Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “7”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Ab initio investigation of the Li 7 ( p , e + e - ) Be 8 process and the X17 boson

Observations of anomalies in the electron-positron angular correlations in high-energy decays in 4 He, 8 Be, and 12 C have been reported recently by the ATOMKI collaboration. These could be explained by the creation and subsequent decay of a new boson with a mass of ≈ 17MeV. Theoretical understanding of pair creation in the proton capture reactions used in these experiments is important for the interpretation of the anomalies. We apply the ab initio no-core shell model with continuum (NCSMC) to the proton capture on 7 Li. The NCSMC describes both bound and unbound states in light nuclei in a unified way with chiral two- and three-nucleon interactions as the only input. We investigate the structure of 8 Be, the p+ 7 Li elastic scattering, the 7 Li(p,y)⁢ 8 Be cross section, and the internal pair creation 7 Li ⁢(p,e + ⁢e - ) 8 Be. Here we discuss the impact of a proper treatment of the initial scattering state on the electron-positron angular correlation spectrum and compare our results to available ATOMKI data sets. Finally, we calculate 7 Li ⁢(p,X)⁢ 8 Be cross sections for several proposed models of the hypothetical X17 particle.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Higgs boson search sensitivity in the H{yields}WW dilepton decay mode at {radical}(s)=7 and 10 TeV

Prospects for discovery of the standard model Higgs boson are examined at center-of-mass energies of 7 and 10 TeV at the CERN Large Hadron Collider. We perform a simulation of the signal and principal backgrounds for Higgs boson production and decay in the W{sup +}W{sup -} dilepton mode, finding good agreement with the ATLAS and CMS collaboration estimates of signal significance at 14 TeV for Higgs boson masses near m{sub H}=160 GeV. At the lower energy of 7 TeV, using the same analysis cuts as these collaborations, we compute expected signal sensitivities of about 2 standard deviations ({sigma}'s) at m{sub H}=160 GeV in the ATLAS case, and about 3.6{sigma} in the CMS case for 1 fb{sup -1} of integrated luminosity. Integrated luminosities of 8 fb{sup -1} and 3 fb{sup -1} are needed in the ATLAS case at 7 and 10 TeV, respectively, for 5{sigma} level discovery. In the CMS case, the numbers are 2 fb{sup -1} and 1 fb{sup -1} at 7 and 10 TeV. Our different stated expectations for the two experiments arise from the more restrictive analysis cuts in the CMS case and from the different event samples in the two cases. Recast as exclusion limits, our results show that with 1 fb{sup -1} of integrated luminosity at 7 TeV, the LHC may be able to exclude m{sub H} values in the range 160 to 180 GeV provided no signal is seen.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SPL 7 and SPL 8 represent a novel flowering regulation mechanism in switchgrass

Summary The aging pathway in flowering regulation is controlled mainly by micro RNA 156 (miR156). Studies in Arabidopsis thaliana reveal that nine miR156‐targeted SQUAMOSA PROMOTER BINDING ‐ LIKE ( SPL ) genes are involved in the control of flowering. However, the roles of SPL s in flowering remain elusive in grasses. Inflorescence development in switchgrass was characterized using scanning electron microscopy ( SEM ). Microarray, quantitative reverse transcription polymerase chain reaction (q RT ‐ PCR ), chromatin immunoprecipitation (Ch IP )‐ PCR and EMSA were used to identify regulators of phase transition and flowering. Gene function was characterized by downregulation and overexpression of the target genes. Overexpression of SPL 7 and SPL 8 promotes flowering, whereas downregulation of individual genes moderately delays flowering. Simultaneous downregulation of SPL 7 / SPL 8 results in extremely delayed or nonflowering plants. Furthermore, downregulation of both genes leads to a vegetative‐to‐reproductive reversion in the inflorescence, a phenomenon that has not been reported in any other grasses. Detailed analyses demonstrate that SPL 7 and SPL 8 induce phase transition and flowering in grasses by directly upregulating SEPALLATA3 ( SEP 3 ) and MADS 32 . Thus, the SPL 7 / 8 pathway represents a novel regulatory mechanism in grasses that is largely different from that in Arabidopsis . Additionally, genetic modification of SPL 7 and SPL8 results in much taller plants with significantly increased biomass yield and sugar release.

Gou, Jiqing↗

Ceramics Based on Powder Mixtures Containing Calcium Hydrogen Phosphates and Sodium Salts (Na{sub 2}CO{sub 3}, Na{sub 4}P{sub 2}O{sub 7}, and NaPO{sub 3})

Ceramic materials in the Na{sub 2}O–CaO–P{sub 2}O{sub 5} system have been produced using powder mixtures containing calcium hydrogen phosphates (monetite/brushite: CaHPO{sub 4}/CaHPO{sub 4} ∙ 2H{sub 2}O) and sodium salts (Na{sub 2}CO{sub 3} ∙ H{sub 2}O, Na{sub 4}P{sub 2}O{sub 7} ∙ 10H,O, and NaPO{sub 3}). These salts were used as precursors to the following high-temperature phases: Сa{sub 2}P{sub 2}O{sub 7}, Na{sub 2}O, Na{sub 4}P{sub 2}O{sub 7}, and NaPO{sub 3}. The amount of the salts in the powder mixtures was such that the oxide composition of the ceramics corresponded to 10 mol % sodium oxide for each mixture in the Na{sub 2}O–CaO–P{sub 2}O{sub 5} system. The powder mixtures were prepared using mechanical activation in acetone, which was accompanied by monetite rehydration to brushite. X-ray diffraction characterization showed that, after firing, the phase composition of the ceramics produced from the powder mixtures thus prepared lay in the Сa{sub 2}P{sub 2}O{sub 7}–NaCaPO{sub 4}–Na{sub 2}СaP{sub 2}O{sub 7}–Са(РО{sub 3}){sub 2} phase field. The resultant ceramic materials contain biocompatible and bioresorbable phases and can be recommended for bone implant fabrication.

36 MATERIALS SCIENCE↗

Two-particle Bose–Einstein correlations in pp collisions at √s=0.9 and 7 TeV measured with the ATLAS detector

The paper presents studies of Bose–Einstein Correlations (BEC) for pairs of like-sign charged particles measured in the kinematic range pT> 100 MeV and |η|< 2.5 in proton collisions at centre-of-mass energies of 0.9 and 7 TeV with the ATLAS detector at the CERN Large Hadron Collider. The integrated luminosities are approximately 7 μb -1 , 190 μb -1 and 12.4 nb -1 for 0.9 TeV, 7 TeV minimum-bias and 7 TeV high-multiplicity data samples, respectively. The multiplicity dependence of the BEC parameters characterizing the correlation strength and the correlation source size are investigated for charged-particle multiplicities of up to 240. A saturation effect in the multiplicity dependence of the correlation source size parameter is observed using the high-multiplicity 7 TeV data sample. In conclusion, the dependence of the BEC parameters on the average transverse momentum of the particle pair is also investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rotation-Enabled 7-Degree of Freedom Seismometer for Geothermal Resource Development. Phase 1 Final Report

Under this Department of Energy (DOE) grant, A-Tech Corporation d.b.a. Applied Technology Associates (ATA), seeks to develop a seven-degree-of-freedom (7-DOF) seismic measurement tool for high-temperature geothermal applications. The Rotational-Enabled 7-DOF Seismometer includes a conventional tri-axial accelerometer, a conventional pressure sensor or hydrophone, and a tri-axial rotational sensor. The rotational sensing capability is novel, based upon ATA's innovative research in rotational sensing technologies. The geothermal industry requires tools for high-precision seismic monitoring of crack formation associated with Enhanced Geothermal System (EGS) stimulation activity. Currently, microseismic monitoring is conducted by deploying many seismic tools at different depth levels along a 'string' within drilled observation wells. Costs per string can be hundreds of thousands of dollars. Processing data from the spatial arrays of linear seismometers allows back-projection of seismic wave states. In contrast, a Rotational-Enabled 7-DOF Seismometer would simultaneously measure p-wave velocity, s-wave velocity, and incident seismic wave direction all from a single point measurement. In addition, the Rotational-Enabled 7-DOF Seismometer will, by its nature, separate p- and s-waves into different data streams, simplifying signal processing and facilitating analysis of seismic source signatures and geological characterization. By adding measurements of three additional degrees-of-freedom at each level and leveraging the information from this new seismic observable, it is likely that an equally accurate picture of subsurface seismic activity could be garnered with fewer levels per hole. The key cost savings would come from better siting of the well due to increased information content and a decrease in the number of confirmation wells drilled, also due to the increase in information per well. Improved seismic tools may also increase knowledge, understanding, and confidence, thus removing some current blocks to feasibility and significantly increasing access to potential geothermal sites. During the Phase 1 effort summarized in this final report, the ATA Team modeled and built two TRL 3 proof-of-concept test units for two competing rotational sensor technologies. The two competing technologies were based on ATA's angular rate and angular displacement measurement technologies; Angular rate: ATA's Magnetohydrodynamic Angular Rate Sensor (Seismic MHD); and Angular displacement: ATA's Low Frequency Improved Torsional Seismometer (LFITS). In order to down-select between these two technologies and formulate a go / no go decision, the ATA Team analyzed and traded scientific performance requirements and market constraints against sensor characteristics and components, acquiring field data where possible to validate the approach and publishing results from these studies of rotational technology capability. Based on the results of Phase 1, the ATA Team finds that the Seismic MHD (SMHD) technology is the best choice for enabling rotational seismometry and significant technical potential exists for micro-seismic monitoring using a downhole 7-DOF device based on the SMHD. Recent technical papers and field data confirm the potential of rotational sensing for seismic mapping, increasing confidence that cost-reduction benefits are achievable for EGS. However, the market for geothermal rotational sensing is small and undeveloped. As a result, this report recommends modifying the Phase 2 plan to focus on prototype development aimed at partnering with early adopters within the geothermal industry and the scientific research community. The highest public benefit will come from development and deployment of a science-grade SMHD rotational seismometer engineered for geothermal downhole conditions and an integrated test tool for downhole measurements at active geothermal test sites.

15 GEOTHERMAL ENERGY↗

Nanosecond Breakdown Characteristics of C 4 F 7 N and Various Mixtures at Pressures Above 1 Atmosphere in Comparison with SF 6

This report evaluates the pulsed breakdown performance of C 4 F 7 N under a 6.8 kV/ns voltage excitation. The pulsed dielectric strength of C 4 F 7 N is compared to SF 6 in the same experimental setup, and it is found that C 4 F 7 N concentrations of 50% or greater are required to achieve a dielectric strength greater than or equal to SF 6 . Pure C 4 F 7 N demonstrated higher electric field hold-off for longer time periods and less statistical variance under pulsed conditions when compared to SF 6 . Mixtures of 50%C 4 F 7 N with N 2 or CO 2 as buffer gases showed no appreciable difference in pulsed dielectric strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EVOLUTION OF STELLAR-TO-HALO MASS RATIO AT z = 0–7 IDENTIFIED BY CLUSTERING ANALYSIS WITH THE HUBBLE LEGACY IMAGING AND EARLY SUBARU/HYPER SUPRIME-CAM SURVEY DATA

We present clustering analysis results from 10,381 Lyman break galaxies (LBGs) at z ∼ 4–7, identified in the Hubble legacy deep imaging and new complimentary large-area Subaru/Hyper Suprime-Cam data. We measure the angular correlation functions of these LBGs at z ∼ 4, 5, 6, and 7 and fit these measurements using halo occupation distribution (HOD) models that provide an estimate of halo masses, M{sub h}∼(1−20)×10{sup 11} M{sub ⊙}. Our M{sub h} estimates agree with those obtained by previous clustering studies in a UV-magnitude versus M{sub h} plane and allow us to calculate stellar-to-halo mass ratios (SHMRs) of LBGs. By comparison with the z∼0 SHMR, we identify evolution of the SHMR from z∼0 to z∼4 and from z∼4 to z∼7 at the >98% confidence levels. The SHMR decreases by a factor of ∼2 from z∼0 to 4 and increases by a factor of ∼4 from z∼4 to 7 at the dark matter halo mass of M{sub h}∼10{sup 11} M{sub ⊙}. We compare our SHMRs with results of a hydrodynamic simulation and a semianalytic model and find that these theoretical studies do not predict the SHMR increase from z∼4 to 7. We obtain the baryon conversion efficiency (BCE) of LBGs at z∼4 and find that the BCE increases with increasing dark matter halo mass. Finally, we compare our clustering+HOD estimates with results from abundance matching techniques and conclude that the M{sub h} estimates of the clustering+HOD analyses agree with those of the simple abundance matching within a factor of 3, and that the agreement improves when using more sophisticated abundance matching techniques that include subhalos, incompleteness, and/or evolution in the star formation and stellar mass functions.

79 ASTRONOMY AND ASTROPHYSICS↗

Shake-up and shake-off spectra in the electron capture decay of atomic $^7$Be

The most stringent laboratory-based experimental limits on the existence of sub-MeV sterile neutrinos are currently set by decay spectroscopy of radioactive $^7$Be embedded into superconducting sensors. The systematic uncertainties are dominated by the modeling of the electron shake-up and shake-off spectra that are not based on state-of-the-art atomic theory and do not include electron correlations or relativistic effects. We have used the multiconfiguration Dirac-Fock formalism to obtain correlated wavefunctions ab initio and compute all single and double shake processes in the electron capture decay of atomic $^7$Be. The simulations can explain some but not all of the observed spectral features, likely because the wave functions are modified by the Ta sensor material that the $^7$Be is embedded into. The new models also show that the L/K electron capture ratio of $^7$Be in Ta has previously been slightly underestimated revising the previous value of 0.070(7) to a new value of 0.0756(20).

Atomic Physics (physics.atom-ph)↗

Stability of Fe 2 S and Fe 12 S 7 to 125 GPa; implications for S-rich planetary cores

The Fe-FeS phase relations were explored in the 22–25 wt. % S compositional range using single crystal X-ray diffraction in a laser heated diamond anvil cell. At pressures up to 125 GPa and at high temperatures, Fe 2 S and Fe 12 S 7 were determined to co-crystallise. The novel Fe 12 S 7 compound adopts the Co 12 P 7 structure and Fe 2 S assumes the Fe 2 P-type structure. Applying these results to an Fe-FeS binary phase diagram exposes a complex series of FeS phase assemblages in the 16–25 wt. % S range, whereby minor changes in S content significantly affect the crystallisation sequence of Fe-S rich planetary cores. For core compositions S-rich of the Fe 2 S-Fe 12 S 7 eutectic, the small density difference between solid Fe 12 S 7 and Fe 2 S is likely to result in the formation of a core slush rather than a gravitationally stable inner core. Crystallisation of denser Fe 2 S at eutectic conditions could then result in gravitational settling of an Fe 2 S-rich inner core over time. As the Fe 2 P-type Fe 2 S has previously been identified forming at high temperatures to pressures as low as 22 GPa, the core crystallisation regimes determined here also elucidate that the Martian core sulfur composition must lie on the S-rich side of the Fe-Fe 3 S eutectic or even the S-rich side of the Fe 3 S-Fe 2 S eutectic to maintain a fully molten core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improvement in the geopotential derived from satellite and surface data (GEM 7 and 8)

A refinement was obtained in the earth's gravitational field using satellite and surface data. In addition to a more complete treatment of data previously employed on 27 satellites, the new satellite solution (Goddard Earth Model 7) includes 64,000 laser measurements taken on 7 satellites during the international satellite geodesy experiment (ISAGEX) program. The GEM 7, containing 400 harmonic terms, is complete through degree and order 16. The companion solution GEM 8 combines the same satellite data as in GEM 7 with surface gravimetry over 39% of the earth. The GEM 8 is complete to degree and order 25. Extensive tests on data independent of the solution show that the undulation of the geoidal surface computed by GEM 7 has an accuracy of about 3m (rms). The overall accuracy of the geoid estimated by GEM 8 is estimated to be about 4-1/4m (rms), an improvement of almost 1m over previous solutions.

Wagner, C. A.↗

Improvement in the geopotential derived from satellite and surface data /Gem 7 and 8/

A refinement has been obtained in the earth's gravitational field by using satellite and surface data. In addition to a more complete treatment of data previously employed on 27 satellites, the new satellite solution Gem 7 (Goddard Earth Model 7) includes 64,000 laser measurements taken on seven satellites. Gem 7, containing 400 harmonic terms, is complete through degree and order 16. The companion solution Gem 8 combines the same satellite data as Gem 7 with surface gravimetry over 39% of the earth. Gem 8 is complete to degree and order 25. Extensive tests on data independent of the solution show that the undulations of the geoidal surface computed by Gem 7 have an accuracy of about 2.5 m (rms). The overall accuracy of the geoid calculated by Gem 8 is estimated to be about 4 m (rms). The new combination solution is the first to show signs of 'convection rolls' in the upper mantle below the Pacific Ocean.

Wagner, C. A.↗

The bow shock structure of IRS 7 - Wind-wind collision near the Galactic center

New structural details of ionized gas associated with IRS 7, a mass-losing supergiant near the Galactic center, are reported, and radio continuum and theoretical maps are compared. High-resolution multiconfiguration VLA observations of IRS 7 reveal ionized gas with a bow shock structure at a wavelength of 2 cm. The apex of the bow shock is facing more toward the cluster of blue stellar objects, known as IRS 16, than Sgr A*, the compact nonthermal source near the Galaxy's dynamical center. It is inferred that the shape of the mass-losing envelope of IRS 7 is influenced by Galactic winds from IRS 16. It is concluded from a comparison of the morphology of the ionized envelope of IRS 7 with simple theoretical modeling of the bow shock structure that the shape of the shock results from the collision between the Galactic center and stellar winds rather than from the motion of IRS 7 through the interstellar medium.

Yusef-Zadeh, Farhad↗

Reaction of YBa2Cu3O(7-beta) with Gold, Silver, Bismuth and Lead: Substitution Chemistry and Composite Fabrication

The reaction of YBa2Cu3O(7-beta) with Au, Ag, Bi, and Ph ions or metal is described. Three types of materials were produced: a well-defined series of homogeneous superconductors was obtained for Au ion substitution with little effect on T(sub c); attempted Ag and Bi ion substitution resulted in multi-phase samples with slightly enhanced T(sub c); finally, attempts to produce superconducting metal/superconducting ceramic composites with Pb and Bi powders resulted in multi-phase samples with drastically diminished superconducting properties. For Au- substituted superconductors, YBa2(Cu(l-x)Au(x))3O(7-beta), a substitution series (x = 0 - 0.1) has been synthesized. For x = 0.1 there was no change in the a and b lattice parameters (a = 3.826 A and b = 3.889 A) but a 0.06 A c axis expansion to 11.75 A was observed. The valence of Cu and Au in YBa2Au(0.3)Cu(2.7)O(7-beta) was investigated using X-ray Absorption Near-Edge Structure (XANES). X-ray studies indicate that Au goes into the Cu(l) site and Cu K edge XANES shows that this has little effect on the oxidation state of the remaining copper. A small effect on T(sub c) is observed (T(sub c) = 89 K for x = 0.10). Ag and Bi addition results in a rise in T(sub c) and a decrease in (delta)T(sub c) at low levels (x = 0.10 Ag, T(sub c) = 94 K and (delta)T(sub c) = 0.5 K; x = 0.02 Bi, T(sub c) = 94 K and (delta)T(sub c) = 1K) relative to typical values for YBa2Cu3O(7-beta) (T(sub c) = 91 K, (delta)T(sub c) = 2 K). Attempts at fabrication of Pb- and Pb(1-x)Bi(x)-superconductor composites are described. Cold pressing followed by low temperature (200 C) sintering resulted in a composite which excluded flux below 90 K but did not show zero electrical resistance until the metal (alloy) superconducting transition. X-ray diffraction showed the presence of pervoskite and metal. Processing at moderate (450 C) or high (950 C) temperatures resulted in oxygen-depleted pervoskite and/or metal oxides. These materials displayed greatly degraded superconducting properties. Processing at 800 C resulted in high T(sub c) only for composites containing greater than 90% weight fraction ceramic. Reaction of metal with YBa2Cu3O(7-beta) formed superconducting lead/bismuth-based oxides and other binary oxides.

Hepp, Aloysius F.↗

On-Orbit ACDS Performance of the Landsat 7 Spacecraft

Landsat 7 is part of NASA's Earth Science Enterprise (ESE). The ESE is committed to developing an understanding of the total Earth system, the effects of natural and human-induced changes on the global environment, and how natural processes affect humans and how humans affect them. The Landsat 7 satellite consists of the spacecraft bus which was provided under a NASA contract with Lockheed Martin Missiles and Space in Philadelphia, PA, and the Enhanced Thematic Mapper-Plus (ETM+) instrument, procured under a NASA contract with Raytheon Santa Barbara Remote Sensing, in Santa Barbara, CA. The Landsat 7 Attitude Control and Determination System (ACDS) provides many essential functions for the operation of the spacecraft bus and for ETM+. The ACDS maintains the required attitude and orbit at the degree of accuracy necessary for power generation, command and telemetry, thermal balance, image acquisition, Gimbaled X-Band Antenna (GXA) pointing and data for image post-processing. Descriptions of the Landsat 7 mission and the ACDS modes and requirements are presented. A brief summary of significant events of the on-orbit initialization and validation period are provided. Finally, the Landsat 7 product generation system is described and the impact that the ACDS performance has on the ground based image processing system is explored.

Sabelhaus, Phillip↗

Contractor Support Building #7 Per- and Polyfluoroalkyl Substances (PFAS) Site Assessment Work Plan

This Work Plan documents the proposed field sampling activities for a per- and polyfluoroalkyl substances (PFAS) Site Assessment at the Contractor Support Building (CSB) #7 at Kennedy Space Center (KSC). The Work Plan provides a background of the historical activities that occurred at CSB #7, and the limited environmental investigations performed at CSB #7. The proposed Site Assessment activities at CSB #7 include the advancement of a soil lithologic boring to 60 feet below ground surface, the installation of a staff gauge in site surface water, perform direct push groundwater sampling at eight locations, and collect four surface water samples. Sampling details, depths, and locations are presented in the Work Plan. The Work Plan was presented to the KSC Remediation Team in the form of an Advance Data Package in February 2023. Following STRIVES approval, the CSB #7 PFAS Site Assessment Work Plan will be formally submitted to the Florida Department of Environmental Protection.

Howard Franklin Fowler↗

Time-Resolved Research at the Advanced Photon Source Beamline 7-ID

The Sector 7 undulator beamline (7-ID) of the Advanced Photon Source (APS) is dedicated to time-resolved x-ray research and is capable of ultrafast measurements on the order of 100 ps. Beamline 7-ID has a laser laboratory featuring a Ti:Sapphire system (average power of 2.5W, pulse duration <50 fs, repetition rate 1-5 kHz) that can be synchronized to the bunch pattern of the storage ring. The laser is deliverable to x-ray enclosures, which contain diffractometers, as well as motorized optical tables for table-top experiments. Beamline 7-ID has a single APS Undulator A and uses a diamond (111) double-crystal monochromator, providing good energy resolution over a range of 6-24 keV. Available optics include Kirkpatrick-Baez (KB) mirrors to microfocus the x-ray beam. A variety of time-resolved diffraction and spectroscopy research is available at 7-ID, with experiments being done in the atomic, molecular, optical, chemistry, and solid state (bulk and surface) fields.

43 PARTICLE ACCELERATORS↗

Testing of a 7-tube palladium membrane reactor for potential use in TEP

A Palladium Membrane Reactor (PMR) consists of a palladium/silver membrane permeator filled with catalyst (catalyst may be inside or outside the membrane tubes). The PMR is designed to recover tritium from the methane, water, and other impurities present in fusion reactor effluent. A key feature of a PMR is that the total hydrogen isotope content of a stream is significantly reduced as (1) methane-steam reforming and/or water-gas shift reactions proceed on the catalyst bed and (2) hydrogen isotopes are removed via permeation through the membrane. With a PMR design matched to processing requirements, nearly complete hydrogen isotope removals can be achieved. A 3-tube PMR study was recently completed. From the results presented in this study, it was possible to conclude that a PMR is appropriate for TEP, perforated metal tube protectors function well, platinum on aluminum (PtA) catalyst performs the best, conditioning with air is probably required to properly condition the Pd/Ag tubes, and that CO/CO{sub 2} ratios maybe an indicator of coking. The 3-tube PMR had a permeator membrane area of 0.0247 m{sup 2} and a catalyst volume to membrane area ratio of 4.63 cc/cm{sup 2} (with the catalyst on the outside of the membrane tubes and the catalyst only covering the membrane tube length). A PMR for TEP will require a larger membrane area (perhaps 0.35 m{sup 2}). With this in mind, an intermediate sized PMR was constructed. This PMR has 7 permeator tubes and a total membrane area of 0.0851 m{sup 2}. The catalyst volume to membrane area ratio for the 7-tube PMR was 5.18 cc/cm{sup 2}. The total membrane area of the 7-tube PMR (0.0851 m{sup 2}) is 3.45 times larger than total membrane area of the 3-tube PMR (0.0247 m{sup 2}). The following objectives were identified for the 7-tube PMR tests: (1) Refine test measurements, especially humidity and flow; (2) Refine maintenance procedures for Pd/Ag tube conditioning; (3) Evaluate baseline PMR operating conditions; (4) Determine PMR scaling method; (5) Evaluate PMR with realistic feed compositions; (6) Evaluate PMR performance with varying permeate pressures; (7) Study coking-related issues; and (8) Identify any unexpected behavior that may require further investigation (used to study transient behavior). This report presents the tests results defined by these objectives.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗