Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cleaned”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Codes and Ordinances for Clean Energy: Highland Park Pathways to Power [Slides]

Through the Communities LEAP (Local Energy Action Program) Pilot, the National Renewable Energy Laboratory (NREL) engaged the Highland Park Stakeholder Coalition to scope four technical assistance work areas to address their energy needs and goals. This slide deck addresses the highlighted tasks under work area "A" related to policy analysis, due diligence, and case studies for removing barriers and providing best practices for local clean energy development.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Hydrogen Storage for Load-Following and Clean Power: Duct-firing of Hydrogen to Improve the Capacity Factor of NGCC Plants (Final Report, Phase II Pre-Front End Engineering Design Study)

GTI Energy (GTI) and team members Southern Company Services (SCS), Pacific Gas & Electric (PG&E) and the Electric Power Research Institute (EPRI) performed a Phase II Pre-Feed Study under contract DE-FE0032008 for Hydrogen Storage for Load-Following and Clean Power. The configuration of the proposed system consists of subsystems for on-site H 2 production, on-site H 2 storage (up to 54 MWth in commercial vessels) and H 2 combustion in a duct burner in a Heat Recovery Steam Generator (HRSG) integrated with an existing fossil asset. Here, the firing rate of the duct burner is varied to let the plant respond to fluctuations of electrical load and H 2 production is relatively constant by storing H 2 . The proposed system is an improvement over alternate low carbon dispatchable power options. Technoeconomic analyses show H 2 produced with GTI’s patented Compact Hydrogen Generator (CHG) with inherent carbon capture will be lower cost (Levelized Cost of Hydrogen, LCOH) relative to hydrogen produced with a Steam Methane Reformer (SMR) with an amine system for carbon capture. This lower cost hydrogen enables our integrated system to deliver electricity (Levelized Cost of Electricity, LCOE) at 17.4% lower cost relative to a SMR sourced H 2 -fired HRSG (with an amine system for carbon capture) – Steam Turbine Generator (STG). Our analysis using EPRI’s US REGEN macroeconomic model shows our system will have significant demand in the power market and therefore require significant capacity expansion (CHG plants built to deliver hydrogen) to deliver low cost, low carbon power. In Phase II, our Team has completed a detailed system definition including the development of process models, definition of battery limits, Process Flow Diagrams (PFDs), Piping and Instrumentation Drawings (P&IDs), and a plant layout. A preliminary design for the key components of the CHG was developed including component lists & specifications. An evaluation of environmental and permitting considerations was completed and included the development of an Environmental Information Volume (EIV). The duct burners, which are flexible and can burn hydrogen and/or natural gas, were defined and initial CFD analyses were completed.

03 NATURAL GAS↗
DOE OSTI2024

A Fair and Equitable Clean Energy Transition in Alachua County: Project EMPOWER Final Report

This report provides an overview of the collaboration between the U.S. Department of Energy's Communities LEAP Pilot and the community-led Project EMPOWER (Energy Modernization for People, Opportunity, Work, Equity, and Renewables) in Alachua County, FL. Through Communities LEAP, the National Renewable Energy Laboratory and others provided technical assistance to Project EMPOWER in the areas of community engagement, solar power, weatherization and energy efficiency, green jobs, and fund development. This final report summarizes work accomplished during the engagement and provides potential next steps for the EMPOWER team to consider as it continues pursuing its goal of a fair and equitable clean energy transition for Alachua County.

14 SOLAR ENERGY↗
DOE OSTI2023

The battle of clean and dirty qubits in the era of partial error correction

When error correction becomes possible it will be necessary to dedicate a large number of physical qubits to each logical qubit. Error correction allows for deeper circuits to be run, but each additional physical qubit can potentially contribute an exponential increase in computational space, so there is a trade-off between using qubits for error correction or using them as noisy qubits. In this work, we look at the effects of using noisy qubits in conjunction with noiseless qubits (an idealized model for error-corrected qubits), which we call the “clean and dirty” setup. We employ analytical models and numerical simulations to characterize this setup. Numerically we show the appearance of Noise-Induced Barren Plateaus (NIBPs), i.e., an exponential concentration of observables caused by noise, in an Ising model Hamiltonian variational ansatz circuit. We observe this even if only a single qubit is noisy and given a deep enough circuit, suggesting that NIBPs cannot be fully overcome simply by error-correcting a subset of the qubits. On the positive side, we find that for every noiseless qubit in the circuit, there is an exponential suppression in the concentration of gradient observables, showing the benefit of partial error correction. Finally, our analytical models corroborate these findings by showing that observables concentrate with a scaling in the exponent related to the ratio of dirty-to-total qubits.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

FESAC Decadal Study: Clean, multi-purpose fusion power from small field-reversed configuration (FRC) reactors

This paper urges greatly expanded research into scientific and technical areas of aneutronic field-reversed-configuration devices (FRCs), specifically relatively small FRCs whose fusion power is below 50 MW and above 0.5 MW. These properties greatly increase safety, allow rapid exploration of incremental improvements, enable implementation of improved technologies, ameliorate materials issues, reduce financial risk, ease siting and maintenance requirements, simplify incorporation into the electrical grid, reduce need for long-distance transmission lines, expand the potential markets for these reactors, and provide the US and US industry with leadership positions in clean energy. This route to fusion power, first into niche markets not accessible to the mainline (D-T tokamak) approach to fusion, would demonstrate the reliability and safety of fusion and its competitive advantages against established technologies in the electricity-generation market.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Business Opportunities in Clean Energy Supply Chains: Guidebook for Small and Medium-Sized Automotive Suppliers

This is the final report for the referenced TCF award which ran from Oct. 2019 through Jan. 2024 in conjunction with the industry partner Swift Solar. The long duration of the program was due to several factors including the pandemic and a technical work stoppage due to changes in the scope. Additionally, Swift’s business focus shifted during the course of the program. As a result of these factors, this program underwent two distinct modifications that dramatically changed the work scope. The following report is organized into three separate sections, each of which addresses a distinct work scope. Those scope changes, what necessitated them, and any new tasks/milestones are given, briefly, at the top of each section. The work performed was research on the hybrid halide perovskites (HHP), both the absorber material itself as well as other material layers that are required in a full device stack. At the start of the period of performance, there were two distinct challenges that we sought to address: (1) a wide band gap absorber (>1.6 eV), and (2) a recombination layer for tandem devices that provided good sequestration of the individual cell absorber materials in their respective device layers. NREL had previously published, and patented, advancements in both of these areas and they were the focus of much of the work throughout the program. The auto manufacturing space is evolving quickly. Sales of various electrified vehicles (xEVs) continue to grow steadily, which has medium to long-term ramifications for the thousands of U.S. manufacturers and hundreds of thousands of workers that contribute to the domestic automotive supply chain. In tandem with this growth in xEV sales, domestic clean energy manufacturing is surging (both for the xEV supply chain and other technologies), with public incentives spurring billions in private sector investment. Moreover, the next 2–3 years will see new and expanded industrial facilities come online to make products like hydrogen electrolyzers, solar panels, batteries, advanced electronics—and will create new supply chain needs and business opportunities as they do. DOE’s Office of Manufacturing and Energy Supply Chains (MESC) and Argonne National Laboratory developed this report to help automotive manufacturers—alongside various business support partners— understand these trends and their response options, and to make the most of current federal assistance programs for manufacturers. These market changes may create opportunities for small- and medium-sized manufacturers (SMMs) to expand production, grow profit margins, and diversify their businesses. For instance, SMMs could take advantage of engineering and process design similarities with new end-use industries that might enable greater business growth and stability as markets continue to change.

14 SOLAR ENERGY↗
DOE OSTI2025

Clean Air as a Bonus for Achieving Energy-Related State Goals: A Review of Policies and Programs in 15 States

This report explores connections between six common areas for state action on energy-related issues — resilience, economic development, energy affordability, electrifying transportation, grid modernization, and using local resources — and reducing air emissions. Although clean air often is not a driver for such state actions, they nonetheless reduce a variety of emissions, including particulates, nitrogen oxides, sulfur dioxide, and greenhouse gases like carbon dioxide. The study spans 15 geographically diverse states: Arizona, Delaware, Florida, Georgia, Indiana, Iowa, Kentucky, Louisiana, Missouri, Ohio, Pennsylvania, South Carolina, Tennessee, Texas and Utah. While these states have not adopted mandatory climate goals, they conduct a wide range of energy-related activities that reduce greenhouse gas emissions and other air pollutants as a side benefit.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Clean Energy Revolving Loan Funds: International Experience [Slides]

Tunisia’s Energy Transition Fund (FTE), created in 2013, was established to promote energy efficiency and renewable energy projects in the public and private sectors. To overcome financing challenges related to the energy transition, Tunisia’s National Agency for Energy Conservation (ANME) seeks both to strengthen available financial resources and to develop innovative financing structures. Revolving Loan Funds (RLFs) are one such innovative financing structure, used by countries around the world to foster the development of distributed clean energy projects. This report aims to inform policy makers and various stakeholders on the opportunity to design an RLF by drawing on successful experiences from other countries. Specifically, this report provides analytical support for discussions with ANME and its partners to develop an RLF in the context of Tunisia. It outlines the 12 essential steps for establishing a RLF and includes detailed case studies demonstrating successful RLF implementation across various contexts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Technical Track on Biomass Carbon Removal and Storage (BiCRS): Mapping bioresources, phase 1 - Consistency check comparing Mission Innovation’s Data Visualization Tool for Bioresources and the Clean Energy Ministerial Biofuture Initiative Global Biomass data accessible via the US Department of Energy’s Bioenergy Knowledge Discovery Framework (KDF)

The Mission Innovation (MI) Carbon Dioxide Removal (CDR) Mission, Technical Track on Biomass Carbon Dioxide Removal and Storage (BiCRS), has produced a biomass resource database for its members. In parallel, Oak Ridge National Laboratory (ORNL) developed the International Feedstock Reporting data portal—herein referred to as the CEM Biofuture-KDF data—on behalf of the Clean Energy Ministerial Biofuture Initiative (CEM Biofuture), as a specific task under Biofuture’s 2024–25 Action Plan. This work was conducted at the request of CEM Biofuture and funded by the U.S. Department of Energy in support of that initiative, and it is hosted within DOE’s Knowledge Discovery Framework (KDF).

09 BIOMASS FUELS↗
DOE OSTI2024

Distributed Sensors for Waste Plastics Gasification and Clean Hydrogen Productions

This project developed distributed fiber sensors for plastics gasification reactor for clean hydrogen production. These sensors can be directly inserted into gasification reactors to perform real-time, in-situ hydrogen and temperature profile measurements with 5-cm spatial resolution across the entire reactor chamber. Our research team will use this new sensor capability to study how feedstock mixtures, feedstock preparations, and air/steam flows impact feedstock consumption, hydrogen production, and harmful chemical production emissions.

08 HYDROGEN↗
DOE OSTI2024

Regulators’ Financial Toolbox: Keeping Track of Clean Energy Summary

On February 26, 2024, NARUC’s Committee on Energy Resources and the Environment hosted a panel discussion titled “Keeping Track of Clean Energy Part III: Economy Wide Consistency” at the 2024 NARUC Winter Policy Summit. The panel was moderated by Hon. Abigail Anthony, Rhode Island Public Utilities Commission, and featured remarks by Wenbo Shi, PhD-Founder/CEO, Singularity Energy; Todd Jones, Principal, US Markets, Center for Resource Solutions (CRS); and Tory Clark, Partner, Energy + Environmental Economics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

The battle of clean and dirty qubits in the era of partial error correction

When error correction becomes possible it will be necessary to dedicate a large number of physical qubits to each logical qubit. Error correction allows for deeper circuits to be run, but each additional physical qubit can potentially contribute an exponential increase in computational space, so there is a trade-off between using qubits for error correction or using them as noisy qubits. In this work we look at the effects of using noisy qubits in conjunction with noiseless qubits (an idealized model for error-corrected qubits), which we call the "clean and dirty" setup. We employ analytical models and numerical simulations to characterize this setup. Numerically we show the appearance of Noise-Induced Barren Plateaus (NIBPs), i.e., an exponential concentration of observables caused by noise, in an Ising model Hamiltonian variational ansatz circuit. We observe this even if only a single qubit is noisy and given a deep enough circuit, suggesting that NIBPs cannot be fully overcome simply by error-correcting a subset of the qubits. On the positive side, we find that for every noiseless qubit in the circuit, there is an exponential suppression in concentration of gradient observables, showing the benefit of partial error correction. Finally, our analytical models corroborate these findings by showing that observables concentrate with a scaling in the exponent related to the ratio of dirty-to-total qubits.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Empirical Estimation of the Energy Impacts of Projects Installed through Residential Property Assessed Clean Energy Financing Programs in California

We examine the energy use impacts of energy efficiency and solar PV projects financed by residential property assessed clean energy (R-PACE) programs in California. We leverage household-level interval meter data to apply normalized metered energy consumption (NMEC) methods at significant scale—more than 25,000 electric meters and more than 15,000 gas meters. We develop a comparison group to account for non-project-related changes in usage. The projects include homes that replaced existing HVAC equipment with higher-efficiency units and homes that installed central heating or air conditioning equipment for the first time. We have limited information on pre-project household equipment stock so we develop a method to infer new installations. We find that projects that installed energy efficiency technologies reduce electricity consumption by approximately 3% and gas consumption by approximately 3.5% on average. When we remove homes that installed new cooling and heating equipment for the first time, savings rise to approximately 5% for electricity and approximately 6% for gas. Given the California climate and the results of an existing study of similar California projects, these results are in line with expectations. Solar PV projects produce electricity that offsets approximately 69% of household electricity consumption on average. We estimate that California R-PACE projects installed through the end of 2019 produce annual reductions in grid-tied electricity consumption of 506 GWh (equivalent to the electricity consumption of approximately 74,000 California households) and gas consumption reductions of 2 million therms (equivalent to the gas consumption of approximately 4700 California households) in a typical weather year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

A Model-Based Systems Engineering Approach for Effective Decision Support of Modern Energy Systems Depicted with Clean Hydrogen Production

A holistic approach to decision-making in modern energy systems is vital due to their increase in complexity and interconnectedness. However, decision makers often rely on narrowly-focused strategies, such as economic assessments, for energy system strategy selection. The approach in this paper helps considers various factors such as economic viability, technological feasibility, environmental impact, and social acceptance. By integrating these diverse elements, decision makers can identify more economically feasible, sustainable, and resilient energy strategies. While existing focused approaches are valuable since they provide clear metrics of a potential solution (e.g., an economic measure of profitability), they do not offer the much needed system-as-a-whole understanding. This lack of understanding often leads to selecting suboptimal or unfeasible solutions, which is often discovered much later in the process when a change may not be possible. This paper presents a novel evaluation framework to support holistic decision-making in energy systems. The framework is based on a systems thinking approach, applied through systems engineering principles and model-based systems engineering tools, coupled with a multicriteria decision analysis approach. The systems engineering approach guides the development of feasible solutions for novel energy systems, and the multicriteria decision analysis is used for a systematic evaluation of available strategies and objective selection of the best solution. The proposed framework enables holistic, multidisciplinary, and objective evaluations of solutions and strategies for energy systems, clearly demonstrates the pros and cons of available options, and supports knowledge collection and retention to be used for a different scenario or context. The framework is demonstrated in case study evaluation solutions for a novel energy system of clean hydrogen generation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Q1549-C25: a clean source of Lyman-continuum emission at z = 3.15

We present observations of Q1549-C25, an ∼L{sup ∗} star-forming galaxy at z = 3.15 for which Lyman-continuum (LyC) radiation is significantly detected in deep Keck/LRIS spectroscopy. We find no evidence of contamination from a lower-redshift interloper close to the line of sight in the high signal-to-noise spectrum of Q1549-C25. Furthermore, the morphology of Q1549-C25 in V {sub 606}, J {sub 125}, and H {sub 160} Hubble Space Telescope (HST) imaging reveals that the object consists of a single, isolated component within 1″. In combination, these data indicate Q1549-C25 as a clean spectroscopic detection of LyC radiation, only the second such object discovered to date at z ∼ 3. We model the spectral energy distribution of Q1549-C25, finding evidence of negligible dust extinction, an age (assuming continuous star formation) of ∼1 Gyr, and a stellar mass of M{sub ∗}=7.9×10{sup 9} M{sub ⊙}. Although it is not possible to derive strong constraints on the absolute escape fraction of LyC emission, f {sub esc}(LyC), from a single object, we use simulations of intergalactic and circumgalactic absorption to infer f{sub esc}(LyC)⩾0.51 at 95% confidence. The combination of deep Keck/LRIS spectroscopy and Hubble Space Telescope imaging is required to assemble a larger sample of objects like Q1549-C25, and obtain robust constraints on the average f {sub esc}(LyC) at z ∼ 3 and beyond.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Repurposing Offshore Infrastructure for Clean Energy (ROICE) vs. Decommissioning – Commercial Considerations

Abstract The Repurposing Offshore Infrastructure for Clean Energy (ROICE) Program, a collaboration of the energy industry and University of Houston, proposes extending the life of up to 1,500 oil and gas platforms in the Outer Continental Shelf of the Gulf of Mexico, USA. Rather than decommissioning or converting them to underwater reefs at the end of their oil and gas production phase, the platforms could be transformed for 10–20+ years of renewable energy development, such as green hydrogen production or carbon dioxide injection and storage, resulting in significant economic, environmental, and social benefits. ROICE has already published papers on the technical and regulatory considerations for such repurposing projects. This paper focuses on the commercial considerations needed to ensure ROICE projects are economically viable and sustainable for all involved. There are potentially many entities that can come together to progress a repurposing project, including oil and gas asset owners, operators, investors, developers, contractors, manufacturers, and regulators. This paper looks at possible combinations of these entities in a ROICE project team and the various commercial agreements that will be needed to ensure a mutually successful outcome. The paper proposes adapting existing industry agreements and templates to suit, including asset transfer agreements (ATA), asset purchase agreements (APA) and joint purchasing agreements (JOA). An ATA or APA can be drafted to address the obligations and issues involved in the sale or transfer of an existing oil and gas facility to the developer, operator, non-operating interests, and financial investors in a ROICE project, while a JOA can be drafted to govern the rights, obligations, and financial requirements of the parties involved in the development and operation.

Legge, G. [Endeavor Management, USA]↗
DOE OSTI2025

Cleaned 5-Minute Resolution Air Quality and Meteorological Data from Nine TCEQ CAMS Sites in Houston, Texas (Nov 2021 – Oct 2022)

These data encompass 5-minute air monitoring and meteorological observations collected in the greater Houston, Texas metropolitan region, at nine (9) Continuous Ambient Monitoring Stations (CAMS) operated by the Texas Commission on Environmental Quality (TCEQ) between November 1, 2021 and October 31, 2022. The CAMS sites (CAMS 1, 8, 35, 45, 148, 403, 405, 410, and 1052) were chosen because their instrumentation includes measurements of PM2.5. These sites also provide continuous multi-parameter air-quality and meteorological measurements. Particulate matter (PM2.5, PM10) was sampled along with several trace gases, including ozone (O3), nitrogen oxides (NO, NO2, NOx), sulfur dioxide (SO2), and carbon monoxide (CO). The data set also contains standard surface meteorological parameters (temperature, humidity, pressure, wind speed, and wind direction). Several sites also include AutoGC-based measurements of volatile organic compounds (VOCs). Air monitoring instruments deployed at the selected sites comprise the following systems: BAM-1020 or TEOM (PM2.5), Thermo Scientific TEI 49i (O3), TEI 42i (NOx), and AutoGCs (VOCs). This data set is similar to the data included within the houairq5mX1.00 datastream, except for a few additional quality control steps. A systematic data cleaning and verification process was performed on the data set to ensure its quality and preparation for analysis. Removal of non-numeric status flags (e.g., [LIM], [QAS], [SPZ], [CAL], [PMA], [AQI], [SPN], [MAL]) was accomplished by employing rule-based string parsing to extract valid numerical values. Missing entries were set to -9999; however, invalid or anomalous values (e.g., 99999) were retained as originally reported by the TCEQ to preserve data provenance. The time sequence was verified for completeness, removal of duplicates, and uniformity at 5-minute intervals. Column labeling was standardized, and corresponding values were assessed for physical plausibility. All timestamps in the data set were reported in Coordinated Universal Time (UTC) as provided by the TCEQ. Further, the latitude and longitude coordinates were added for each CAMS site. A subset of the data (June 1–September 30, 2022) has been used in the following publication: Subba et al. 2025. “Implications of sea breeze circulations on boundary layer aerosols in the southern coastal Texas region.” EGUsphere 2025: 1–49, https://doi.org/10.5194/egusphere-2025-2659.

latitude↗