Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Reduction in biomass burning aerosol light absorption upon humidification: Roles of inorganically-induced hygroscopicity, particle collapse, and photoacoustic heat and mass transfer

Smoke particle emissions from the combustion of biomass fuels typical for the western and southeastern United States were studied and compared under high humidity and ambient conditions in the laboratory. The fuels used are Montana ponderosa pine (Pinus ponderosa), southern California chamise (Adenostoma fasciculatum), and Florida saw palmetto (Serenoa repens). Information on the non-refractory chemical composition of biomass burning aerosol from each fuel was obtained with an aerosol mass spectrometer and through estimation of the black carbon concentration from light absorption measurements at 870 nm. Changes in the optical and physical particle properties under high humidity conditions were observed for hygroscopic smoke particles containing substantial inorganic mass fractions that were emitted from combustion of chamise and palmetto fuels. Light scattering cross sections increased under high humidity for these particles, consistent with the hygroscopic growth measured for 100 nm particles in HTDMA measurements. Photoacoustic measurements of aerosol light absorption coefficients reveal a 20% reduction with increasing relative humidity, contrary to the expectation of light absorption enhancement by the liquid coating taken up by hygroscopic particles. This reduction is hypothesized to arise from two mechanisms: 1. Shielding of inner monomers after particle consolidation or collapse with water uptake; 2. The contribution of mass transfer through evaporation and condensation at high relative humidity to the usual heat transfer pathway for energy release by laser heated particles in the photoacoustic measurement of aerosol light absorption. The mass transfer contribution is used to evaluate the fraction of aerosol surface covered with liquid water solution as a function of RH.

09 BIOMASS FUELS↗

The impact of biogenic carbon emissions on aerosol absorption inMexico City

In order to determine the wavelength dependence of atmospheric aerosol absorption in the Mexico City area, the absorption angstrom exponents (AAEs) were calculated from aerosol absorption measurements at seven wavelengths obtained with a seven-channel aethalometer during two field campaigns, the Mexico City Metropolitan Area study in April 2003 (MCMA 2003) and the Megacity Initiative: Local and Global Research Observations in March 2006 (MILAGRO). The AAEs varied from 0.76 to 1.56 in 2003 and from 0.54 to 1.52 in 2006. The AAE values determined in the afternoon were consistently higher than the corresponding morning values, suggesting the photochemical formation of absorbing secondary organic aerosols (SOA) in the afternoon. The AAE values were compared to stable and radiocarbon isotopic measurements of aerosol samples collected at the same time to determine the sources of the aerosol carbon. The fraction of modern carbon (fM) in the aerosol samples, as determined from {sup 14}C analysis, showed that 70% of the carbonaceous aerosols in Mexico City were from modern sources, indicating a significant impact from biomass burning during both field campaigns. The {sup 13}C/{sup 12}C ratios of the aerosol samples illustrate the significant impact of Yucatan forest fires (C-3 plants) in 2003 and local grass fires (C-4 plants) at site T1 in 2006. A direct comparison of the fM values, stable carbon isotope ratios, and calculated aerosol AAEs suggested that the wavelength dependence of the aerosol absorption was controlled by the biogenically derived aerosol components.

54 ENVIRONMENTAL SCIENCES↗

A Novel Absorption Cycle for Combined Water Heating, Dehumidification, and Evaporative Cooling

In this study, development of a novel system for combined water heating, dehumidification, and space evaporative cooling is discussed. Ambient water vapor is used as a working fluid in an open system. First, water vapor is absorbed from an air stream into an absorbent solution. The latent heat of absorption is transferred into the process water that cools the absorber. The solution is then regenerated in the desorber, where it is heated by a heating fluid. The water vapor generated in the desorber is condensed and its heat of phase change is transferred to the process water in the condenser. The condensed water can then be used in an evaporative cooling process to cool the dehumidified air exiting the absorber, or it can be drained if primarily dehumidification is desired. Essentially, this open absorption cycle collects space heat and transfers it to process water. This technology is enabled by a membrane-based absorption/desorption process in which the absorbent is constrained by hydrophobic vapor-permeable membranes. Constraining the absorbent film has enabled fabrication of the absorber and desorber in a plate-and-frame configuration. An air stream can flow against the membrane at high speed without entraining the absorbent, which is a challenge in conventional dehumidifiers. Furthermore, the absorption and desorption rates of an absorbent constrained by a membrane are greatly enhanced. Isfahani and Moghaddam (Int. J. Heat Mass Transfer, 2013) demonstrated absorption rates of up to 0.008 kg/m2s in a membrane-based absorber and Isfahani et al. (Int. J. Multiphase Flow, 2013) have reported a desorption rate of 0.01 kg/m2s in a membrane-based desorber. The membrane-based architecture also enables economical small-scale systems, novel cycle configurations, and high efficiencies. The absorber, solution heat exchanger, and desorber are fabricated on a single metal sheet. In addition to the open arrangement and membrane-based architecture, another novel feature of the cycle is recovery of the solution heat energy exiting the desorber by process water (a process-solution heat exchanger ) rather than the absorber exiting solution (the conventional solution heat exchanger ). This approach has enabled heating the process water from an inlet temperature of 15 C to 57 C (conforming to the DOE water heater test standard) and interfacing the process water with absorbent on the opposite side of a single metal sheet encompassing the absorber, process-solution heat exchanger, and desorber. The system under development has a 3.2 kW water heating capacity and a target thermal coefficient of performance (COP) of 1.6.

Absorption Heat Pump↗

In situ Monitoring of Lanthanide Reactions with Oxide Species via Combined Absorption Spectroscopy and Electrochemical Methods

Molten salts for engineering scale applications of spent nuclear fuel pyrochemical processing will inevitably have some level of oxygen impurities which can form insoluble oxide and oxychloride species with fission products. This work demonstrates real-time concentration monitoring of two lanthanide (Ln3+) fission products, Nd3+ and Pr3+, and their reactions with oxygen (O2-) impurities to form insoluble products in LiCl-NaCl-KCl eutectic salt. Combined absorption spectroscopy and electrochemical testing were used to track lanthanide concentrations. O2- impurity levels were controlled by adding Li2O to lanthanide-salt solutions. After the introduction of O2- impurities, Ln3+ concentrations were monitored via time-resolved absorption spectroscopy. Concentrations of both Ln3+ species in solution decreased with time as insoluble products formed. The initial impurity concentration controlled whether insoluble products were predominantly oxychlorides or mixtures of oxychlorides and oxides. However, absorption spectroscopy is limited for weakly absorbing species, such as Pr3+, and under conditions of high impurity concentrations where solutions can be turbid. To circumvent this limitation, the concentrations of Pr3+ were monitored with square wave voltammetry (SWV). Reaction rates and extent of Pr3+ removal from solution as monitored by SWV agreed closely with results found from spectroscopic monitoring. This demonstrates that simultaneous electrochemical testing complements the capabilities of absorption spectroscopy to monitor reactions of fission products in molten salts.

absorption spectroscopy↗

In situ monitoring of lanthanide reactions with oxide species via combined absorption spectroscopy and electrochemical methods

Molten salts for engineering scale applications of spent nuclear fuel pyrochemical processing will inevitably have some level of oxygen impurities which can form insoluble oxide and oxychloride species with fission products. This work demonstrates real-time concentration monitoring of two lanthanide (Ln3+) fission products, Nd3+ and Pr3+, and their reactions with oxygen (O2-) impurities to form insoluble products in LiCl-NaCl-KCl eutectic salt. Combined absorption spectroscopy and electrochemical testing were used to track lanthanide concentrations. O2- impurity levels were controlled by adding Li2O to lanthanide-salt solutions. After the introduction of O2- impurities, Ln3+ concentrations were monitored via time-resolved absorption spectroscopy. Concentrations of both Ln3+ species in solution decreased with time as insoluble products formed. The initial impurity concentration controlled whether insoluble products were predominantly oxychlorides or mixtures of oxychlorides and oxides. However, absorption spectroscopy is limited for weakly absorbing species, such as Pr3+, and under conditions of high impurity concentrations where solutions can be turbid. To circumvent this limitation, the concentrations of Pr3+ were monitored with cyclic voltammetry (CV). Reaction rates and extent of Pr3+ removal from solution as monitored by CV agreed closely with results found from spectroscopic monitoring. This demonstrates that simultaneous electrochemical testing complements the capabilities of absorption spectroscopy to monitor reactions of fission products in molten salts.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Excited-State Bond Contraction and Charge Migration in a Platinum Dimer Complex Characterized by X-ray and Optical Transient Absorption Spectroscopy

Interactions between metal centers in dimeric transition metal complexes (TMCs) play important roles in their excited-state energetics and pathways, and, thus, affect their photophysical properties relevant to their applications, e.g., photoluminescent materials and photocatalysis. In this study, we report electronic and nuclear structural dynamics studies of two photoexcited pyrazolate-bridged [Pt(ppy)(µ-R 2 pz)] 2 -type Pt(II) dimers (ppy = 2-phenylpyridine, µ-R 2 pz = 3,5-substituted pyrazolate): [Pt(ppy)(µ-H 2 pz)] 2 (1) and [Pt(NDI-ppy)(µ-Ph 2 pz)] 2 (2, NDI = 1,4,5,8-naphthalenediimide), both of which have distinct ground state Pt-Pt distances. X-ray transient absorption spectroscopy at the Pt L III -edge revealed a new d-orbital vacancy due to the one-electron oxidation of the Pt centers in 1 and 2. However, while a transient Pt-Pt contraction was observed in 2, such an effect was completely absent in 1, demonstrating how the excited states of these complexes are determined by the overlap of the Pt (d z 2 ) orbitals, which is tuned by steric bulk of the pyrazolate R-groups in the 3- and 5-positions. In tandem with analysis of the Pt-Pt distance structural parameter, we observed photoinduced charge separation in 2 featuring a covalently linked NDI acceptor on the ppy ligand. The formation and subsequent decay of the NDI radical anion absorption signals were detected upon photoexcitation using optical transient absorption spectroscopy. The NDI radical anion decayed on the same timescale, hundreds of picoseconds, as that of the d-orbital vacancy signal of the oxidized Pt-Pt core observed in the XTA measurements. The data indicated ultrafast formation of the charge-separated state and subsequent charge recombination to the original Pt(II-II) species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Structural Evolution of the Hydrated Electron in Water Cluster Anions (H 2 O) n – , n ≤ 200, by Electronic Absorption Spectroscopy

Electronic absorption spectra of water cluster anions (H 2 O) n - , n ≤ 200, at T = 80 K are obtained by photodissociation spectroscopy and compared with simulations from literature and experimental data for bulk hydrated electrons. Two almost isoenergetic electron binding motifs are seen for cluster sizes 20 ≤ n ≤ 40, which are assigned to surface and partially embedded isomers. With increasing cluster size, the surface isomer becomes less populated, and for n ≥ 50, the partially embedded isomer prevails. The absorption shifts to the blue, reaching a plateau at n ≈ 100. In this size range, the absorption spectrum is similar to that of the bulk hydrated electron but is slightly red-shifted; spectral moment analysis indicates that these clusters are reasonable model systems for hydrated electrons near the liquid-vacuum interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray absorption spectroscopy of aluminum z-pinch plasma with tungsten backlighter planar wire array source

Absorption features from K-shell aluminum z-pinch plasmas have recently been studied on Zebra, the 1.7 MA pulse power generator at the Nevada Terawatt Facility. In particular, tungsten plasma has been used as a semi-backlighter source in the generation of aluminum K-shell absorption spectra by placing a single Al wire at or near the end of a single planar W array. All spectroscopic experimental results were recorded using a time-integrated, spatially resolved convex potassium hydrogen phthalate (KAP) crystal spectrometer. Other diagnostics used to study these plasmas included x-ray detectors, optical imaging, laser shadowgraphy, and time-gated and time-integrated x-ray pinhole imagers. Through comparisons with previous publications, Al K-shell absorption lines are shown to be from much lower electron temperature ({approx}10-40 eV) plasmas than emission spectra ({approx}350-500 eV).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In situ x-ray absorption investigations of a heterogenized molecular catalyst and its interaction with a carbon nanotube support

A highly active heterogenized molecular CO 2 reduction catalyst on a conductive carbon support is investigated to identify if its improved catalytic activity can be attributed to strong electronic interactions between catalyst and support. The molecular structure and electronic character of a [Re +1 (tBu-bpy)(CO) 3 Cl] (tBu-bpy = 4,4'-tert-butyl-2,2'-bipyridine) catalyst deposited on multiwalled carbon nanotubes are characterized using Re L 3 -edge x-ray absorption spectroscopy under electrochemical conditions and compared to the homogeneous catalyst. The Re oxidation state is characterized from the near-edge absorption region, while structural changes of the catalyst are assessed from the extended x-ray absorption fine structure under reducing conditions. Chloride ligand dissociation and a Re-centered reduction are both observed under applied reducing potential. The results confirm weak coupling of [Re(tBu-bpy)(CO) 3 Cl] with the support, since the supported catalyst exhibits the same oxidation changes as the homogeneous case. However, these results do not preclude strong interactions between a reduced catalyst intermediate and the support, preliminarily investigated here using quantum mechanical calculations. Thus, our results suggest that complicated linkage schemes and strong electronic interactions with the initial catalyst species are not required to improve the activity of heterogenized molecular catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural modeling of high-entropy oxides battery anodes using x-ray absorption spectroscopy

High-entropy oxides (HEOs) are single phase solid solutions where five or more metals share the same sublattice, giving rise to unexpected features in various fields of applications. Recently, HEOs have emerged as an alternative conversion electrode anode material for next-generation Li-ion batteries, where the combination of several different elements in a single solid solution can synergistically act to overcome some of its main drawbacks, improving performance. Due to their chemical complexity, x-ray absorption spectroscopy (XAS) emerges as an appropriate technique to study the electronic (x-ray absorption near edge structure, XANES) and local structure (extended x-ray absorption fine structure, EXAFS) of these compounds as a function of cycling. This work aims to highlight the capabilities of XAS as an element-specific probe to understand a material’s structure at the atomistic level through EXAFS modeling of (MgFeCoNiCuZn)O high-entropy system and how to extract valuable information about the bond distance, number of near neighbors, and local disorder, which are crucial to a full understanding of the electrochemical reaction mechanisms of such battery electrodes.

25 ENERGY STORAGE↗

Comparative X-Ray Absorption Analysis of the Spectrum of Vacant Electronic States in Cobalt and Nickel Tetraphenylporphyrin Complexes

The energy distributions and the properties of the lower vacant electronic states in cobalt and nickel tetraphenylporphyrin complexes CoTPP and NiTPP are studied by X-ray absorption spectroscopy. Quasimolecular analysis of the experimental absorption spectra measured in the region of the 2p and 1s ionization thresholds of complexing metal atoms, as well as the 1s thresholds of ligand atoms (nitrogen and carbon), is based on the comparison of the corresponding spectra with each other and with the spectra of the simplest nickel porphyrin NiP. It has been established that, despite a general similarity of the spectra of nitrogen and carbon in CoTPP and NiTPP, the fine structure of the 2p and 1s absorption spectra of cobalt and nickel atoms are radically different. The observed differences in the spectra of cobalt and nickel are associated with the features of the energy distribution of vacant 3d electron states. The presence in CoTPP of the partially filled valence 3db{sub 2g} molecular orbital (MO) results in the appearance in the cobalt spectra of a low-energy band, which is absent in the spectrum of nickel in NiTPP and leads to a doublet structure of transitions to b{sub 1g} and e{sub g} MOs due to the exchange interaction between 3d electrons in partially filled 3db{sub 2g} and 3db{sub 1g} or 3de{sub g} MOs. The spectrum of vacant states in CoTPP differs from that in NiTPP also due to the smaller energy distance between 3db{sub 1g} and e{sub g} MOs and the different positions of nonbonding MOs with the C2p character of the porphine ligand.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HIGH-RESOLUTION IR ABSORPTION SPECTROSCOPY OF POLYCYCLIC AROMATIC HYDROCARBONS IN THE 3 μ m REGION: ROLE OF PERIPHERY

In this work we report on high-resolution IR absorption studies that provide a detailed view on how the peripheral structure of irregular polycyclic aromatic hydrocarbons (PAHs) affects the shape and position of their 3 μ m absorption band. For this purpose, we present mass-selected, high-resolution absorption spectra of cold and isolated phenanthrene, pyrene, benz[a]antracene, chrysene, triphenylene, and perylene molecules in the 2950–3150 cm{sup −1} range. The experimental spectra are compared with standard harmonic calculations and anharmonic calculations using a modified version of the SPECTRO program that incorporates a Fermi resonance treatment utilizing intensity redistribution. We show that the 3 μ m region is dominated by the effects of anharmonicity, resulting in many more bands than would have been expected in a purely harmonic approximation. Importantly, we find that anharmonic spectra as calculated by SPECTRO are in good agreement with the experimental spectra. Together with previously reported high-resolution spectra of linear acenes, the present spectra provide us with an extensive data set of spectra of PAHs with a varying number of aromatic rings, with geometries that range from open to highly condensed structures, and featuring CH groups in all possible edge configurations. We discuss the astrophysical implications of the comparison of these spectra on the interpretation of the appearance of the aromatic infrared 3 μ m band, and on features such as the two-component emission character of this band and the 3 μ m emission plateau.

79 ASTRONOMY AND ASTROPHYSICS↗

A method for normalization of X-ray absorption spectra

Accurate normalization of X-ray absorption data is essential for quantitative analysis of near-edge features. A method, implemented as the program MBACK, to normalize X-ray absorption data to tabulated mass absorption coefficients is described. Comparison of conventional normalization methods with MBACK demonstrates that the new normalization method is not sensitive to the shape of the background function, thus allowing accurate comparison of data collected in transmission mode with data collected using fluorescence ion chambers or solid-state fluorescence detectors. The new method is shown to have better reliability and consistency and smaller errors than conventional normalization methods. The sensitivity of the new normalization method is illustrated by analysis of data collected during an equilibrium titration.

43 PARTICLE ACCELERATORS↗

High-Pressure Evolution of Fe2O3 Electronic Structure Revealed by X-ray Absorption

We report the first high pressure measurement of the Fe K-edge in hematite (Fe{sub 2}O{sub 3}) by X-ray absorption spectroscopy in partial fluorescence yield geometry. The pressure-induced evolution of the electronic structure as Fe{sub 2}O{sub 3} transforms from a high-spin insulator to a low-spin metal is reflected in the x-ray absorption pre-edge. The crystal field splitting energy was found to increase monotonically with pressure up to 48 GPa, above which a series of phase transitions occur. Atomic multiplet, cluster diagonalization, and density-functional calculations were performed to simulate the pre-edge absorption spectra, showing good qualitative agreement with the measurements. The mechanism for the pressure-induced phase transitions of Fe{sub 2}O{sub 3} is discussed and it is shown that ligand hybridization significantly reduces the critical high-spin/low-spin gap pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-pressure Evolution of Fe2O3 Electronic Structure Revealed by X-ray Absorption

We report the high-pressure measurement of the Fe K edge in hematite (Fe{sub 2}O{sub 3}) by x-ray absorption spectroscopy in partial fluorescence yield geometry. The pressure-induced evolution of the electronic structure as Fe{sub 2}O{sub 3} transforms from a high-spin insulator to a low-spin metal is reflected in the x-ray absorption pre-edge. The crystal-field splitting energy was found to increase monotonically with pressure up to 48 GPa, above which a series of phase transitions occur. Atomic multiplet, cluster diagonalization, and density-functional calculations were performed to simulate the pre-edge absorption spectra, showing good qualitative agreement with the measurements. The mechanism for the pressure-induced electronic phase transitions of Fe{sub 2}O{sub 3} is discussed and it is shown that ligand hybridization significantly reduces the critical high-spin/low-spin transition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absorptive Hydrogen Scavenging for Enhanced Aromatics Yield During Non–oxidative Methane Dehydroaromatization on Mo/H–ZSM–5 Catalysts

Addition of Zr metal particles to MoC x /ZSM–5 in interpellet mixtures (2:1 weight ratio) resulted in maximum single–pass methane conversion of 27 % for dehydroaromatization at 973 K (in significant excess of the equilibrium prescribed circa 10 % conversion at these conditions) and a concurrent 1.4–5.6–fold increase in aromatic product yields due to circumvention of thermodynamic equilibrium limitations by absorptive H 2 removal by Zr while retaining cumulative aromatic product selectivity. Here, the absorptive function of the polyfunctional catalyst formulation can be regenerated by thermal treatment in He flow at 973 K, yielding above–equilibrium methane conversion in successive regeneration cycles. H 2 uptake experiments demonstrate formation of bulk ZrH 1.75 on hydrogen absorption by Zr at 973 K. Cooperation between absorption and catalytic centers distinct in location and function enables circumvention of persistent thermodynamic challenges in non–oxidative methane dehydrogenation.

03 NATURAL GAS↗

High‐Energy‐Resolution X‐ray Absorption Spectroscopy for Identification of Reactive Surface Species on Supported Single‐Site Iridium Catalysts

Abstract We report high‐energy‐resolution X‐ray absorption spectroscopy detection of ethylene and CO ligands adsorbed on catalytically active iridium centers isolated on zeolite HY and on MgO supports. The data are supported by density functional theory and FEFF X‐ray absorption near‐edge modelling, together with infrared (IR) spectra. The results demonstrate that high‐energy‐resolution X‐ray absorption spectra near the iridium L III (2p 3/2 ) edge provide clearly ascribable, distinctive signatures of the ethylene and CO ligands and illustrate effects of supports and other ligands. This X‐ray absorption technique is markedly more sensitive than conventional IR spectroscopy for characterizing surface intermediates, and it is applicable to samples having low metal loadings and in reactive atmospheres and is expected to have an increasing role in catalysis research by facilitating the determination of mechanisms of solid‐catalyzed reactions through identification of reaction intermediates in working catalysts.

Hoffman, Adam S.↗