmark ATcT values. Overall thermal rate coefficients obtained from first principles are found to be in the low-pressure limit at atmospheric pressure; the total rate coefficient can be expressed over the T = 200–450 K range as k(T) = 5.0 × 10 -12 × T -0.152 × exp(287/T) cm 3 s -1 , strongly supporting the experimental results of Vaghjiani and Ravishankara, with which this expression agrees within ca. 15%. The current results show that (i) is the principal reaction channel and support the view that, due to its inherently fast transformations, CH 3 OOH is an important redistribution species for HO x ˙ radicals in the Earth's atmosphere.
A group of multi-component oxides based on BaZrO 3 have been prepared using a solid-state reaction method and examined in terms of their water uptake and thermodynamics of formation. Depending on the type and amount of acceptor substitution, the synthesized compounds exhibit various proton defect concentrations, reaching up to 0.2 mol/mol for a compound containing 10 different elements in the B-sublattice, where 50% of them are acceptors. Further, for the most promising materials, van’t Hoff plots were created and the enthalpies and entropies of hydration were calculated. At higher temperatures, these parameters do not differ from the values for the reference yttrium doped barium zirconate. However, at lower temperatures they are more negative, indicating a more exothermic process of proton incorporation.
Oxygen is a critical gas in numerous industries and is produced globally on a gigatonne scale, primarily through energy-intensive cryogenic distillation of air. The realization of large-scale adsorption-based air separations could enable a significant reduction in associated worldwide energy consumption and would constitute an important component of broader efforts to combat climate change. Certain small-scale air separations are carried out using N 2 -selective adsorbents, although the low capacities, poor selectivities, and high regeneration energies associated with these materials limit the extent of their usage. In contrast, the realization of O 2 -selective adsorbents may facilitate more widespread adoption of adsorptive air separations, which could enable the decentralization of O 2 production and utilization and advance new uses for O 2 . Here, we present a detailed evaluation of the potential of metal–organic frameworks (MOFs) to serve as O 2 -selective adsorbents for air separations. Drawing insights from biological and molecular systems that selectively bind O 2 , we survey the field of O 2 -selective MOFs, highlighting progress and identifying promising areas for future exploration. As a guide for further research, the importance of moving beyond the traditional evaluation of O 2 adsorption enthalpy, ΔH, is emphasized, and the free energy of O 2 adsorption, ΔG, is discussed as the key metric for understanding and predicting MOF performance under practical conditions. Based on a proof-of-concept assessment of O 2 binding carried out for eight different MOFs using experimentally derived capacities and thermodynamic parameters, we identify two existing materials and one proposed framework with nearly optimal ΔG values for operation under user-defined conditions. While enhancements are still needed in other material properties, the insights from the assessments herein serve as a guide for future materials design and evaluation. Computational approaches based on density functional theory with periodic boundary conditions are also discussed as complementary to experimental efforts, and new predictions enable identification of additional promising MOF systems for investigation.
Two polytypic heterolayered salt-inclusion chalcogenides, o-[Na 2 Cl]GaQ 2 and t-[Na 2 Cl]GaQ 2 , were obtained via a NaCl/NaI flux-assisted synthesis, as part of an investigation of the Na–Ga–Q (Q = S and Se) system. The use of a different flux, NaBr/NaI, in the Na–Ga–Se system did not lead to the formation of salt-inclusion phases, but instead the novel Na 2 GaSe 3 and Na 4 Ga 2 Se 5 phases were obtained. Thermal and electronic properties of [Na 2 Cl]GaS 2 materials were investigated with differential scanning calorimetry, post-quenching ex situ powder X-ray diffraction (PXRD), high-temperature PXRD, and enthalpy and electronic structure calculations via density functional theory. Those studies determined the absence of any temperature-induced phase transition between the o-[Na 2 Cl]GaS 2 and t-[Na 2 Cl]GaS 2 polytypic compounds. Moreover, herein we probed the suitability of the heterolayered [Na 2 Cl]GaS 2 single crystals as a sorbent for UO 2 2+ uptake and monitored this process by energy-dispersive and infrared spectroscopies and PXRD, which revealed that the [Na 2 Cl]+ insert could be exchanged with UO 2 2+ on the surface while the UO 2 2+ intercalation decomposes the [Na 2 Cl]GaS 2 structure.
Hydrazine borane (N 2 H 4 BH 3 ) has attracted considerable interest as a promising solid-state hydrogen storage material owing to its high hydrogen content and easy preparation. In this work, pressure-induced phase transitions of N 2 H 4 BH 3 were investigated using a combination of vibrational spectroscopy, X-ray diffraction, and density functional theory (DFT) up to 30 GPa. Our results showed that N 2 H 4 BH 3 exhibits remarkable structural stability in a very broad pressure region up to 15 GPa, and then two phase transitions were identified: the first one is from the ambient-pressure Pbcn phase to a Pbca phase near 15 GPa; the second is from the Pbca phase to a Pccn phase near 25 GPa. As revealed by DFT calculations, the unusual stability of N 2 H 4 BH 3 and the late phase transformations were attributed to the pressure-mediated evolutions of dihydrogen bonding frameworks, the compressibility and the enthalpies of the high-pressure polymorphs. In conclusion, our findings provide new insight into the structures and bonding properties of N 2 H 4 BH 3 that are important for hydrogen storage applications.
Fluorinated species have a pivotal role in semiconductor material chemistry and some of them have been detected beyond the Earth's atmosphere. Achieving good energy accuracy on fluorinated species using quantum chemical calculations has long been a challenge. In addition, obtaining direct experimental thermochemical quantities has also proved difficult. Here, we report the threshold photoelectron and photoion yield spectra of SiF and CF radicals generated with a fluorine reactor. The spectra were analysed with the support of ab initio calculations, resulting in new experimental values for the adiabatic ionisation energies of both CF (9.128 ± 0.006 eV) and SiF (7.379 ± 0.009 eV). Using these values, the underlying thermochemical network of Active Thermochemical Tables was updated, providing further refined enthalpies of formation and dissociation energies of CF, SiF, and their cationic counterparts.
Critical particle size can be determined with known surface energy. The surface enthalpy of yttrium titanate pyrochlores was determined to be 4.07 ± 0.32 J m −2 by calorimetry, and the lower limit of critical particle size for this is around 5.0 nm.