Results for “Atomic systems” — Page 45

NASA NTRS1980

A new semiclassical decoupling scheme for electronic transitions in molecular collisions - Application to vibrational-to-electronic energy transfer

A new semiclassical decoupling scheme (the trajectory-based decoupling scheme) is introduced in a computational study of vibrational-to-electronic energy transfer for a simple model system that simulates collinear atom-diatom collisions. The probability of energy transfer (P) is calculated quasiclassically using the new scheme as well as quantum mechanically as a function of the atomic electronic-energy separation (lambda), with overall good agreement between the two sets of results. Classical mechanics with the new decoupling scheme is found to be capable of predicting resonance behavior whereas an earlier decoupling scheme (the coordinate-based decoupling scheme) failed. Interference effects are not exhibited in P vs lambda results.

Lee, H.-W.↗

NASA NTRS1980

Proposed method for degassing metals for extreme low pressures

Metal outgassing currently limits the pressures attained in vacuum chambers. The dominant residual gas in a carefully degassed metal system is usually hydrogen. The atomic hydrogen within bulk metals could be removed by diffusion processes if surface effects did not interfere. It is proposed that removing the surface hydrogen during vacuum bakeout by continuous electron bombardment (or similar irradiation) would allow the diffusion to proceed and lead to lower outgassing rates and operating pressures.

Moore, B. C.↗

NASA NTRS1982

Precise time dissemination via portable atomic clocks

The most precise operational method of time dissemination over long distances presently available to the Precise Time and Time Interval (PTTI) community of users is by means of portable atomic clocks. The Global Positioning System (GPS), the latest system showing promise of replacing portable clocks for global PTTI dissemination, was evaluated. Although GPS has the technical capability of providing superior world-wide dissemination, the question of present cost and future accessibility may require a continued reliance on portable clocks for a number of years. For these reasons a study of portable clock operations as they are carried out today was made. The portable clock system that was utilized by the U.S. Naval Observatory (NAVOBSY) in the global synchronization of clocks over the past 17 years is described and the concepts on which it is based are explained. Some of its capabilities and limitations are also discussed.

Putkovich, K.↗

NASA NTRS1984

A measurement of the vibrational band strength for the v3 band of the HO2 radical

Laboratory measurements of the v(3) band strength of HO2 using a tunable diode laser to measure the absorption strength of a vibration-rotation line in the P branch near 1080/cm are reported. The HO2 is generated in a discharge-flow system by reaction of fluorine atoms with excess H2O2: F + H2O2 - HO2 + HF. The HO2 concentration is determined from measurements of F-atom concentrations using both chemical titration with Cl2 and tunable diode laser absorption by the F-atom spin-orbit transition near 404/cm. The experimental data are consistent with a value of k(3) = (1.6 + or - 0.3) x 10 to the 12th cu cm/s and a ratio k(4)/k(1) = 1.0 + or - 0.4. The line strength for the 6(15) - 7(16)F(1) transition is 2.9 x 10 to the -21 sq cm/molecule/cm, which corresponds to a v(3) band strength of 35 + or - 9/sq cm/(STP atm). This value is a factor of 1.6 to 6 lower than previous ab initio calculations.

Zahniser, M. S.↗

NASA NTRS1986

High intensity 5 eV O-atom exposure facility for material degradation studies

An atomic oxygen exposure facility was developed for studies of material degradation. The goal of these studies is to provide design criteria and information for the manufacture of long life (20 to 30 years) construction materials for use in low Earth orbit. The studies that are being undertaken will provide: (1) absolute reaction cross sections for the engineering design problems, (2) formulations of reaction mechanisms for use in the selection of suitable existing materials and the design of new more resistant ones, and (3) the calibration of flight hardware (mass spectrometers, etc.) in order to directly relate experiments performed in low Earth orbit to ground based investigations. The facility consists of a CW laser sustained discharge source of O-atoms, an atomic beam formation and diagnostics system, a spinning rotor viscometer, and provision for using the system for calibration of actual flight instruments.

Cross, J. B.↗

NASA NTRS1995

Studies of the gas tori of Titan and Triton

Progress in the development of the model for the circumplanetary distribution of atomic hydrogen in the Saturn system produced by a Titan source is discussed. Because of the action of the solar radiation acceleration and the obliquity of Saturn, the hydrogen distribution is shown to undergo seasonal changes as the planet moves about the Sun. Preliminary model calculations show that for a continuous Titan source, the H distribution is highly asymmetric about the planet and has a density maximum near the dusk side of Saturn, qualitatively similar to the pattern recently deduced by Shemansky and Hall from observations acquired by the UVS instruments aboard the Voyager spacecrafts. The investigation of these Voyager data will be undertaken in the next project year.

Smyth, William H.↗

NASA NTRS1995

Evaluation of adhesive materials used on the Long Duration Exposure Facility

The adhesive and adhesive-like materials flown on LDEF included epoxies and silicones (including lap shear specimens), conformal coatings, potting compounds, and several tapes and transfer films. With the exception of the lap shear specimens, these materials were used in the fabrication and assembly of the experiments such as bonding thermal control surfaces to other hardware and holding individual specimens in place, similar to applications on other spacecraft. Typically, the adhesives were not exposed to solar radiation or atomic oxygen. Only one adhesive system was used in a structural application. This report documents all results of the Materials and Systems SIG investigation into the effect of long term low Earth orbit (LEO) exposure of these materials. Results of this investigation show that if the material was shielded from exposure to LDEF's external environment, the 69 month exposure to LEO had, in most cases, minimal effect on the material.

Dursch, H. W.↗

NASA NTRS1993

Faraday anomalous dispersion optical filters

The effect of Faraday anomalous dispersion optical filters on infrared and blue transitions of some alkali atoms is calculated. A composite system is designed to further increase the background noise rejection. The measured results of the solar background rejection and image quality through the filter are presented. The results show that the filter may provide high transmission and high background noise rejection with excellent image quality.

Shay, T. M.↗

NASA NTRS1993

Solar-Driven Neutral Density Waves

Interstellar neutral hydrogen atoms flowing into the solar system are attracted by the solar gravitational force, repelled by solar hydrogen Ly-alpha radiation pressure, and are ionized, primarily, through charge exchange with the solar wind protons. The solar cycle variation of the radiation pressure causes the net central solar force to fluctuate between attraction and repulsion resulting in the modulation of the neutral hydrogen density about the usual time independent model. The calculation presented here shows that the time dependent downstream density is strongly modulated by a large number of travelling neutral density waves. The waves possess a continuous range of wavelengths as is to be expected for a Maxwellian gas subjected to several eleven year cycle variations during its journey through the solar system. The amplitudes of the density modulation were found to be quite large. The backscattered glow was found to depend on the position of the detector and the phase of the solar cycle. At the most favorable condition a deviation of the order of 25% from the time dependent glow might be observed.

Blum, P.↗

NASA NTRS1994

A Comparison of Density Functional Theory with Ab initio Approaches for Systems Involving First Transition Row Metals

Density functional theory (DFT) is found to give a better description of the geometries and vibrational frequencies of FeL and FeL(sup +) systems than second order Moller Plesset perturbation theory (MP2). Namely, the DFT correctly predicts the shift in the CO vibrational frequency between free CO and the Sigma(sup -) state of FeCO and yields a good result for the Fe-C distance in the quartet states of FeCH4(+) 4 These are properties where the MP2 results are unsatisfactory. Thus DFT appears to be an excellent approach for optimizing the geometries and computing the zero-point energies of systems containing first transition row atoms. Because the DFT approach is biased in favor of the 3d(exp 7) occupation, whereas the more traditional approaches are biased in favor of the 3d(exp 6) occupation, differences are found in the relative ordering of states. It is shown that if the dissociation is computed to the most appropriate atomic asymptote and corrected to the ground state asymptote using the experimental separations, the DFT results are in good agreement with high levels of theory. The energetics at the DFT level are much superior to the MP2 and in most cases in good agreement with high levels of theory.

Ricca, Alessandra↗

NASA NTRS1994

Energy- and Structure-Related Properties for the (100) Surface of Beta-SiC

Calculations were carried out to investigate energy- and structure-related properties for the (100) surfaces of beta-SiC. Investigations for both C- and Si-terminated planes include (1 x 1), (2 x 1) and c(2 x 2) surface phases. All calculations were performed employing the empirical Tersoff function developed for SiC systems. This function has been used on several occasions, with varying sets of parameters to calculate properties for systems containing Si and C atoms. Here a comparative study was conducted. Results obtained from different sets of parameters were compared with respect to each other and also with values from the literature. Suitabilities and limitations of each parameter set were delineated.

Halicioglu, Timur↗

NASA NTRS2002

Slow Light in Coupled Resonator Optical Waveguides

Recently, we discovered that a splitting of the whispering gallery modes (WGMs) occurs in coupled resonator optical waveguides (CROWs), and that these split modes are of a higher Q than the single-resonator modes, leading to enormous circulating intensity magnification factors that dramatically reduce thresholds for nonlinear optical (NLO) processes. As a result of the enhancements in Q, pulses propagating at a split resonance can propagate much slower (faster) for over (under)-coupled structures, due to the modified dispersion near the split resonance. Moreover, when loss is considered, the mode-splitting may be thought of as analogous to the Autler-Townes splitting that occurs in atomic three-level lambda systems, i.e., it gives rise to induced transparency as a result of destructive interference. In under- or over-coupled CROWs, this coupled resonator induced transparency (CRIT) allows slow light to be achieved at the single-ring resonance with no absorption, while maintaining intensities such that NLO effects are maximized. The intensity magnification of the circulating fields and phase transfer characteristics are examined in detail.

Chang, Hongrok↗

NASA NTRS2003

Sulfur Oxidation and Contrail Precursor Chemistry

Sulfuric acid (H2SO4), formed in commercial aircraft operations via fuel-S (goes to) SO2 (goes to) SO3 (goes to) H2SO4 plays an important role in the formation of contrails. It is believed that the first step occurs inside the combustor, the second step in the engine exit nozzle, and the third step in the exhaust plume. Thus, measurements of the sulfur oxidation rates are critical to the understanding of contrail formation. Field measurements of contrails formed behind commercial aircraft indicate that significantly greater conversion of fuel-bound sulfur to sulfate aerosol occurs than can be explained by our current knowledge of contrail physics and chemistry. The conversion of sulfur from S(IV) to S(VI) oxidation state, required for sulfate aerosol formation, is thermodynamically favored for the conditions that exist within jet engines but is kinetically disfavored. The principal reaction pathway is O+SO2+M (goes to) SO3+M. The rates of this reaction have never been measured in the temperature and pressure regimes available to aircraft operation. In the first year (FY02) of this project, we performed a series of experiments to elucidate the rate information for the O+SO2+M (goes to) SO3+M reaction. The work performed is described following the proposed work plan. Because we used the H2/O2 system for an O-atom source and rate coefficients were obtained via computer simulation, construction of a reaction mechanism and either recalculation or estimation of thermodynamic properties of H(x)SO(y) species are described first.

DeWitt, Kenneth J.↗

NASA NTRS2012

Methods, systems, and apparatus for storage, transfer and/or control of information via matter wave dynamics

Methods, systems and apparatus for generating atomic traps, and for storing, controlling and transferring information between first and second spatially separated phase-coherent objects, or using a single phase-coherent object. For plural objects, both phase-coherent objects have a macroscopic occupation of a particular quantum state by identical bosons or identical BCS-paired fermions. The information may be optical information, and the phase-coherent object(s) may be Bose-Einstein condensates, superfluids, or superconductors. The information is stored in the first phase-coherent object at a first storage time and recovered from the second phase-coherent object, or the same first phase-coherent object, at a second revival time. In one example, an integrated silicon wafer-based optical buffer includes an electrolytic atom source to provide the phase-coherent object(s), a nanoscale atomic trap for the phase-coherent object(s), and semiconductor-based optical sources to cool the phase-coherent object(s) and provide coupling fields for storage and transfer of optical information.

Vestergaard Hau, Lene↗

DOE OSTI2025

Across the Scales of the Nucleus: Understanding Short Range Correlations from Medium Modification to Probe Independence

The atomic nucleus presents an intricate system due to the non-linear forces described by Quantum Chromodynamics (QCD) that govern its structure. The range of scales involved is remarkable; the most massive nuclei weigh approximately five orders of magnitude more than the quarks that compose them. The nucleus can be analyzed at various levels, from quarks to hadrons to the nucleus as a whole. Short-Range Correlations (SRCs) within the nucleus play a significant role that spans these diverse scales. At the most fundamental level, SRCs influence the interaction between nucleons. The nucleon-nucleon (NN) interaction, arising from QCD, is crucial in determining nuclear properties. SRCs serve as valuable probes for measuring this NN interaction, as the nucleons within SRCs become effectively decoupled from the rest of the nucleus. Multiple experimental techniques, including electron scattering, have been employed to investigate the NN interaction through SRCs. However, our first project demonstrates that inclusive measurements alone are inadequate to constrain this interaction fully. Moving to the scale of the nucleus, SRCs contribute to the high-momentum tail of the nuclear spectral function. While the low-momentum region is characterized by nucleons exhibiting bulk properties, nucleons begin to pair into SRCs at higher momenta. Our research aims to bridge the understanding between the mean-field portion of the nucleus and its high-momentum SRC components. Additionally, SRCs affect the quark structure of protons, as evidenced by the EMC effect, which indicates that quarks behave differently when protons are embedded within a nucleus—an effect referred to as medium modification. This thesis explores the correlation between SRCs and medium modification across various experimental setups. Finally, we seek to establish an interpretation of the nuclear ground state. Accomplishing this requires demonstrating that our SRC observables are independent of the probe’s scale and scheme. The concluding project of this thesis illustrates how we utilize triple coincidence quasi-elastic scattering across a range of (Q2) values to develop a model-dependent framework for understanding SRC distributions within the nucleus’s ground-state wavefunction.

Denniston, A. W. Denniston [University of Tel Aviv↗

NASA NTRS1982

The elemental and isotopic composition of galactic cosmic rays

Galactic cosmic rays represent samples of matter from areas outside the solar system. New information regarding the elemental composition of cosmic rays has been obtained in connection with the French-Danish experiment on HEA0-3 and recent balloon experiments. The energy dependence of the source composition is considered along with a comparison of cosmic ray and solar system abundances, and the N-14 source abundance. Attention is given to cosmic ray clocks and the Mn-54 problem, advances concerning cross section measurements, and cosmic ray isotopes. The considered new observations suggest that cosmic ray elemental abundance differences from the solar system continue to be ordered by atomic parameters such as first ionization potential, at least up through Z equals 40. The isotopic composition of the cosmic ray source is found to be unlike that of the solar system.

Mewaldt, R. A.↗

DOE OSTI2020

Characterizing Impacts of Dry Coal Feeding in High Pressure Oxy-Coal Combustion Systems

Reaction Engineering International (REI) has managed a team of experts from the University of Utah, Southeast University (SEU) in Nanjing, China, Electric Power Research Institute (EPRI), Corrosion Management Ltd. (C-M), Praxair, and Brigham Young University (BYU) to investigate dry pulverized coal feeding for pressurized oxy-coal combustion. Dry feed firing systems for entrained flow, pressurized, oxy-coal combustors have not been well developed, although related technologies have been used in the Shell Gasification Process and for pressurized fluid bed combustion. DOE-funded research recently completed at REI and the University of Utah focused on characterizing impacts of high temperatures and pressures in oxy-coal combustion systems. For high pressure combustion, that research used a coal slurry feed into a 17 bar pressurized combustor. As a consequence of that research, it was identified that fuel feeding and firing system flexibility are challenges that require attention. Based on that experience, the approach of using a coal slurry feed system leads to challenges in producing consistent atomization of the slurry, which causes burnout problems, especially at high pressures. In addition, slurry atomization processes may be difficult to scale to sizes appropriate for practical commercial use. Dry pressurized coal burner systems, on the other hand, have the potential to yield efficiency gains, improve flexibility and facilitate applications at larger scales. Experimental work was conducted at the University of Utah Industrial Combustion and Gasification Research Facility as well as the 100 kW pressurized oxy-coal combustor (POC) facility at Brigham Young University. Mechanism development and CFD-based combustion and dense-phase flow modeling were performed at REI. Successful completion of the project objectives has resulted in the following key deliverables: 1) Design and prototype of a pressurized pulverized coal feeding and oxy-firing system 2) Data from a 100kW, pressurized (15 bar) entrained flow reactor with a dry feeding delivery and burner system that describes flame characteristics, radiative heat flux profiles, carbon burnout, along with characteristics of ash aerosols, fouling, and slagging. 3) Validated and transportable models that describe the relevant conditions in pressurized oxy-combustion systems and that can be used for scale-up and optimization. 4) Principles to guide design of high pressure, pilot-scale and full-scale coal oxy-firing systems. 5) Assessment of pressurized oxy-combustion impacts on key parameters relevant to oxy-coal fired utility boilers such as coal devolatilization, char oxidation, mineral matter transformation, deposition, and corrosion. The experimental data, pressurized oxy-firing system principles, and process mechanisms provided by this work can be used by electric utilities, boiler OEMs, equipment suppliers, design firms, software vendors, consultants and government agencies to assess the use of high temperature and high pressure oxy-combustion in current research and to guide development of new oxy-coal boiler designs.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2021

Characterizing Impacts of Dry Coal Feeding in High Pressure Oxy-Coal Combustion Systems

Reaction Engineering International (REI) has managed a team of experts from the University of Utah, Southeast University (SEU) in Nanjing, China, Electric Power Research Institute (EPRI), Corrosion Management Ltd. (C-M), Praxair, and Brigham Young University (BYU) to investigate dry pulverized coal feeding for pressurized oxy-coal combustion. Dry feed firing systems for entrained flow, pressurized, oxy-coal combustors have not been well developed, although related technologies have been used in the Shell Gasification Process and for pressurized fluid bed combustion. DOE-funded research recently completed at REI and the University of Utah focused on characterizing impacts of high temperatures and pressures in oxy-coal combustion systems. For high pressure combustion, that research used a coal slurry feed into a 17 bar pressurized combustor. As a consequence of that research, it was identified that fuel feeding and firing system flexibility are challenges that require attention. Based on that experience, the approach of using a coal slurry feed system leads to challenges in producing consistent atomization of the slurry, which causes burnout problems, especially at high pressures. In addition, slurry atomization processes may be difficult to scale to sizes appropriate for practical commercial use. Dry pressurized coal burner systems, on the other hand, have the potential to yield efficiency gains, improve flexibility and facilitate applications at larger scales. Experimental work was conducted at the University of Utah Industrial Combustion and Gasification Research Facility as well as the 100 kW pressurized oxy-coal combustor (POC) facility at Brigham Young University. Mechanism development and CFD-based combustion and dense-phase flow modeling were performed at REI. Successful completion of the project objectives has resulted in the following key deliverables: 1) Design and prototype of a pressurized pulverized coal feeding and oxy-firing system 2) Data from a 100kW, pressurized (15 bar) entrained flow reactor with a dry feeding delivery and burner system that describes flame characteristics, radiative heat flux profiles, carbon burnout, along with characteristics of ash aerosols, fouling, and slagging. 3) Validated and transportable models that describe the relevant conditions in pressurized oxy-combustion systems and that can be used for scale-up and optimization. 4) Principles to guide design of high pressure, pilot-scale and full-scale coal oxy-firing systems. 5) Assessment of pressurized oxy-combustion impacts on key parameters relevant to oxy-coal fired utility boilers such as coal devolatilization, char oxidation, mineral matter transformation, deposition, and corrosion. The experimental data, pressurized oxy-firing system principles, and process mechanisms provided by this work can be used by electric utilities, boiler OEMs, equipment suppliers, design firms, software vendors, consultants and government agencies to assess the use of high temperature and high pressure oxy-combustion in current research and to guide development of new oxy-coal boiler designs.

pressurized oxy-coal combustion, sub-micron ash ae↗