Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMMAND CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Integrated operations/payloads/fleet analysis. Volume 3: System costs. Appendix A: Program direct costs

Individualized program direct costs for each satellite program are presented. This breakdown provides the activity level dependent costs for each satellite program. The activity level dependent costs, or, more simply, program direct costs, are comprised of the total payload costs (as these costs are strictly program dependent) and the direct launch vehicle costs. Only those incremental launch vehicle costs associated directly with the satellite program are considered. For expendable launch vehicles the direct costs include the vehicle investment hardware costs and the launch operations costs. For the reusable STS vehicles the direct costs include only the launch operations, recovery operations, command and control, vehicle maintenance, and propellant support. The costs associated with amortization of reusable vehicle investment, RDT&E range support, etc., are not included.

Source record↗
NASA NTRS1973

Panoramic attitude sensor for Radio Astronomy Explorer B

An instrument system to acquire attitude determination data for the RAE-B spacecraft was designed and built. The system consists of an electronics module and two optical scanner heads. Each scanner head has an optical scanner with a field of view of 0.7 degrees diameter which scans the sky and measures the position of the moon, earth and sun relative to the spacecraft. This scanning is accomplished in either of two modes. When the spacecraft is spinning, the scanner operates in spherical mode, with the spacecraft spin providing the slow sweep of lattitude to scan the entire sky. After the spacecraft is placed in lunar orbit and despun, the scanner will operate in planar mode, advancing at a rate of 5.12 seconds per revolution in a fixed plane parallel to the spacecraft Z axis. This scan will cross and measure the moon horizons with every revolution. Each scanner head also has a sun slit which is aligned parallel to the spin axis of the spacecraft and which provides a sun pulse each revolution of the spacecraft. The electronics module provides the command and control, data processing and housekeeping functions.

Thomsen, R.↗
NASA NTRS1973

Modular space station facilities.

The modular space station will operate as a general purpose laboratory (GPL). In addition, the space station will be able to support many attached or free-flying research and application modules that would be dedicated to specific projects like astronomy or earth observations. The GPL primary functions have been organized into functional laboratories including an electrical/electronics laboratory, a mechanical sciences laboratory, an experiment and test isolation laboratory, a hard data process facility, a data evaluation facility, an optical sciences laboratory, a biomedical and biosciences laboratory, and an experiment/secondary command and control center.

Parker, P. J.↗
NASA NTRS1973

Automatic control of the Skylab Astronaut Maneuvering Research Vehicle.

The two automatic control modes of the Astronaut Maneuvering Research Vehicle (AMRV) are analyzed: the control moment gyro (CMG) and the rate gyro (RG). The AMRV is an autonomous maneuvering unit which translates and rotates the pilot by means of hand-controller input commands. The CMG normal operation, desaturation, and cage/lock dynamics are described in terms of a realistic AMRV mass property configuration. No propellant is used for normal operation in the CMG mode, and the maximum rotation rate is 5 deg/sec about each AMRV axis. The RG attitude maneuvering and limit cycle submode dynamic are described in terms of the same AMRV mass property configuration.

Murtagh, T. B.↗
NASA NTRS1974

A brief description of the Medical Information Computer System (MEDICS)

The Medical Information Computer System (MEDICS) is a time shared, disk oriented minicomputer system capable of meeting storage and retrieval needs for the space- or non-space-related applications of at least 16 simultaneous users. At the various commercially available low cost terminals, the simple command and control mechanism and the generalized communication activity of the system permit multiple form inputs, real-time updating, and instantaneous retrieval capability with a full range of options.

Moseley, E. C.↗
NASA NTRS1972

Timing requirements for the Sanguine ELF communications system

The development of an extremely low frequency (ELF) communications system for command and control of naval forces is discussed. The basic requirements for the system are defined. Emphasis is placed on the clock requirements based on phase or time rather than frequency. The time and frequency requirements at the transmitter stations are tabulated.

Kruger, B.↗
NASA NTRS1977

Microprogramming for real-time data acquisition

Transmit microcode trap logic is conditioned by preset clock. Measurement request or issuance of command is controlled by set of software-initialized polling tables. Receive microcode trap logic is conditioned by transmit/receive hardware when response is returned on data bus.

Patella, F. J.↗
NASA NTRS1976

Preliminary analysis of long-range aircraft designs for future heavy airlift missions

A computerized design study of very large cargo aircraft for the future heavy airlift mission was conducted using the Aircraft Synthesis program (ACSYNT). The study was requested by the Air Force under an agreement whereby Ames provides computerized design support to the Air Force Flight Dynamics Laboratory. This effort is part of an overall Air Force program to study advanced technology large aircraft systems. Included in the Air Force large aircraft program are investigations of missions such as heavy airlift, airborne missile launch, battle platform, command and control, and aerial tanker. The Ames studies concentrated on large cargo aircraft of conventional design with payloads from 250,000 to 350,000 lb. Range missions up to 6500 n.mi. and radius missions up to 3600 n.mi. have been considered. Takeoff and landing distances between 7,000 and 10,000 ft are important constraints on the configuration concepts. The results indicate that a configuration employing conventional technology in all disciplinary areas weighs approximately 2 million pounds to accomplish either a 6500-n.mi. range mission or a 3600-n.mi. radius mission with a 350,000-lb payload.

Nelms, W. P., Jr.↗
NASA NTRS1976

A history of the deep space network

The Deep Space Network (DSN) has been managed and operated by the Jet Propulsion Laboratory (JPL) under NASA contract ever since NASA was formed in late 1958. The Tracking and data acquisition tasks of the DSN are markedly different from those of the other NASA network, STDN. STDN, which is an amalgamation of the satellite tracking network (STADAN) and the Manned Space Flight Network (MSFN), is primarily concerned with supporting manned and unmanned earth satellites. In contrast, the DSN deals with spacecraft that are thousands to hundreds of millions of miles away. The radio signals from these distant craft are many orders of magnitude weaker than those from nearby satellites. Distance also makes precise radio location more difficult; and accurate trajectory data are vital to deep space navigation in the vicinities of the other planets of the solar system. In addition to tracking spacecraft and acquiring data from them, the DSN is required to transmit many thousands of commands to control the sophisticated planetary probes and interplanetary monitoring stations. To meet these demanding requirements, the DSN has been compelled to be in the forefront of technology.

Corliss, W. R.↗
NASA NTRS1977

BRAVO economic study of LANDSAT follow-on

The LANDSAT Follow-On satellite consists of two major systems: the instrument module and the Multi-Mission Modular Spacecraft (MMS). The instrument module contains the thematic mapper and the five-band multispectral scanner instruments. The instrument module also includes the solar array, the tracking and data relay satellite (TDRS) antenna, and the wideband data module. The MMS contains the modularized and standardized power, propulsion, attitude control, and command and data handling subsystems. The Shuttle will be supporting the LANDSAT Follow-On system. The LANDSAT Follow-On Project plans two Delta 3910 launches. The first is scheduled for 1981; the second Delta launch will occur as needed to keep one satellite operational on orbit. The second satellite will be ready six months after the first. It could be launched any time after that. Shuttle support of the system could begin in early 1983 but would be scheduled to start after the second Delta launch.

Pritchard, E. I.↗
NASA NTRS1977

Estimates of the effectiveness of automatic control in alleviating wake vortex induced roll excursions

Estimates of the effectiveness of a model following type control system in reducing the roll excursion due to a wake vortex encounter were obtained from single degree of freedom computations with inputs derived from the results of wind tunnel, flight, and simulation experiments. The analysis indicates that the control power commanded by the automatic system must be roughly equal to the vortex induced roll acceleration if effective limiting of the maximum bank angle is to be achieved.

Tinling, B. E.↗
NASA NTRS1977

Conceptual definition of Automated Power Systems Management

Automated Power Systems Management (APSM) is defined as the capability of a spacecraft power system to automatically perform monitoring, computational, command, and control functions without ground intervention. Power systems for future planetary spacecraft must have this capability because they must perform up to 10 years, and accommodate real-time changes in mission execution autonomously. Specific APSM functions include fault detection, isolation, and correction; system performance and load profile prediction; power system optimization; system checkout; and data storage and transmission control. This paper describes the basic method of implementing these specific functions. The APSM hardware includes a central power system computer and a processor dedicated to each major power system subassembly along with digital interface circuitry. The major payoffs anticipated are in enhancement of spacecraft reliability and life and reduction of overall spacecraft program cost.

Imamura, M. S.↗
NASA NTRS1977

V/STOL hover stability impact on hover control task

Longitudinal static stability requirements for V/STOL aircraft are discussed in terms of vertical landing on a small ship at night, response of the aircraft to air turbulence, and hovering flight. The increased pilot workload encountered under these flight conditions is considered. Results of a flight simulation study performed to evaluate a specific hover control task, two control systems - attitude rate command and translational velocity command, and the pilots' performance with and without turbulence are reported. It is concluded that the translational velocity command system provides the control requirements for good spot hovering capability and reduced pilot workload.

Whitaker, A. B.↗
NASA NTRS1979

The development of the DAST I remotely piloted research vehicle for flight testing an active flutter suppression control system

The development of the DAST I (drones for aerodynamic and structural testing) remotely piloted research vehicle is described. The DAST I is a highly modified BQM-34E/F Firebee II Supersonic Aerial Target incorporating a swept supercritical wing designed to flutter within the vehicle's flight envelope. The predicted flutter and rigid body characteristics are presented. A description of the analysis and design of an active flutter suppression control system (FSS) designed to increase the flutter boundary of the DAST wing (ARW-1) by a factor of 20% is given. The design and development of the digital remotely augmented primary flight control system and on-board analog backup control system is presented. An evaluation of the near real-time flight flutter testing methods is made by comparing results of five flutter testing techniques on simulated DAST I flutter data. The development of the DAST ARW-1 state variable model used to generate time histories of simulated accelerometer responses is presented. This model uses control surface commands and a Dryden model gust as inputs. The feasibility of the concept of extracting open loop flutter characteristics from closed loop FSS responses was examined. It was shown that open loop characteristics can be determined very well from closed loop subcritical responses.

Grose, D. L.↗
NASA NTRS1979

25 kW power module evolution study

This paper presents a study of evolutionary growth concepts for the 25 kW power module to augment STS mission support future capabilities. The study aimed to establish user payload requirements, define evolution methods for system initial operational capability, and formulate a development program and conceptual designs. The payload requirements analysis focused on material processing in space, public services, and solar terrestrial observations; evolutionary system concepts were evaluated to derive the power module and system support requirements, and four reference orbits were used to construct the nominal program scenario. The mission accomodations analysis evaluated the capability of the nominal program scenario and associated power module concepts to meet user needs. Finally, the recommended modular design consisting of electric power, attitude control, thermal control, and command and data handling is described, and it is concluded that the 25 kW power module is a logical first step to support the near term NASA sortie and free-flyer mission requirements.

Overall, J. W., Jr.↗
NASA NTRS1979

25-kW power module

The 25-kW power module design and operational characteristics and the benefits for payloads are presented. The module will allow the Shuttle Orbiter to be utilized on-orbit to its optimum capability of power and duration for sortie/Spacelab missions, and will provide central power-rich base for free-flyer payloads requiring increased electrical power and on-orbit stay-times of up to 5 years. Concepts of the module in the sortie and free-flyer modes are depicted with resource capabilities for experimentation in astronomy, solar physics, solar terrestrial observations, and materials processing which require long duration and/or high power missions. In the sortie mode operation the Orbiter fuel cell will be in an idle mode, with the 25-kW module providing payload power needs, and in the free-flyer mode the module will provide power needs to multiple payloads. Design considerations, the thermal control subsystem, the attitude control subsystem, command and data handling, and the electrical power subsystem are described.

Powell, L. E.↗
NASA NTRS1980

Terminal configured vehicle program: Test facilities guide

The terminal configured vehicle (TCV) program was established to conduct research and to develop and evaluate aircraft and flight management system technology concepts that will benefit conventional take off and landing operations in the terminal area. Emphasis is placed on the development of operating methods for the highly automated environment anticipated in the future. The program involves analyses, simulation, and flight experiments. Flight experiments are conducted using a modified Boeing 737 airplane equipped with highly flexible display and control equipment and an aft flight deck for research purposes. The experimental systems of the Boeing 737 are described including the flight control computer systems, the navigation/guidance system, the control and command panel, and the electronic display system. The ground based facilities used in the program are described including the visual motion simulator, the fixed base simulator, the verification and validation laboratory, and the radio frequency anechoic facility.

Source record↗