Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Activity of Cu-Al-oxo extra-framework clusters for selective methane oxidation on Cu exchanged zeolites

Cu-zeolites are able to directly convert methane to methanol via a 3-step process using O2 as oxidant. Among the different zeolite topologies, Cu-exchanged mordenite (MOR) shows the highest methanol yields, attributed to a preferential formation of active Cu-oxo species in its 8-MR pores. The presence of extra-framework or partially detached Al species entrained in the micropores of MOR leads to the formation of nearly homotopic redox active Cu-Al-oxo nanoclusters with the ability to activate CH4. Studies of the activity of these sites together with characterization by 27Al NMR and IR spectroscopy leads to the conclusion that the active species are located in the 8-MR side pockets of MOR and it consists of two Cu ions and one Al linked by O. This Cu-Al oxo cluster shows an activity per Cu in methane oxidation significantly higher than of any previ-ously reported active Cu-oxo species. In order to determine unambiguously the structure of the active Cu-Al-oxo cluster, we combine experimental XANES of Cu K- and L- edges, Cu K-edge HERFD-XANES and Cu K-edge EXAFS with TDDFT and AIMD-assisted simulations. Our results provide evidence of a [Cu2AlO3]2+ cluster exchanged on MOR Al pairs that is able to oxidize up to two methane molecules per cluster at ambient pressure.

Methane oxidation, Cu L3-edge XANES, HERFD, TDDFT,↗

Experimental (XAS STEM TPR and XPS) and Theoretical (DFT) Characterization of Supported Rhenium Catalysts

A high surface area supported Re-based catalyst, fundamental to heterogeneous catalysis, is studied in the oxidic and reduced states using a combination of experimental (XAFS, STEM, TPR, and XPS) and theoretical (DFT and X-ray spectroscopy simulations) approaches. In the calcined dried catalyst, the Re species is present as an isolated trioxo(oxoaluminate) Re(VII) species. The temperature at which the Re undergoes reduction is a function of the hydrogen partial pressure and temperature ramp rate, but the maximum rate of reduction occurs in the range 300-400 C. Following reduction at 500 or 700 C in dry hydrogen, the Re is present as a mixture of species: unreduced trioxo(oxoaluminate) Re(VII) species, Re nanoclusters, and isolated Re atoms. By using a multifaceted approach, it is apparent that the majority species is an isolated Re adatom bound to the alumina support. DFT calculations identify several likely adsorption sites for these Re adatoms on the [110] surface of {gamma}-Al{sub 2}O{sub 3}. The final extended X-ray absorption fine structure (EXAFS) model taking into account these three species is used to identify the dominant adsorption site for Re on the alumina surface. FEFF8 X-ray absorption near-edge spectroscopy (XANES) calculations of unsupported and alumina-supported Re nanoclusters provide interpretation of the shape and edge position of the Re L{sub 3}-edge XANES after reduction. The presence of moisture during reduction stronly affects the mobility of the Re on the alumina leading to agglomeration. Subsequent air exposure of a reduced catalyst readily reoxidizes the reduced Re. The power of using a combination of analysis tools provides insight into the behavior of dispersed Re on supported alumina under oxidizing and reducing conditions relevant to heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon-Supported IrNi Core-Shell Nanoparticles: Synthesis Characterization and Catalytic Activity

We synthesized carbon-supported IrNi core-shell nanoparticles by chemical reduction and subsequent thermal annealing in H{sub 2}, and verified the formation of Ir shells on IrNi solid solution alloy cores by various experimental methods. The EXAFS analysis is consistent with the model wherein the IrNi nanoparticles are composed of two-layer Ir shells and IrNi alloy cores. In situ XAS revealed that the Ir shells completely protect Ni atoms in the cores from oxidation or dissolution in an acid electrolyte under elevated potentials. The formation of Ir shell during annealing due to thermal segregation is monitored by time-resolved synchrotron XRD measurements, coupled with Rietveld refinement analyses. The H{sub 2} oxidation activity of the IrNi nanoparticles was found to be higher than that of a commercial Pt/C catalyst. This is predominantly due to Ni-core-induced Ir shell contraction that makes the surface less reactive for IrOH formation, and the resulting more metallic Ir surface becomes more active for H{sub 2} oxidation. This new class of core-shell nanoparticles appears promising for application as hydrogen anode fuel cell electrocatalysts.

08 HYDROGEN↗

Electrochemical Kinetics and X-ray Absorption Spectroscopic Investigations of Oxygen Reduction on Chalcogen-Modified Ruthenium Catalysts in Alkaline Media

The oxygen reduction reaction (ORR) in alkaline media has been investigated on chalcogen-modified ruthenium nanoparticles (Ru/C, Se/Ru/C, Se/RuMo/C, S/Ru/C, S/RuMo/C) synthesized in-house via aqueous routes. In acidic medium, it is well known that modification by a chalcogen prevents the oxidation of the underlying transition-metal (Ru) surface, thereby promoting direct molecular O{sub 2} adsorption on the Ru metal. On an unmodified Ru catalyst in alkaline media, the surface oxides on Ru mediate the 2e{sup -} reduction of molecular O{sub 2} to a stable peroxide anion (HO{sub 2}{sup -}) intermediate via an outer-sphere electron-transfer mechanism. This increases the activity of HO{sub 2}{sup -} near the electrode surface and decreases the overpotential for ORR by effectively carrying out the reduction of HO{sub 2}{sup -} to OH{sup -} at the oxide-free ruthenium metal site. An increase in ORR activity of Ru is observed by modification with a chalcogen; however, the increase is not as significant as observed in acidic media. Ternary additives, such as Mo, were found to significantly improve the stability of the chalcogen-modified catalysts. Detailed investigations of the ORR activity of this class of catalyst have been carried out in alkaline media along with comparisons to acidic media wherever necessary. A combination of electrochemical and X-ray absorption spectroscopic (EXAFS, XANES, {Delta}{mu}) studies has been performed in order to understand the structure/property relationships of these catalysts within the context of ORR in alkaline electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitridation Temperature Effects on Electronic and Chemical Properties of (Ga 1-x Zn x )(N 1-x O x ) Solid Solution Nanocrystals

Solid solution nanocrystals of gallium nitride–zinc oxide have been realized as potential photocatalysts for visible light driven overall water splitting. The band gap of these materials has been found to narrow further into the visible region as a function of increasing zinc oxide concentration, and thus, it is desirable to synthesize zinc oxide-rich gallium nitride–zinc oxide solid solutions. In this paper, we discuss the effects of using nitridation temperature to control zinc oxide content on the electronic and chemical properties of gallium nitride–zinc oxide solid solution nanostructures. The effect of nitridation temperature was studied using X-ray absorption fine structure (XAFS), including both X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), and X-ray excited optical luminescence (XEOL). It was determined that using nitridation temperature as a method of controlling zinc oxide concentration results in solid solutions with poor crystallinity, phase separation, and mixed surface oxide formation. These findings suggest that many complications arise from using nitridation temperature to control zinc oxide concentration in gallium nitride–zinc oxide solid solutions, and thus, it is possible that the resultant materials would exhibit poor photocatalytic activity.

Ward, Matthew James↗

Local Structure, Electronic Behavior, and Electrocatalytic Reactivity of CO-Reduced Platinum-Iron Oxide Nanoparticles

A series of platinum–iron oxide nanoparticles was synthesized using a “clean” CO-reduction method that employed different ratios of Pt-Fe precursor salts in oleylamine at elevated temperatures. High-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDS) studies revealed that nearly monodisperse (i.e., with relative standard deviations of less than 15%) nanoparticles with mean diameters of 3.5–4.4 nm and varied elemental compositions (Pt 54 Fe 46 Pt 70 Fe 30 , and Pt 87 Fe 13 ) were obtained. X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) measurements at the Pt L 3 - and Fe K-edges revealed that these nanoparticles all consisted of a Pt core with amorphous iron oxide on the surface. Furthermore, it was observed that the local structure (e.g., Pt–Pt bond distance and coordination number) and electronic behavior of the Pt–FeO nanoparticles (e.g., Pt d electron density and Fe valence state) are dependent on the Pt-Fe precursor ratios used in their synthesis. Quantum mechanical ab initio calculations were employed to interpret the results from X-ray spectroscopy and help elucidate the relationships between local structure and electronic properties in the nanoparticle samples. Finally, the surface reactivity of these nanoparticles in the oxygen reduction reaction (ORR) was explored, demonstrating higher electrocatalytic activity for all three platinum–iron oxide samples in comparison with a commercial Pt catalyst. The surface reactivity was also found to be sensitive to the Pt-Fe ratios of the nanoparticles and could be correlated with their local structure and electronic behavior.

Duchesne, Paul N.↗

Investigation of the Structural Stability of Ion-Implanted Gd 2 Ti 2-x Sn x O 7 Pyrochlore-Type Oxides by Glancing Angle X-ray Absorption Spectroscopy

Rare-earth titanate and stannate pyrochlore-type oxides have been investigated in the past for the sequestration of nuclear waste elements because of their resistance to radiation-induced structural damage. In order to enhance this property, it is necessary to understand the effect of radioactive decay of the incorporated actinide elements on the local chemical environment. In this study, Gd 2 Ti 2–x Sn x O 7 materials have been implanted with Au– ions to simulate radiation-induced structural damage. Glancing angle X-ray absorption near-edge spectroscopy (GA-XANES), glancing angle X-ray absorption fine structure (GA-EXAFS) analysis, and powder X-ray diffraction have been used to investigate changes in the local coordination environment of the metal atoms in the damaged surface layer. Examination of GA-XANES/EXAFS spectra from the implanted Gd 2 Ti 2–x Sn x O 7 materials collected at various glancing angles allowed for an investigation of how the local coordination environment around the absorbing atoms changed at different depths in the damaged surface layer. This study has shown the usefulness of GA-XANES to the examination of ion-implanted materials and has suggested that Gd 2 Ti 2–x Sn x O 7 becomes more susceptible to ion-beam-induced structural damage with increasing Sn concentration.

Aluri, Esther Rani↗

Persistent Ion Pairing in Aqueous Hydrochloric Acid

For strong acids, like hydrochloric acid, the complete dissociation into an excess proton and conjugated base as well as the formation of independent solvated charged fragments is assumed. The existence of a chloride-Hyronium (Cl-H3O+) contact ion pairs even in moderate concentration hydrochloric acid (2.5 m) demonstrates that the counter ions do not behave merely as spectators. Through the use of modern extended X-ray absorption fine structure (EXAFS) measurements in conjunction with state-of-the-art density functional theory (DFT) simulations, we are able to obtain an unprecedented view into the molecular structure of medium to high concentrated electrolytes. Here we report that the Cl-H3O+ contact ion pair structure persists throughout the entire concentration range studied and that these structures differ significantly from moieties studied in micro-solvated hydrochloric acid clusters. Characterizing distinct populations of these ion pairs gives rise to a novel molecular level description of how to think about the activity of the proton that impacts our picture of the pH scale. Funding for CJM, GKS, and JLF was provided by DOE Office of Science, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences. Funding for MDB was provided throught the Laboratory Directed Research and Development program at Pacific Northwest National Laboratory. MB was funded through Argonne National Laboratory.

Baer, Marcel D.↗

Structural and Optical Interplay of Palladium-Modified TiO 2 Nanoheterostructure

The electronic structure and optical properties of Pd-modified TiO 2 nanotubes (NTs) with a vertically aligned nanotubular structure grown by a two-step electrochemical anodization method have been studied using X-ray spectroscopy. X-ray absorption near-edge structure (XANES) at the Ti L 3,2 - and O K-edges was used to investigate the TiO 2 NTs before and after Pd modification. It was found that Pd nanoparticles (NPs) are uniformly coated on the NT surface. The Pd L 3 -edge of the deposited Pd NPs shows a more intense whiteline and a blue shift for the Pd L 3 -edge absorption threshold relative to Pd metal, indicating charge depletion from the Pd 4d orbital as a result NP formation. The lattice of Pd is slightly contracted upon NP formation, although it remains fcc as revealed by extended X-ray absorption fine structure (EXAFS) analysis at the Pd K-edge. X-ray-excited optical luminescence (XEOL) together with XANES with element and site specificity was used to study the optical luminescence from TiO 2 NTs. It was found that the defect-originated XEOL intensity dropped noticeably in the Pd NP-coated NTs, suggesting a Pd NP–TiO 2 -interaction-mediated reduction in the radiative recombination of electrons and holes. Finally, further evidence is provided by Ti 2 p resonant inelastic X-ray scattering (RIXS), in which no low-energy loss features (d–d transitions) were observed. The implications of these results are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and chemical state of aluminum from the single- (K) and double-electron excitation (KL II&III , KL I ) x-ray absorption near-edge spectra of α-alumina, sodium aluminate, aqueous Al³⁺•(H₂O)₆, and aqueous Al(OH)₄⁻

We probe, at high energy resolution, the double electron excitation (KL II&II ) x-ray absorption region that lies approximately 115 eV above the main Al K-edge (1566 eV) of α-alumina and sodium aluminate. The two solid standards, α-alumina (octahedral) and sodium aluminate (tetrahedral) are compared to aqueous species that have the same Al coordination symmetries, Al³⁺•6H₂O (octahedral) and Al(OH)₄⁻ (tetrahedral). For the octahedral species, the edge height of the KL II&III -edge is approximately 10% of the main K-edge however the edge height is much weaker (3% of K-edge height) for Al species with tetrahedral symmetry. For the α-alumina and aqueous Al³⁺•6H₂O the KL II&III spectra contain white line features and extended absorption fine structure (EXAFS) that mimics the K-edge spectra. The KL II&III -edge feature interferes with an important region of the extended-XAFS region of the spectra for the K-edge of the crystalline and aqueous standards. The K-edge spectra and K-edge positions are predicted using time-dependent density functional theory (TDDFT). The TDDFT calculations for the K-edge XANES spectra reproduce the observed transitions in the experimental spectra of the four Al species. The KL II&III and KL I onsets and their corresponding chemical shifts for the four standards are estimated using the delta self-consistent field (ΔSCF) method. Research by JLF, NG, EJB, AV, TDS was supported by U.S. Department of Energy’s (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. NG thanks Amity Andersen for help with the α-Al₂O₃ and tetrahedral sodium aluminate (NaAlO₂) clusters. All the calculations were performed using the Molecular Science Computing Capability at EMSL, a national scientific user facility sponsored by the U.S. Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle under Contract # AC05-76RL01830.

aluminum↗

Catalytic Fe-xN sites in carbon nanotubes.

To reduce fuel cell cost, durable and inexpensive electrode catalysts need to be developed to replace precious metal materials, particularly for the electrocatalytic oxygen reduction at cathodes. In this study, we explored the structure and the energetics of Fe-xN (x = 2,4) incorporated into carbon nanotubes and graphene using density functional theory to show that these structures are more stable than iron atoms on nanotubes and that pyridinic structures of Fe-4N are more favorable than pyrrolic structures. EXAFS spectra simulated from the optimized structures show good agreement with results of measurements obtained on arrays of aligned nanotubes doped with iron and nitrogen, which have demonstrated activity toward oxygen-reduction reactions.

30 DIRECT ENERGY CONVERSION↗

Synthesis, Characterization, and Catalytic Performance of Highly Dispersed Co-SBA-15

Highly dispersed cobalt on SBA-15 was successfully prepared by a post synthesis grafting of cobalt. Of the cobalt precursors tested, Co(II) acetylacetonate was found to be the best source for high dispersion of cobalt. The Co-SBA-15 catalysts were characterized with different techniques: N2 physisorption, XRD, TPR, TEM, and X-ray adsorption analysis. The mesoporous structure of SBA-15 was retained after cobalt grafting with up to 10 wt % Co loading. There were no large cobalt oxide particles formed, which indicates all the cobalt ions are highly dispersed on the surface and the direct bonding to the silica surfaces results in a high reduction temperature (1123 K) relative to Co oxides. X-ray absorption analysis demonstrates a local structure of Co ions with all Co ions isolated and bonded with oxygen. XANES analysis requires that the local environment for Co ions be that of either a distorted tetrahedral or an octahedral structure and the fitting of EXAFS data further shows a Co-O bond coordination number of 3.58 {+-} 0.48, confirming that the Co is in a distorted tetrahedral environment. The catalytic activity of Co-SBA-15 catalyst was studied for the synthesis of carbon single walled nanotubes (SWNT). The high reduction stability of Co-SBA-15 is presumed to make a favorable catalyst for this high temperature reaction. Raman spectroscopy and TEM photographs show that good quality carbon SWNT was synthesized by Co-SBA-15. Moreover, Co-SBA-15 has a higher yield of carbon SWNT compared with Co-MCM-41 (C16 alkyl template) under the same reaction conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Particle size effect of hydride formation and surface hydrogen absorption of nanosized palladium catalysts : L{sub 3} edge vs K edge x-ray absorption spectroscopy.

The particle size effect on the formation of palladium hydride and on surface hydrogen adsorption was studied at room temperature using in situ X-ray absorption spectroscopy at the Pd K and L{sub 3} edges. Hydride formation was indirectly observed by lattice expansion in Pd K edge XANES spectra and by EXAFS analysis. Hydride formation was directly detected in the L{sub 3} edge spectra. A characteristic spectral feature caused by the formation of a Pd-H antibonding state showed strong particle size dependence. The L{sub 3} edge spectra were reproduced using full multiple scattering analysis and density of state calculations, and the contributions of bulk absorbed and surface hydrogen to the XANES spectra could be distinguished. The ratio of hydrogen on the surface versus that in the bulk increased with decreasing particle size, and smaller particles dissolved less hydrogen.

08 HYDROGEN↗

Structural and Architectural Evaluation of Bimetallic Nanoparticles: A Case Study of Pt−Ru Core−Shell and Alloy Nanoparticles

A comprehensive structural/architectural evaluation of the PtRu (1:1) alloy and Ru at Pt core-shell nanoparticles (NPs) provides spatially resolved structural information on sub-5 nm NPs. A combination of extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge structure (XANES), pair distribution function (PDF) analyses, Debye function simulations of X-ray diffraction (XRD), and field emission transmission electron microscopy/energy dispersive spectroscopy (FE-TEM/EDS) analyses provides complementary information used to construct a detailed picture of the core/shell and alloy nanostructures. The 4.4 nm PtRu (1:1) alloys are crystalline homogeneous random alloys with little twinning in a typical face-centered cubic (fcc) cell. The Pt atoms are predominantly metallic, whereas the Ru atoms are partially oxidized and are presumably located on the NP surface. The 4.0 nm Ru at Pt NPs have highly distorted hcp Ru cores that are primarily in the metallic state but show little order beyond 8 A. In contrast, the 1-2 monolayer thick Pt shells are relatively crystalline but are slightly distorted (compressed) relative to bulk fcc Pt. The homo- and heterometallic coordination numbers and bond lengths are equal to those predicted by the model cluster structure, showing that the Ru and Pt metals remain phase-separated in the core and shell components and that the interface between the core and shell is quite normal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Characterization, and Catalytic Properties of Novel Single-Site and Nanosized Platinum Catalysts

Novel single-site platinum catalysts have been synthesized by reacting platinum(II) organometallics with partially dehydroxylated silica. The resulting materials have been characterized by various methods such as IR, MAS NMR, and EXAFS. Further, the single-site platinum catalysts were calcined in air to remove the ligand and produce nanosized platinum particles, that were characterized by TEM and H{sub 2} chemisorption. All catalysts were tested for the hydrogenation of toluene. The single-site platinum catalysts were less active than a commercial Pt/SiO{sub 2} catalyst with comparable platinum loading, and this has been ascribed to ligand effects. Conversely, the nanosized platinum catalysts were more active than the commercial Pt/SiO{sub 2} catalyst due to their high dispersion and small particle sizes.

36 MATERIALS SCIENCE↗

Iron mineral dissolution releases iron and associated organic carbon during permafrost thaw

It has been shown that reactive soil minerals, specifically iron(III) (oxyhydr)oxides, can trap organic carbon in soils overlying intact permafrost, and may limit carbon mobilization and degradation as it is observed in other environments. However, the use of iron(III)-bearing minerals as terminal electron acceptors in permafrost environments, and thus their stability and capacity to prevent carbon mobilization during permafrost thaw, is poorly understood. We have followed the dynamic interactions between iron and carbon using a space-for-time approach across a thaw gradient in Abisko (Sweden), where wetlands are expanding rapidly due to permafrost thaw. We show through bulk (selective extractions, EXAFS) and nanoscale analysis (correlative SEM and nanoSIMS) that organic carbon is bound to reactive Fe primarily in the transition between organic and mineral horizons in palsa underlain by intact permafrost (41.8 ±10.8 mg carbon per g soil, 9.9 to 14.8% of total soil organic carbon). During permafrost thaw, water-logging and O 2 limitation lead to reducing conditions and an increase in abundance of Fe(III)-reducing bacteria which favor mineral dissolution and drive mobilization of both iron and carbon along the thaw gradient. By providing a terminal electron acceptor, this rusty carbon sink is effectively destroyed along the thaw gradient and cannot prevent carbon release with thaw.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗