Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AEROSOLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

MODIS Aerosol and Low‐Cloud Retrievals: Orographic Effects in the Wake of Macquarie Island

Abstract Visible/infrared imagery from passive satellites is commonly relied upon to study low cloud microphysics over oceanic regions, including for the Southern Ocean (SO), but relatively little validation has been undertaken for the SO. In this article, we compare low‐cloud effective radius ( r e ), cloud droplet number concentration ( N d ) and cloud liquid water path (LWP) retrievals from the NASA Moderate Imaging Spectroradiometer (MODIS) with surface measurements collected during the Macquarie Island Cloud and Radiation Experiment (MICRE). MODIS 3.7‐μm band retrievals show little bias and moderately good correlation relative to MICRE retrievals for liquid‐phase low clouds when restricted to Solar Zenith Angles <65° on spatial scales of 50–100 km. However, the low overall bias in 3.7‐μm band effective radius ( r e 3.7 ) retrievals partly results from cancellation of errors: r e 3.7 is overestimated for non‐to‐lightly precipitating clouds, and underestimated for heavier drizzling clouds by ∼1–1.5 μm. 1.6‐μm and 2.1‐μm band r e retrievals are biased high. N d may likewise be slightly under‐ or overestimated depending on the concentration, but there is insufficient data to provide confidence in this result. Interestingly, a composite of MODIS retrievals from 2002 to 2020 show a distinct region of enhanced cloud cover and N d (and lower r e ) in the wake of Macquarie Island associated with orographic cloud formation. MODIS retrievals of aerosol optical depth (AOD) and Angstrom Exponent (AE) upwind and downwind of the island do not differ significantly. Comparison with MICRE measurements suggests that MODIS Collection 6 AOD retrievals are reasonable, while AE is problematically large.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- UHSAS Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured fluxes of size resolved particles with an ultrahigh sensitivity aerosol spectrometer (UHSAS) at the ARM facility’s North Slope Alaska site. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location and received snow during the project.

Aerosol concentration↗
DOE OSTI2023

Aerosol-Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review

An emergent direct-write approach, aerosol-jet printing (AJP), is gaining attention for the deployment of rapid and affordable microadditively manufactured energy-efficient sensors and printed electronics. AJP enables a broad range of ink viscosities (0.001–1 Pa s) for printing diverse materials ranging from ceramics and metals to polymers and biological matter. Reproducible, high-spatial-resolution features (≈10 µm), and wide standoff distances (1–11 mm) between the nozzle and the substrate facilitate conformal printing of complex geometrical designs on nonplanar—e.g., stepped or curved—surfaces. Here this paper aims to provide a comprehensive overview of state-of-the-art AJP-based sensors (e.g., strain and temperature gauges, biosensors, photosensors, humidity and surface acoustic wave sensors, dielectric elastomer actuators, and motion, smoke, and hazardous gas detectors) and to discuss prospective applications. The drive toward cost-effective devices that are smaller, lighter, and better-performing remains a frontier challenge in the field of printed electronics. Consequently, as AJP becomes increasingly utilized in the high-volume manufacturing of miniaturized active and passive sensors, it opens a pathway for facile large-scale fabrication of devices for a wide range of consumer and industrial applications, including transportation, agriculture, infrastructure, aerospace, national defense, and healthcare.

3-dimensional↗
DOE OSTI2024

Autonomous Output‐Oriented Aerosol Jet Printing Enabled by Hybrid Machine Learning

Additive manufacturing (AM) is rapidly revolutionizing modern manufacturing with recent progress in advanced printing methods and improved properties of printed materials. However, traditional AM methods are limited by their input‐oriented nature, which demands tedious trial‐and‐error tuning of printing parameters to achieve desired output properties. Here, in this work, an output‐oriented artificial intelligence‐integrated AM (AIAM) method is reported that enables an user to specify desired output properties while the printer autonomously discovers the optimal input printing parameters by integrating hybrid machine learning models and in situ measurements. Based on a predictive mapping between the input printing parameters and the output properties of interests established with <20 experiments designed by active learning, inverse design tasks are performed to intelligently generate the printing parameter settings that lead to desired outcomes using reinforcement learning. This method is demonstrated by autonomous aerosol jet printing (AJP) of conductive polymer films and achieving user‐defined electrical resistances with an ultralow error of 3.7%. The AIAM method, with its output‐oriented nature, holds the potential to significantly improve the autonomy, predictability, efficiency, and accessibility of the AM processes, which will unlock new possibilities in the autonomous and intelligent printing of a broad range of functional materials and devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tunable 3D Aerosol Jet Printing of Low‐Power Redox‐Gated Transistors with Multicomponent Inks

Printed hybrid electronics (PHE) offer a promising alternative for microelectronics fabrication, addressing some limitations of traditional subtractive manufacturing. Despite the versatility of PHE, particularly in the customization of printing inks, these devices have not yet matched the performance of silicon-based electronics due to challenges in gating mechanisms and operational stability. However, the potential of low-voltage redox-gating to achieve significant carrier modulations in correlated metal oxides remains unexplored in PHE. This study systematically investigates vanadium dioxide (VO 2 ) nanoparticles and redox inks, linking their organization in solution to their morphology, phase state, and properties in solid films and multilayered structures. Using an aerosol jet printer (AJP), a solid-state VO 2 transistor is fabricated, operating at just 0.4 V gating voltage. The printed VO 2 films demonstrate redox-modulated conductivity and consistent transistor behavior. The solid-state redox gating materials also provide long-term stability, with the device maintaining performance over 6000 cycles without degradation. These results highlight the potential of redox gating to enhance the application of functional nanoparticles in printed hybrid microelectronics, especially for flexible, low-voltage, and energy-efficient devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Mesoporous silica is a versatile material for energy, environmental, and medical applications. In this work, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 /g -1 . We show its superior performance in water purification, drug carrier, and thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell supported nanocatalysts by in situ decorating active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97% CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming MCM-41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to flexible catalysts design for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multizonal modeling of SARS-CoV-2 aerosol dispersion in a virtual office building

The dispersion of indoor airborne contaminants across different zones within a mechanically ventilated building is a complex phenomenon driven by multiple factors. In this study, we modeled the indoor dispersion of airborne SARS-CoV-2 aerosols within a US Department of Energy detailed medium office prototype building using CONTAM software. The aim of this study is to improve our understanding about how different parts of a building can experience varying concentrations of the airborne viruses under different circumstances of release and mitigation strategies. Results indicate that unventilated stairwells can have significantly higher concentrations of airborne viruses. The mitigation strategies of morning and evening flushing of conditioned zones were not found to be very effective. Instead, a constant high percentage of outdoor air in the supply mix, and the use of masks, portable HEPA air cleaners, MERV 13 or higher HVAC air filters, and ultraviolet germicidal irradiation disinfection were effective strategies to prevent airborne viral contamination in the majority of the simulated office building.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

The diurnally-averaged aerosol direct radiative effect and the use of the daytime-mean and insolation-weighted-mean solar zenith angles

Here, this study examines the application of the daytime-mean and insolation-weighted-mean solar zenith angles to calculate the diurnally-averaged aerosol direct radiative effect (DRE), DRE DA , for observed clear-sky conditions at the Atmospheric Radiation Measurement Program (ARM) Southern Great Plains (SGP) and Tropical Western Pacific (TWP) sites. As compared with the reference calculation, the DRE DA are too strong (i.e., more negative) using daytime-mean solar zenith angles (DTMSZA) and are too weak (i.e., less negative) using insolation-weighted-mean solar zenith angles (IWMSZA). The biases in the DRE DA for DTMSZA (IWMSZA) are about -0.8 (0.7) W m -2 at the TOA and about -1.5 (0.9) W m -2 at the surface. Noting the mean TOA DRE DA of -2.85 W m -2 and the surface DRE DA of -7.09 W m -2 at SGP, the relative biases for DTMSZA (IWMSZA) are 26% (-24%) for the TOA DRE DA , and 17% (-11%) for the surface DRE DA . At TWP, the mean TOA DRE DA is -2.81 W m -2 and the surface DRE DA is -11.84 W m -2 which corresponds to relative biases for DTMSZA (IWMSZA) of 29% (-27%) for the TOA DRE DA and 15% (-9%) for the surface DRE DA . By introducing an adjusted insolation-weighted-mean solar zenith angle, the mean biases in the DRE DA at the TOA becomes -0.09 W m -2 and the biases in the DRE DA at the surface are about -0.41 W m -2 . Also presented are the effects of using the mean solar zenith angles on the shortwave (SW) upward fluxes at the TOA and SW downward fluxes at the surface in both clear-sky and pristine-clear-sky (i.e., gases only) conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A general flame aerosol route to high-entropy nanoceramics

High-entropy ceramics are an emerging class of materials with fascinating characteristics. However, elemental immiscibility and crystal complexity limit the development of a general synthesis strategy, and common methods yield bulk materials. Here, we introduce a transformative non-equilibrium flame aerosol technique for synthesizing high-entropy nanoceramics. This scalable, one-step process enables the production of high-entropy oxide nanoceramics with an unprecedented diversity of crystal structures, including fluorite-phase materials that integrate up to 22 distinct cation elements. The method’s capacity for entropic stabilization and grain refinement significantly improves the thermal stability of these nanostructures. In a representative application, a Pt-(MgCoNiCuZn)O high-entropy single-atom catalyst showed superior activity and long-term stability, maintaining constant CO 2 conversion over 670 h and dramatically outperforming conventional catalysts. Finally, the general approach opens a vast composition and structure space for the creation of high-entropy oxide nanomaterials for application across diverse fields, including catalysis, energy storage, sensing, and thermal management.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of hydrogen isotope on plasma impedance and thermal pinching induced by single aerosol droplets injected into an inductively coupled plasma

The mass of the hydrogen isotope in micrometer-sized aqueous droplets introduced into an ICP has been found to affect the degree of resulting plasma perturbation. Studied plasma perturbations include local plasma cooling, plasma shrinkage due to thermal pinching, and changes in plasma impedance. The local cooling effect caused by a vaporizing aerosol droplet was found to be similar between H 2 O and D 2 O. This finding is likely a result of the similar heat capacities and vaporization rates of H 2 O and D 2 O droplets and of the comparable thermal conductivities and dissociation kinetics of H 2 O and D 2 O vapor. In contrast, a clear isotope effect was observed for plasma shrinkage and impedance change, with H 2 O causing a considerably stronger effect. Plasma shrinkage, gauged by the reduction in Ar emission at the edge of the plasma, was detected at all observation heights within the load-coil region, with D 2 O droplets causing as much as 30% less of an effect than H 2 O. Likewise, D 2 O droplets induce significantly less change in plasma impedance than H 2 O droplets. Depending on experimental conditions and the probing method, changes in plasma impedance caused by monodisperse D 2 O droplets were only 52%–80% that of H 2 O. The lower influence on plasma shrinkage and impedance change for D 2 O droplets is believed to be related to the much lower thermal conductivity of atomic deuterium, around 70% that of atomic hydrogen (protium). The time required for the plasma impedance to return to its original steady-state value was comparatively long (~10 ms) and similar for H 2 O and D 2 O droplets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Laser-driven ionization mechanisms of aluminum for single particle aerosol mass spectrometry

Single particle aerosol mass spectrometry (SPAMS), an analytical technique for measuring the size and composition of individual micron-scale particles, is capable of analyzing atmospheric pollutants and bioaerosols much more efficiently and with more detail than conventional methods which require the collection of particles onto filters for analysis in the laboratory. Despite SPAMS’ demonstrated capabilities, the primary mechanisms of ionization are not fully understood, which creates challenges in optimizing and interpreting SPAMS signals. In this paper, we present a well-stirred reactor model for the reactions involved with the laser-induced vaporization and ionization of an individual particle. The SPAMS conditions modeled in this paper include a 248 nm laser which is pulsed for 8 ns to vaporize and ionize each particle in vacuum. The ionization of 1 μm, spherical Al particles was studied by approximating them with a 0-dimensional plasma chemistry model. The primary mechanism of absorption of the 248 nm photons was pressure-broadened direct photoexcitation to Al(y 2 D). Atoms in this highly excited state then undergo superelastic collisions with electrons, heating the electrons and populating the lower energy excited states. We found that the primary ionization mechanism is electron impact ionization of various excited state Al atoms, especially Al(y 2 D). Because the gas expands rapidly into vacuum, its temperature decreases rapidly. The rate of three-body recombination (e - + e - + Al + → Al + e - ) increases at low temperature, and most of the electrons and ions produced recombine within several μs of the laser pulse. The importance of the direct photoexcitation indicates that the relative peak heights of different elements in SPAMS mass spectra may be sensitive to the available photoexcitation transitions. We also discuss the effects of laser intensity, particle diameter, and expansion dynamics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Implication of stratospheric aerosol geoengineering on compound precipitation and temperature extremes in Africa

Three Coupled Model Intercomparison Project 5 (CMIP5) models that simulated the G4 experiment of the Geoengineering Model Intercomparison Project (GeoMIP) were used to investigate the impact of stratospheric aerosol injection (SAI) on combined temperature and precipitation extremes in Africa that can have greater negative impacts on human and the environment than individual rainfall or temperature extremes. The examined compound extremes included the dry (R warm|dry and R cold|dry ) and wet (R warm|wet and R cold|wet ) modes assessed during the injection (SAI, 2050-2069) and post-injection (postSAI, 2070-2089) periods compared with the historical period (1986-2005). We found a significant projected change in the occurrence of both wet and dry modes during SAI and postSAI related to the historical period. The magnitude and sign of this change depend on the season and the geographical location. During the SAI and postSAI, the wet (R warm|wet and R cold|wet ) modes are projected to be significantly lower while the dry modes are noted to increase in a large part of African continent depending on the season and the geographical location and may consequently leads to an increase of the droughts prone areas. Furthermore, the termination effect is noted to re duce the occurrence of dry modes, which may reduce the potential negative effects of the injection after halting. As the effect may vary from one region to another and according to the season, it suggested assessing the key sector impacts of SAI. Thus, this change in dry modes due to SAI could affect all activities which depend on water resources such as water supply, agriculture and food production, energy demand, and production with adverse effects on health, security, and sustainable development, but this needs to be assessed and quantified at regional scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Investigation of pyruvic acid photolysis at the air-liquid interface as a source of aqueous secondary organic aerosols

Pyruvic acid (PA) is a ubiquitous 2-oxocarboxylic acid in the atmosphere. Its photochemical process at the air-liquid (a-l) interface has been suggested as an important source of aqueous secondary organic aerosols. Here, we investigated the photochemical reaction pathways of PA at the a-l interface using synchrotron-based vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) coupled with the System for Analysis at the Liquid Vacuum Interface (SALVI) microreactor. Results from mass spectral analysis and the determination of appearance energies (AEs) indicate that photolysis of PA can generate radicals, then they recombine with carboxylic acids and simple molecular oligomers. Furthermore, the preliminary products could form larger oligomers via radical reaction or esterification in the presence of hydroxyl and carboxyl functional groups. Mass spectral comparison shows that most photochemical reactions would complete within 4 h. The expanded photochemistry-driven reaction flowchart of PA is proposed based on the newly discovered products. Our results reveal that the interfacial PA photochemical reactions have different mechanisms from the bulk liquid due to the interfacial properties, such as molecular density, composition, and ion concentration. Our findings show that in situ mass spectral analysis with bright photon ionization is useful to elucidate the contribution of a-l interfacial reactions leading to aqSOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Surface Crust Formation Controls Evaporation Kinetics of Secondary Organic Aerosols

Gas-particle partitioning is critical for the evolution of secondary organic aerosols (SOA) in the atmosphere. SOA particles evaporate more slowly than expected at nearly size-independent rates, but the underlying mechanism remains controversial. Here, in this study, we apply kinetic multilayer modeling to simulate evaporation of α-pinene SOA, demonstrating that surface crust formation, emerging from accumulation of low-volatility compounds at the particle surface, leads to slow evaporation and reduced size dependence of the evaporation rate. While evaporation induced by decomposition of oligomers would naturally lead to size-independent evaporation rates, we observe and simulate nearly size-independent slow evaporation of polyethylene glycol mixture particles containing polymeric species that do not decompose, confirming the relevance of composition-dependent diffusivity for size-independent, slow evaporation. Slow evaporation of limonene SOA was also observed in environmental chamber experiments, and model simulations demonstrate strong surface crust formation with bulk diffusivity being depressed by up to 5 orders of magnitude compared to the inner bulk. We present experimental evidence using a surface-based mass spectrometry technique that shows that the particle surface becomes enriched in high molecular weight compounds upon evaporation of monomers. Our findings imply that viscous surface crusts may also limit the growth and chemical transformation of SOA particles, influencing their impacts on air quality and climate.

heterogeneous chemistry↗