SEARCH · Engineering Papers

Results for “Additively Manufacturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

NASA NTRS2014

TPSAS-NF1676L-19134-DND

Composite materials and structures are state-of-art enabling technology for modern aerospace vehicles, reducing weight and maintenance requirements, and increasing performance and reliability. Numerical-control manufacturing systems, including automated fiber placement (AFP), are widely used to fabricate these components. However, the challenging weight and performance requirements necessary for the next generation of aerospace vehicles will push the composites state-of-art even further, and require development of even more advanced materials, manufacturing, and structures technologies that are more affordable and more efficient. The Integrated Structural Assembly of Advanced Composites (ISAAC) system is intended to address many of NASA's critical research needs in the field of advanced composites. The baseline ISAAC system, combining a commercial robot with multiple degrees of freedom, a tool changer interface, and a special-purpose AFP end effector, will enable very precise and accurate additive manufacturing of composite structures. One promising area of research enabled by the ISAAC system is advanced composite tow-steered structures that have tailored structural load paths. Several examples are presented that describe these tow-steered composite structures in more detail.

Brian K Stewart↗

NASA NTRSDate not supplied

NASA's Compact High-Efficiency Rotating Detonation Rocket Engine for Mars Interplanetary Missions

NASA has successfully test fired a novel and compact liquid propulsion system known as a Rotating Detonation Rocket Engine. This is a specially designed ring-shaped thrust chamber that leverages additive manufacturing techniques and novel alloys such as GRCop-42 and GRX-810. The extreme combustion event, known as a detonation, reduces the combustion chamber length requirements down to a few inches while equivalent constant pressure rocket thrust chambers are on the order of feet. This is primarily due to rapid completion of combustion by the high-pressure detonation, an order of magnitude faster than deflagration combustion. In addition, the ring shape allows for rapid expansion of the combustion products. Depending on the thrust class and design supersonic area ratio, the full RDRE can be anywhere from 10% to 50% shorter than a traditional liquid rocket assuming the same exit diameter but is dependent on a number of design assumptions. This may enable substantial mass savings, cost savings, and broader design trade space for various mission architectures. Finally, the engine system has potential for higher Isp at identical average chamber pressure, which is currently being assessed by NASA. Experimental data obtained from testing in 2022 identified the feasibility of the novel propulsion system while multiple test series scheduled throughout 2023 and 2024 target closing the remaining critical technical gaps preventing widespread use of the technology amongst industry.

Thomas Teasley↗

NASA NTRSDate not supplied

Correlated Electromagnetic Levitation Actuator: A Reaction Sphere Based Attitude Control System

To address problems experienced by current reaction wheels and control moment gyroscopebased attitude control systems (ACS), researchers at NASA’s Marshall Space Flight Center have begun developing a reaction sphere actuator based on correlated electromagnetic levitation that will be immune to destructive bearing friction, momentum saturation, and gimbal lock. The Correlated Electromagnetic Levitation Actuator (CELA) advances the state of the art of reaction sphere ACSs by employing the concept of correlated magnetics. It is a frictionless, direct-drive reaction sphere that harnesses a unique technology with an array of applications across multiple disciplines. Correlated electromagnets function in a manner that is analogous to a matched filter; the convolution of two signals is peaked at the index representing the greatest match. For CELA, the signals are the patterns of magnetic flux density as a function of position. The magnitude of the convolution equates to an attractive or repulsive force, and these forces can be azimuthal or radial. The development of CELA is based in four distinct disciplines: Advanced Manufacturing, Prototype Development, Electromagnetic Modeling, and Controls. We are developing novel manufacturing techniques required to build arrays of permanent and electromagnet dipoles on curved surfaces. To print the permanent magnetic array, we have developed a probe with pyramidal magnets that will reside on a robotic arm to induce localized magnetic fields on a surface. The probe also includes the ability to erase dipole patterns from a permanent magnet by heating the surface to its Curie temperature. A number of test articles and prototypes have been developed using additive manufacturing methods. These prototypes have included hemispherical motors to test the drive algorithm, and a levitation test bed that demonstrates a magnetic bearing method based on attractive magnetic forces and ratiometric Hall effect sensors. We developed an array of electromagnetic dipoles on a printed circuit board (PCB) with individual H-bridges controlling each coil. This device created various flux density patterns and we measured their magnetic fields using a custom Hall effect 3-D probe and a LabVIEW virtual instrument. These data will serve as a benchmark for characterizing the accuracy of future models. Current work is focused on modeling the magnetic fields of our prototype arrays using COMSOL Finite Element Analysis and verifying the model against our test data. Accurate modeling will allow us to quickly test new patterns of electromagnets and their macro behavior. Eventually, the magnetic field models will be implemented in our controls simulations to facilitate precise control of the reaction sphere. Initial model results agree with field measurements to within 1 G (5% of measured flux density). Currently, we are testing different material properties of the electromagnets and their magnetic fields and thermal effects. These results will be used to refine the design of the electromagnetic dipoles. Our control efforts have centered on developing commutation, levitation, and field pattern shaping hardware in the form of breadboards and PCBs with software running on a local microcontroller. In addition, our partners developed MATLAB Simulink models to demonstrate a PID controller thatmitigates disturbance forces resulting from the interaction of drive and levitation magnetics. Finally, we have designed a three-axis test stand that will be used in future work to demonstrate CELA’s orientation control capability.

controls↗

NASA NTRSDate not supplied

Correlated Electromagnetic Levitation Actuator: A Reaction Sphere-Based Attitude Control System

To address problems experienced by current reaction wheels and control moment gyroscopebased attitude control systems (ACS), researchers at National Aeronautics and Space Administration’s (NASA’s) Marshall Space Flight Center (MSFC) have begun developing a reaction sphere actuator based on correlated electromagnetic levitation that will be immune to destructive bearing friction, momentum saturation, and gimbal lock. The Correlated Electromagnetic Levitation Actuator (CELA) advances the state of the art of reaction sphere ACSs by employing the concept of correlated magnetics. It is a frictionless, direct-drive reaction sphere that harnesses a unique technology with an array of applications across multiple disciplines. Correlated electromagnets function in a manner that is analogous to a matched filter; the convolution of two signals is peaked at the index representing the greatest match. For CELA, the signals are the patterns of magnetic flux density as a function of position. The magnitude of the convolution equates to an attractive or repulsive force, and these forces can be azimuthal or radial. The development of CELA is based in four distinct disciplines: Advanced Manufacturing, Prototype Development, Electromagnetic Modeling, and Controls. We are developing novel manufacturing techniques required to build arrays of permanent and electromagnet dipoles on curved surfaces. To print the permanent magnetic array, we have developed a probe with pyramidal magnets that will reside on a robotic arm to induce localized magnetic fields on a surface. We have also used high temperature ovens to erase dipole patterns from a permanent magnet by heating the surface to its Curie temperature. A number of test articles and prototypes have been developed using additive manufacturing methods. These prototypes have included hemispherical motors to test the drive algorithm, and a levitation test bed that demonstrates a magnetic bearing method based on attractive magnetic forces and ratiometric Hall effect sensors. We developed an array of electromagnetic dipoles on a printed circuit board (PCB) with individual H-bridges controlling each coil. This device created various flux density patterns and we measured their magnetic fields using a custom Hall effect 3-D probe and a LabVIEW virtual instrument. These data will serve as a benchmark for characterizing the accuracy of future models. Current work is focused on modeling the magnetic fields of our prototype arrays using COMSOL finite element analysis (FEA) and verifying the model against our test data. Accurate modeling will allow us to quickly test new patterns of electromagnets and their macro behavior. Eventually, the magnetic field models will be implemented in our controls simulations to facilitate precise control of the reaction sphere. Initial model results agree with field measurements to within 1 G (5% of measured flux density). Currently, we are testing different material properties of the electromagnets and their magnetic fields and thermal effects. These results will be used to refine the design of the electromagnetic dipoles. Our control efforts have centered on developing commutation, levitation, and field pattern shaping hardware in the form of breadboards and PCBs with software running on a local microcontroller. In addition, our partners developed MATLAB Simulink models to demonstrate a PID controller that mitigates disturbance forces resulting from the interaction of drive and levitation magnetics. Finally, we have designed a three-axis test stand that will be used in future work to demonstrate CELA’s orientation control capability.

reaction sphere↗

NASA NTRSDate not supplied

Voxel Based Three-Dimensional Topology Optimization of Heat Exchanger Fins

Increasing interest in novel aircraft propulsion systems and potential for unwanted heat generation, or capture and reuse of waste heat, may require increasingly lightweight and high performing heat exchangers. Advances in manufacturing technologies have shown potential to create complex designs, but design tools need more flexibility. This study utilizes genetic algorithm-driven topology optimization to develop high performance heat exchanger fins for critical applications such as aerospace. The solid domain is generated using voxel representation where a voxel value of 1 indicates the solid domain and a voxel value of 0 refers to the fluid domain. The use of voxel representation somewhat matches the digitization of a model that is required to fabricate using additive manufacturing, and also allows for a highly unconstrained geometry. To test the topology optimization approach, a three-dimensional(3D)baseline offset strip fin geometry in steady laminar flow(Reynolds number = 215)with conjugate heat transfer(simultaneous solution of solid and fluid temperature fields)is optimized. New designs are generated using the genetic algorithm (GA) and sent to evaluation by the CFD software OpenFOAM; then the GA sorts and selects the reproduction pool for the following generation. This process is repeated for 60 generations. The study also investigates the effect off in material on the performance of the GA and the resulting designs. The results show that the optimal designs have overall performance improvement of 18% relative to the baseline. Additionally, a fin constructed of a lower conductivity material (such as an Inconel super alloy that might be necessary for waste heat recovery applications)results in lower overall performance improvement (11%)and optimal designs with higher pressure drop relative to their baseline, and relative to optimal designs produced using higher conductivity materials.

3D Optimization↗

NASA NTRS2024

Metal Extraction from Trash via Trash-to-Gas Processing for Use in 3D Printing

This work synergized state-of-the-art trash-to-gas (TtG) and in-space manufacturing (ISM) technologies to successfully extract metals from astronaut waste items for use in 3D printing. This was accomplished by isolating pure aluminum (Al 1235) from astronaut multilayer food packaging via TtG processing, cleaning the extracted aluminum, and preparing it for compatibility with the bound metal deposition (BMD) 3D printing process. A suite of material analyses was performed on the extracted aluminum product to fully characterize the key properties linked to effective additive manufacturing, including particle size distribution, oxygen content quantitation, and elemental composition. Metal extraction from Lunar and Martian regolith has become a significant area of interest for the in-situ resource utilization (ISRU) community to produce metallic equipment for various mission scenarios. However, the extraction of metals from astronaut waste streams has yet to be investigated. This project demonstrated an end-to-end waste metallic reuse process which may garner considerable metal production that would otherwise be disposed of.

Ray Pitts↗

NASA NTRS2020

Efficient Thermal Management for Sampling Arm Actuators

An electric actuator incorporating novel features for thermal management is designed and analyzed. Reducing intra-actuator thermal resistance is not only beneficial for cold missions (helping to pre-heat the gearbox) but can also enable high power applications in benign environments. The proposed design increases the thermal conductance between the motor windings and the motor casing by at least two orders of magnitude over the state of practice actuator designs. The design leverages Additive Manufacturing (AM) to integrate a complex 3 dimensional Oscillating Heat Pipe (OHP) directly within the actuator structure. A baseline actuator without this thermal management feature was fabricated. Testing was conducted to evaluate the temperature difference between actuator components at a range of motor winding heat dissipations. An analysis of a proposed revised design incorporating OHPs into the input structure indicated an increase in the effective thermal conductivity of 8 and 22 times for the nominal and start-up modes respectively. In addition, the thermal conductance between the windings and the input structure is increased by a factor of 90, and the thermal conductance between the windings and the gear assembly is increased by a factor of 200 with the proposed design.

Odagiri, Kimihide↗

NASA NTRS2015

3D Printing of Advanced Biocomposites on Earth and Beyond

Manufacturing↗

NASA NTRS2016

Synthetic Biology as an Enabling Technology for Space Exploration

Human exploration off planet is severely limited by the cost of launching materials into space and by re-supply. Thus materials brought from Earth must be light, stable and reliable at destination. Using traditional approaches, a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because life can replicate and repair itself, and perform a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology enhances and expands life's evolved repertoire. Using organisms as feedstock, additive manufacturing through bioprinting will make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. This new approach and the resulting novel products will enable human exploration and settlement on Mars, while providing new manufacturing approaches for life on Earth.

Synthetic biology↗

NASA NTRS2021

A Summary of Normal Incidence Tube Tests of NASA'S Bio-inspired Broadband Acoustic Absorber

Motivated by the need to reduce noise pollution from aircraft engines, NASA has continued to design, manufacture and test recently patented structures that mimic the geometry and the broadband and low frequency acoustic absorption of assemblies of natural reeds. This report documents a screening test, which is a precursor to more controlled modelling experiments. The purpose of this experiment was to identify variables and prototype design features that might play a dominant role in the acoustic performance of these structures. To date, twenty-four prototypes, each with an overall shape of a cube (nominally 50 mm x 50 mm x 50 mm), were designed and additively manufactured from thermoplastics using a Fused Filament Fabrication technique. The prototypes were tested in the NASA Glenn and Langley Normal Incidence Tubes to experimentally determine the acoustic absorption as a function of frequency from 400 Hz to 3000 Hz. Results indicate that a variety of structures exhibit substantial acoustic absorption in that frequency range, with an average absorption coefficient greater than 0.6, especially in the frequency range of 400 Hz to 1000 Hz. Six basic prototype designs were chosen to inform future modeling research. Results of these experiments can be used to evaluate existing physics-based models of the interaction of sound waves with these structures or to develop new models. Validated physics-based models of these structures can help engineers optimize the designs for different commercial noise control applications.

Acoustics↗

NASA NTRSDate not supplied

High Performance Rotating Detonation Rocket Engine for Mars Interplanetary Transport

NASA has successfully evaluated the performances and survivability of two additively manufactured (AM) continuously rotating detonation cycle rocket engine (RDRE) thrust chambers. The AM hardware was subjected to long duration continuous detonative environments in excess of 100 seconds. Performance trends were directly compared to theory and similar scale constant pressure engines with identical propellants. The performance benefits of RDREs include higher combustion efficiency at a more compact design trade space, which allow advantages for future NASA missions. A major finding of this work is that the heat fluxes experienced are substantially higher than traditional liquid rocket engines at the same operating conditions. In addition, completion of combustion occurs rapidly in an annular geometry at ¼ that of the L* and L’ of an equivalent state-of-the-art thrust chamber. Finally, all hardware survived the extreme environments and achieved the major goal of the test project by demonstrating hot fire conditions with detonation modes up to 133 seconds in duration. Follow-on efforts funded by STMD Early Career Initiative (ECI) award are now focused on achieving higher performances than the previous designs and closing the remaining technology risks.

Thomas Teasley↗

NASA NTRS2015

3D Printing of Advanced Biocomposites on Earth and Beyond

Human exploration off planet is severely limited by the cost of launching materials into space and re-supply. Thus materials brought from earth must be light, stable and reliable at destination. Using traditional approaches a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because it can replicate and repair itself, and do a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology can greatly enhance and expand life's evolved repertoire. Using natural and synthetically altered organisms as the feedstock for additive manufacturing could one day make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. To this end our lab has produced a proof-of-concept bioprinter with nearly one-cell resolution. Genetically engineering yeast cells to secrete bioproducts subsequent to printing allows the potential to make biomaterials with a fine microstructure. Imagine a production system that, at a few micron scale resolution, can add mollusk shell for compressive strength per unit mass, spider silk or collagen for tensile strength per unit mass, and potentially biologically-deposited wires. Now imagine what new products can be enabled by such a technology, on earth or beyond

Metals↗

NASA NTRS2014

3D Printing of Advanced Biocomposites on Earth and Beyond

Biology↗

NASA NTRSDate not supplied

Modified Rosenthal Solution for Prediction of In Situ Alloyed GRCop-42 Melt Pool

Literature suggests that the energy needed to in-situ alloy material via additive manufacturing is higher per unit volume than their pre-alloyed counterparts, often despite the in-situ formation of thermodynamically favorable phases. This work, via experiments on in-situ alloyed GRCop-42 (Cu-4 at% Cr-2 at% Nb), will explore the energy needs of an elemental powder blend during in-situ alloying via laser powder bed fusion (LPBF). Empirically derived models will explore the influence of elemental thermophysical properties, net energy of in-situ reactions, and powder characteristics on the resulting LPBF energy demands, weld pool size and shape, and porosity evolution. Additionally, the influence of energy input during printing on the in-situ reaction to form Cr2Nb will be explored. Evolution of Cr2Nb dispersoid and copper grain shape, size, and texture can be related to the temperature reached, cooling rate, and time-as-melt during in-situ alloying via LPBF.

David Scannapieco↗

NASA NTRSDate not supplied

Effect of Tungsten L-PBF Feedstock Modification on Performance in Bending

Additively manufactured tungsten is a candidate refractory material for high-temperature aerospace and nuclear fusion/fission applications. The printability of pure tungsten is challenged by cracking defects arising from the metal’s high ductile-to-brittle transition temperature and low solubility of interstitial impurities. Furthermore, the cast microstructure inherent to the laser powder bed fusion (L-PBF) process has limited strength compared to worked microstructures common in wrought tungsten. Aside from process-related techniques to mitigate defects and increase strength (e.g., heated build chambers, multi-laser systems, low oxygen environmental control, etc.), micro-alloying additions can positively influence tungsten printability. In this work, pure tungsten L-PBF feedstock was modified with 1 wt% additions of ceramic compound nano-powders. Wrought and printed bars were evaluated in four-point bending. Flexural strength and fractography were primary means of comparison to assess the effect of the feedstock modification on printed tungsten mechanical performance.

Tungsten-based alloys↗

NASA NTRS2017

NASA's In-Space Manufacturing Project: A Roadmap for a Multimaterial Fabrication Laboratory in Space

Human space exploration to date has been limited to low Earth orbit and the moon. The International Space Station (ISS) provides a unique opportunity for NASA to partner with private industry for development and demonstration of the technologies needed to support exploration initiatives. One challenge that is critical to sustainable and safer exploration is the ability to manufacture and recycle materials in space. This paper provides an overview of NASA's in-space manufacturing (ISM) project, its past and current activities (2014-2017), and how technologies under development will ultimately culminate in a multimaterial fabrication laboratory ("ISM FabLab") to be deployed on the International Space Station in the early 2020s. ISM is a critical capability for the long endurance missions NASA seeks to undertake in the coming decades. An unanticipated failure that can be adapted for in low earth orbit, through a resupply launch or a return to earth, may instead result in a loss of mission while in transit to Mars. To have a suite of functional ISM capabilities that are compatible with NASA's exploration timeline, ISM must be equipped with the resources necessary to develop these technologies and deploy them for testing prior to the scheduled de-orbit of ISS in 2024. The presentation provides a broad overview of ISM projects activities culminating with the Fabrication Laboratory for ISS. In 2017, the in-space manufacturing project issued a broad agency announcement for this capability. Requirements of the Fabrication Laboratory as stated in the solicitation will be discussed. The FabLab will move NASA and private industry significantly closer to changing historical paradigms for human spaceflight where all materials used in space are launched from earth. While the current ISM FabLab will be tested on ISS, future systems are eventually intended for use in a deep space habitat or transit vehicle. The work of commercial companies funded under NASA's Small Business Innovative Research Program (SBIR) is also discussed, as these activities, from development of recyclable packaging for ISS to additive manufacturing capabilities for metals and electronics, could also potentially be infused into future exploration capabilities. Key data from ISM projects to date will also be summarized.

Prater, Tracie↗

NASA NTRS2018

Needs and Opportunities in the Development of Advanced Materials and Manufacturing Methods for Future Long-Duration Human Space Exploration

Weight, functionality, and sustainability are all critical concerns for future, long-duration, human exploration of space. Exploration missions will be mass-limited, since the amount of supplies and instruments that future astronauts will be able to take with them will be limited by launch vehicle and spacecraft mass and efficiency. Astronauts will need to have the capability to repair or replace worn-out or broke hardware and produce new components to be able to function for long periods at locations far-removed from Earth. Ultra-lightweight, multifunctional materials will be required to enable significant reductions in launch vehicle, spacecraft, and habitat mass in order to maximize payload. "Mass-less Exploration" concepts must be developed that will recycle materials and waste and convert available planetary materials into new feedstock materials and utilize in-space additive manufacturing to use these materials to produce the

composites↗

NASA NTRS2024

ECI Final Report: Closing of Critical Technology Gaps for Rotating Detonation Rocket Engines

NASA has successfully fired several configurations of a dual regenerative 10K lbf class Rotating Detonation Rocket Engines using cryogenic liquid methane, liquid hydrogen, and RP-1 as fuel and liquid or gaseous oxygen as the oxidizer. In addition, 3 hot fire test phases were conducted to evaluate parametrically varying combustor geometries using a subscale 500-1K lbf class thruster RDRE. Several studies were successfully completed to evaluate the impacts of contraction ratio, annulus L’, heat transfer through calorimetry, and varying injector designs. Laser powder bed fusion GRCop-42, GRX-810, and C-103 alloys were used for the outer bodies, inner bodies, nozzles, and injector variations. The development of RDRE technology is only now possible with additive manufacturing techniques and these specialized alloys. Critical design parameters, design rules of thumb, and operability limitations have been identified. Major lessons learned in the development of critical components have also been documented. All critical technology gaps have been demonstrated at one scale or another and closed. A major finding of this work is that the combustion efficiency of the RDRE is far superior to that of the traditional liquid rocket engine requiring an order of magnitude lower chamber volume and residence time to react. Because of this, the design trade space opens up significantly. More compact chamber geometries are now possible with potential mass savings and significant length savings possible to flight geometries. In addition, the ceiling for the technology, in terms of Isp, has not yet been reached. It is likely that an additional ~10% better Isp over equivalent state-of-the-art combustion devices may be achieved over the next decade should the technology continue to be developed. This technology has been shown to be viable for near term infusion (2-5 years) into space missions and enable cost effective space access for US industry. This final report documents all major findings from this early career initiative (ECI) project and lays out what is needed post ECI.

Thomas Teasley↗