Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Opacities of singly and doubly ionized neodymium and uranium for kilonova emission modeling

ABSTRACT Even though the electromagnetic counterpart AT2017gfo to the binary neutron star merger GW170817 is powered by the radioactive decay of r-process nuclei, only few tentative identifications of light r-process elements have been made so far. One of the major limitations for the identification of heavy nuclei is incomplete or missing atomic data. While substantial progress has been made on lanthanide atomic data over the last few years, for actinides there has been less emphasis, with the first complete set of opacity data only recently published. We perform atomic structure calculations of neodymium (Z = 60) as well as the corresponding actinide uranium (Z = 92). Using two different codes [flexible atomic code (fac) and hartree–fock-relativistic (hfr)] for the calculation of the atomic data, we investigate the accuracy of the calculated data (energy levels and electric dipole transitions) and their effect on kilonova opacities. For the fac calculations, we optimize the local central potential and the number of included configurations and use a dedicated calibration technique to improve the agreement between theoretical and available experimental atomic energy levels (AELs). For ions with vast amounts of experimental data available, the presented opacities agree quite well with previous estimations. On the other hand, the optimization and calibration method cannot be used for ions with only few available AELs. For these cases, where no experimental nor benchmarked calculations are available, a large spread in the opacities estimated from the atomic data obtained with the various atomic structure codes is observed. We find that the opacity of uranium is almost double the neodymium opacity.

Flörs, A. (ORCID:0000000320242819)↗

Detection of Ketenimine (CH2CNH) in SGRB2(N) Hot Cores

Ketenimine (CH2CNH) has been detected in absorption toward the starforming region Sagittarius B2(N) with the 100-m Green Bank Telescope (GBT) by means of three rotational transitions: 7(sub 16)-8(sub 08) at 41.5 GHz, 8(sub 19)-9(sub 09), at 23.2 GHz, and 9(sub 18)-10(sub 0,10) at 4.9 GHz. Ketenimine has a sparse rotational spectrum below 50 GHz. From transition line strength arguments, the spectral lines found are the ones most likely to be detected and occur in spectral regions that have little possibility of confusion with other molecular species. Partially resolved hyperfine structure is apparent in the 4.9 GHz transition which has energy levels approximately 50 K above ground state level; the absorption seen in this transition appears to be emanating from gas in close proximity to the LMH hot core that has a systemic LSR velocity of +64 kilometers per second. By comparison, the 41.5 GHz and 23.2 GHz transitions have lower energy levels of approximately 33 K and approximately 41 K, respectively; and show absorption against the two star-forming SgrB2(N) hot cores with systematic LSR velocities of +64 (the LMH) and +82 kilometers per second. These ketenimine data show that the hot core at +82 kilometers per second is cooler than the hot core at +64 kilometers per second. Ketenimine is likely formed directly from its isomer methyl cyanide (CH3CN) by tautomerization driven by shocks that pervade the star-forming region.

Lovas, F. J.↗

Theoretical study of the similarity between nuclei with four valence nucleons in A = 208, 132 and 68 regions

One of the most interesting topics in nuclear structure is the study of nuclei near the limits of particle stability. Much attention is currently being focused on nuclei with few valence nucleons around Z= 28, 50 and 82, in particular the 68Ni, 132Sn and 208Pb neighbors. We are interested of the even-even isobars 72Ni, 72Ge and 72Zn in 68Ni region, 136Sn, 136Xe and 136Te in 132Sn region, 212Pb, 212Rn and 212Po in 208Pb region. The calculation of energies spectra using the effective interactions JUN45M, CW{Delta}5082 and KHP shows a good agreement with the available experimental data for the energie levels and their sequences. We have extended the existed similarity between lead and tin regions to the Nickel region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of Deformation on the Energy and Optical Absorption Spectra of Fullerene C{sub 20} within the Hubbard Model

Abstract—Anticommutator Green’s functions and energy spectra of fullerene C{sub 20} with the I{sub h}, D{sub 5d}, and D{sub 3d} symmetry groups have been obtained in an analytical form within the Hubbard model and static fluctuation approximation. The energy states have been classified using the methods of group theory, and the allowed transitions in the energy spectra of fullerene C{sub 20} with the I{sub h}, D{sub 5d}, and D{sub 3d} symmetry groups have been determined. It is also shown how the energy levels of fullerene C{sub 20} with the I{sub h} symmetry group are split with the symmetry reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large positive magnetoresistance effects in the dilute magnetic semiconductor (Zn,Mn)Se in the regime of electron hopping

Magnetoresistance in dilute magnetic semiconductors is studied in the hopping transport regime. Measurements performed on Cl-doped Zn{sub 1–x}Mn{sub x}Se with x < 8% are compared with simulation results obtained by a hopping transport model. The energy levels of the Cl donors are affected by the magnetization of Mn atoms in their vicinity via the s-d exchange interaction. Compositional disorder, in particular, the random distribution of magnetic atoms, leads to a magnetic-field induced broadening of the donor energy distribution. As the energy distribution broadens, the electron transport is hindered and a large positive contribution to the magnetoresistance arises. This broadening of the donor energy distribution is largely sufficient to account for the experimentally observed magnetoresistance effects in n-type (Zn,Mn)Se with donor concentrations below the metal–insulator transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Zeeman spectroscopy of the internal transition {sup 4}T{sub 1} to {sup 6}A{sub 1} of Fe{sup 3+} ions in wurtzite GaN

Internal transitions of Fe{sup 3+} ions in wurtzite gallium nitride were analyzed by means of photoluminescence, Zeeman, and transmission spectroscopy in order to investigate the fine structure. Magnetic fields up to 14 T were applied perpendicular or parallel to the crystal c-axis, causing a characteristic splitting pattern of the luminescence related to the transition from the {sup 4}T{sub 1} excited state to the {sup 6}A{sub 1} ground state of Fe{sup 3+}. The complete Hamiltonian matrix is constructed taking into account the crystal field in cubic and trigonal symmetry, spin-orbit interaction, and the influence of external magnetic fields. Numerical solution yields the exact energy level scheme of the excited state {sup 4}G of Fe{sup 3+} ions in GaN, which partly revises assumptions based on a qualitative treatment considering group theory only and invoking the influence of a Jahn-Teller effect. The coincidence of the calculated energy levels with the experimental data verifies the derived fine structure of the 3d metal ion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the density of surface states at the semiconductor-insulator interface in a metal-insulator-semiconductor structure

The temporal dependence of thermal generation of electrons from occupied surface states at the semiconductor-insulator interface in a metal-insulator-semiconductor structure is studied. It is established that, at low temperatures, the derivative of the probability of depopulation of occupied surface states with respect to energy is represented by the Dirac {delta} function. It is shown that the density of states of a finite number of discrete energy levels under high-temperature measurements manifests itself as a continuous spectrum, whereas this spectrum appears discrete at low temperatures. A method for processing the continuous spectrum of the density of surface states is suggested that method makes it possible to determine the discrete energy spectrum. The obtained results may be conducive to an increase in resolution of the method of non-stationary spectroscopy of surface states.

36 MATERIALS SCIENCE↗

Comparison of Integrated Radiation Transport Models with TEPC Measurements for the Average Quality Factors in Spaceflights

The purpose of this work is to test our theoretical model for the interpretation of radiation data measured in space. During the space missions astronauts are exposed to the complex field of radiation type and kinetic energies from galactic cosmic rays (GCR), trapped protons, and sometimes solar particle events (SPEs). The tissue equivalent proportional counter (TEPC) is a simple time-dependent approach for radiation monitoring for astronauts on board the International Space Station. Another and a newer approach to Microdosimetry is the use of silicon-on-insulator (SOI) technology launched on the MidSTAR-1 mission in low Earth orbit (LEO). In the radiation protection practice, the average quality factor of a radiation field is defined as a function of linear energy transfer (LET), Q(sub ave)(LET). However, TEPC measures the average quality factor as a function of the lineal energy y, Q(sub ave)(y), defined as the average energy deposition in a volume divided by the average chord length of the volume. Lineal energy, y, deviates from LET due to energy straggling, delta-ray escape or entry, and nuclear fragments produced in the detector volume. Monte Carlo track structure simulation was employed to obtain the response of a TEPC irradiated with charged particle for an equivalent site diameter of 1 micron of wall-less counter. The calculated data of the energy absorption in the wall-less counter were compiled for various y values for several ion types at various discrete projectile energy levels. For the simulation of TEPC response from the mixed radiation environments inside a spacecraft, such as, Space Shuttle and International Space Station, the complete microdosimetric TEPC response, f( y, E, Z), were calculated with the Monte Carlo theoretical results by using the first order Lagrangian interpolation for a monovariate function at a given y value (y = 0.1 keV/micron 5000 keV/micron) at any projectile energy level (E = 0.01 MeV/u to 50,000 MeV/u) of each specific radiation type (Z = 1 to 28). Because the anomalous response has been observed at large event sizes in the experiment due to the escape of energy out of sensitive volume by delta-rays and the entry of delta-rays from the high-density wall into the low-density gas-volume cavity, Monte Carlo simulation was also made for the response of a walled-TEPC with wall thickness 2 mm and density 1 g/cm(exp 3). The radius of cavity was set to 6.35 mm and a gas density 7.874 x 10(exp -5) g/cm(exp 3). The response of the walled- and the wall-less counters were compared. The average quality factor Q(sub ave)(y) for trapped protons on STS-89 demonstrated the good agreement between the model calculations and flight TEPC data as shown. Using an integrated space radiation model (this includes the transport codes HZETRN and BRYNTRN, the quantum nuclear interaction model QMSFRG) and the resultant response distribution functions of walled-TEPC from Monte-Carlo track simulations, we compared model calculations with walled-TEPC measurements from NASA missions in LEO and made predictions for the lunar and the Mars missions. The Q(sub ave)(y) values for the trapped or the solar protons ranged from 1.9-2.5. This over-estimates the Qave(LET) values which ranged from 1.4-1.6. Both quantities increase with shield thickness due to nuclear fragmentation. The Q(sub ave)(LET) for the complete GCR spectra was found to be 3.5-4.5, while flight TEPCs measured 2.9-3.4 for Q(sub ave)(y). The GCR values are decreasing with the shield thickness. Our analysis for a proper interpretation of data supports the use of TEPCs for monitoring space radiation environment.

Kim, Myung-Hee Y.↗

New Polarizability Functions for Calculating Atomic Hydrogen S State Spectral Lines in Exact Agreement with NIST Measurements

This paper presents a new approach to calculating atomic hydrogen energy levels which is simple, fast and accurate. One advantage of this new approach is the ability to explicitly incorporate the polarizability resulting from a scattering event between a hydrogen atom and a photon. The polarizability effect is small but significant, producing exact S state spectral energies. The general calculational approach is applicable to both atomic hydrogen and multi-electron energy levels. Although motivated by the multi-electron case for chemistry applications, the focus of this paper will be calculations that are specific to atomic hydrogen which include the polarizability.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ionization potential for excited S states of the lithium atom

Nonrelativistic, relativistic, quantum electrodynamic, and finite nuclear mass corrections to the energy levels are obtained for the nS{sub 1/2},n=3,...,9 states of the lithium atom. Computational approach is based on the explicitly correlated Hylleraas functions with the analytic integration and recursion relations. Theoretical predictions for the ionization potential of nS{sub 1/2} states and transition energies nS{sub 1/2{yields}}2S{sub 1/2} are compared to known experimental values for {sup 6,7}Li isotopes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effects of Applied Bias and High Field Stress on the Radiation Response of GaN/AlGaN HEMTs

The sensitivity of GaN/AlGaN HEMTs to 1.8 MeV proton irradiation is greatly enhanced by biasing the devices during irradiation and/or applying high field stress before irradiation. The resulting defect energy distributions are evaluated after irradiation and/or high field stress via low-frequency noise measurements. Significant increases are observed in acceptor densities for defects with ~ 0.2 and ~ 0.7 eV energy levels. These defects appear to dominate the degradation in threshold voltage and transconductance for these devices. Density functional theory (DFT) calculations show that N vacancy-related defects in GaN and hydrogenated O N complexes in AlGaN are strong candidates for the defects with ~ 0.2 eV energy levels in these devices. Finally, we also present evidence that the previously unidentified ~ 0.7 eV defect in GaN is a N anti-site defect (N Ga).

1/f noise↗

First-principles modeling of conductivity at the (001), (110), and (111) SrTiO 3 /LaAlO 3 heterointerfaces

Here, the complex polar oxide heterojunction of SrTiO 3 /LaAlO 3 (STO/LAO) is of great interest due to the emergent physical phenomena observed at the interface. STO and LAO separately are wide band-gap insulators. However, upon joining them at the 001, 110, and 111 crystallographic planes, the interface undergoes a transition to a conductive state. Although first-principles modeling of the 001 plane interface has been widely studied, there is a lack of reports regarding the 110 and 111. This paper expands the theoretical model of the STO/LAO heterointerface to the three crystallographic planes (001, 110, and 111) where the conductivity has been experimentally reported. The calculations showed that whereas at the 001 interface the conductivity appears at a critical thickness of 4 monolayers of LAO, the 110 and 111 planes have no clear critical thickness; these two interfaces were always conductive. Nevertheless, the number of conductive electrons per unit cell increases with the thickness of the LAO layer in the 110 and 111 interfaces. This is related to the energy levels downshifting due to the electrostatic potential buildup (which was in the opposite direction respect to the 001 interface), increasing the number of conductive sates below the Fermi level. Given the absence of a critical thickness and the fact that chemical intermixing and oxygen vacancies at the interface were not considered, the main mechanism responsible for the conductivity in the 110 and 111 planes was attributed to the large structure reconstruction that locally changes the energy levels at the interface causing charge transfer and accumulation at the layers close to the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bethe ansatz technique in shell model

We review the application of Bethe ansatz method to the shell model Hamiltonian describing s-pairs of nucleons which interact with an orbit dependent separable pairing force. We concentrate on the special case in which the separations between the single particle energy levels are small in comparison with the pairing energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Defect engineering in GaAs using high energy light ion irradiation: Role of electronic energy loss

We report on the application of high energy light ions (Li and O) irradiation for modification of defects, in particular, for annihilation of point defects using electronic energy loss in GaAs to minimize the defects produced by nuclear collisions. The high resolution x-ray diffraction and micro-Raman spectroscopy have been used to monitor that no lattice damage or amorphization take place due to irradiating ions. The effects of irradiation on defects and their energy levels have been studied using thermally stimulated current spectroscopy. It has been observed that till an optimum irradiation fluence of 10{sup 13} ions/cm{sup 2} there is annihilation of native defects but further increase in irradiation fluence results in accumulation of defects, which scales with the nuclear energy loss process, indicating that the rate of defects produced by the binary collision process exceeds rate of defect annihilation. Defect annihilation due to electronic energy loss has been discussed on the basis of breaking of bonds and enhanced diffusivity of ionized native defects.

36 MATERIALS SCIENCE↗

Trap-assisted Auger-Meitner recombination in GaN p-i-n diodes

Most properties of semiconductor devices are dominated by shallow impurities. However, deep defects often play an important role, for instance, in recombination processes or high field transport. While a variety of techniques are available to assess the density and energy levels of impurities, other properties, such as the recombination mechanisms of the defects, escape observation. We report on the direct measurement of hot electrons generated by trap-assisted Auger-Meitner recombination (TAAR) in GaN p-i-n diodes. By performing electron emission spectroscopy (EES) on diodes with surfaces activated to negative electron affinity by cesium, we observe the expected overflow electrons of p-i-n diodes under low current injection. However, when operating the devices at higher current densities, as low as ∼25 A/c⁢m 2 , we measure the emission of high-energy electrons. At variance with the observed hot electrons in light-emitting diodes (LEDs) using EES, the hot electrons generated in p-i-n diodes at our tested currents cannot be from eeh Auger-Meitner recombination due to the diodes' significantly lower carrier densities compared to those in LEDs. During our measurements, we observe the emission of accumulated electrons with energies ∼0.42 eV, ∼0.99 eV, ∼1.43 eV, and ∼2.32 eV above the conduction-band minimum (CBM) at various bias conditions, suggesting the existence of conduction-band features in GaN at these energies where electrons can be long-lived, such as satellite-valley minima and inflection points. We also measure incompletely relaxed hot electrons approaching energies 1.97 ± 0.13 eV and 2.94 ± 0.13 eV above the CBM, as the diodes are biased to high currents, suggesting at least some of the TAAR partaking defects have an energy level ≳1.97 eV and ≳2.94 eV away from either the conduction or valence band edges. Additionally, at our highest operating currents, we measure hot electrons with energies 3.28 ± 0.13 eV above the CBM, providing direct evidence of TAAR processes involving shallow impurities. This unexpected observation of TAAR in GaN p-i-n diodes spotlights the importance of further studies of defects in GaN and the necessity to incorporate the multi-phonon emission, radiative, and TAAR capture steps of defect-assisted recombination cycles into device modeling. Furthermore, this experiment demonstrates the applicability of the simplest semiconductor structures, p-i-n diodes, as a test bed to study the rich recombination physics of semiconductor materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orbital Analogue of the Quantum Anomalous Hall Effect in p-Band Systems

We investigate the topological insulating states of the p-band systems in optical lattices induced by the on site orbital angular momentum polarization, which exhibit gapless edge modes in the absence of Landau levels. This effect arises from the energy-level splitting between the on site p{sub x}+ip{sub y} and p{sub x}-ip{sub y} orbitals by rotating each optical lattice site around its own center. At large rotation angular velocities, this model naturally reduces to two copies of Haldane's quantum Hall model. The distribution of the Berry curvature in momentum space and the quantized Chern numbers are calculated. The experimental realization of this state is feasible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of nitrogen plasma power on defect levels in Ni/n-GaN Schottky diodes grown by molecular beam epitaxy

The incorporation of deep level defects in n-type GaN grown by plasma assisted molecular beam epitaxy was studied via systematic adjustment of the nitrogen plasma source power from 150 to 400 W while maintaining a constant V/III beam flux ratio. Deep level optical spectroscopy and conventional thermal deep level transient spectroscopy measurements, which together enable deep level detection throughout the GaN band gap, revealed several deep level concentrations that depend strongly on rf-plasma power. The concentrations of the gallium vacancy deep level at E{sub C}-2.60 eV and carbon-related point defects with energy levels at E{sub C}-3.28 and E{sub C}-1.35 eV are found to be very sensitive to the nitrogen source power, increasing by up to 50 times for a corresponding increase in plasma power from 150 to 400 W. The relation between the concentrations of these traps and plasma power follows an Arrhenius-type behavior and is suggestive of plasma damage associated with the energetics of the constituent active nitrogen species. In contrast, two traps at E{sub C}-0.86 and E{sub C}-0.59 eV did not exhibit a systematic dependence on plasma power, with this difference a result of the dislocation-related nature of these defects.

36 MATERIALS SCIENCE↗

How to control spin-Seebeck current in a metal-quantum dot-magnetic insulator junction

The control of the spin-Seebeck current is still a challenging task for the development of spin caloritronic devices. In this work, we construct a spin-Seebeck device by inserting a quantum dot (QD) between the metal lead and magnetic insulator. Using the slave-particle approach and noncrossing approximation, we find that the spin-Seebeck effect increases significantly when the energy level of the QD locates near the Fermi level of the metal lead due to the enhancement of spin flipping and occurrences of quantum resonance. Since this can be easily realized by applying a gate voltage in experiments, the spin-Seebeck device proposed here can also work as a thermovoltaic transistor. Moreover, the optimal correlation strength and the energy level position of the QD are discussed to maximize the spin-Seebeck current as required for applications in controllable spin caloritronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗