Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computational Icing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1954

Impingement of Water Droplets on an Ellipsoid with Fineness Ration 10 in Axisymmetric Flow

The presence of radomes and instruments that are sensitive to water films or ice formations in the nose section of all-weather aircraft and missiles necessitates a knowledge of the droplet impingement characteristics of bodies of revolution. Because it is possible to approximate many of these bodies with an ellipsoid of revolution, droplet trajectories about an ellipsoid of revolution with a fineness ratio of 10 were computed for incompressible axisymmetric air flow. From the computed droplet trajectories, the following impingement characteristics of the ellipsoid surface were obtained and are presented in terms of dimensionless parameters: (1) total rate of water impingement, (2) extent of droplet impingement zone, and (3) local rate of water impingement. These impingement characteristics are compared briefly with those previously reported for an ellipsoid of revolution with a fineness ratio of 5.

METEOROLOGY↗
NASA NTRS1986

Theoretical analysis of the electrical aspects of the basic electro-impulse problem in aircraft de-icing applications

A summary of modeling the electrical system aspects of a coil and metal target configuration resembling a practical electro-impulse deicing (EIDI) installation, and a simple circuit for providing energy to the coil, was presented. The model was developed in sufficient theoretical detail to allow the generation of computer algorithms for the current in the coil, the magnetic induction on both surfaces of the target, the force between the coil and target, and the impulse delivered to the target. These algorithms were applied to a specific prototype EIDI test system for which the current, magnetic fields near the target surfaces, and impulse were previously measured.

Henderson, R. A.↗
DOE OSTI2025

Non-intrusive reduced-order modeling for dynamical systems with spatially localized features

This work presents a non-intrusive reduced-order modeling framework for dynamical systems with spatially localized features characterized by slow singular value decay. The proposed approach builds upon two existing methodologies for reduced and full-order non-intrusive modeling, namely Operator Inference (OpInf) and sparse Full-Order Model (sFOM) inference. We decompose the domain into two complementary subdomains that exhibit fast and slow singular value decay. The dynamics of the subdomain exhibiting slow singular value decay are learned with sFOM while the dynamics with intrinsically low dimensionality on the complementary subdomain are learned with OpInf. The resulting, coupled OpInf-sFOM formulation leverages the computational efficiency of OpInf and the high resolution of sFOM, and thus enables fast non-intrusive predictions for conditions beyond those sampled in the training data set. A novel regularization technique with a closed-form solution based on the Gershgorin disk theorem is introduced to promote stable sFOM and OpInf models. We also provide a data-driven indicator for subdomain selection and ensure solution smoothness over the interface via a post-processing interpolation step. We evaluate the efficiency of the approach in terms of offline and online speedup through a quantitative, parametric computational cost analysis. We demonstrate the coupled OpInf-sFOM formulation for two test cases: a one-dimensional Burgers’ model for which accurate predictions beyond the span of the training snapshots are presented, and a two-dimensional parametric model for the Pine Island Glacier ice thickness dynamics, for which the OpInf-sFOM model achieves an average prediction error on the order of 1% with an online speedup factor of approximately 8$\times$ compared to the numerical simulation.

42 ENGINEERING↗
NASA NTRS1972

Neutral hydrogen in cometary comas.

The strong L alpha radiation observed recently in comets Tago-Sato-Kosaka and Bennett can be explained in terms of the resonant scattering of solar L alpha radiation on neutral hydrogen formed by the photodissociation of H2O which is vaporized from a nucleus having an ice core. A complete hydrodynamic description of an atmosphere composed of H2O and its daughter products OH, H and O coupled through frictional interaction as well as production and loss processes is given. Numerical results are computed in a typical case, and it is found that a temperature of about 3000 K for the cometary atmosphere provides the best fit with observation.

Mendis, D. A.↗
NASA NTRS1977

Photon scattering cross sections of H2 and He measured with synchrotron radiation

Total (elastic + inelastic) differential photon scattering cross sections have been measured for H2 gas and He, using an X-ray beam. Absolute measured cross sections agree with theory within the probable errors. Relative cross sections (normalized to theory at large S) agree to better than one percent with theoretical values calculated from wave functions that include the effect of electron-electron Coulomb correlation, but the data deviate significantly from theoretical independent-particle (e.g., Hartree-Fock) results. The ratios of measured absolute He cross sections to those of H2, at any given S, also agree to better than one percent with theoretical He-to-H2 cross-section ratios computed from correlated wave functions. It appears that photon scattering constitutes a very promising tool for probing electron correlation in light atoms and molecules.

Ice, G. E.↗
NASA NTRS1987

Lake Bonneville - Constraints on lithospheric thickness and upper mantle viscosity from isostatic warping of Bonneville, Provo, and Gilbert stage shorelines

Data collected from three deformed shorelines of Lake Bonneville (the Bonneville, Provo, and Gilbert shorelines) are used to constrain the effective elastic lithospheric thickness to 23 + or - 2 km, the mantle viscosity to (1.2 + or - 0.2) x 10 to the 20th Pa sec, and the depth to a significant viscosity increase to no less than 300 km. A modification of the earth model of Nakiboglu and Lambeck (1982, 1983) is used for the calculations, and the water load is computed at each time step from a digital terrain model and a specified lake elevation. Differences noted between the observed and computed shoreline elevations indicate a regional tilt down to the NE of about 6 x 10 to the -5th, which is suggested to be due to collapse of the peripheral bulge formed by the Laurentide ice sheet.

Bills, Bruce G.↗
NASA NTRS1995

Backscatter model for the unusual radar properties of the Greenland Ice Sheet

A number of planetary objects exhibit large radar reflectivity and polarization ratios, and more recently, a similar behavior has been observed over a vast portion of the Earth's surface: the percolation facies of the Greenland Ice Sheet. Surface-based ranging radar data and snow stratigraphy studies demonstrated that the radar properties of that portion of Greenland are caused by enhanced scattering from massive, large, solid-ice bodies buried in the top few meters of the dry, cold, clean snowy surface of the ice sheet and created by seasonal melting and refreezing events. Here, we model the icy inclusions as randomly oriented, discrete, noninteracting, dielectric cylinders embedded in a transparent snow medium. An exact analytical solution is used to compute the scattered field from the cylinders. Using this model, we correctly predict the polarimetric radar observations gathered by an airborne imaging system at three wavelengths (5.6, 24, and 68 cm), between 19 deg and 65 deg incidence angle. The diameter and number density of the cylinders that are inferred from the radar data using the model are consistent with in situ observations of the icy inclusions. The large radar reflectivity and polarization ratios are interpreted as arising internal reflections of the radar signals in the icy inclusions that first-order external reflection models fail to predict. The results compare favorably with predictions from the coherent backscatter or weak localization theory and may provide a complementary framework for interpreting exotic radar echoes from other planetary objects.

Rignot, Eric↗
NASA NTRS2000

Energetic Ion Interactions with the Galilean Satellites

The principal research tasks of this investigation are: (1) specification of the energetic (keV to MeV) ion environments upstream of the four Galilean satellites and (2) data analysis and numerical modeling of observed ion interactions with the satellites. Differential flux spectra are being compiled for the most abundant ions (protons, oxygen, and sulfur) from measurements at 20 keV to 100 MeV total energy by the Energetic Particle Detector (EPD) experiment and at higher ion energies by the Heavy Ion Counter (HIC) experiment. Runge-Kutta and other numerical techniques are used to propagate test particles sampled from the measured upstream spectra to the satellite surface or spacecraft through the local magnetic and corotational electric field environment of each satellite. Modeling of spatial variations in directional flux anisotropies measured during each close flyby provides limits on atomic charge states for heavy (O, S) magnetospheric ions and on internal or induced magnetic fields of the satellites. Validation of models for magnetic and electric field configurations then allows computation of rates for ion implantation, sputtering, and energy deposition into the satellite surfaces for further modeling of observable chemical changes induced by irradiation. Our ongoing work on production of oxidants and other secondary species by ice irradiation on Europa's surface has significant applications, already acknowledged in current literature, to astrobiological evolution. Finally, the work will improve understanding of energetic ion sources and sinks at the satellite orbits for improved modeling of magnetospheric transport processes. The scope of the research effort mainly includes data from the primary Galileo mission (1995-1997) but may also include some later data where directly relevant (e.g., comparison of J0 and I27 data for Io) to the primary mission objectives. Funding for this contract also includes partial support for our related education and public outreach activity, 'Interaction of Magnetospheric Particles Applied to Classroom Teaching (IMPACT).'

Cooper, John F.↗
NASA NTRS1995

Modeling the Gas Flux From a Jupiter-Class Comet Nucleus

Sublimation and gas flux of volatile ices from porous bodies in the Solar System are important, observable phenomena. Surface erosion and dust build-up on a comet nucleus and coma formation are processes attributable to the flux of sublimating gases. Our computer simulations focus on the gas flux from volatile, icy components in the surface layer of a porous, Jupiter-class comet in order to investigate the relationship of the observed relative molecular abundances in the coma with those in then nucleus. We compare results from one-dimensional and two-dimensional models.

Jupiter Comet↗
NASA NTRS2009

Filtering Water by Use of Ultrasonically Vibrated Nanotubes

Devices that could be characterized as acoustically driven molecular sieves have been proposed for filtering water to remove all biological contaminants and all molecules larger than water molecules. Originally intended for purifying wastewater for reuse aboard spacecraft, these devices could also be attractive for use on Earth in numerous settings in which there are requirements to obtain potable, medical-grade, or otherwise pure water from contaminated water supplies. These devices could also serve as efficient means of removing some or all water from chemical products . for example, they might be useful as adjuncts or substitutes for stills in the removal of water from alcohols and alcoholic beverages. These devices may be constructed using various materials, such as ceramics, metallics, or polymers, depending on end-use requirements. A representative device of this type (see figure) would include a polymeric disk, about 1 mm in diameter and between 1 and 40 microns thick, within which would be embedded single-wall carbon nanotubes aligned along the thickness axis. The polymeric disk would be part of a unitary polymeric ring assembly. An acoustic transducer in the form of a piezoelectric-film-and-electrode subassembly - typically 9 microns thick and made of poly(vinylidene fluoride) coated with copper 150 nm thick -. would be affixed to the outside of the outer polymeric ring by means of an electrically nonconductive epoxy. The nanotubes would be chosen to have diameters between about 8 and about 13.5 A because water molecules could fit into the nanotubes, but larger molecules could not. Water to be purified would be placed in contact with one face (typically, the upper face) of the filter disk. The surface tension of water is low enough that water molecules should enter and travel along the nanotubes, and computational simulations of molecular dynamics and experimental measurements have shown that the water molecules inside the nanotubes in this size range can be expected to become aligned into helical columns that exhibit properties of both hexagonal ice crystals and liquid water

Gavalas, Lillian Susan↗
DOE OSTI2024

Enhancing the Functionality of a Hollow Scaffold Solid State Bioreactor via Computer Aided Design Optimization

The concern over greenhouse gases, methane (CH 4 ) and carbon dioxide (CO 2 ), is increasing rapidly. There have been strides to find solutions to this global issue but there is not a clear path to a successful end goal. The concentration of CH 4 and CO 2 in the atmosphere has increased significantly over the last 60 years, methane is a great source of concern due to its ability to trap a high amount of heat in the atmosphere. These greenhouse gases contribute to global warming which has caused changes in the environment, including the melting of ice caps, and altered weather patterns. Solutions for these pressing challenges have led to different avenues of methane mitigation one of which is the development of solid-state bioreactors. These reactors harness the power of biological species that have evolved to use methane as an energy source. The development and optimization of Hollow Scaffold Solid State Bioreactors (HS-SSBR) has become readily available due to the advancements in additive manufacturing technology and accessibility of computer aided design (CAD) software. With laboratory scale experiments, time and effort are of great importance. Enhancing the design of the HS-SSBR to create a more user-friendly interface, but also increase the functionality of the reactor. The reactor's design improvements focus on better dispersion of methane and circulation of media.

36 MATERIALS SCIENCE↗
NASA NTRS2011

Vertical Distribution of Aersols and Water Vapor Using CRISM Limb Observations

Near-infrared spectra taken in a limb-viewing geometry by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on-board the Mars Reconnaissance Orbiter (MRO) provide a useful tool for probing atmospheric structure. Specifically, the observed radiance as a function of wavelength and height above the limb allows the vertical distribution of both dust and ice aerosols to be retrieved. These data serve as an important supplement to the aerosol profiling provided by the MRO/MCS instrument allowing independent validation and giving additional information on particle physical and scattering properties through multi-wavelength studies. A total of at least ten CRISM limb observations have been taken so far covering a full Martian year. Each set of limb observations nominally contains about four dozen scans across the limb giving pole-to-pole coverage for two orbits at roughly 100 and 290 W longitude over the Tharsis and Syrtis/Hellas regions, respectively. At each longitude, limb scans are spaced roughly 10 degrees apart in latitude, with a vertical spatial resolution on the limb of roughly 800 m. Radiative transfer modeling is used to model the observations. We compute synthetic CRISM limb spectra using a discrete-ordinates radiative transfer code that accounts for multiple scattering from aerosols and accounts for spherical geometry of the limb observations by integrating the source functions along curved paths in that coordinate system. Retrieved are 14-point vertical profiles for dust and water ice aerosols with resolution of 0.4 scale heights between one and six scale heights above the surface. After the aerosol retrieval is completed, the abundances of C02 (or surface pressure) and H20 gas are retrieved by matching the depth of absorption bands at 2000 nm for carbon dioxide and at 2600 run for water vapor. In addition to the column abundance of water vapor, limited information on its vertical structure can also be retrieved depending on the signal available from aerosol scattering.

Smith, Michael D.↗
NASA NTRS1983

Archival of aircraft scatterometer data from AAFE RADSCAT missions

Aircraft scatterometer data obtained over the ocean with the Radiometer-Scatterometer (RADSCAT) instrument is documented. The normalized radar cross section data was obtained at 13.9 GHz for a variety of ocean surface wind conditions, which are also presented. All such valid RADSCAT ocean scatterometer data for which surface truth was obtained are included, except for ice research missions during the last year of RADSCAT's lifetime. Aircraft scatterometer data obtained for the SEASAT underflights were with a second instrument, the Airborne Microwave Scatterometer (AMSCAT). The RADSCAT data are archived on card image computer tapes and on microfiche.

Schroeder, L. C.↗
NASA NTRS1999

Modeling Studies of the Effects of Winds and Heat Flux on the Tropical Oceans

Over a decade ago, funding from this NASA grant supported the development of the Cane-Zebiak ENSO prediction model which remains in use to this day. It also supported our work developing schemes for modeling the air-sea heat flux in ocean models used for studying climate variability. We introduced a succession of simple boundary layer models that allow the fluxes to be computed internally in the model and avoid the need to specify the atmospheric thermodynamic state. These models have now reached a level of generality that allows modeling of the global, rather than just tropical, ocean, including sea ice cover. The most recent versions of these boundary layer models have been widely distributed around the world and are in use by many ocean modeling groups.

Seager, R.↗
NASA NTRS2002

Visions of our Planet's Atmosphere, Land and Oceans: NASA/NOAA Electronic-Theater 2002. Spectacular Visualizations of our Blue Marble

Spectacular Visualizations of our Blue Marble The NASA/NOAA Electronic Theater presents Earth science observations and visualizations in a historical perspective. Fly in from outer space to the 2002 Winter Olympic Stadium Site of the Olympic Opening and Closing Ceremonies in Salt Lake City. Fly in and through Olympic Alpine Venues using 1 m IKONOS "Spy Satellite" data. Go back to the early weather satellite images from the 1960s and see them contrasted with the latest US and international global satellite weather movies including hurricanes & "tornadoes". See the latest visualizations of spectacular images from NASA/NOAA remote sensing missions like Terra, GOES, TRMM, SeaWiFS, Landsat 7 including new 1 - min GOES rapid scan image sequences of Nov 9th 2001 Midwest tornadic thunderstorms and have them explained. See how High-Definition Television (HDTV) is revolutionizing the way we communicate science. (In cooperation with the American Museum of Natural History in NYC). See dust storms in Africa and smoke plumes from fires in Mexico. See visualizations featured on the covers of Newsweek, TIME, National Geographic, Popular Science & on National & International Network TV. New computer software tools allow us to roam & zoom through massive global images e.g. Landsat tours of the US, and Africa, showing desert and mountain geology as well as seasonal changes in vegetation. See animations of the polar ice packs and the motion of gigantic Antarctic Icebergs from SeaWinds data. Spectacular new visualizations of the global atmosphere & oceans are shown. See vertexes and currents in the global oceans that bring up the nutrients to feed tiny algae and draw the fish, whales and fisherman. See the how the ocean blooms in response to these currents and El Nicola Nina climate changes. See the city lights, fishing fleets, gas flares and biomass burning of the Earth at night observed by the "night-vision" DMSP military satellite.

Hasler, A. F.↗
NASA NTRS1980

The development of a stepped frequency microwave radiometer and its application to remote sensing of the Earth

The design, development, application, and capabilities of a variable frequency microwave radiometer are described. This radiometer demonstrated the versatility, accuracy, and stability required to provide contributions to the geophysical understanding of ocean and ice processes. A closed-loop feedback method was used, whereby noise pulses were added to the received electromagnetic radiation to achieve a null balance in a Dicke switched radiometer. Stability was achieved through the use of a constant temperature enclosure around the low loss microwave front end. The Dicke reference temperature was maintained to an absolute accuracy of 0.1 K using a closed-loop proportional temperature controller. A microprocessor based digital controller operates the radiometer and records the data on computer compatible tapes. This radiometer exhibits an absolute accuracy of better than 0.5 K when the sensitivity is 0.1 K. The sensitivity varies between 0.0125 K and 1.25 K depending upon the bandwidth and integration time selected by the digital controller. Remote sensing experiments were conducted from an aircraft platform and the first radiometeric mapping of an ocean polar front; exploratory experiments to measure the thickness of lake ice; first discrimination between first year and multiyear ice below 10 GHz; and the first known measurements of frequency sensitive characteristics of sea ice.

Harrington, R. F.↗
DOE OSTI2020

Particle Track Classification Using Quantum Associative Memory (Final Technical Report)

This project explored the use of quantum-assisted algorithms for pattern matching in sub-atomic physics experiments. Pattern matching algorithms are commonly employed to prune data of random noise and to help discriminate between signals generated by particle tracks of interest and signals generated by background events. The quantum-assisted algorithms explored in this project were based on an Ising formulation of quantum associative model (QAMM) recall and quantum content-addressable memory (QCAM) recall. The recall is performed by comparing a probe pattern with those stored in a library of patterns encoded in the QAMM/QCAM model. The classification accuracy of QAMM and QCAM recall was determined as a function of detector resolution, noise, and efficiency and pattern density, where pattern density is defined as the ratio of the number of reference signal patterns encoded in the library to each pattern’s length. We found that QAMM achieved high classification accuracy when applied to datasets with low pattern density. QCAM achieved high classification accuracy for datasets with high pattern density and was found to be more robust to detector noise. The project methodology and results are described in detail in our arXiv preprint (arXiv:2011.11848) . This project was conducted by scientists at the Johns Hopkins University Applied Physics Laboratory and Oak Ridge National Laboratory from August 2018 to August 2020 and was supported by DOE grant DE-SC0019497.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1951

An Empirical Method Permitting Rapid Determination of the Area, Rate and Distribution of Water-Drop Impingement on an Airfoil of Arbitrary Section at Subsonic Speeds

An empirical method for the determination of the area, rate, and distribution of water-drop impingement on airfoils of arbitrary section is presented. The procedure represents an initial step toward the development of a method which is generally applicable in the design of thermal ice-prevention equipment for airplane wing and tail surfaces. Results given by the proposed empirical method are expected to be sufficiently accurate for the purpose of heated-wing design, and can be obtained from a few numerical computations once the velocity distribution over the airfoil has been determined. The empirical method presented for incompressible flow is based on results of extensive water-drop. trajectory computations for five airfoil cases which consisted of 15-percent-thick airfoils encompassing a moderate lift-coefficient range. The differential equations pertaining to the paths of the drops were solved by a differential analyzer. The method developed for incompressible flow is extended to the calculation of area and rate of impingement on straight wings in subsonic compressible flow to indicate the probable effects of compressibility for airfoils at low subsonic Mach numbers.

Bergrun, N. R.↗