Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACADEMIA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Controls-structures interaction guest investigator program: Overview and phase 1 experimental results and future plans

The NASA Controls-Structures Interaction (CSI) Guest Investigator program is described in terms of its support of the development of CSI technologies. The program is based on the introduction of CSI researchers from industry and academia to available test facilities for experimental validation of technologies and methods. Phase 1 experimental results are reviewed with attention given to their use of the Mini-MAST test facility and the facility for the Advance Control Evaluation of Structures. Experiments were conducted regarding the following topics: collocated/noncollocated controllers, nonlinear math modeling, controller design, passive/active suspension systems design, and system identification and fault isolation. The results demonstrate that significantly enhanced performance from the control techniques can be achieved by integrating knowledge of the structural dynamics under consideration into the approaches.

Smith-Taylor, Rudeen↗

The Fifth NASA/DOD Controls-Structures Interaction Technology Conference, part 2

This publication is a compilation of the papers presented at the Fifth NASA/DoD Controls-Structures Interaction (CSI) Technology Conference held in Lake Tahoe, Nevada, March 3-5, 1992. The conference, which was jointly sponsored by the NASA Office of Aeronautics and Space Technology and the Department of Defense, was organized by the NASA Langley Research Center. The purpose of this conference was to report to industry, academia, and government agencies on the current status of controls-structures interaction technology. The agenda covered ground testing, integrated design, analysis, flight experiments and concepts.

Newsom, Jerry R.↗

College education

Space Grant Colleges and Universities must build the space curriculum of the future on the firm basis of deep knowledge of an involvement with the present operating programs of the nation and an on-going and extensive program of leading edge research in the aerospace sciences and engineering, management, law, finance, and the other arts that are integral to our planetary society. The Space Grant College and Fellowship Program must create new academic fields of enquiry, which is a long and difficult process that will require deeper and broader interaction between NASA and academia than has previously existed.

Criswell, David R.↗

Outreach and public service

The Alabama Space Grant Consortium plan for outreach and public service is presented as a model for study and discussion. It is consistent with the objectives of the Space Grant Program and expresses a strong commitment to cooperation between academia, industry, and government.

Wilson, Harold J.↗

1991 NASA Life Support Systems Analysis workshop

The 1991 Life Support Systems Analysis Workshop was sponsored by NASA Headquarters' Office of Aeronautics and Space Technology (OAST) to foster communication among NASA, industrial, and academic specialists, and to integrate their inputs and disseminate information to them. The overall objective of systems analysis within the Life Support Technology Program of OAST is to identify, guide the development of, and verify designs which will increase the performance of the life support systems on component, subsystem, and system levels for future human space missions. The specific goals of this workshop were to report on the status of systems analysis capabilities, to integrate the chemical processing industry technologies, and to integrate recommendations for future technology developments related to systems analysis for life support systems. The workshop included technical presentations, discussions, and interactive planning, with time allocated for discussion of both technology status and time-phased technology development recommendations. Key personnel from NASA, industry, and academia delivered inputs and presentations on the status and priorities of current and future systems analysis methods and requirements.

Evanich, Peggy L.↗

1992 NASA Life Support Systems Analysis workshop

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

Evanich, Peggy L.↗

National Media Laboratory media testing results

The government faces a crisis in data storage, analysis, archive, and communication. The sheer quantity of data being poured into the government systems on a daily basis is overwhelming systems ability to capture, analyze, disseminate, and store critical information. Future systems requirements are even more formidable: with single government platforms having data rate of over 1 Gbit/sec, greater than Terabyte/day storage requirements, and with expected data archive lifetimes of over 10 years. The charter of the National Media Laboratory (NML) is to focus the resources of industry, government, and academia on government needs in the evaluation, development, and field support of advanced recording systems.

Mularie, William↗

A research experiment on facilitation and formation of joint research and development programs between government, industry, and universities: Overview, preliminary findings, and observations

Presented is an overview of an experiment to explore the free-market approach to public-private collaboration through the development and implementation of a joint venture mechanism to enable formation of R&D projects between government, industry and academia. Some preliminary results related to time-to-commercialization and economic competitiveness are discussed.

Shariq, Syed Z.↗

The Controls-Structures Interaction Guest Investigator Program - An overview and phase I experimental results

The NASA Controls-Structures Interaction (CSI) Guest Investigator program is described in terms of its support of the development of CSI technologies. The program is based on the introduction of CSI researchers from industry and academia to available test facilities for experimental validation of technologies and methods. Phase I experimental results are reviewed with attention given to their use of the Mini-MAST test facility and the facility for the Advance Control Evaluation of Structures. Experiments were conducted regarding: collocated/noncollocated controllers, nonlinear math modeling, controller design, passive/active suspension systems design, and system identification and fault isolation. The results demonstrate that significantly enhanced performance from the control techniques can be achieved by integrating knowledge of the structural dynamics under consideration into the approaches.

Smith-Taylor, Rudeen↗

RICIS Symposium 1988

Integrated Environments for Large, Complex Systems is the theme for the RICIS symposium of 1988. Distinguished professionals from industry, government, and academia have been invited to participate and present their views and experiences regarding research, education, and future directions related to this topic. Within RICIS, more than half of the research being conducted is in the area of Computer Systems and Software Engineering. The focus of this research is on the software development life-cycle for large, complex, distributed systems. Within the education and training component of RICIS, the primary emphasis has been to provide education and training for software professionals.

Source record↗

Computer systems and software engineering

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

Mckay, Charles W.↗

Computational mechanics needs study

In order to assess the needs in computational mechanics over the next decade, we formulated a questionnaire and contacted computational mechanics researchers and users in industry, government, and academia. As expected, we found a wide variety of computational mechanics usage and research. This report outlines the activity discussed with those contacts, as well as that in our own organizations. It should be noted that most of the contacts were made before the recent decline of the defense industry. Therefore, areas which are strongly defense-oriented may decrease in relative importance. In order to facilitate updating of this study, names of a few key researchers in each area are included as starting points for future literature surveys. These lists of names are not intended to represent those persons doing the best research in that area, nor are they intended to be comprehensive. They are, as previously stated, offered as starting points for future literature searches. Overall, there is currently a broad activity in computational mechanics in this country, with the breadth and depth increasing as more sophisticated software and faster computers become more available. The needs and desires of the workers in this field are as diverse as their background and organizational products. There seems to be some degree of software development in any organization (although the level of activity is highly variable from one organization to another) which has any research component in its mission. It seems, however, that there is considerable use of commercial software in almost all organizations. In most industrial research organizations, it appears that very little actual software development is contracted out, but that most is done in-house, using a mixture of funding sources. Government agencies vary widely in the ratio of in-house to out-house ratio. There is a considerable amount of experimental verification in most, but not all, organizations. Generally, the amount of experimental verification is more than we expected. Of all the survey contacts, one or two believe that the resources they are allocated are sufficient, but most do not. Some believe they have only half the resources they need. Some see their resource deficits as short-term, while others see it as a trend which will continue or perhaps worsen. The pessimism is stronger in the defense and aerospace industry. When considering only the nonlinear development efforts, there appears to be an even mix of geometric and material nonlinearity. There is not much particular emphasis in linear analysis unless it is in extension of current analysis capabilities to larger problems. The primary exception is concern about modeling of composites, where proven methodologies have trailed element and computer hardware development. Most of the people we spoke to use finite element techniques, but there is some finite difference and boundary element work ongoing. There is also some interest in multiple methods. Coupling of finite elements and boundary elements appears to be of high interest, since the two analysis types are complementary.

Griffin, O. Hayden, Jr.↗

Feasibility study of an orbiting laboratory for testing CSI technology

A concept for an orbiting laboratory for testing Controls-Structures Integration (CSI) technology is described. The CSI-Star concept reflects a lower cost, higher risk approach. The concept supports demonstration and validation testing for critical CSI technologies at a cost of $20M to $26M with a 1-year reliability of approximately 0.9. The Ball Aerospace QuickStar bus is the carrier for the CSI test article. QuickStar is launched as a secondary payload on the McDonnell Douglas Delta 2. The QuickStar/Delta 2 approach is flight proven. The CSI test article is a 20 foot, 1 Hz, truss beam which is deployed from the QuickStar bus. The test article is well instrumented for quality system identification. The laboratory provides three layers of active control consisting of global vibration suppression along the truss beam, vibration isolation between the beam and instrument platforms, and vibration compensation through the use of gimbaled platforms which point lasers relative to optical sensor targets. The configuration simulates the dynamics of multi-instrument science platforms such as those of the Earth Observation System (EOS) while maintaining strong ties to astrophysics missions such as the Optical Interferometer. Uplink/downlink services and a reprogrammable computer provide flexibility for long-term investigations by members of the CSI community (NASA, DoD, academia, and industry). CSI-Star fills the gap between short-term experiments, which have been conducted primarily on the Shuttle, and future science missions which require the technology. The on-orbit maturity of CSI technology must be established to obtain acceptance by project managers and to promote injection of the technology into future science missions.

Bicos, Andrew S.↗

The Eighth Annual NASA/Contractors Conference and 1991 National Symposium on Quality and Productivity: Extending the boundaries of total quality management

The Eighth Annual NASA/Contractors Conference and 1991 National Symposium on Quality and Productivity provided a forum to exchange knowledge and experiences in these areas of continuous improvement. The more than 1,100 attendees from government, industry, academia, community groups, and the international arena had a chance to learn about methods, tools, and strategies for excellence and to discuss continuous improvement strategies, successes, and failures. This event, linked via satellite to concurrent conferences hosted by the NASA Goddard Space Flight Center in Greenbelt, Maryland, and Martin Marietta Astronautics Group in Denver, Colorado, also explored extending the boundaries of Total Quality Management to include partnerships for quality within communities and encouraged examination, evaluation, and change to incorporate the principles of continuous improvement.

Templeton, Geoffrey B.↗

Industrial Hygiene Laboratory accreditation: The JSC experience

The American Industrial Hygiene Association (AIHA) is a society of professionals dedicated to the health and safety of workers and community. With more than 10,000 members, the AIHA is the largest international association serving occupational and environmental health professionals practicing industrial hygiene in private industry, academia, government, labor, and independent organizations. In 1973, AIHA developed a National Industrial Hygiene Laboratory Accreditation Program. The purposes of this program are shown.

Fadner, Dawn E.↗

Technology in action

In keeping with the NASA Administrator's announcement that technology transfer will become a fundamental mission of NASA, the Marshall Space Flight Center (MSFC) has initiated new programs to reach the heartland of U.S. industry. The Center has continued to expand its already well-established outreach program aimed at helping American business, industry, and academia at the grassroots level. The goal is to ensure that America regains and maintains its proper place of leadership among the world's technologically developed nations. MSFC's national goal is to enhance America's competitiveness in the world marketplace, fortify the value of the dollar, and ensure technological breakthroughs by American laboratories benefit taxpayers and industries. The Technology Utilization (TU) Office at MSFC believes a number of measures are possible to slow, then halt, and ultimately reverse the erosion of American technological leadership. MSFC's TU Office is reaching out to American industry on an increasingly broadening scope, facilitating the transfer of NASA derived technologies to American businesses, industries, educational institutions, and individuals. There are many valid approaches to achieving this goal. Some, such as the National Technology Initiative, begin at the top and work down through America's top corporate structure. Others, such as the technology transfer program that MSFC has implemented, begin at the one-on-one, grassroots level -- working with small and medium-sized firms that form the bulk of American industry. What can be done by one NASA center is, admittedly, limited. But by extrapolating this one-on-one approach to the more than 700 Federal laboratories, a great deal can be accomplished. This report contains an examination of outreach and in reach programs, problem statements programs, applications projects, new technology reporting, new technology administration, and the need for increased resources to further facilitate technology transfer.

Source record↗

ISOBUS: A new versatile spacecraft platform using Shuttle small payloads

The new NASA credo of 'faster, better, cheaper' calls for a new generation of smaller and less complex spacecraft. In response to this challenge, many new spacecraft concepts have been generated within NASA, industry, and academia. The JPL, Rockwell International Space Systems Division, and The Space Dynamics Laboratory (SDL)/Utah State University (USU) are jointly examining one such new spacecraft concept, hereafter termed ISOBUS, which is derived from recent research and development work in isogrid structures based on a six-sided hexagon shaped structure. Two prototypical products from SDL/USU's work are ISOSPACEPACK and ISOSAT. These hexagon shaped elements serve as building blocks for the ISOBUS spacecraft concept. Various aspects of the ISOBUS concept are discussed.

Tamir, David↗

Computational Methods for Crashworthiness

Presentations and discussions from the joint UVA/NASA Workshop on Computational Methods for Crashworthiness held at Langley Research Center on 2-3 Sep. 1992 are included. The presentations addressed activities in the area of impact dynamics. Workshop attendees represented NASA, the Army and Air Force, the Lawrence Livermore and Sandia National Laboratories, the aircraft and automotive industries, and academia. The workshop objectives were to assess the state-of-technology in the numerical simulation of crash and to provide guidelines for future research.

Noor, Ahmed K.↗