Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Transistor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Modeling charge transport in C{sub 60}-based self-assembled monolayers for applications in field-effect transistors

We have investigated the conductance properties of C{sub 60}-containing self-assembled monolayers (SAMs), which are used in organic field-effect transistors, employing a combination of molecular-dynamics simulations, semiempirical electronic structure calculations, and Landauer transport theory. The results reveal the close relation between the transport characteristics and the structural and electronic properties of the SAM. Furthermore, both local pathways of charge transport in the SAMs and the influence of structural fluctuations are analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical model of the polarization Coulomb field scattering in strained AlGaN/AlN/GaN heterostructure field-effect transistors

The theoretical model of the polarization Coulomb field scattering (PCF) caused by the polarization charge density variation at the AlGaN/AlN interface in strained AlGaN/AlN/GaN heterostructure field-effect transistors has been developed. And the theoretical values for the electron drift mobility, which were calculated using the Matthiessen's rule that includes PCF, piezoelectric scattering, polar optical-phonon scattering, and interface roughness scattering, are in good agreement with our experimental values. Therefore, the theoretical model for PCF has been confirmed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Point defects in Ga 2 O 3

In the field of high-power electronics, gallium oxide (Ga 2 O 3 ) is attracting attention due to its wide band gap and ability to be doped n-type. Point defects, including vacancies, impurities, and dopants, play important roles in optimizing device performance. This tutorial discusses the fundamental properties of point defects in monoclinic β-Ga 2 O 3 and the methods employed to study them. Oxygen vacancies are deep donors that do not cause n-type conductivity but may compensate acceptors. Gallium vacancies are deep acceptors that can be partially passivated by hydrogen. Substitutional magnesium is a promising acceptor that produces semi-insulating material and also forms a complex with hydrogen. Calcium and iron also have deep acceptor levels. Iridium deep donors are introduced into crystals grown from a melt in an Ir crucible. Here, other defects are introduced by irradiation with energetic particles such as neutrons or protons. In addition to altering the electronic properties, defects give rise to UV/visible emission bands in photoluminescence and cathodoluminescence spectra.

36 MATERIALS SCIENCE↗

Progress in Epitaxial Thin-Film Na 3 Bi as a Topological Electronic Material

Trisodium bismuthide (Na 3 Bi) is the first experimentally verified topological Dirac semimetal, and is a 3D analogue of graphene hosting relativistic Dirac fermions. Its unconventional momentum-energy relationship is interesting from a fundamental perspective, yielding exciting physical properties such as chiral charge carriers, the chiral anomaly, and weak anti-localization. It also shows promise for realizing topological electronic devices such as topological transistors. Herein, an overview of the substantial progress achieved in the last few years on Na 3 Bi is presented, with a focus on technologically relevant large-area thin films synthesized via molecular beam epitaxy. Key theoretical aspects underpinning the unique electronic properties of Na 3 Bi are introduced. Next, the growth process on different substrates is reviewed. Spectroscopic and microscopic features are illustrated, and an analysis of semiclassical and quantum transport phenomena in different doping regimes is provided. Furthermore, the emergent properties arising from confinement in two dimensions, including thickness-dependent and electric-field-driven topological phase transitions, are addressed, with an outlook toward current challenges and expected future progress.

36 MATERIALS SCIENCE↗

Light emitting field effect transistor with two self-aligned Si nanocrystal layers

Light emitting field effect transistors based on narrow layers of silicon nanocrystals (NCs) in the gate oxide were fabricated. Direct quantum mechanical electron and hole tunneling into NCs was achieved by self-alignment of NCs-interface-distances to {approx}2 nm. The direct tunneling reduces oxide degradation, prolongs device lifetime and increases operation speed. Self-alignment occurs during thermal treatment of ion irradiated stacks of 50 nm polycrystalline silicon/15 nm SiO{sub 2}/(001)Si substrate. An alternating voltage (ac) was applied to the gate to inject charges into the NCs. Due to injection by direct tunneling, electroluminescence extends to higher ac frequencies than reported so far.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer deposition of platinum with enhanced nucleation and coalescence by trimethylaluminum pre-pulsing

Conformal coating of metal layers on three-dimensional structures is essential for advanced electronic devices such as storage elements, transistors, and sensors. The quality of atomic layer deposited platinum on oxide surfaces was enhanced by adding pre-deposition pulses of trimethylaluminum (TMA) for improved wetting. With an optimal number of TMA pre-pulses, a 6 nm thick Pt film was perfectly coalesced in contrast to only Pt island formation without TMA pre-pulses. A Pt gate all around Ge/Si nanowire field effect transistor was realized highlighting the potential of this approach for efficient deposition of Pt on 3D nanoelectronic devices.

36 MATERIALS SCIENCE↗

Electronic properties of novel topological quantum materials studied by angle-resolved photoemission spectroscopy (ARPES)

The discovery of quantum Hall e ect has motivated the use of topology instead of broken symmetry to classify the states of matter. Quantum spin Hall e ect has been proposed to have a separation of spin currents as an analogue of the charge currents separation in quantum Hall e ect, leading us to the era of topological insulators. Three-dimensional analogue of the Dirac state in graphene has brought us the three-dimensional Dirac states. Materials with three-dimensional Dirac states could potentially be the parent compounds for Weyl semimetals and topological insulators when time-reversal or space inversion symmetry is broken. In addition to the single Dirac point linking the two dispersion cones in the Dirac/Weyl semimetals, Dirac points can form a line in the momentum space, resulting in a topological node line semimetal. These fascinating novel topological quantum materials could provide us platforms for studying the relativistic physics in condensed matter systems and potentially lead to design of new electronic devices that run faster and consume less power than traditional, silicon based transistors. In this thesis, we present the electronic properties of novel topological quantum materials studied by angle-resolved photoemission spectroscopy (ARPES).

36 MATERIALS SCIENCE↗

Towards large size substrates for III-V co-integration made by direct wafer bonding on Si

We report the first demonstration of 200 mm InGaAs-on-insulator (InGaAs-o-I) fabricated by the direct wafer bonding technique with a donor wafer made of III-V heteroepitaxial structure grown on 200 mm silicon wafer. The measured threading dislocation density of the In{sub 0.53}Ga{sub 0.47}As (InGaAs) active layer is equal to 3.5 × 10{sup 9} cm{sup −2}, and it does not degrade after the bonding and the layer transfer steps. The surface roughness of the InGaAs layer can be improved by chemical-mechanical-polishing step, reaching values as low as 0.4 nm root-mean-square. The electron Hall mobility in 450 nm thick InGaAs-o-I layer reaches values of up to 6000 cm{sup 2}/Vs, and working pseudo-MOS transistors are demonstrated with an extracted electron mobility in the range of 2000–3000 cm{sup 2}/Vs. Finally, the fabrication of an InGaAs-o-I substrate with the active layer as thin as 90 nm is achieved with a Buried Oxide of 50 nm. These results open the way to very large scale production of III-V-o-I advanced substrates for future CMOS technology nodes.

36 MATERIALS SCIENCE↗

Influence of the measurement procedure on the field-effect dependent conductivity of ZnO nanorods

The electrical properties of field-effect transistors fabricated on the basis of single ZnO nanorods were analyzed under ambient conditions and in the chamber of a scanning electron microscope under high-vacuum conditions. Under ambient conditions, the threshold voltage and conductivity may depend strongly on the details of the measurement procedure as the chosen gate voltage range and gate voltage sweep direction. Electron irradiation in a scanning electron microscope under high-vacuum conditions at {approx}10{sup -5} mbar leads to desorption of oxygen and other electronegative molecules, which can increase the conductivity by more than two orders of magnitude.

36 MATERIALS SCIENCE↗

Electro-Optical Switching Behavior of a Mott Insulator--Band Insulator Interface

Here we present our results of a large photoconductivity in ultra-thin epitaxial layers of LaTiO{sub 3}(LTO) grown on SrTiO{sub 3}(STO) single crystal surfaces on exposure to ultraviolet light. We note that the change in conductivity on photo-exposure can be modulated by an electric field applied in field effect transistor geometry. We present a scenario where electrons from the lower Hubbard band of LTO and oxygen defects states of STO accumulate at the interface. The extent of this accumulation is modified by electric and photon fields giving rise to a potentially new electronic device.

36 MATERIALS SCIENCE↗

Analysis of hopping conduction in semiconducting and metallic carbon nanotube devices

Single-walled carbon nanotube field-effect transistors were irradiated with 20 keV electrons using an e-beam lithography exposure method. Analysis of conduction data in the temperature range from 25 to 300 K indicated the creation of insulating regions containing traps along the nanotube channel. Further analysis of semiconducting and metallic nanotube devices shows dramatic differences in the effect of the electron exposure on the hopping defect barrier heights. Barriers for metallic nanotubes saturate at significantly larger values than semiconducting nanotubes due to shorter localization lengths. The limited and near constant density of states at the Fermi level induces a larger hopping length to localization length ratio, further limiting current and increasing measured trap heights. Poole-Frenkel hopping with an adjustment for electron localization is utilized to explain the inconsistencies. n-type and p-type barriers in the nanotube devices displayed exponential dependence on applied gate voltage bias, with the peak barrier height in the metallic device defining a switch of majority carrier.

36 MATERIALS SCIENCE↗

New THz opportunities based on graphene

Graphene is a new material of a single or multiple layer carbon structure with impressive properties. A brief introduction is initially presented. Graphene does not have a bandwidth and is a semimetal with charge carriers of zero mass. A bandgap can be formed by confining the graphene width in nanoribbon or nanoconstricition structures. For example, the induced bandgap by a 20 nm wide nanoribbon is about 50 meV. The charge carrier mass then increases, but is still very small. This material can especially be employed for various Terahertz applications. Here several examples are to be described, namely a) a THz transistor, b) the opportunities of ballistic electron resonances for THz signal generation, c) the simultaneous optical transmission and electrical conduction up to THz frequencies and d) Cascaded THz emitters. The optical advantages of multilayer graphene can be compared to ITO (Indium Tin Oxide)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Schottky Junction Vertical Channel GaN Static Induction Transistor with a Sub‐Micrometer Fin Width

Abstract GaN‐based vertical transistors have demonstrated its excellent properties for high‐power and high‐frequency electronic devices. This work introduces a GaN‐based static induction transistor (SIT) which is another form of vertical GaN transistors without requiring any p ‐type GaN and gate dielectrics for its operation. Processing strategy to generate the GaN SIT with a sub‐micrometer fin width involves photoresist (PR)‐assisted planarization with an understanding of dry etch parameters for the planar PR surface. The efficacy of this process is demonstrated by the device's triode‐like output characteristics with high current density (0.65 kA cm −2 ) and low ON resistance (1.48 mΩ cm 2 ) at 1 V of drain voltage. In addition, the electrical properties such as current density and modulation are examined depending on the fin width of GaN SIT. The result reveals that the size reduction in the GaN SIT utilizing the sub‐micrometer fin as a channel could increase the current modulation, but it could decrease the current density because of the raised potential minima due to the depletion region overlap. It is believed that the GaN SIT demonstrating high blocking voltage and low ON resistance would present a very promising class of transistor for next‐generation high‐power and high‐frequency electronics.

Chun, Jaeyi↗

Engineering of silicon/HfO{sub 2} interface by variable energy proton irradiation

Surfaces and interfaces between materials are of paramount importance for various phenomena, such as painting a house, catalyst driven chemical reactions, intricate life processes, corrosion of materials, and fabrication of various semiconductor devices. Interface of silicon or other such substrates with any of the oxides has profound effect on the performance of metal oxide field effect transistors and other similar devices. Since a surface is an abrupt termination of a periodic crystal, surface atoms will have some unsaturated valence electrons and these unsaturated bonds at the semiconductor surface make it chemically highly reactive. Other than annealing, there is not much that can be done to manage these unsaturated bonds. This study was initiated to explore the possibility of repairing these unsaturated dangling bonds that are formed at the silicon and oxide interface during the deposition of oxide layer above silicon, by the use of proton irradiation. In order to improve the interface characteristics, we present a method to modify the interface of silicon and hafnium dioxide after its fabrication, through proton irradiation. Results of the study are promising and probably this method might be used along with other methods such as annealing to modify the interface, after its fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The dependency of different stress-level SiN capping films and the optimization of D-SMT process for the device performance booster in Ge n-FinFETs

The capping stressed SiN film is one of the most important process steps for the dislocation stress memorization technique (D-SMT), which has been used widely in the current industry, for the electron mobility booster in the n-type transistor beyond the 32/28 nm technology node. In this work, we found that the different stress-level SiN capping films influence the crystal re-growth velocities along different directions including [100] and [110] directions in Ge a lot. It can be further used to optimize the dislocation angle in the transistor during the D-SMT process and then results in the largest channel stress distribution to boost the device performance in the Ge n-FinFETs. Based on the theoretical calculation and experimental demonstration, it shows that the Ge three dimensional (3D) n-FinFETs device performance is improved ∼55% with the usage of +3 GPa tensile stressed SiN capping film. The channel stress and dislocation angle is ∼2.5 GPa and 30°, measured by the atomic force microscope-Raman technique and transmission electron microscopy, respectively.

36 MATERIALS SCIENCE↗

Electronic system for data acquisition to study radiation effects on operating MOSFET transistors

In this work we present the development of an acquisition system for characterizing transistors under X-ray radiation. The system is able to carry out the acquisition and to storage characteristic transistor curves. To test the acquisition system we have submitted polarized P channel MOS transistors under continuous 10-keV X-ray doses up to 1500 krad. The characterization system can operate in the saturation region or in the linear region in order to observe the behavior of the currents or voltages involved during the irradiation process. Initial tests consisted of placing the device under test (DUT) in front of the X-ray beam direction, while its drain current was constantly monitored through the prototype generated in this work, the data are stored continuously and system behavior was monitored during the test. In order to observe the behavior of the DUT during the radiation tests, we used an acquisition system that consists of an ultra-low consumption16-bit Texas Instruments MSP430 microprocessor. Preliminary results indicate linear behavior of the voltage as a function of the exposure time and fast recovery. These features may be favorable to use this device as a radiation dosimeter to monitor low rate X-ray.

36 MATERIALS SCIENCE↗

Thermal and Thermomechanical Modeling to Design a Gallium Oxide Power Electronics Package: Preprint

The power electronics industry is currently undergoing a major transition by replacing silicon devices with wide-bandgap devices. Gallium oxide devices have the potential to accelerate this transition by offering comparable or even superior performance to other wide-bandgap devices, but at a much lower cost. Recent breakthroughs include demonstration of a laboratory-scale gallium oxide transistors and diodes; however, a functional power electronics package for these devices is yet to be developed. In this paper, the research methodology in designing an electronics package for gallium oxide devices is outlined. Finite element-based thermal and thermomechanical modeling simulations were conducted to realize a package design that meets the combined target of minimal thermal resistance and improved reliability. Different package designs that include various material combinations and cooling configurations were explored, and their thermal and thermomechanical performance are reported. Furthermore, the short-circuit withstanding capabilities of gallium oxide devices were studied and compared with silicon carbide.

30 DIRECT ENERGY CONVERSION↗