Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPLOSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Efficient generation of quasimonoenergetic ions by Coulomb explosions of optimized nanostructured clusters

Coulomb explosion of spherical ion clusters is studied, which are composed of homogeneous two-species (light and heavy) ions. A simple analytical model is developed to describe the explosion performance in terms of two dimensionless parameters, the charge-over-mass ratio, and the charge density ratio. One-dimensional kinetic numerical model is performed to compare with the analytical model and to evaluate the energy coupling efficiency of quasimonoenergetic ion generation. It is crucial to preform an iso-Coulomb-potential profile of the light ions in the cluster for efficient generation of quasimonoenergetic ions. By controlling the radial density profiles of the light and heavy ions, the overall coupling efficiency (equal to the summed kinetic energy of the light ions in the highest 1% energy band divided by total kinetic energy of both ions) is optimized to be >30%-40% when about 90% of the total number of light ions is contained in the thin 1% energy band.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Device for Detection of Explosives, Nuclear and Other Hazardous Materials in Luggage and Cargo Containers

Device for detection of explosives, radioactive and heavily shielded nuclear materials in luggage and cargo containers based on Nanosecond Neutron Analysis/Associated Particles Technique (NNA/APT) is under construction. Detection module consists of a small neutron generator with built-in position-sensitive detector of associated alpha-particles, and several scintillator-based gamma-ray detectors. Explosives and other hazardous chemicals are detected by analyzing secondary high-energy gamma-rays from reactions of fast neutrons with materials inside a container. The same gamma-ray detectors are used to detect unshielded radioactive and nuclear materials. An array of several neutron detectors is used to detect fast neutrons from induced fission of nuclear materials. Coincidence and timing analysis allows one to discriminate between fission neutrons and scattered probing neutrons. Mathematical modeling by MCNP5 and MCNP-PoliMi codes was used to estimate the sensitivity of the device and its optimal configuration. Comparison of the features of three gamma detector types--based on BGO, NaI and LaBr{sub 3} crystals is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of electrical conductivity and equations of state of non-ideal plasma through microsecond timescale underwater electrical wire explosion

Experimental and simulation results of underwater electrical Cu, Al, and W wire explosions in the microsecond timescale are presented. It was shown that the electrical conductivity results for Cu and Al agree well with modified Lee-More and quantum molecular dynamic models for temperatures above 10 kK. The equation of state (EOS) values based on SESAME tables for Cu and Al were slightly modified for intermediate temperatures in order to obtain fitting between experimental and simulated exploding wire radial expansion. Also, it was shown that the electrical conductivity results and the EOS evaluation differ significantly from the results obtained in nanosecond timescale experiments. Finally, it was found that underwater electrical W wire explosion is characterized by the appearance of non-uniformities along the z-axis of the wire. This phenomena adds uncertainty to the possibility of applying this type of experiments for evaluation of the electrical conductivity and EOS of W.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of the pressure force in the explosive dynamics of magnetic islands in double tearing modes

The evolution of magnetic islands at two resonant surfaces during the development of a global tearing mode is investigated via numerical simulations of a reduced set of magneto-hydrodynamic equations in slab plasmas. The explosive dynamics of the islands resulting in an interchange follows a Rutherford-like regime, also referred to as a weakly coupled double tearing mode. It is found that the latent mechanism of this dynamics is the reduction of the total pressure around the opposite X-point and the abrupt growth is associated with an imbalance of the pressure around the islands. Once this imbalance is well established, each plasmoid is pushed to the opposite X-point, increasing the drive for the field merging. A feedback loop then takes place as the reconnection itself decreases the strength of the magnetic field between the tearing layers, i.e., reinforces the pressure imbalance. This loop accelerates reconnection, thus leading to the observed explosive growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of a strong laser field on Coulomb explosion and stopping power of energetic H{sub 3}{sup +} clusters in plasmas

The influence of a high-intensity laser field on the Coulomb explosion and stopping power for a swift H{sub 3}{sup +} cluster ion in a plasma target is studied by means of the molecular dynamic (MD) method based on the linearized Vlasov-Poisson theory. Excitations of the plasma are described by the classical plasma dielectric function. In the presence of the laser field, the general expressions for the induced potential in the target and the interaction force among the ions within the cluster are derived. Based on the numerical solution of the equations of motion for the constituent ions, the Coulomb explosion patterns and the cluster's stopping power are discussed for a range of laser parameters. Numerical results show that the laser field affects the correlation between the ions and contributes to weaken the wake effect and the stopping power as compared to the laser-free case. On the other hand, the stopping power ratio of H{sub 3}{sup +} cluster is higher than the situation of dicluster of H{sub 2}{sup +} due to the vicinage effect in the cluster.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large quantity ion beam generation by persistent Coulomb explosion in a near-critical density plasma channel

The mechanism of Coulomb explosion induced by the interactions of ultra-intense laser pulses with near-critical density plasmas was investigated using 2.5D particle-in-cell simulations. While the Coulomb explosion occurred continuously during pulse propagation inside the plasma, a large quantity of charge was generated and acquired in the backward direction. The accelerated ion beam had a peak energy of several tens of MeV, and the maximum energy was over hundreds MeV. A theoretical model has been proposed to estimate the total acquired charge quantity, the maximum ion energy, and their dependence on the initial plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of extreme state of water by spherical wire array underwater electrical explosion

The results of the first experiments on the underwater electrical explosion of a spherical wire array generating a converging strong shock wave are reported. Using a moderate pulse power generator with a stored energy of {<=}6 kJ and discharge current of {<=}500 kA with a rise-time of {approx}300 ns, explosions of Cu and Al wire arrays of different diameters and with a different number and diameter of wires were tested. Electrical, optical, and destruction diagnostics were used to determine the energy deposited into the array, the time-of-flight of the shock wave to the origin of the implosion, and the parameters of water at that location. The experimental and numerical simulation results indicate that the convergence of the shock wave leads to the formation of an extreme state of water in the vicinity of the implosion origin that is characterized by pressure, temperature, and compression factors of (2 {+-} 0.2) Multiplication-Sign 10{sup 12} Pa, 8 {+-} 0.5 eV, and 7 {+-} 0.5, respectively.

42 ENGINEERING↗

Peculiarity of convergence of shock wave generated by underwater electrical explosion of ring-shaped wire

Nanosecond timescale underwater electrical wire explosions of ring-shaped Cu wires were investigated using a pulsed generator with a current amplitude up to 50 kA. It was shown that this type of wire explosion results in the generation of a toroidal shock wave (SW). Time- and space-resolved optical diagnostics were used to determine azimuthal uniformity of the shock wave front and its velocity. It was found that the shock wave preserves its circular front shape in the range of radii 50μm<r<5 mm. At r≤15μm, azimuthal irregularities of the SW front were obtained indicating the appearance of azimuthal instability. A surprising finding is that the shock wave propagates with a constant velocity of v{sub sw}=1.2M, where M is the Mach number. The dynamics of the leading part of the shock wave, based on the oblique shock wave theory, is presented, explaining the constant velocity of the shock wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Skin explosion of double-layer conductors in fast-rising high magnetic fields

An experiment has been performed to study the electrical explosion of thick cylindrical conductors using the MIG pulsed power generator capable of producing a peak current of 2.5 MA within 100 ns rise time. The experimental goal was to compare the skin explosion of a solid conductor with that of a double-layer conductor whose outer layer had a lower conductivity than the inner one. It has been shown that in magnetic fields of peak induction up to 300 T and average induction rise rate 3 × 10{sup 9} T/s, the double-layer structure of a conductor makes it possible to achieve higher magnetic induction at the conductor surface before it explodes. This can be accounted for, in particular, by the reduction of the ratio of the Joule heat density to the energy density of the magnetic field at the surface of a double-layer conductor due to redistribution of the current density over the conductor cross section.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of graphene nanoplatelet embedded polymer microcantilever for vapour phase explosive detection applications

In this work, a graphene based strain sensor has been reported for explosive vapour detection applications by exploiting the piezoresistive property of graphene. Instead of silicon based cantilevers, a low cost polymeric micro-cantilever platform has been used to fabricate this strain sensor by embedding the graphene nanoplatelet layer inside the beam. The fabricated devices were characterized for their mechanical and electromechanical behaviour. This device shows a very high gauge factor which is around ~144. Also the resonant frequency of these cantilevers is high enough such that the measurements are not affected by environmental noise. These devices have been used in this work for reliable detection of explosive vapours such as 2,4,6-Trinitrotoluene down to parts-per-billion concentrations in ambient conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of 2D nanoparticles with block structure in simultaneous electric explosion of conductors

A molecular dynamics simulation of nanoparticle formation in simultaneous electric explosion of conductors is performed. Interatomic interaction is described using potentials calculated in the framework of the embedded atom method. High-rate heating results in failure of the conductors with the formation of nanoparticles. The influence of the heating rate, temperature distribution over the specimen cross-section and the distance between simultaneously exploded conductors on the structure of formed nanoparticles is studied. The calculation results show that the electric explosion of conductors allows the formation of nanoparticles with block structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Explosive boiling of a metallic glass superheated by nanosecond pulse laser ablation

We report an explosive boiling in a Zr-based (Vitreloy 1) bulk metallic glass irradiated by a nanosecond pulse laser with a single shot. This critical phenomenon is accompanied by the ejection of high-temperature matter from the target and the formation of a liquid-gas spinodal pattern on the irradiated area. An analytical model reveals that the glassy target experiences the normal heating (melting) and significant superheating, eventually culminating in explosive boiling near the spinodal limit. Furthermore, the time lag of nucleation and the critical radius of vapor bubbles are theoretically predicted, which are in agreement with the experimental observations. This study provides the investigation on the instability of a metallic glass liquid near the thermodynamic critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of electro-explosion alloying with titanium diboride and treatment with pulsed electron beam in the surface modification of VT6 alloy

The paper presents the results of the investigation of VT6 titanium alloy subjected to electro-explosion alloying with TiB{sub 2} and irradiation with pulsed electron beam. It was established that electro-explosion alloying resulted in a high level of roughness of the surface layer with high adhesion of the modified layer and matrix. Further irradiation of the material with electron beam resulted in the smoothing of the surface of alloying and formation of a porous structure with various scale levels in the surface layer. It was also established that the energetic exposure causes the formation of a gradient structure with a changing elemental composition along the direction from the surface of alloying.

36 MATERIALS SCIENCE↗

Surface modification of Ti alloy by electro-explosive alloying and electron-beam treatment

By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT6 is carried out after electric explosion alloying with boron carbide and subsequent irradiation by pulsed electron beam. The formation of an electro-explosive alloying zone of a thickness up to 50 µm, having a gradient structure, characterized by decrease in the concentration of carbon and boron with increasing distance to the treatable surface has been revealed. Subsequent electron-beam treatment of alloying zone leads to smoothing of the alloying area surface and is accompanied by the multilayer structure formation at the depth of 30 µm with alternating layers with different alloying degrees having the structure of submicro - and nanoscale level.

36 MATERIALS SCIENCE↗

Ion-coincidence momentum imaging of three-body Coulomb explosion of formaldehyde in ultrashort intense laser fields

Three-body Coulomb explosion of formaldehyde (H{sub 2}CO) in intense 7- and 35-fs laser fields (1.3 × 10{sup 15} W/cm{sup 2}) has been investigated by using ion-coincidence momentum imaging technique. Two types of explosion pathways from the triply charged state, H{sub 2}CO{sup 3+} → (i) H{sup +} + H{sup +} + CO{sup +} and (ii) H{sup +} + CH{sup +} + O{sup +}, have been identified. It is shown from the momentum correlation of the fragment ions of pathway (i), that the geometrical structure of the molecule is essentially frozen along the H-C-H bending coordinate for the 7-fs case. On the other hand, for a longer pulse duration (35 fs), structural deformation along the C-H stretching and H-C-H bending coordinates is identified, which is ascribed to the nuclear dynamics in the dication states populated within the laser pulse duration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Emission current from a single micropoint of explosive emission cathode

Explosive emission cathodes (EECs) are widely used due to their large current. There has been much research on the explosive electron emission mechanism demonstrating that a current density of 10{sup 8}–10{sup 9 }A/cm{sup 2} is necessary for a micropoint to explode in several nanoseconds and the micropoint size is in micron-scale according to the observation of the cathode surface. This paper, however, makes an effort to research the current density and the micropoint size in another way which considers the space charge screening effect. Our model demonstrates that the relativistic effect is insignificant for the micropoint emission due to the small size of the micropoint and uncovers that the micron-scale size is an intrinsic demand for the micropoint to reach a space charge limited current density of 10{sup 8}–10{sup 9 }A/cm{sup 2}. Meanwhile, our analysis shows that as the voltage increases, the micropoint emission will turn from a field limited state to a space charge limited state, which makes the steady-state micropoint current density independent of the cathode work function and much less dependent on the electric field and the field enhancement factor than that predicted by the Fowler-Nordheim formula.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Invited Article: Quantitative imaging of explosions with high-speed cameras

Here, the techniques presented in this paper allow for mapping of temperature, pressure, chemical species, and energy deposition during and following detonations of explosives, using high speed cameras as the main diagnostic tool. Additionally, this work provides measurement in the explosive near to far-field (0-500 charge diameters) of surface temperatures, peak air-shock pressures, some chemical species signatures, shock energy deposition, and air shock formation.

47 OTHER INSTRUMENTATION↗

A numerical study of shock waves generated through laser ablation of explosives

Shock waves resulting from irradiation of energetic materials with a pulsed ultraviolet laser source have been shown to be an effective indicator for explosives detection. In this study, the features of shock wave propagation are explored theoretically. The initial stage of the shock motion is simulated as a one-dimensional process. As the nonlinear wave expands to form a blast wave, a system of conservation equations, simplified to the Euler equations, is employed to model wave propagation. The Euler equations are solved numerically by the 5th order weighted essentially non-oscillatory finite difference scheme with the time integration carried out using the 3rd order total variation diminishing Runge Kutta method. The numerical results for the shock wave evolution are compared with those obtained from experiments with a meltcast 2,6-dinitrotoluene sample. The calculations lay a theoretical foundation for a recently investigated technique for photoacoustically sensing explosives using a vibrometer.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗