Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COUPLED MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Holograms for laser diode: Single mode optical fiber coupling

The low coupling efficiency of semiconductor laser emissions into a single mode optical fibers place a severe restriction on their use. Associated with these conventional optical coupling techniques are stringent alignment sensitivities. Using holographic elements, the coupling efficiency may be increased and the alignment sensitivity greatly reduced. Both conventional and computer methods used in the generation of the holographic couplers are described and diagrammed. The reconstruction geometries used are shown to be somewhat restrictive but substantially less rigid than their conventional optical counterparts. Single and double hologram techniques are examined concerning their respective ease of fabrication and relative merits.

Fuhr, P. L.↗

Low repetition rate and broad frequency tuning from a grating-coupled passively mode-locked quantum dot laser

Passively mode-locked quantum dot lasers with a grating-coupled external cavity arrangement are investigated. A broad repetition-rate tuning range of fundamental mode-locking from 2 GHz to a record-low frequency of 79.3 MHz is achieved with selecting the wavelength at 1.28 μm. A narrow RF linewidth of ∼25 Hz and an intrinsic linewidth as low as 0.15 Hz are also obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Ohmic-dominant heating mode of capacitively coupled plasma inverted by boundary electron emission

Electron emission from the boundary is ubiquitous in a capacitively coupled plasma (CCP) and precipitates nonnegligible influence on the discharge properties. Here, we present Particle-in-Cell/Monte Carlo Collision simulation of an Ohmic-dominant heating mode of the capacitively coupled plasma, where the stochastic heating vanishes and only Ohmic heating sustains the discharge due to sheath inversion by boundary electron emission. The inverted CCP features negative sheath potential without Bohm presheath, hence excluding plasma heating due to sheath edge oscillation. The particle and energy transport of the proposed heating mode is analyzed. The influence of boundary electron emission flux, source voltage, and neutral pressure on the transition between classic and Ohmic-dominant CCP heating modes is shown with designated simulation scans. Further, a modified inverse sheath–plasma coupling due to excessive ionization is discovered. In the end, key indicators of the proposed heating mode in plasma diagnostics are provided for future experimental verifications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence for Intersections of Coupled g-Mode Sets as a Source of High Frequency Oscillations in Sunspot Occurrence

We show that sunspots tend to appear at longitudes where coupled sets of g-mode oscillations are depositing the most energy. Since the g-mode sets rotate at predictable rates slower than the Sun, the same predictability should eventually apply to the location and strength of sunspots and other solar activity. When fully developed, this model would provide long term safety warnings for astronauts. In this paper, the rotation rates and initial longitudes of eleven g-mode sets are tested against observations. The paper concludes that the time series of sunspot numbers for the last century has oscillatory components with the same frequencies and temporal phases as the eleven g-mode sets.

Juckett, David A.↗

Predicting river turbidity in Pine Island Bayou using machine learning techniques coupled with variational mode decomposition

Elevated turbidity levels pose significant public health risks by facilitating the transport of harmful pollutants, including metals, organic compounds, and pathogenic microorganisms into the surface water. These conditions create serious challenges for public recreational water use and drinking water treatment, leading to economic losses and health risks. This study utilizes water monitoring data in Pine Island Bayou, Texas, and develops a Sequence-to-Sequence (S2S) model to predict turbidity using Attention-based Gated Recurrent Units with Encoder-Decoder (AT-GRU-ED) and Long Short-Term Memory (LSTM), coupled with Variational Mode Decomposition (VMD). Compared to the model without VMD, the model demonstrates satisfactory 72-hour turbidity prediction performance, achieving MAEs of 2.60 and 3.29 NTU (reductions of 53% and 58%), RMSEs of 21.08 and 31.49 NTU (reductions of 82% and 80%), and R² values of 0.96 and 0.84 on the validation and test sets, respectively. Feature importance analysis reveals that water temperature is the dominant factor influencing seasonal turbidity patterns, while real-time hourly rainfall significantly contributes to short-term variability. Turbidity typically peaks within 48 hours after rainfall events due to lagged effects from surface runoff and upstream flow. Findings suggest suspending recreational water use and water supply pumping for three days after heavy rainfall can benefit public health and improve water treatment processes. Discharges above 100 m3/s are found to accelerate sediment dilution and transport, reducing turbidity levels more quickly after the peak. In conclusion, the proposed model demonstrates reliable 72-hour turbidity prediction, supporting decision-making for water treatment plant operations and providing early warning for public recreational water use.

Deep learning↗

A new reversal mode in exchange coupled antiferromagnetic/ferromagnetic disks: distorted viscous vortex

Magnetic vortices have generated intense interest in recent years due to their unique reversal mechanisms, fascinating topological properties, and exciting potential applications. In addition, the exchange coupling of magnetic vortices to antiferromagnets has also been shown to lead to a range of novel phenomena and functionalities. Here we report a new magnetization reversal mode of magnetic vortices in exchange coupled Ir 20 Mn 80 /Fe 20 Ni 80 microdots: distorted viscous vortex reversal. In contrast to the previously known or proposed reversal modes, the vortex is distorted close to the interface and viscously dragged due to the uncompensated spins of a thin antiferromagnet, which leads to unexpected asymmetries in the annihilation and nucleation fields. Lastly, these results provide a deeper understanding of the physics of exchange coupled vortices and may also have important implications for applications involving exchange coupled nanostructures.

36 MATERIALS SCIENCE↗

Phonon modes and electron–phonon coupling at the FeSe/SrTiO 3 interface

The remarkable increase in superconducting transition temperature (T c ) observed at the interface of one-unit-cell FeSe films on SrTiO3 substrates (1 uc FeSe/STO) has attracted considerable research into the interface effects. Although this high T c is thought to be associated with electron-phonon coupling (EPC), the microscopic coupling mechanism and its role in the superconductivity remain elusive. Here we use momentum-selective high-resolution electron energy loss spectroscopy to atomically resolve the phonons at the FeSe/STO interface. We uncover new optical phonon modes, coupling strongly with electrons, in the energy range of 75-99 meV. These modes are characterized by out-of-plane vibrations of oxygen atoms in the interfacial double-TiO x layer and the apical oxygens in STO. Our results also demonstrate that the EPC strength and superconducting gap of 1 uc FeSe/STO are closely related to the interlayer spacing between FeSe and the TiOx terminated STO. These findings shed light on the microscopic origin of the interfacial EPC and provide insights into achieving large and consistent T c enhancement in FeSe/STO and potentially other superconducting systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of Zero-Frequency Fluctuations Generated by Coupling between Alfvén Modes in the JET Tokamak

We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, confinement factor H 89,P , and a reduction in the main ion heat diffusivity. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytical and Experimental Determination of the Coupled Natural Frequencies and Mode Shapes of a Dynamic Model of a Single-Rotor Helicopter

A combined analytical and experimental determination is made of the coupled natural frequencies and mode shapes in the longitudinal plane of symmetry for a dynamic model of a single-rotor helicopter. The analytical phase is worked out on the basis of a seven-degree-of-freedom system combining elastic deflections of the rotor blades, rotor shaft, pylon, and fuselage. The calculated coupled frequencies are first compared with calculated uncoupled frequencies to show the general effects of coupling and then with measured coupled frequencies to determine the extent to which the coupled frequencies can be calculated. The coupled mode shapes are also calculated and were observed visually with stroboscopic lights during the tests. A comparison of the coupled and uncoupled natural frequencies shows that significant differences exist between these frequencies for some of the modes. Good agreement is obtained between the measured and calculated values for the coupled natural frequencies and mode shapes. The results show that the coupled natural frequencies and mode shapes can be determined by the analytical procedure presented herein with sufficient accuracy if the mass and stiffness distributions of the various components of the helicopter are known.

Silveira, Milton A.↗

Actuator placement for active sound and vibration control of cylinders

Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The cylinder is excited by an exterior noise source -- an acoustic monopole -- located near the outside of the cylinder wall. The goal is to determine the force inputs and sites for the piezoelectric actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. We studied external monopole excitations at two frequencies. A cylinder resonance of 100 Hz, where the interior acoustic field is driven in multiple, off-resonance cylinder cavity modes, and a cylinder resonance of 200 Hz are characterized by both near and off-resonance cylinder vibration modes which couple effectively with a single, dominant, low-order acoustic cavity mode at resonance. Previous work has focused almost exclusively on meeting objective (1) and solving a complex least-squares problem to arrive at an optimal force vector for a given set of actuator sites. In addition, it has been noted that when the cavity mode couples with cylinder vibration modes (our 200 Hz case) control spillover may occur in higher order cylinder shell vibrational modes. How to determine the best set of actuator sites to meet objectives (1)-(3) is the main contribution of our research effort. The selection of the best set of actuator sites from a set of potential sites is done via two metaheuristics -- simulated annealing and tabu search. Each of these metaheuristics partitions the set of potential actuator sites into two disjoint sets: those that are selected to control the noise (on) and those that are not (off). Next, each metaheuristic attempts to improve this initial solution by calculating the change in the objective value when one selected actuator site is turned off and one actuator site that previously was not selected is turned on. All such pairwise exchanges are performed and the exchange that improves the objective the most is made. Eventually the search is unable to improve the objective value and a local optimum (with respect to pairwise exchanges) is reached. Both simulated annealing and tabu search provide mechanisms to escape local optima and allow the search to continue until (hopefully) a global optimum is found. Our experiments with the 100 Hz and 200 Hz cases confirm that both metaheuristics are able to uncover better solutions than those selected based upon engineering judgement alone. In addition, the high quality solutions generated by these metaheuristics, when minimizing interior noise, do not further excite the cylinder shell. Thus, we are able to meet objective (2) without imposing an additional constraint or forming a multiobjective performance measure. An additional observation is that in many cases the amplitude and phase values for several chosen actuator sites were nearly identical. This natural grouping means that fewer control channels are needed and the resulting control system is simpler. Currently no power requirements have been set, so objective (3) cannot be addressed. A set of experiments is planned with a laboratory test article (a cylinder). For these experiments the transfer matrices will be generated experimentally. It is hoped that the predicted performance of the best actuator sites found by our metaheuristics will correlate well with the measured performance.

Kincaid, Rex K.↗

Resonator modes and mode dynamics for an external cavity-coupled laser array

Employing a Fox-Li approach, we derived the cold-cavity mode structure and a coupled mode theory for a phased array of N single-transverse-mode active waveguides with feedback from an external cavity. We applied the analysis to a system with arbitrary laser lengths, external cavity design and coupling strengths to the external cavity. The entire system was treated as a single resonator. The effect of the external cavity was modeled by a set of boundary conditions expressed by an N-by-N frequency-dependent matrix relation between incident and reflected fields at the interface with the external cavity. The coupled mode theory can be adapted to various types of gain media and internal and external cavity designs.

Nair, Niketh S.↗

Optical filter having coupled whispering-gallery-mode resonators

Optical filters having at least two coupled whispering-gallery-mode (WGM) optical resonators to produce a second order or higher order filter function with a desired spectral profile. At least one of the coupled WGM optical resonators may be tunable by a control signal to adjust the filtering function.

Savchenkov, Anatoliy↗

Relatively high plasma density in low pressure inductive discharges

Electron energy probability functions (EEPFs) were measured in a low pressure argon inductive discharge. As radio frequency (RF) power increases, discharge mode is changed from E-mode (capacitively coupled) to H-mode (inductively coupled) and the EEPFs evolve from a bi-Maxwellian distribution to a Maxwellian distribution. It is found that the plasma densities at low RF powers (<30 W) are much higher than the density predicted from the slope of the densities at high powers. Because high portion of high energy electrons of the bi-Maxwellian distribution lowers the collisional energy loss and low electron temperature of low energy electrons reduces particle loss rate at low powers. Therefore, the energy loss of plasma decreases and electron densities become higher at low powers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coupling between flexural modes in free vibration of single-walled carbon nanotubes

The nonlinear thermal vibration behavior of a single-walled carbon nanotube (SWCNT) is investigated by molecular dynamics simulation and a nonlinear, nonplanar beam model. Whirling motion with energy transfer between flexural motions is found in the free vibration of the SWCNT excited by the thermal motion of atoms where the geometric nonlinearity is significant. A nonlinear, nonplanar beam model considering the coupling in two vertical vibrational directions is presented to explain the whirling motion of the SWCNT. Energy in different vibrational modes is not equal even over a time scale of tens of nanoseconds, which is much larger than the period of fundamental natural vibration of the SWCNT at equilibrium state. The energy of different modes becomes equal when the time scale increases to the microsecond range.

36 MATERIALS SCIENCE↗

Part-Per-Trillion Level SF6 Detection Using a Quartz Enhanced Photoacoustic Spectroscopy-Based Sensor with Single-Mode Fiber-Coupled Quantum Cascade Laser Excitation

A sensitive spectroscopic sensor based on a hollow-core fiber-coupled quantum cascade laser (QCL) emitting at 10.54 µm and quartz enhanced photoacoustic spectroscopy (QEPAS) technique is reported. The design and realization of mid-infrared fiber and coupler optics has ensured single-mode QCL beam delivery to the QEPAS sensor . The collimation optics was designed to produce a laser beam of significantly reduced beam size and waist so as to prevent illumination of the quartz tuning fork and micro-resonator tubes. SF6 was selected as the target gas. A minimum detection sensitivity of 50 parts per trillion in 1 s was achieved with a QCL power of 18 mW, corresponding to a normalized noise-equivalent absorption of 2.7x10-10 W•cm-1/Hz1/2.

Laser Sensors↗

Synergy of Coupled Kink and Tearing Modes in Fast Ion Transport

One aspect of the interaction between fast ions and magnetohydrodynamic (MHD) instabilities is the fast ion transport. Coupled kink and tearing MHD instabilities have also been reported to cause fast ion transport. Recently, the ''kick" model has been developed to compute the evolution of the fast ion distribution from the neutral beam injection using instabilities as phase space resonance sources. The goal of this paper is to utilize the kick model to understand the physics of fast ion transport caused by the coupled kink and tearing modes. Soft X-ray diagnostics are used to identify the mode parameters in NSTX. The comparison of neutron rates measured and computed from time-dependent TRANSP simulation with the kick model shows the coupling of kink and tearing mode is important in determination of the fast ion transport. The numerical scan of the mode parameters shows that the relative phase of the kink and tearing modes and the overlapping of kink and tearing mode resonances in the phase space can affect the fast ion transport, suggesting that the synergy of the coupled modes may be causing the fast ion transpor

Energetic Particles↗

Synergy of coupled kink and tearing modes in fast ion transport

One aspect of the interaction between fast ions and magnetohydrodynamic (MHD) instabilities is the fast ion transport. Coupled kink and tearing MHD instabilities have also been reported to cause fast ion transport. Recently, the 'kick' model has been developed to compute the evolution of the fast ion distribution from neutral beam injection using instabilities as phase-space resonance sources. Overall, the goal of this paper is to utilize the kick model to understand the physics of fast ion transport caused by the coupled kink and tearing modes. Soft x-ray diagnostics are used to identify the mode parameters in the National Spherical Torus Experiment. The comparison of neutron rates measured and computed from time-dependent TRANSP simulation with the kick model shows that the coupling of kink and tearing mode is important in determination of the fast ion transport. The numerical scan of the mode parameters shows that the relative phase of the kink and tearing modes and the overlapping of kink and tearing mode resonances in the phase space can affect the fast ion transport, suggesting that the synergy of the coupled modes may be causing the fast ion transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bandgap modes in a coupled waveguide array

This work examines a waveguide array that consists of ten Nb{sub 2}O{sub 5}/SiO{sub 2} double layers and supports a 0.63-{mu}m surface wave. The deposition of a Nb{sub 2}O{sub 5} capping layer on top of the waveguide array enables a marked increase in the wave field intensity on its surface. The efficiency of surface-wave excitation in the Kretschmann configuration can be optimised by adjusting the number of double layers. We analyse the behaviour of the Bragg mode in relation to the thickness of the layer exposed to air and the transition of this mode from the second allowed band to the first through the bandgap of the system. In addition, the conventional leaky mode converts to a surface mode and then to a guided mode. (fiber and integrated optics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗