SEARCH · Engineering Papers

Results for “Aerodynamic Heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Similarity constraints in testing of cooled engine parts

A study is made of the effect of testing cooled parts of current and advanced gas turbine engines at the reduced temperature and pressure conditions which maintain similarity with the engine environment. Some of the problems facing the experimentalist in evaluating heat transfer and aerodynamic performance when hardware is tested at conditions other than the actual engine environment are considered. Low temperature and pressure test environments can simulate the performance of actual size prototype engine hardware within the tolerance of experimental accuracy if appropriate similarity conditions are satisfied. Failure to adhere to these similarity constraints because of test facility limitations or other reasons, can result in a number of serious errors in projecting the performance of test hardware to engine conditions.

Colladay, R. S.↗

NASA NTRS1975

Solution of an optimal control lifting body entry problem by an improved method of perturbation functions

This paper presents a solution to a complex lifting reentry three-degree-of-freedom problem by using the calculus of variations to minimize the integral of the sum of the aerodynamics loads and heat rate input to the vehicle. The entry problem considered does not have state and/or control constraints along the trajectory. The calculus of variations method applied to this problem gives rise to a set of necessary conditions which are used to formulate a two point boundary value (TPBV) problem. This TPBV problem is then numerically solved by an improved method of perturbation functions (IMPF) using several starting co-state vectors. These vectors were chosen so that each one had a larger norm with respect to show how the envelope of convergence is significantly increased using this method and cases are presented to point this out.

Garcia, F., Jr.↗

NASA NTRS1976

Technical challenges of integrating the Space Shuttle

A review is presented of the technology involved in integrating the Space Shuttle system. A powered flight analysis of the Shuttle is presented, touching upon the following areas: ascent profile and abort mode integration, sizing and design, control of load factor by a stage thrust shaping, structural load constraints, flight performance reserve and trajectory design for the orbital flight test. A discussion is presented of aerothermodynamics including aerodynamic and plume heating. Flight control and separation is considered with attention paid to liftoff, ascent to booster staging, elevon load relief, booster tailoff thrust mismatch and gimbal limitations and booster separation. Structural analysis and dynamics is examined, considering: vehicle loads and modes and the pogo effect. Propulsion aspects (hydraulics, the LH2 recirculation system, the antigeyser system, the pressurization system, etc.), ground vibration tests, separation system verification and flight readiness firing are all described.

Martin, A. C.↗

NASA NTRS1981

Liquid Rocket Propulsion Technology: An evaluation of NASA's program

The liquid rocket propulsion technology needs to support anticipated future space vehicles were examined including any special action needs to be taken to assure that an industrial base in substained. Propulsion system requirements of Earth-to-orbit vehicles, orbital transfer vehicles, and planetary missions were evaluated. Areas of the fundamental technology program undertaking these needs discussed include: pumps and pump drives; combustion heat transfer; nozzle aerodynamics; low gravity cryogenic fluid management; and component and system life reliability, and maintenance. The primary conclusion is that continued development of the shuttle main engine system to achieve design performance and life should be the highest priority in the rocket engine program.

Source record↗

NASA NTRS1982

Evolution of shock-induced pressure on a flat-face/flat-base body and afterbody flow separation

The time-dependent, compressible Reynolds-averaged, Navier-Stokes equations are applied to solve an axisymmetric supersonic flow around a flat-face/flat-base body with and without a sting support. Important transient phenomena, not yet well understood, are investigated, and the significance of the present solution to the phenomena is discussed. The phenomena, described in detail, are as follows: the transient formation of the bow and recompression shock waves; the evolution of a pressure buildup due to diffraction of the incident shock wave in the forebody and afterbody regions, including the luminosity accompanying the pressure buildup; the separation of the flow as influenced by pressure buildup; the location of the separation and the reattachment points; and the transient period of the shock-induced base flow. The important influence of the nonsteady (transient) and steady flow on the aerodynamic characteristics, radiative heat transfer, and, thus, on the survivability or safeguard problems for an aircraft fuselage, missile, or planetary entry probe at very high flight speeds is described.

Yoshikawa, K. K.↗

NASA NTRS1983

Computer program for analysis of split-Stirling-cycle cryogenic coolers

A computer program for predicting the detailed thermodynamic performance of split-Stirling-cycle refrigerators has been developed. The mathematical model includes the refrigerator cold head, free-displacer/regenerator, gas transfer line, and provision for modeling a mechanical or thermal compressor. To allow for dynamic processes (such as aerodynamic friction and heat transfer) temperature, pressure, and mass flow rate are varied by sub-dividing the refrigerator into an appropriate number of fluid and structural control volumes. Of special importance to modeling of cryogenic coolers is the inclusion of real gas properties, and allowance for variation of thermo-physical properties such as thermal conductivities, specific heats and viscosities, with temperature and/or pressure. The resulting model, therefore, comprehensively simulates the split-cycle cooler both spatially and temporally by reflecting the effects of dynamic processes and real material properties.

Brown, M. T.↗

NASA NTRS1984

Ensemble formulation of surface fluxes and improvement in evapotranspiration and cloud parameterizations in a GCM

The influence of some modifications to the parameters of the current general circulation model (GCM) is investigated. The aim of the modifications was to eliminate strong occasional bursts of oscillations in planetary boundary layer (PBL) fluxes. Smoothly varying bulk aerodynamic friction and heat transport coefficients were found by ensemble averaging of the PBL fluxes in the current GCM. A comparison was performed of the simulations of the modified model and the unmodified model. The comparison showed that the surface fluxes and cloudiness in the modified model simulations were much more accurate. The planetary albedo in the model was also realistic. Weaknesses persisted in the models positioning of the Inter-tropical convergence zone (ICTZ) and in the temperature estimates for polar regions. A second simulation of the model following reparametrization of the cloud data showed improved results and these are described in detail.

Sud, Y. C.↗

NASA NTRS1986

Thermal, One-Dimensional Analyzer Program

Thermal, one-dimensional analyzer program enables user to predict surface temperature of fibrous, feltlike insulation exposed to some external radiant heat source or convective heating produced by aerodynamic forces. Prediction derived from readings of thermocouple embedded in material at some depth below surface. Program useful in analysis and evaluation of insulative qualities of similar or new compositions.

Patel, D. K.↗

NASA NTRS1987

Preliminary aerothermodynamic design method for hypersonic vehicles

Preliminary design methods are presented for vehicle aerothermodynamics. Predictions are made for Shuttle orbiter, a Mach 6 transport vehicle and a high-speed missile configuration. Rapid and accurate methods are discussed for obtaining aerodynamic coefficients and heat transfer rates for laminar and turbulent flows for vehicles at high angles of attack and hypersonic Mach numbers.

Harloff, G. J.↗

NASA NTRS1988

To sail the skies of Mars - Scientific ballooning on the red planet

Balloons represent a novel approach to exploring the surface of Mars. One promising aerostat system incorporates a solar-powered balloon as a means of generating diurnally varying lift and so can 'hop' across the surface, obtaining detailed information at a large number of sites. Two important areas of research and testing are underway on solar balloon technology and balloon payload design. The solar balloon concept has been demonstrated on earth, but more work is needed on a 'flyable' version for Mars. Particular attention must be paid to radiation heat transfer and aerodynamic effects. A special 'snake' payload concept has been demonstrated that allows for balloon system traverses of the surface and provides a usable instrument platform. A balloon system of this type could obtain unique surface imaging and physical and chemical data. The flight of the balloon also provides in situ atmospheric boundary-layer and circulation measurements.

Gaidos, Eric J.↗

NASA NTRS1991

Computed Hypersonic Flow About A Sharp Cone

Report describes mostly computational study of hypersonic flow about sharp cone. Part of continuing effort to understand and predict complicated aerodynamic and heat-transfer phenomena in flows over forebodies of such hypersonic vehicles as Space Shuttle and proposed National Aerospace Plane. Focuses on transition from laminar to turbulent flow, with particular reference to heat-transfer predictions.

Kaul, Upender K.↗

NASA NTRS1989

Hypersonic CFD applications at NASA Langley using CFL3D and CFL3DE

The CFL3D/CFL3DE CFD codes and the industrial use status of the codes are outlined. Comparison of grid density, pressure, heat transfer, and aerodynamic coefficience are presented. Future plans related to the National Aerospace Plane Program are briefly outlined.

Richardson, Pamela F.↗

NASA NTRS1991

Technologies for aerobraking

Aerobraking is one of the largest contributors to making both lunar and Mars missions affordable. The use of aerobraking/aeroassist over all propulsive approaches saves as much as 60 percent of the initial mass required in low earth orbit (LEO); thus, the number and size of earth to orbit launch vehicles is reduced. Lunar transfer vehicles (LTV), which will be used to transport personnel and materials from LEO to lunar outpost, will aerobrake into earth's atmosphere at approximately 11 km/sec on return from the lunar surface. Current plans for both manned and robotic missions to Mars use aerocapture during arrival at Mars and at return to Earth. At Mars, the entry velocities will range from about 6 to 9.5 km/sec, and at Earth the return velocity will be about 12.5 to 14 km/sec. These entry velocities depend on trajectories, flight dates, and mission scenarios and bound the range of velocities required for the current studies. In order to successfully design aerobrakes to withstand the aerodynamic forces and heating associated with these entry velocities, as well as to make them efficient, several critical technologies must be developed. These are vehicle concepts and configurations, aerothermodynamics, thermal protection system materials, and guidance, navigation, and control systems. The status of each of these technologies are described, and what must be accomplished in each area to meet the requirements of the Space Exploration Initiative is outlined.

Cooper, David M.↗

NASA NTRS1990

Technologies for aerobraking

Aerobraking is one of the largest contributors to making both lunar and Mars missions affordable. The use of aerobraking/aeroassist over all-propulsive approaches saves as much as 60 percent of the initial mass required in LEO, thus reducing the number and size of earth-to-orbit launch vehicles. Lunar transfer vehicles, which will be used to transport personnel and materials from LEO to lunar outposts, will aerobrake into earth's atmosphere at aproximately 11 km/sec on return from the lunar surface. Current plans for both manned and robotic missions to Mars use aerocapture during arrival at Mars and at earth return. At Mars, the entry velocities will range from about 6 to 9.5 km/sec, and at earth the return velocity will be about 12.5 to 14 km/sec. In order to successfully design aerobrakes to withstand the aerodynamic forces and heating associated with these entry velocities, as well as to make them efficient, several critical technologies must be developed. These are vehicle concepts and configurations, aerothermodynamics, thermal protection system materials, and guidance, navigation, and control systems. This paper describes the status of each of these technologies and outlines what must be accomplished in each area to meet the requirements of the Space Exploration Initiative.

Cooper, David M.↗

NASA NTRS1990

Aerobrake aerothermodynamics

The status of aerothermodynamics research applicable to aerobrake and aeroassist vehicles is summarized. Techniques that use aerodynamic forces instead of retropropulsion to decelerate vehicles for orbit changes at Mars and upon return to earth from either the moon or Mars can reduce the initial mass required in LEO by as much as 60 percent, thus reducing the number and size of earth-to-orbit launch vehicles. However, several critical technologies must be developed in order to design aerobrakes that can withstand the aerodynamic forces and heating to which the entry vehicles will be subjected. Among these is aerothermodynamics. The ultimate goal is to develop and validate codes that can, by predicting aerobrake thermal environments, be used to select and size the thermal protection and supporting structures.

Cooper, David M.↗

NASA NTRS1992

Aerodynamic flight research using the Pegasus air-launched space booster

Completed and planned flight research using the Pegasus as a research vehicle and booster for other hypersonic research vehicles is reviewed. Highlights from flights 1 and 2 are discussed and compared with some analytical results. In particular, attention is given to total vehicle aerodynamics (performance and trim), local aerodynamics (pressure and heat flux distributions), and response of the thermal protection system. Future programs will include a metallic wing test section for laminar flow studies and the use of the Pegasus to boost a research vehicle to hypersonic speeds. The proposed concepts for a dedicated hypersonic research vehicle project are also discussed.

Meyer, Robert R., Jr.↗

NASA NTRS1993

Nonequilibrium effects on the aerothermodynamics of transatmospheric and aerobraking vehicles

A 3D CFD algorithm is used to study the effect of thermal and chemical nonequilibrium on slender and blunt body aerothermodynamics. Both perfect gas and reacting gas air models are used to compute the flow over a generic transatmospheric vehicle and a proposed lunar transfer vehicle. The reacting air is characterized by a translational-rotational temperature and a vibrational-electron-electronic temperature and includes eight chemical species. The effects of chemical reaction, vibrational excitation, and ionization on lift-to-drag ratio and trim angle are investigated. Results for the NASA Ames All-body Configuration show a significant difference in center of gravity location for a reacting gas flight case when compared to a perfect gas wind tunnel case at the same Mach number, Reynolds number, and angle of attack. For the same center of gravity location, the wind tunnel model trims at lower angle of attack than the full-scale flight case. Nonionized and ionized results for a proposed lunar transfer vehicle compare well to computational results obtained from a previously validated reacting gas algorithm. Under the conditions investigated, effects of weak ionization on the heat transfer and aerodynamic coefficients were minimal.

Hassan, Basil↗

NASA NTRS1990

Summary of NASA. Lewis Research Center validation efforts

NASA Lewis Research Center personnel presented a summary of LeRC validation experiments. The subjects discussed included: iced wing, linear transonic cascade, transition duct aerodynamics, transition duct heat transfer, low speed centrifugal compressor, turbomachinery blade row interactions, and three dimensional fluid mechanics.

Gaugler, Raymond E.↗