Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOUG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Evaluation of HFC 245ca and HFC 236ea as foam blowing agents

Hydrochlorofluorocarbon (HCFC) 141b has been selected as the interim blowing agent for use in urethane insulations on NASA's Space Shuttle External Tank. Due to the expected limited commercial lifetime of this material, research efforts at the NASA Thermal Protection Systems Materials Research Laboratory at the Marshall Space Flight Center are now being devoted to the identification and development of alternatives with zero ozone depletion potential. Physical blowing agents identified to date have included hydrocarbons, fluorocarbons, hydrofluoroethers, and more predominantly, hydrofluorocarbons (HFCs). The majority of the HFC evaluations in industry have focused on the more readily available, low boiling candidates such as HFC 134a. Higher boiling HFC candidates that could be handled at ambient conditions and use current processing equipment would be more desirable. This paper will describe results from a research program of two such candidate HFC's performed as a cooperative effort between Martin Marietta Manned Space Systems, the U.S. Environmental Protection Agency, and Oak Ridge National Laboratories. The purpose of this effort was to perform a cursory evaluation of the developmental HFC's 245ca and 236ea as blowing agents in urethane based insulations. These two materials were selected from screening tests of 37 C2, C3, and C4 isomers based on physical properties, atmospheric lifetime, flammability, estimated toxicity, difficulty of synthesis, suitability for dual use as a refrigerant, and other factors. Solubility of the two materials in typical foam components was tested, pour foaming trials were performed, and preliminary data were gathered regarding foam insulation performance.

Sharpe, Jon↗

Use of arm measurements to improve radiative transfer models used in climate models

The demands of accurate predictions of radiative transfer for climate applications are well-documented. While much effort is being devoted to evaluating the accuracy of the GCM radiative transfer schemes, the problem of developing accurate, computationally efficient schemes for climate models still remains. This paper discusses our efforts in developing accurate and fast computational methods for global and regional climate models.

Bergstrom, Robert W.↗

Photoevaporation of disks around massive stars and application to ultracompact H II regions

Young massive stars produce sufficient Lyman continuum photon luminosity Phi(sub i) to significantly affect the structure and evolution of the accretion disks surrounding them. A nearly static, ionized, isothermal 10(exp 4) K atmosphere forms above the neutral disk for disk radii r less than r(sub g) = 10(exp 15) M(sub 1) cm, where M(sub *) = 10 solar mass M(sub 1) is the stellar mass. For r approximately greater than r(sub g) the diffuse field created by hydrogen recombinations to the ground state in the photoionized gas above the disk produces a steady evaporation at the surface of the disk, and this H II gas flows freely out to the ISM (the 'disk wind'). The detailed structure depends on the mass-loss rate dot-M(sub w) of the fast, approximately greater than 1000 km/sec, stellar wind from the massive star. A critical mass-loss rate dot-M(sub cr) is defined such that the ram pressure of the stellar wind equals the thermal pressure of the H II atmosphere at r(sub g). In the weak stellar wind solution, dot-M(sub w) less than dot-M(sub cr), the diffuse photons from the atmosphere above r(sub g) produce a photoevaporative mass-loss rate from the disk at r approximately greater than r(sub g) of order 1 x 10(exp -5)(Phi(sub 49))(exp 1/2)(M(sub 1))(exp 1/2) solar mass/year, where Phi(sub i) = 10(exp 49) Phi(sub 49)/sec. The resulting slow (10 to 50 km/sec) ionized outflow, which persists for approximately greater than 10(exp 5) year for disk masses M(sub d) approximately 0.3 M(sub *), may explain the observational characteri stics of unresolved, ultracompact H II regions. In the strong stellar wind solution, dot-M(sub w) greater than dot-M(sub cr), the ram pressure of the stellar wind blows down the atmosphere for r less than r(sub g) and allows the stellar photons to penetrate to greater radii and smaller heights. A slow, ionized outflow produced mainly by diffuse photons is again created for r less than r(sub g); however, it is now dominated by the flow at r(sub w)(greater than r(sub g)), the radius at which the stellar wind ram pressure equals the thermal pressure in the evaporating flow. The mass-loss rate from the disk is of order 6 x 10(exp -5)dot-M(sub w-6) v(sub w8)(Phi (sub 49))(exp -1/2) solar mass/year, where dot-M(sub w-6) = M(sub w)/10(exp -6) solar mass/year and v(sub w8) = v(sub w)/1000 km/sec is the stellar wind velocity. The resulting outflow, which also persists for approximately greater than 10(exp 5) year may explain many of the more extended (r approximately greater than 10(exp 16) cm) ultracompact H II regions. Both the weak-wind and the strong-wind models depend entirely on stellar parameters Phi(sub i), M(sub *), dot-M(sub w)) and are independent of disk parameters as long as an extended r much greater than (r(sub g)), neutral disk exists. We compare both weak-wind and strong-wind model results to the observed radio free-free spectra and luminosities of ultracompact H II regions and to the interesting source MWC 349.

Hollenbach, David↗

The masses of V838 Herculis (Nova Herculis 1991) and OZ Aurigae

We have determined H alpha radial velocity solutions for the two eclipsing novae V838 Her (Nova Her 1991) and QZ Aur, which yields mass estimates for the stellar components. The results indicate both objects have relatively massive white dwarfs greater than 0.62 solar mass for V838 Her and greater than 0.65 solar mass for QZ Aur), although these limits allow lower masses than theoretical models for fast novae predict. Even though both novae have long periods (7.14 hr and 8.58 hr), there is no visible evidence of the secondary star in the spectrum. The large extent and brightness of the accretion disk, as deduced from the light curves, make the disk the dominant source of light.

Szkody, Paula↗

The richness of the globular cluster system of NGC 3923: Clues to elliptical galaxy formation

We present new data on the globular cluster system of the elliptical galaxy NGC 3923 which show that it has the most globular clusters per unit luminosity of any noncluster elliptical yet observed, with S(sub N) = 6.4 +/- 1.4. NGC 3923 is also among the brightest ellipticals outside of a galaxy cluster for which the number of globular clusters has been determined. Our observation of a large number of clusters per unit luminosity (high S(sub N)-value) for a bright elliptical in a sparse environment is consistent with the suggestion of Djorgovski and Santiago that the number of globular clusters is a power-law function of the luminosity with an exponent greater than 1. We relate this higher specific frequency of globular clusters in more luminous galaxies to other observations which indicate that the physical conditions within elliptical galaxies at the time of their formation were dependent on galaxy mass.

Zepf, Stephen E.↗

Constraints on the formation history of the elliptical galaxy NGC 3923 from the colors of its globular clusters

We present a study of the colors of globular clusters associated with the elliptical galaxy NGC 3923. Our final sample consists of Wasington system C and T(sub 1) photometry for 143 globular cluster candidates with an expected contamination of no more than 10%. We find that the color distribution of the NGC 3923 globular cluster system (GCS) is broad and appears to have at least two peaks. A mixture modeling analysis of the color distribution indicates that a two-component model is favored over a single-component one at a high level of confidence (greater than 99%). This evidence for more than one population in the GCS of NGC 3923 is similar to that previously noted for the four other elliptical galaxies for which similar data have been published. Furthermore, we find that the NGC 3923 GCS is redder than the GCSs of previously studed elliptical galaxies of similar luminosity. The median metallicity inferred from our (C-(T(sub 1)))(sub 0) colors is (Fe/H)(sub med) = -0.56, with an uncertainty of 0.14 dex arising from all sources of uncertainty in the mean color. This is more metal rich than the median metallicity found for the GCS of M87 using the same method, (Fe/H)(sub med) = -0.94. Since M87 is more luminous than NGC 3923, this result points to significant scatter about any trend of higher GCS metallicity with increasing galaxy luminosity. We also show that there is a color gradient in the NGC 3923 GCS corresponding to about -0.5 dex in Delta(Fe/H)/Delta(log r). We conclude that the shape of the color distribution of individual GCSs and the variation in mean color among the GCSs of ellipticals are difficult to understand if elliptical galaxies are formed in a single protogalactic collapse. Models in which ellipticals and their globular clusters are formed in more than one event, such as a merger scenario, are more successful in accounting for these observations.

Zepf, Stephen E.↗

Improved Controllers For Heaters In Toxic-Gas Combustors

Commercial electronic proportional controllers installed in place of mechanical power controllers for electric heaters in toxic-gas combustors at NASA's Jet Propulsion Laboratory. Designed to maintain temperature of heater at preset value by turning power fully on or fully off when temperature falls below or rises above that value, respectively. Solid-state power controllers overcome deficiencies of mechanical power controllers.

Wishard, James↗

Swivel Total-Temperature Probe

Improved probe designed to be mounted at wingtip of airplane and used for measuring total temperature of air when airplane flies at high angles of attack. Four fins and swivel mount enable probe to align itself aerodynamically with local flow of air. Thus, stagnated-flow condition needed for accurate measurement of total temperature achieved.

Moes, Tim↗

Digital Radio Broadcasting using the mixed satellite/terrestrial approach: An application study

Digital radio broadcasting (DRB) is a new service that offers CD quality stereo programs to fixed, portable and mobile receivers. Terrestrial DRB in Canada is considered as a replacement technology for existing AM and FM services, and it is expected to start up in 1996. Canada currently favors Eureka 147 technology operating in the L-band, in the 1452-1492 MHz frequency band allocated during WARC'92 for DRB. Terrestrial DRB delivery is appropriate for small to medium sized service areas, such as cities and their associated suburbs. For larger areas such as provinces, as well as for sparsely populated areas such as the regions in northern Canada, satellite delivery is more appropriate. The mixed approach is based on both satellite and terrestrial broadcasting services using a common frequency band. Spectrum efficiency is achieved through close coordination of both service types, to achieve proper frequency sharing and spectrum re-use. As well, use of a common transmission format by both types of services allows for a common receiver. This mixed satellite/terrestrial approach to DRB is being seriously considered in Canada and in other countries. This paper studies the feasibility of such a mixed satellite/terrestrial DRB system. It looks at possible coverage scenarios for Canada, and at the satellite and receiver technology requirements.

Paiement, Richard V.↗

FDEMS Sensing for Automated Intelligent Processing of PMR-15

The purpose of this grant was to develop frequency dependent dielectric measurements, often called FDEMS (frequency dependent electromagnetic sensing), to monitor and intelligently control the cure process in PMR-15, a stoichiometric mixture of a nadic ester, dimethyl ester, and methylendianiline in a monomor ratio.

Kranbuehl, David E.↗

The cornerstone of data warehousing for government applications

The purpose of this paper is to discuss data warehousing storage issues and the impact of EMC open storage technology for meeting the myriad of challenges government organizations face when building Decision Support/Data Warehouse system.

Kenbeek, Doug↗

Advanced Dependent Pressure Vessel (DPV) Nickel-Hydrogen Spacecraft Cell and Battery Design

The dependent pressure vessel (DPV) nickel-hydrogen (Ni-H2) battery is being developed as a potential spacecraft battery design for both military and commercial satellites. Individual pressure vessel (IPV) Ni-H2 batteries are currently flying on more than 70 Earth-orbiting satellites and have accumulated more that 140,000,000 cell-hours in actual spacecraft operation. The limitations of standard Ni-H2 IPV flight battery technology are primarily related to the internal cell design and the battery packaging issues associated with grouping multiple cylindrical cells. The DPV cell design offers higher specific energy and reduced cost, while retaining the established IPV Ni-H2 technology flight heritage and database. A design performance analysis is presented at both the cell and battery level. The DPV is capable of delivering up to 76 Watthours per kilogram (Wh/kg) at the cell level and 70 Wh/kg at the full battery level. This represents a 40 percent increase in specific energy at the cell level and a 60 percent increase in specific energy at the battery level compared to current IPV Ni-H2 technology.

Dwaine K Coates↗

Emission Spectral Measurements in the Plenum of an Arc Jet Wind Tunnel

Arc jet wind tunnel facilities are used to evaluate thermal protection system materials for re-entry vehicles. The high speed, high temperature flowfield generated by the arc jet can simulate the extreme aerodynamic heating environment experienced during re-entry so that the survivability of heat shield materials and performance of various designs options can be tested. Although the re-entry heating environment can be approximated in the arc jet facility, the flowfield only partially simulates the actual re-entry flight conditions. Reynolds numbers are not matched so that surface shear stress distributions and mass transfer rates due to ablation or other mechanisms are not modeled correctly. Unlike flight conditions the arc freestream air is in non-equilibrium because of the rapid expansion that occurs in the supersonic nozzle. To properly study the actual re-entry flow environment, computational fluid dynamics, computational chemistry and radiation models must be used. Arc jet tunnel tests serve to validate these models. To perform accurate simulations inlet and boundary-conditions are needed, which come from measurements of the flowfield. The present study is concerned with measurements in the plenum region of an arc heater. In the past, conditions in the arc heater flowfield have been predicted using simulations since conventional measurement techniques could not be used in the harsh extremely high temperature environment. The present study is part of a recent push to utilize optical techniques to help better characterize the arc jet flowfields. Emission measurements have been made in the shock layer and the constrictor section of the arc heater to determine temperatures and species number densities. LIF measurements have been made in the free stream to determine temperature and velocity.

Donohue, Jim↗

Spacecraft control center automation using the generic inferential executor (GENIE)

The increasing requirement to dramatically reduce the cost of mission operations led to increased emphasis on automation technology. The expert system technology used at the Goddard Space Flight Center (MD) is currently being applied to the automation of spacecraft control center activities. The generic inferential executor (GENIE) is a tool which allows pass automation applications to be constructed. The pass script templates constructed encode the tasks necessary to mimic flight operations team interactions with the spacecraft during a pass. These templates can be configured with data specific to a particular pass. Animated graphical displays illustrate the progress during the pass. The first GENIE application automates passes of the solar, anomalous and magnetospheric particle explorer (SAMPEX) spacecraft.

Hartley, Jonathan↗

Medical Image Compression Using a New Subband Coding Method

A recently introduced iterative complexity- and entropy-constrained subband quantization design algorithm is generalized and applied to medical image compression. In particular, the corresponding subband coder is used to encode Computed Tomography (CT) axial slice head images, where statistical dependencies between neighboring image subbands are exploited. Inter-slice conditioning is also employed for further improvements in compression performance. The subband coder features many advantages such as relatively low complexity and operation over a very wide range of bit rates. Experimental results demonstrate that the performance of the new subband coder is relatively good, both objectively and subjectively.

Kossentini, Faouzi↗

Developing Tools and Techniques to Increase Communication Effectiveness

The Public Affairs Office (PAO) of the Johnson Space Center (JSC) is responsible for communicating current JSC Space Program activities as well as goals and objectives to the American Public. As part of the 1996 Strategic Communications Plan, a review of PAO' s current communication procedures was conducted. The 1996 Summer Faculty Fellow performed research activities to support this effort by reviewing current research concerning NASA/JSC's customers' perceptions and interests, developing communications tools which enable PAO to more effectively inform JSC customers about the Space Program, and proposing a process for developing and using consistent messages throughout PAO. Note that this research does not attempt to change or influence customer perceptions or interests but, instead, incorporates current customer interests into PAO's communication process.

Hayes, Linda A.↗

From Top to Bottom - the Multiwavelength Campaign of V824 Ara (HD 155555)

A great deal of progress has been made in recent years in decomposing the 2-D structure in the atmospheres of late-type stars. Doppler images of many photospheres single stars, T Tauri stars, Algols, RS CV(sub n) binaries to name a few - are regularly published (Strassmeier 1996; Richards and Albright 1996; Rice and Strassmeier 1996; Kuerster et al. 1994). Ultraviolet spectral images of chromospheres appear in the literature (e.g., Walter et al. 1987; Neff et al. 1989) but are less common owing to the difficult nature of obtaining complete phase coverage. Zeeman doppler images of magnetic fields are now feasible (e.g., Donati et al. 1992). Performing Doppler imaging of the same targets over many seasons has also been accomplished (e.g, Vogt et al. 1997). Even when a true image reconstruction is not possible due to poor spectral resolution, we can still infer a great deal about spatial structure if enough phases are observed. However, it is increasingly apparent that to make sense of recent results, many different spectral features spanning a range of formation temperature and density must be observed simultaneously for a coherent picture to emerge. Here we report on one such campaign. In 1996, we observed the southern hemisphere RS CV(sub n) binary V824 Ara (P=1(sup d).68, G5IV+K0V-IV-IV) over one complete stellar rotation with the Hubble Space Telescope and EUVE. In conjunction, radio and optical photometry and spectroscopy were obtained from the ground. Unique to this campaign is the complete phase coverage of a number of activity proxy indicators that cover source temperatures ranging from the photosphere to the corona.

Dempsey, Robert↗

Compact drilling and sample system

The Compact Drilling and Sample System (CDSS) was developed to drill into terrestrial, cometary, and asteroid material in a cryogenic, vacuum environment in order to acquire subsurface samples. Although drills were used by the Apollo astronauts some 20 years ago, this drill is a fraction of the mass and power and operates completely autonomously, able to drill, acquire, transport, dock, and release sample containers in science instruments. The CDSS has incorporated into its control system the ability to gather science data about the material being drilled by measuring drilling rate per force applied and torque. This drill will be able to optimize rotation and thrust in order to achieve the highest drilling rate possible in any given sample. The drill can be commanded to drill at a specified force, so that force imparted on the rover or lander is limited. This paper will discuss the cryo dc brush motors, carbide gears, cryogenic lubrication, quick-release interchangeable sampling drill bits, percussion drilling and the control system developed to achieve autonomous, cryogenic, vacuum, lightweight drilling.

Gillis-Smith, Greg R.↗