Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Doubling method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

A mirror mount for cryogenic environments

The finite element method was used to study the effect of mount-induced aberrations on the optical surface of a lightweight double arch mirror subjected to cryogenic temperatures. The mount design was controlled by the requirements imposed on the optical surface quality and stress levels. The finite element analysis was used to define the feasible range of mount parameters and the selection of a design within the feasible region. The final design consisted of three spring-loaded Invar T-clamps that uniquely define the location of the mirror, three radially compliant parallel spring guides that remove the effect of radial contraction of structure in cryogenic temperatures, and a flexible baseplate that was used to reduce the effect of temperature-induced baseplate tilt errors. The experimental results from the application of this system to an existing 20-inch fused silica double arch mirror are shown, and possible improvements in system performance are discussed.

Iraninejad, B.↗

A light-trapping solar cell coverglass

A novel method of reducing surface reflectivity which eliminates the need to texturize the surface of the cell is presented. A double light pass is achieved by using a light-trapping coverglass which redirects reflected light back to the cell surface by total internal reflection. This technique allows low-reflectance surfaces to be used on planar solar cells, including GaAs and InP, with the benefit of increasing the possible short-circuit current (and hence the efficiency) by 6 to 10 percent with no additional steps added to the cell manufacturing process. The coverglass design also has applications to reduction of grid shadowing and to light trapping within the cell.

Landis, Geoffrey A.↗

Micromechanics Analysis Code (MAC) User Guide: Version 1.0

The ability to accurately predict the thermomechanical deformation response of advanced composite materials continues to play an important role in the development of these strategic materials. Analytical models that predict the effective behavior of composites are used not only by engineers performing structural analysis of large-scale composite components but also by material scientists in developing new material systems. For an analytical model to fulfill these two distinct functions it must be based on a micromechanics approach which utilizes physically based deformation and life constitutive models and allows one to generate the average (macro) response of a composite material given the properties of the individual constituents and their geometric arrangement. Here the user guide for the recently developed, computationally efficient and comprehensive micromechanics analysis code, MAC, who's predictive capability rests entirely upon the fully analytical generalized method of cells, GMC, micromechanics model is described. MAC is a versatile form of research software that 'drives' the double or triple ply periodic micromechanics constitutive models based upon GMC. MAC enhances the basic capabilities of GMC by providing a modular framework wherein (1) various thermal, mechanical (stress or strain control), and thermomechanical load histories can be imposed; (2) different integration algorithms may be selected; (3) a variety of constituent constitutive models may be utilized and/or implemented; and (4) a variety of fiber architectures may be easily accessed through their corresponding representative volume elements.

Wilt, T. E.↗

Micromechanics Analysis Code (MAC). User Guide: Version 2.0

The ability to accurately predict the thermomechanical deformation response of advanced composite materials continues to play an important role in the development of these strategic materials. Analytical models that predict the effective behavior of composites are used not only by engineers performing structural analysis of large-scale composite components but also by material scientists in developing new material systems. For an analytical model to fulfill these two distinct functions it must be based on a micromechanics approach which utilizes physically based deformation and life constitutive models and allows one to generate the average (macro) response of a composite material given the properties of the individual constituents and their geometric arrangement. Here the user guide for the recently developed, computationally efficient and comprehensive micromechanics analysis code's (MAC) who's predictive capability rests entirely upon the fully analytical generalized method of cells (GMC), micromechanics model is described. MAC is a versatile form of research software that 'drives' the double or triply periodic micromechanics constitutive models based upon GMC. MAC enhances the basic capabilities of GMC by providing a modular framework wherein (1) various thermal, mechanical (stress or strain control) and thermomechanical load histories can be imposed, (2) different integration algorithms may be selected, (3) a variety of constituent constitutive models may be utilized and/or implemented, and (4) a variety of fiber and laminate architectures may be easily accessed through their corresponding representative volume elements.

Wilt, T. E.↗

DSMC Simulation of Separated Flows About Flared Bodies at Hypersonic Conditions

This paper describes the results of a numerical study of interacting hypersonic flows at conditions that can be produced in ground-based test facilities. The computations are made with the direct simulation Monte Carlo (DSMC) method of Bird. The focus is on Mach 10 flows about flared axisymmetric configurations, both hollow cylinder flares and double cones. The flow conditions are those for which experiments have been or will be performed in the ONERA R5Ch low-density wind tunnel and the Calspan-University of Buffalo Research Center (CUBRC) Large Energy National Shock (LENS) tunnel. The range of flow conditions, model configurations, and model sizes provides a significant range of shock/shock and shock/boundary layer interactions at low Reynolds number conditions. Results presented will highlight the sensitivity of the calculations to grid resolution, contrast the differences in flow structure for hypersonic cold flows and those of more energetic but still low enthalpy flows, and compare the present results with experimental measurements for surface heating, pressure, and extent of separation.

Moss, James N.↗

Seismic Elastic Double-Beam Characterization of Faults and Fractures for CO₂ Storage Site Selection

Site characterization for underground injection and storage of gigatonne-scale CO₂ requires reliable and cost-effective methods to detect and characterize faults and fractures and to assess their stress state and fault activation potential. This is critical, as wastewater injection and disposal have been shown to activate faults and induce earthquakes, and CO₂ leakage remains a key concern for long-term storage. In this project, we developed seismic methods to detect and characterize large-scale sedimentary and crystalline basement faults and associated small-scale fractures below conventional seismic imaging resolution using multicomponent (9C) surface seismic data. Machine learning was used to automatically interpret large-scale faults, providing key information for estimating the maximum magnitude of potential induced earthquakes. High-fidelity imaging was achieved by exploiting redundancy across multiple elastic wave modes, where independent images from different modes and frequencies cross-validate each other. We also used our nonlinear signal comparison (NLSC) method for ground roll removal, improving data quality in complex near-surface conditions. The methods were validated using field data acquired in central Montana. Results show that basement faults extend into the sedimentary section and that small-scale fractures are widespread above the basement. The inferred stress orientation is consistent with regional stress data, and the estimated maximum induced earthquake magnitude is small (Mw ~2.3). The developed workflow provides a practical approach for fault and fracture characterization and for assessing induced seismicity and leakage risk. It is directly applicable to CO₂ storage site selection and to other subsurface systems.

02 PETROLEUM↗

Connected three-body terms in single-reference unitary many-body theories: Iterative and perturbative approximations

This work introduces various approaches to include connected three-body terms in unitary many-body theories, focusing on the driven similarity renormalization group (DSRG). Starting from the least approximate method—the linearized DSRG truncated to one-, two-, and three-body operators [LDSRG(3)]—we develop several approximate LDSRG(3) models with reduced computational cost. Through a perturbative analysis, we motivate a family of iterative LDSRG(3)-n and -n' (n = 1, 2, 3, 4) methods that contain a subset of the LDSRG(3) diagrams. Among these variants, the LDSRG(3)-2 scheme has the same computational complexity of coupled cluster theory with singles, doubles, and triples (CCSDT), but it outperforms CCSDT in the accuracy of the predicted correlation energies. We also propose and implement two perturbative triples corrections based on the linearized DSRG truncated to one- and two-body operators augmented with recursive semi-quadratic commutators [qDSRG(2)]. Overall, the resulting qDSRG(2)+(T) approach matches the accuracy of the “gold-standard” coupled cluster theory with singles, doubles, and perturbative triples model on the energetics of twenty-eight closed-shell atoms and small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nebular Models of Sub-Chandrasekhar Mass Type Ia Supernovae: Clues to the Origin of Ca-rich Transients

In this work we use non-local thermal equilibrium radiative transport modeling to examine observational signatures of sub-Chandrasekhar mass double detonation explosions in the nebular phase. Results range from spectra that look like typical and subluminous Type Ia supernovae (SNe) for higher mass progenitors to spectra that look like Ca-rich transients for lower mass progenitors. This ignition mechanism produces an inherent relationship between emission features and the progenitor mass as the ratio of the nebular [Ca II ]/[Fe III ] emission lines increases with decreasing white dwarf mass. Examining the [Ca II ]/[Fe III ] nebular line ratio in a sample of observed SNe we find further evidence for the two distinct classes of SNe Ia identified in Polin et al. by their relationship between Si ii velocity and B-band magnitude, both at time of peak brightness. This suggests that SNe Ia arise from more than one progenitor channel, and provides an empirical method for classifying events based on their physical origin. Furthermore, we provide insight to the mysterious origin of Ca-rich transients. Low-mass double detonation models with only a small mass fraction of Ca (1%) produce nebular spectra that cool primarily through forbidden [Ca II ] emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical solution of the vertical structure equation in the normal mode method

In the present model of multilayered stability stratification, aimed at obtaining the analytic eigensolutions of the vertical structure equation, each layer is characterized by its own static stability value. By requiring continuity of pressure and vertical velocity across each interface level, and by imposing suitable upper and lower boundary conditions, matching eigensolutions are obtained in terms of the Bessel functions. Attention is given to an explicit example of a double-layered stratified atmosphere which demonstrates the mathematical manipulations involved; the resultant vertical structure functions are used to check the accuracy of the numerical solutions by the finite difference and finite element methods.

Sasaki, Y. K.↗

A study of the vortex flow over 76/40-deg double-delta wing

A low-speed wind-tunnel study of the flow about a 76/40-deg double-delta wing is described for angles of attack ranging from -10 to 25 deg and Reynolds numbers ranging from 0.5 to 1.5 Million. The study was conducted to provide data for the purpose of understanding the vortical flow behavior and for validating Computational Fluid Dynamics methods. Flow visualization tests have provided insight into the effect of the angle of attack and Reynolds number of the vortex-dominated flow both on and off of the surface of the double-delta wing. Upper surface pressure recordings from pressure orifices and Pressure Sensitive Paint have provided data on the pressures induced by the vortices. Flowfield surveys were carried out at an angle of attack of 10 deg by using a thin 5-hole probe. Numerical solutions of the compressible thin-layer Navier-Stokes equations were conducted and compared to the experimental data.

Verhaagen, N. G.↗

A fast numerical solution of scattering by a cylinder: Spectral method for the boundary integral equations

It is known that the exact analytic solutions of wave scattering by a circular cylinder, when they exist, are not in a closed form but in infinite series which converges slowly for high frequency waves. In this paper, we present a fast number solution for the scattering problem in which the boundary integral equations, reformulated from the Helmholtz equation, are solved using a Fourier spectral method. It is shown that the special geometry considered here allows the implementation of the spectral method to be simple and very efficient. The present method differs from previous approaches in that the singularities of the integral kernels are removed and dealt with accurately. The proposed method preserves the spectral accuracy and is shown to have an exponential rate of convergence. Aspects of efficient implementation using FFT are discussed. Moreover, the boundary integral equations of combined single and double-layer representation are used in the present paper. This ensures the uniqueness of the numerical solution for the scattering problem at all frequencies. Although a strongly singular kernel is encountered for the Neumann boundary conditions, we show that the hypersingularity can be handled easily in the spectral method. Numerical examples that demonstrate the validity of the method are also presented.

Hu, Fang Q.↗

Overlapping Conditions in IMPACT

Introduction The IMPACT 1.0 model assumes independence of 119 different medical conditions. That is, it is assumed that one medical event maps to a single medical condition. However, it is often the case that a single medical event may lead to several different concurrent conditions (e.g., a single accident resulting in multiple fractures, chest/abdominal trauma, and sepsis). There is a significant overlap between many of the conditions in ICL 1.0. For example, depression and anxiety are two separate conditions but often co-exist. This overlap may lead to an overestimation in the incidence calculation. In future iterations of the model, we plan to address progression of medical conditions. Methods There are two possible methods to approach progression of a medical condition. The first is to take any medical condition in ICL, calculate its incidence and determine its outcomes no matter what sequelae occur. For example, calculate the incidence of prostatitis and determine its metrics (e.g., loss of crew life, risk of medical evacuation or task time affected) no matter what the sequelae might be (sepsis, hydronephrosis, renal failure, etc.). The second approach is to take any medical condition in the ICL and calculate the outcomes based on transitions to any other condition. For example, calculate the incidence of nephrolithiasis and determine the incidence of each possible transition (e.g., hydronephrosis, renal failure, UTI, pyelonephritis, sepsis) and then determine its metrics. With perfectly informative evidence, the answers should be the same using either method. The question is which approach best reduces the opportunity for overlapping. Results The team identified 31 conditions that were the most likely to transition to a secondary condition such as sepsis and respiratory failure. It was felt that the first approach, as described above, would be the easiest to implement and would have the greatest reduction in overlapping conditions. The identified conditions were primarily infectious conditions, like UTI and pneumonia (which could lead to both respiratory failure and sepsis), toxic inhalations, cardiac arrest, seizures, and trauma. Once these conditions were identified, the conditions were divided between the four clinicians on the team to identify those that were not consistent with the others in way they were approached. There were 13 conditions that were found to be problematic. Some condition definitions needed to be changed to eliminate references to transitions or to update them in cases where the definitions were out of date. Some conditions required new evidence to correct the loss of crew life, and one condition was felt to have so much overlap that it was recommended for elimination. A second effort required modification of the sepsis incidence calculation to prevent double counting of the conditions, such as prostatitis, that could progress to sepsis. Conclusion The team made significant progress in clarifying the method for dealing with transitions from one medical condition to another. In addition, errors were found and corrected in definitions, incidence, and loss of crew life as well as a condition in which reference was made to a CLiFF that was no longer included. These modifications will provide greater fidelity in the IMPACT model and reduce overlap.

Arian Anderson↗

Quantifying clustered DNA damage induction and repair by gel electrophoresis, electronic imaging and number average length analysis

Assessing DNA damage induction, repair and consequences of such damages requires measurement of specific DNA lesions by methods that are independent of biological responses to such lesions. Lesions affecting one DNA strand (altered bases, abasic sites, single strand breaks (SSB)) as well as damages affecting both strands (clustered damages, double strand breaks) can be quantified by direct measurement of DNA using gel electrophoresis, gel imaging and number average length analysis. Damage frequencies as low as a few sites per gigabase pair (10(9)bp) can be quantified by this approach in about 50ng of non-radioactive DNA, and single molecule methods may allow such measurements in DNA from single cells. This review presents the theoretical basis, biochemical requirements and practical aspects of this approach, and shows examples of their applications in identification and quantitation of complex clustered damages.

NASA Program Biological Systems Research↗

A novel method of testing the shear strength of thick honeycomb composites

Sandwich composites of aluminum and glass/phenolic honeycomb core were tested for shear strength before and after impact damage. The assessment of shear strength was performed in two ways; by four point bend testing of sandwich beams and by a novel double lap shear (DLS) test. This testing technique was developed so smaller specimens could be used, thus making the use of common lab scale fabrication and testing possible. The two techniques yielded similar data. The DLS test gave slightly lower shear strength values of the two methods but were closer to the supplier's values for shear strength.

Hodge, A. J.↗

Developing new analysis tools for near surface radio-based neutrino detectors

The ARIANNA experiment is an Askaryan radio detector designed to measure high-energy neutrino induced cascades within the Antarctic ice. Ultra-high-energy neutrinos above 10 16 eV have an extremely low flux, so experimental data captured at trigger level need to be classified correctly to retain as much neutrino signal as possible. We first describe two new physics-based neutrino selection methods, or "cuts", (the updown and dipole cut) that extend the previously published analysis to a specialized ARIANNA station with 8 antenna channels, which is double the number used in the prior analysis. For a standard trigger with a threshold signal to noise ratio at 4.4, the new cuts produce a neutrino efficiency of > 95% per station-year of operation, while rejecting 99.93% of the background (corresponding to 53 remaining experimental background events). When the new cuts are combined with a previously developed cut using neutrino waveform templates, all background is removed at no change of efficiency. In addition, the neutrino efficiency is extrapolated to 1,000 station-years of operation, obtaining 91%. This work then introduces a new selection method (the deep learning cut) to augment the identification of neutrino events by using deep learning methods and compares the efficiency to the physics-based analysis. The deep learning cut gives 99% signal efficiency per station-year of operation while rejecting 99.997% of the background (corresponding to 2 remaining experimental background events), which are subsequently removed by the waveform template cut at no significant change in efficiency. Here the results of the deep learning cut were verified using measured cosmic rays which shows that the simulations do not introduce artifacts with respect to experimental data. The paper demonstrates that the background rejection and signal efficiency of near surface antennas meets the requirements of a large scale future array, as considered in baseline design of the radio component of IceCube-Gen2.

97 MATHEMATICS AND COMPUTING↗

Benchmarking third-order cluster perturbation theory for electronically excited states

In this study, we investigate the reliability of cluster perturbation (CP) theory applied to the calculation of electronically excited states through a comprehensive benchmark. In CP theory, perturbative corrections are added to the properties of a parent excitation space, which converge toward the properties of a target excitation space. For the CPS(D-n) model, perturbative corrections through order n are added to the coupled cluster singles (CCS) excitation energies to target the coupled cluster singles and doubles (CCSD) excitation energies. Through a comparative analysis of excitation energy calculations across a diverse set of molecules and wavefunction methods, we present a comprehensive evaluation of the accuracy of the third-order CPS(D) model, CPS(D-3), in calculating excitation energies. Further, our findings demonstrate that CPS(D-3) is a reliable alternative to established methods, particularly CCSD, while systematically overestimating the excitation energies compared to high-level coupled cluster methods such as CC3. These results highlight the strengths and limitations of CPS(D-3), as well as the promising directions for its future development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variational quantum eigensolver for approximate diagonalization of downfolded Hamiltonians using generalized unitary coupled cluster ansatz

In this paper we discuss the utilization of Variational Quantum Solver (VQE) and recently introduced Generalized Unitary Coupled Cluster (GUCC) formalism for the diagonalization of downfolded/effective Hamiltonians in active spaces. In addition to effective Hamiltonians defined by the downfolding of a subset of virtual orbitals we also consider their form defined by freezing core orbitals, which enables us to deal with larger systems. Furthermore, we also consider various solvers to identify solutions of the GUCC equations. We use N 2 , H 2 O, and C 2 H 4 , and benchmark systems to illustrate the performance of the combined framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗