Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Solvothermal synthesis of graphene-Sb{sub 2}S{sub 3} composite and the degradation activity under visible light

Graphical abstract: Display Omitted Highlights: ► Graphene-Sb{sub 2}S{sub 3} composites were synthesized through a facile solvothermal method. ► Hydroxyl radicals are the main species responsible for the photodegradation activity. ► Graphene-Sb{sub 2}S{sub 3} demonstrated dramatically improved visible light degradation activity. -- Abstract: Novel graphene-Sb{sub 2}S{sub 3} (G-Sb{sub 2}S{sub 3}) composites were synthesized via a facile solvothermal method with graphene oxide (GO), SbCl{sub 3} and thiourea as the reactants. GO played an important role in controlling the size and the distribution of the formed Sb{sub 2}S{sub 3} nanoparticles on the graphene sheets with different density. Due to the negative surface charge, smaller Sb{sub 2}S{sub 3} particles size and efficient electrons transfer from Sb{sub 2}S{sub 3} to graphene, the composites demonstrated improved photodegradation activity on rhodamine B (RhB). Among these composites, the product G-Sb{sub 2}S{sub 3} 0.1, which was synthesized with the GO concentration of 0.1 mg/mL, exhibited the highest photodegradation activity owing to the considerable density of Sb{sub 2}S{sub 3} nanoparticles onto graphene sheet free of aggregation. Hydroxyl radicals (·OH) derived from conduction band (CB) electrons of Sb{sub 2}S{sub 3} is suggested to be responsible for the photodegradation of RhB. The high visible light degradation activity and the satisfactory cycling stability made the as-prepared G-Sb{sub 2}S{sub 3} 0.1 an applicable photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Data Sheets for A = 113

This evaluation for A = 113 updates one by J. Blachot, (2005Bl05), published in Nuclear Data Sheets 104, 791 (2005)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 121

The 2000 Nuclear Data Sheets for A = 121 by T. Tamura, with literature cutoff date of July 1,1999 has been updated. The experimental results from various decays and reactions for A=121 mass chain have been compiled and evaluated. The nuclides covered in this evaluation are from {sup 121}Rh to {sup 121}Pr. The data are summarized and presented, together with adopted level schemes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 125

The 1999 evaluation for A = 125 mass chain (1999Ka26) has been revised using experimental results from decays and reactions. Adopted values for the level and decay properties are tabulated. Inconsistencies and discrepancies are noted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 133

Evaluated nuclear structure and decay data for all nuclei within the A=133 mass chain are presented. The experimental data are evaluated and best values for level and gamma-ray energies, quantum numbers, lifetimes, gamma-ray intensities, and other nuclear properties are recommended. Inconsistencies and discrepancies that exist in the literature are noted. This work supersedes the earlier evaluation by S. Raab (1995Ra12), published in Nuclear Data Sheets75, 491 (1995).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 127

The 1996 evaluation for the A=127 mass chain (1996Ki01) has been revised. The experimental results from various decays and reactions for the A=127 mass chain have been compiled and evaluated. The nuclides covered in this evaluation are from {sup 127}Ag to {sup 127}Nd. The data are summarized and presented, together with adopted level schemes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pygmy Dipole Strength and Neutron Skins in Exotic Nuclei

Dipole strength distributions were determined for the neutron-rich nuclei {sup 129-132}Sn and {sup 133,134}Sb from electromagnetic excitation in an experiment using the FRS-LAND setup. For all nuclei, a sizeable fraction of ''pygmy'' dipole strength at excitation energies well below the giant dipole resonance was observed. The integrated low-lying dipole strength of the nuclei with low neutron separation energies can be compared to results for stable nuclei (e.g. N = 82 isotopes) determined for the energy regime of 5-9 MeV. A clear increase of the dipole strength with increasing asymmetry of the nuclei is observed. Comparing the ratio of the low-lying dipole over the giant dipole strength to recent relativistic mean field calculations, values for the parameters a{sub 4} and p{sub 0} of the symmetry energy and for the neutron skin thickness are derived. Averaged over {sup 130}Sn and {sup 132}Sn we extract a-bar{sub 4} = 31.8{+-}1.3 MeV and p-bar{sub 0} = 2.2{+-}0.5 MeV/fm{sup 3}. The neutron skin sizes are determined to R{sub n}-R{sub p} = 0.23{+-}0.03 fm and 0.24{+-}0.03 fm for {sup 130}Sn and {sup 132}Sn, respectively. For {sup 208}Pb a neutron skin thickness of R{sub n}-R{sub p} = 0.18{+-}0.035 fm follows, when applying the same method and using earlier published experimental findings on the dipole strength.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Realistic shell-model calculations and exotic nuclei around {sup 132}Sn

We report on a study of exotic nuclei around doubly magic {sup 132}Sn in terms of the shell model employing a realistic effective interaction derived from the CD-Bonn nucleon-nucleon potential. The short-range repulsion of the latter is renormalized by constructing a smooth low-momentum potential, V{sub low-k}, that is used directly as input for the calculation of the effective interaction. In this paper, we focus attention on proton-neutron multiplets in the odd-odd nuclei {sup 134}Sb, {sup 136}Sb. We show that the behavior of these multiplets is quite similar to that of the analogous multiplets in the counterpart nuclei in the {sup 208}Pb region, {sup 210}Bi and {sup 212}Bi.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Astrophysical S-factor for {alpha}-Capture of {sup 113}In in the p-Process Energy Range

The cross sections of {sup 113}In({alpha},{gamma}){sup 117}Sb and {sup 113}In({alpha},n){sup 116}Sb reactions have been measured using the activation method. The experiments were carried out at the ATOMKI cyclotron accelerator in the center of mass energy range from 8.7 to 13.7 MeV. Astrophysical S-factors have been calculated, and preliminary results are compared with statistical model predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the (p,{gamma}) Cross Sections of {sup 46}Ti, {sup 64}Zn, {sup 114}Sn and {sup 116}Sn at Astrophysically Relevant Energies

The total cross sections for the {sup 116}Sn(p,{gamma}){sup 117}Sb, {sup 114}Sn(p,{gamma}){sup 115}Sb, {sup 64}Zn(p,{gamma}){sup 65}Ga, and {sup 46}Ti(p,{gamma}){sup 47}V reactions have been measured using an activation technique for protons with center-of-mass energies between about 1 and 4 MeV. Radiative proton captures on {sup 116}Sn and {sup 64}Zn are compared to previous measurements while extending the measured energy range. From these measurements, astrophysical S-factors have been deduced by integrating NON-SMOKER results which have been scaled to the deduced S-factors in the measured energy range. Comparisons are made to thermonuclear reaction rates from the MOST and NON-SMOKER statistical model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phase change behavior in oxygen-incorporated Ge{sub 2}Sb{sub 2}Te{sub 5} films

Oxygen-incorporated Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) films were deposited using ion beam sputtering deposition. Sheet resistance in films with 16.7% oxygen content decreased at a higher annealing temperature than that of undoped GST films, while resistance in films with an oxygen content of over 21.7% decreased dramatically at lower temperatures. X-ray diffraction patterns showed crystallization to face-centered cubic phase was suppressed. However, phase separation to a hexagonal structure was observed in films with an oxygen content of over 21.7%. Extended x-ray absorption fine structure data of Ge K edge showed Ge was bonded to O as well as Te. Moreover, a stoichiometric GeO{sub 2} phase was not observed, while phase separation into Sb{sub 2}O{sub 3} and Sb{sub 2}Te{sub 3} occurred. The results indicate Ge-Te bonds with oxygen are related to structural stability.

36 MATERIALS SCIENCE↗

Coherent optical phonon spectroscopy studies of femtosecond-laser modified Sb{sub 2}Te{sub 3} films

We performed time-resolved reflectivity measurements to monitor changes in optical phonon modes in Sb{sub 2}Te{sub 3} thin films under femtosecond laser irradiation. We found that a phonon mode at 3.64 THz appears after high-fluence laser irradiation, in addition to the phonon modes of Sb{sub 2}Te{sub 3}. We determined that the additional mode is due to Te segregation as a result of laser-induced decomposition of the Sb{sub 2}Te{sub 3} film. This experiment clearly illustrates the irreversible effects of femtosecond laser irradiation during the measurement of coherent optical phonon dynamics in Sb{sub 2}Te{sub 3}.

36 MATERIALS SCIENCE↗

Characterizing the Effects of Etch-induced Material Modification on the Crystallization Properties of Nitron Doped Ge2Sb2Te5

The chemical and structural effects of processing on the crystallization of nitrogen doped Ge{sub 2}Sb{sub 2}Te{sub 5} is examined via x-ray photoelectron spectroscopy (XPS), x-ray absorption spectroscopy (XAS), time resolved laser reflectivity, and time resolved x-ray diffraction (XRD). Time resolved laser reflectivity and XRD show that exposure to various etch and ash chemistries significantly reduces the crystallization speed while the transition temperature from the rocksalt to the hexagonal phase is increased. XPS and XAS attribute this to the selective removal and oxidization of N, Ge, Sb, and Te, thus altering the local bonding environment to the detriment of device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ZnO homojunction photodiodes based on Sb-doped p-type nanowire array and n-type film for ultraviolet detection

ZnO p-n homojunctions based on Sb-doped p-type nanowire array and n-type film were grown by combining chemical vapor deposition (for nanowires) with molecular-beam epitaxy (for film). Indium tin oxide and Ti/Au were used as contacts to the ZnO nanowires and film, respectively. Characteristics of field-effect transistors using ZnO nanowires as channels indicate p-type conductivity of the nanowires. Electron beam induced current profiling confirmed the existence of ZnO p-n homojunction. Rectifying I-V characteristic showed a turn-on voltage of around 3 V. Very good response to ultraviolet light illumination was observed from photocurrent measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of MnSb inclusions formed in GaSb matrix directly during molecular beam epitaxial growth

Despite of intensive search for the proper semiconductor base materials for spintronic devices working at room temperature no appropriate material based on ferromagnetic semiconductors has been found so far. We demonstrate that the phase segregated system with MnSb hexagonal inclusions inside the GaSb matrix, formed directly during the molecular beam epitaxial growth reveals the ferromagnetic properties at room temperature and is a good candidate for exploitation in spintronics. Furthermore, the MnSb inclusions with only one crystalline structure were identified in this GaMn:MnSb granular material. The SQUID magnetometry confirmed that this material exhibits ferromagnetic like behavior starting from helium up to room temperature. Moreover, the magnetic anisotropy was found which was present also at room temperature, and it was proved that by choosing a proper substrate it is possible to control the direction of easy axis of inclusions' magnetization moment between in-plane and out-of-plane; the latter is important in view of potential applications in spintronic devices.

36 MATERIALS SCIENCE↗

Optical characteristics of pulsed laser deposited Ge-Sb-Te thin films studied by spectroscopic ellipsometry

Pulsed laser deposition technique was used for the fabrication of (GeTe){sub 1-x}(Sb{sub 2}Te{sub 3}){sub x} (x = 0, 0.33, 0.50, 0.66, and 1) amorphous thin films. Scanning electron microscopy with energy-dispersive x-ray analysis, x-ray diffraction, optical reflectivity, and sheet resistance temperature dependences as well as variable angle spectroscopic ellipsometry measurements were used to characterize as-deposited (amorphous) and annealed (rocksaltlike) layers. In order to extract optical functions of the films, the Cody-Lorentz model was applied for the analysis of ellipsometric data. Fitted sets of Cody-Lorentz model parameters are discussed in relation with chemical composition and the structure of the layers. The GeTe component content was found to be responsible for the huge optical functions and thickness changes upon amorphous-to-fcc phase transition.

36 MATERIALS SCIENCE↗

Band offsets between SiO{sub 2} and phase change materials in the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} pseudobinary system

The energy band alignment between stoichiometric phase change alloys residing along the pseudobinary line of GeTe-Sb{sub 2}Te{sub 3}[(GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x}] and SiO{sub 2} was obtained employing high-resolution x-ray photoelectron spectroscopy. The valence band offsets were determined using both the core-level spectra and valence band spectra in the analysis. The results obtained show that the band offsets vary with the composition of the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} alloy, exhibiting a parabolic dependence on the amount of GeTe in the alloy. Increasing the proportion of GeTe in the (GeTe){sub x}(Sb{sub 2}Te{sub 3}){sub 1-x} alloy was generally found to increase (decrease) the valence band (conduction band) offsets, while the binary alloys (GeTe, Sb{sub 2}Te{sub 3}) have similar band offset values. This information could be useful for phase change memory device design and optimization.

36 MATERIALS SCIENCE↗

Thermal conductivities and conduction mechanisms of Sb-Te Alloys at high temperatures

Sb-Te alloys have drawn much attention due to its application in phase change memory as well as the unique properties as chalcogenide. In this work, the thermal conductivities of Sb-x mol%Te alloys (x = 14, 25, 44, 60, 70, and 90) have been measured by the hot strip method from room temperature up to temperature just below the respective melting points. For the intermetallic compound Sb{sub 2}Te{sub 3} (x = 60), the thermal conductivity decreases up to approximately 600 K and then increases. For other Sb-x mol%Te alloys where x > 60, the thermal conductivities of the alloys decrease with increasing temperature. In contrast, for x < 60, the thermal conductivities of the alloys keep roughly constant up to approximately 600 K and then increase with increasing temperature. It is proposed that free electron dominates the heat transport below 600 K, and ambipolar diffusion also contributes to the increase in the thermal conductivity at higher temperatures. The prediction equation from temperature and chemical composition has been proposed for thermal conductivities of Sb-Te alloys.

36 MATERIALS SCIENCE↗