Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2018 data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Inclusive Search for Anomalous Single-Photon Production in MicroBooNE

The MicroBooNE experiment is an 85-ton active volume liquid argon time projection chamber (LArTPC) neutrino detector situated in the Fermilab Booster Neutrino Beam. One of the main goals for MicroBooNE is to investigate the “low energy excess” (LEE) of electromagnetic events observed by the MiniBooNE experiment by leveraging the unique capabilities of the LArTPC technology to distinguish photons from electron electromagnetic showers. In this poster, we present an inclusive search for anomalous production of single-photon events from neutrino interactions in the MicroBooNE experiment, motivated by the MiniBooNE LEE. The analysis uses the Wire-Cell reconstruction framework to select a sample of inclusive single-photon final-state interactions and leverages simultaneous measurements of sidebands to constrain signal and background predictions and reduce uncertainties. We perform a blind analysis using a dataset collected from February 2016 to July 2018 from the Booster Neutrino Beam (BNB) at Fermilab. In the full signal region, we observe agreement between the data and the prediction, with a goodness-of-fit p-value of 0.11. We then isolate a sub-sample of these events containing no visible protons, and observe 93 $/pm$ 22(stat.) $\pm$ 35(syst.) data events above prediction, corresponding to just above 2$\sigma$ local significance, concentrated at shower energies below 600 MeV.

Yandel, Erin [Los Alamos] (ORCID:0000000277123709)↗
DOE OSTI2021

A blessing in disguise : Characterisations of ProtoDUNE photon showers for neutrino measurements in DUNE

There are few areas of particle physics as open to new discoveries as the neutrino sector. Although these particles are among the most abundant in the universe, their weak coupling to ordinary matter makes them a challenge to study. The Deep Underground Neutrino Experiment (DUNE) is an upcoming precision experiment in neutrino physics planned to be built between Illinois and South Dakota in the US. The most powerful neutrino beam in the world will be aimed at the largest liquid argon time projection chamber in the world through 1300 km of solid rock. In order to prototype this detector, a scale model was constructed and operated at CERN in 2018 called ProtoDUNE. This thesis presents three studies performed on this detector. The first concerns the readout of detector data by the FELIX data acquisition system, as well as compression studies performed on the same data. The second study concerns the identification of photons created in neutral pion decay, which form a major background to neutrino-produced electrons. The distinction between electrons and photons is based on the differing energy deposition in the initial part of the particle showers they produce. The third study concerns the energy reconstruction of particle showers in the detector. Although photon showers created from neutral pion decay are a major background to the eventual neutrino signal, they have a known energy profile and can thus be used to calibrate the energy reconstruction of particle showers in general, a vital requirement for DUNE’s physics goals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Conceptual Neutronics Scoping for Ramp Testing in the Advanced Test Reactor

With the closer of the Halden Boiling Water Reactor in 2018, the global capacity for in-reactor power ramp testing has been lost. As such tests provide valuable data for understanding pellet-cladding interaction (PCI) phenomena, finding new facilities for ramp testing is of interest to the United States Accident-Tolerant Fuel (ATF) Program. Several options at Idaho National Laboratory (INL) are being evaluated for adding ramp test capabilities. In the Transient Reactor Test Facility (TREAT), one option is testing inside a Transient Water Irradiation System in TREAT (TWIST) capsule. In the Advanced Test Reactor (ATR), one option under consideration is testing in an I-Loop toward the outer edge of the core. Another is testing in Loop-2A, located in the Center Flux Trap (CFT) of the ATR. In this paper, we examine the conceptual scoping for the Loop-2A experiment known as ATF-2Ramp.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Conceptual Neutronics Scoping for Ramp Testing in the Advanced Test Reactor

With the closure of the Halden Boiling Water Reactor in 2018, the global capacity for in-reactor power ramp testing has been lost. As such tests provide valuable data for understanding pellet-cladding interaction (PCI) phenomena, finding new facilities for ramp testing is of interest to the United States Accident-Tolerant Fuel (ATF) Program. Several options at Idaho National Laboratory (INL) are being evaluated for adding ramp test capabilities. In the Transient Reactor Test Facility (TREAT), one option is testing inside a Transient Water Irradiation System in TREAT (TWIST) capsule. In the Advanced Test Reactor (ATR), one option under consideration is testing in an I-Loop toward the outer edge of the core. Another is testing in Loop-2A, located in the Center Flux Trap (CFT) of the ATR. In this paper, we examine the conceptual scoping for the Loop-2A experiment known as ATF-2Ramp.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

AI-Enhanced Co-Design for Next-Generation Microelectronics: Innovating Innovation (Workshop Report)

The Artificial Intelligence Enhanced Co-Design for Next Generation Microelectronics virtual workshop was held April 4-5, 2023, and attended by subject matter experts from universities, industry, and national laboratories. This was the third in a series of workshops to motivate the research community to identify and address major challenges facing microelectronics research and production. The 2023 workshop focused on a set of topics from materials to computing algorithms, and included discussions on relevant federal legislation and such as the Creating Helpful Incentives to Produce Semiconductors and Science Act (CHIPS Act) which was signed into law in the summer of 2022. Talks at the workshop included edge computing in radiation environments, new materials for neuromorphic computing, advanced packaging for microelectronics, and new AI techniques. We also received project updates from several of the Department of Energy (DOE) microelectronics co-design projects funded in the fall of 2021, and from three of the Energy Frontier Research Centers (EFRCs) that had been funded in the fall of 2022. The workshop also conducted a set of breakout discussions around the five principal research directions (PRDs) from the 2018 Department of Energy workshop report: 1) define innovative material, device, and architecture requirements driven by applications, algorithms, and software; 2) revolutionize memory and data storage; 3) re-imagine information flow unconstrained by interconnects; 4) redefine computing by leveraging unexploited physical phenomena; 5) reinvent the electricity grid through new materials, devices, and architectures. We tasked each breakout group to consider one primary PRD (and other PRDs as relevant topics arose during discussions) and to address questions such as whether the research community has embraced co-design as a methodology and whether new developments at any level of innovation from materials to programming models requires the research community to reevaluate the PRDs developed back in 2018.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

East River Pore Water FTICR-MS Data associated with "Geomorphic and Hydrogeochemical Controls on Fine-Scale Hyporheic Microbiome Assembly and Function"

Pore water samples were collected from distributed locations around Meander A in East River (Crested Butte, CO, USA) during the summer of 2018. This dataset consists of the characterization of dissolved organic matter using 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS; in .xml format) analyzed through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory).This study aimed to understand organic matter assemblages differ within a streambed with differing geomorphology and the interplay between streambed organic matter and microbiome function. Any published work that utilizes data presented in this dataset should cite the dataset using the DOI number. If using the dataset, please acknowledge the U.S. Department of Energy (DOE) Office of Science (BER) Subsurface Biogeochemical Research (SBR) program, the Environmental Molecular Sciences Laboratory (EMSL), and Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems (WHONDRS). The publication DOI will be added to this abstract when available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of “Tight Oil” Well Performance and Completion Practices in the Powder River Basin - “Time Slice” Analysis

The objective of this paper is to assess how well completion practices and well performance have evolved over time (“time slices”) in the tight sands and shales of the Powder River Basin (PRB). This information can provide a foundation for helping operators define more effective well completion practices and thus optimize well performance in an emerging “tight oil” basin. To start, the authors assembled a “database” containing well completion practices, production data, and geologic information for more than 800 horizontal (Hz) wells targeting three “tight oil” formations -- Turner, Frontier, and Mowry--placed on production in the past dozen years. To control for the impact of geologic and reservoir properties on well performance, the authors defined 12 geologically distinct areas (“partitions”) for the Turner, Frontier, and Mowry Shale in the Powder River Basin (4 partitions in each formation). This paper discusses the methodology for establishing “time slices” for each partition within each of the three “tight oil” formations, including (1) taking out, to the extent practical, the effects of geology by partitioning the three “tight oil” formations based on their geologic parameters; (2) using type curves and estimated ultimate recoveries (EURs) to establish a reliable measure of well performance; and (3) rigorously inspecting the production and well completion data to assure a quality dataset. Partition #2, a high thermal maturity area of the Frontier Sandstone in the western Powder River Basin, helps illustrate the results of the study. Using a dataset of 55 Hz wells, the study found that well performance has steadily improved, with oil EURs increasing from 180 MBbl in 2012-13 to 290 MBbl in 2018-19. Much of this improvement was due to the use of longer Hz laterals, increasing notably from 3,765 ft in 2012-13 to 10,260 ft in 2018-19. More intensive completion practices contributed, as well. For example, the number of frac stages more than doubled, from 17 to 35, and proppant concentrations increased from 1,060 lbs/ft to 1,320 lbs/ft. Finally, the data show diminishing returns to longer laterals and more intensive completion practices. For example, the key performance measure of oil EUR per 1,000 ft of lateral is decreasing. For 2012-13, Hz wells recovered 50 MBbl of oil per 1,000 ft of lateral while the more recent 2018-19 Hz wells only provide 30 MBbl of oil per 1,000 ft of lateral. Considerable insight can be gained by using “time slices” and geologic partitioning to better understand the relationship between changes in well drilling and completion practices and changes in well performance in emerging “tight oil” plays. The results from this study can also serve as a foundation for subsequent, more intense efforts involving data analytics for defining more optimum well completion practices targeting specified geologic settings and formations.

02 PETROLEUM↗
DOE OSTI2022

Photosynthesis phenology, as defined by solar-induced chlorophyll fluorescence, is overestimated by vegetation indices in the extratropical Northern Hemisphere

Vegetation phenology is highly sensitive to climate change, although the data and methods used to estimate key phenological states can influence this sensitivity. Because of its direct relation to leaf photosynthetic carbon uptake, remotely sensed solar-induced chlorophyll fluorescence (SIF) can provide new insight assessing changes in vegetation phenology. In this work, we investigated the potential of using a SIF time series product named contiguous SIF (CSIF) to estimate spring, summer, and autumn phenology in the extratropical Northern Hemisphere (>30°N) and compared the results with those based on Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) for the period 2001–2018. Overall, we found similar spatial patterns in phenological states. However, specific dates of key phenological events differed when using CSIF vs. MODIS NDVI data. NDVI data indicated that the growing season started earlier (by 10.1 days on average) and ended later (11.5 days on average) relative to CSIF data. This implies that actual periods for photosynthetic activity are shorter (by 21.6 days on average) than those estimated from vegetation indices more directly related to changes in canopy structure. These large differences between results from NDVI and that from CSIF suggest that vegetation indices such as NDVI seem to overestimate the period for active photosynthesis over the extratropical Northern Hemisphere. Furthermore, while phenology of the early growing season is dominated by temperature for both NDVI and CSIF data, phenology of the late growing season is mainly controlled by temperature for NDVI but by precipitation for CSIF. Our findings were further confirmed by other SIF (GOME-2 SIF) and vegetation index (MODIS EVI) datasets. Phenology modes in Earth system modelling are often parameterized using leaf unfolding and senescence from either station or satellite observations. Our results imply that canopy structure-based parameterization schemes may have overestimated photosynthesis active period, and thus productivity responses. We conclude that SIF data offers a novel and unique approach for assessing phenological change - one that is more directly tied to the carbon cycle and how it is being influenced by climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Search for long-lived particles decaying in the CMS muon detectors in proton-proton collisions at s = 13 TeV

A search for long-lived particles (LLPs) decaying in the CMS muon detectors is presented. A data sample of proton-proton collisions at s = 13 TeV corresponding to an integrated luminosity of 138 fb − 1 , recorded at the LHC in 2016–2018, is used. The decays of LLPs are reconstructed as high multiplicity clusters of hits in the muon detectors. In the context of twin Higgs models, the search is sensitive to LLP masses from 0.4 to 55 GeV and a broad range of LLP decay modes, including decays to hadrons, τ leptons, electrons, or photons. No excess of events above the standard model background is observed. The most stringent limits to date from LHC data are set on the branching fraction of the Higgs boson decay to a pair of LLPs with masses below 10 GeV. This search also provides the best limits for various intervals of LLP proper decay length and mass. Finally, this search sets the first limits at the LHC on a dark quantum chromodynamic sector whose particles couple to the Higgs boson through gluon, Higgs boson, photon, vector, and dark-photon portals, and is sensitive to branching fractions of the Higgs boson to dark quarks as low as 2 × 10 − 3 . © 2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Community Resilience Indicator Analysis: Commonly Used Indicators from Peer-Reviewed Research (Updated for Research Published 2003-2021)

In 2017, FEMA’s National Integration Center (NIC) Technical Assistance (TA) Branch identified a need to establish a data-driven basis for prioritizing locations for TA investment and guiding local emergency management planning. To achieve this goal, FEMA tasked Argonne National Laboratory (Argonne) with identifying commonly used indicators of community resilience across the landscape of published peer-reviewed research. FEMA and Argonne completed the first Community Resilience Indicator Analysis (CRIA) in 2018 and repeated the process in 2022. The CRIA process begins with a literature review and cataloguing of published peer-reviewed assessment methodologies on social vulnerability and community resilience. The literature review findings are then filtered by inclusion criteria established by the CRIA research team to ensure the methodologies are: (1) Quantitative, (2) Data and methodology are publicly available, (3) Calculated at the county level or lower, (4) Examine generalized hazard risk (rather than a singular hazard), and (5) Focused on pre-disaster community conditions. After this, the research team identifies the commonly used indicators across these methodologies and selects the best data source for each indicator. Finally, the research team bins the data for visual display, conducts a correlation analysis and creates a composite index, the FEMA Community Resilience Index (FEMA CRI). In 2018, the CRIA identified eight resilience and vulnerability assessment methodologies and 20 commonly used indicators (indicators used in three or more of the eight methodologies). The FEMA CRI in 2018 was created from these 20 indicators and was produced for at the county level. The 2022 CRIA updated the literature review to expand the list of methodologies examined and followed the same process, resulting in an analysis of 14 methodologies published between 2003 and 2021 and 22 indicators identified as commonly used (indicators used in five or more of the 14 methodologies). In 2022, the research team produced the FEMA CRI at the county and the census tract levels. To make the CRIA data more accessible and more actionable, each individual indicator and the FEMA CRI is binned and included in FEMA’s Resilience Analysis and Planning Tool (RAPT). RAPT enables emergency managers and community partners to quickly visualize relative differences in potential resilience by county, tribe and census tract. By reviewing the data for each of these 22 indicators individually, emergency managers can gain insights for targeted outreach strategies, planning, mitigation investments and response and recovery operations. Communities, regional governments and others can use this data to better understand potential challenges to resilience. As the social science field of examining and validating indicators of resilience evolves, FEMA will update RAPT to provide emergency managers and community partners with additional data and tools to inform planning, mitigation, response and recovery. It is important to understand that the role of the emergency manager is not to change or to “improve” the data, but to plan appropriately for the community characteristics reflected in the data. These datasets are community characteristics that researchers have identified as important considerations for resilience. For example, people with disabilities may have greater challenges to be resilient to disasters. If a community has a high population of people with disabilities, the emergency manager(s) may need to create tailored preparedness outreach programs and strategies to ensure those residents have support if evacuation is necessary. Rather than label these indicators as an absolute measure of resilience, FEMA considers “potential challenges to resilience” a better frame to understand these indicators. Everyone is vulnerable to disasters. While scholars theorize that certain characteristics may make an individual or a household more socially vulnerable, the data does not reflect measures that individuals and/or communities have taken to address potential challenges, such as emergency management planning and outreach or household preparedness measures. To aid emergency managers in understanding how to use these indicators, calling them potential challenges to resilience supports a more positive and strategic application of the data in all phases of emergency management.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Recommendations for Data-in-Transit Requirements for Securing DER Communications

With the adoption of Distributed Energy Resource (DER) interoperability standards, common communication protocols are now being deployed between power system operators and DER devices. In 2018, a revision to the US interconnection and interoperability standard, Institute of Electrical and Electronics Engineers (IEEE) Std. 1547, required DER equipment to have an IEEE 2030.5, IEEE 1815, or SunSpec Modbus communication exchange interface. This change supports the future transition to secure connection and exchange of information between the DER equipment and implementing parties, such as grid operators. Adoption of standardized communication protocols and associated information models is a critical step toward interoperability between power system operators and DER, such as photovoltaic (PV) and energy storage systems. However, security requirements for these standardized communication protocols are not comprehensive, resulting in non-standard and vendor-specific implementation that may leave DER equipment susceptible to cyberattacks. This paper examines the data-in-flight security requirements for standardized DER communication protocols, per IEEE 1547-2018 revision, as it relates to device authentication, key management, and encryption. The state of the art for these security features is also explored, addressing their impact on communication and performance of low-cost single board computers, which are typical of DER devices. In conclusion, a recommendation is provided to adopt a common set of communication requirements, which are intended to achieve interoperability and implement data security over DER network pathways, while ensuring reliable, secure, and real-time information delivery.

42 ENGINEERING↗
DOE OSTI2023

Measurement of the Higgs boson mass in the H → ZZ*→ 4ℓ decay channel using 139 fb –1 of s = 13 TeV pp collisions recorded by the ATLAS detector at the LHC

The mass of the Higgs boson is measured in the H→ZZ * →4ℓ decay channel. The analysis uses proton–proton collision data from the Large Hadron Collider at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector between 2015 and 2018, corresponding to an integrated luminosity of 139 fb –1 . The measured value of the Higgs boson mass is 124.99 ± 0.18(stat.) ± 0.04(syst.) GeV. In final states with muons, this measurement benefits from an improved momentum-scale calibration relative to that adopted in previous publications. The measurement also employs an analytic model that takes into account the invariant-mass resolution of the four-lepton system on a per-event basis and the output of a deep neural network discriminating signal from background events. This measurement is combined with the corresponding measurement using 7 and 8 TeV pp collision data, resulting in a Higgs boson mass of 124.94 ± 0.17(stat.) ± 0.03(syst.) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Microbial community data from throughfall exclusion experiment: Metadata, SI, community composition, LefSe, and FunGuilR data tables from PARCHED Panama tropical forest soils, 2024-2025

Soil contains more carbon (C) than terrestrial vegetation and the atmosphere combined, with some of the largest terrestrial C stocks in tropical rainforests. Soil microbes decompose organic matter, playing a vital role in the storage or loss of soil C. With climate change, drought conditions are predicted to increase in many tropical regions, including both chronic drying and extended drought, potentially influencing these processes. This project explored the effects of chronic and seasonal drying on soil microbial communities across four distinct tropical forests in a long-term drying experiment. We investigated the effects of a chronic drying manipulation on soil microbial community abundance and variation across different forests and seasons. We also compared findings with previously published data from these forests after short-term drying. This project used soils from a long-term drying experiment established in 2018 across four seasonal lowland forests in Panama. Soils were collected from 0 – 10 cm depths during three seasonal periods in control and drying plots in 2024 and 2025 from a total of 32 plots (n = 4 per forest per treatment). The forests varied in baseline rainfall and soil fertility. We calculated alpha and beta diversity indices and compared taxonomic community composition. We found significant biogeographic variation in microbial diversity and taxonomy, with significant differences across the forests and significant effects of the drying treatment. Metadata and sample IDs are within Metadata_16S.csv and Metadata_ITS.csv. Relative abundance tables of every sample at every season are shown in the Excel workbooks 16S Relative Abundance.xlsx and ITS Relative Abundance.xlsx. They are then also shown in CSV files by each taxonomic level. Linear discriminant analysis effect size (LefSe) tables are shown for the full 16S and ITS datasets (n = 96), subsets for every site at every season (n = 8), and then for the forests with each plot merged by season (n = 8). FunGuildR data table of ITS data is uploaded.

Bacteria↗
DOE OSTI2025

Search for resonant pair production of Higgs bosons in the $\textrm{b}\overline{\textrm{b}}\textrm{b}\overline{\textrm{b}}$ final state using large-area jets in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A search is presented for the resonant production of a pair of standard model-like Higgs bosons using data from proton-proton collisions at a centre-of-mass energy of 13 TeV, collected by the CMS experiment at the CERN LHC in 2016–2018, corresponding to an integrated luminosity of 138 fb −1 . The final state consists of two b quark-antiquark pairs. The search is conducted in the region of phase space where at least one of the pairs is highly Lorentz-boosted and is reconstructed as a single large-area jet. The other pair may be either similarly merged or resolved, the latter reconstructed using two b-tagged jets. The data are found to be consistent with standard model processes and are interpreted as 95% confidence level upper limits on the product of the cross sections and the branching fractions of the spin-0 radion and the spin-2 bulk graviton that arise in warped extradimensional models. The limits set are in the range 9.74–0.29 fb and 4.94–0.19 fb for a narrow radion and a graviton, respectively, with masses between 1 and 3 TeV. For a radion and for a bulk graviton with widths 10% of their masses, the limits are in the range 12.5–0.35 fb and 8.23–0.23 fb, respectively, for the same masses. These limits result in the exclusion of a narrow-width graviton with a mass below 1.2 TeV, and of narrow and 10%-width radions with masses below 2.6, and 2.9 TeV, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for top squark pair production in a final state with at least one hadronically decaying tau lepton in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search for pair production of the supersymmetric partner of the top quark, the top squark, in proton-proton collisions at $ \sqrt{s} $ = 13 TeV is presented in final states containing at least one hadronically decaying tau lepton and large missing transverse momentum. This final state is highly sensitive to scenarios of supersymmetry in which the decay of the top squark to tau leptons is enhanced. The search uses a data sample corresponding to an integrated luminosity of 138 fb$^{−1}$, which was recorded with the CMS detector during 2016–2018. No significant excess is observed with respect to the standard model predictions. Exclusion limits at 95% confidence level on the masses of the top squark and the lightest neutralino are presented under the assumptions of simplified models. The results probe top squark masses up to 1150 GeV for a nearly massless neutralino. This search covers a relatively less explored parameter space in the context of supersymmetry, and the exclusion limit is the most stringent to date for the model considered here.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

3D xRAGE simulation of inertial confinement fusion implosion with imposed mode 2 laser drive asymmetry

Low-mode asymmetries represent an important obstacle to achieving high-gain inertial confinement fusion implosions. As a step in learning how to control such effects, an OMEGA experiment with imposed mode 2 laser drive asymmetries was done to study the expected signatures of this type of asymmetry [M. Gatu Johnson et al., PRE 2018]. In the present work, a 3D xRAGE simulation including the stalk mount has been brought to bear on the data from that experiment. Furthermore, comprehensive comparisons between simulated and measured observables are made. Good agreement between simulated and measured x-ray image-inferred shell trajectories, bang times and neutron emission widths are seen, showing that the hydrodynamics are well captured in the simulation. Asymmetries seen in simulated and measured time-resolved and time-integrated x-ray images and areal densities also compare well, showing impact of both stalk and mode 2. On the other hand, important differences in measured and simulated neutron emission histories, yield, and ion temperature (T ion ) asymmetries are seen, suggesting that the simulation is overestimating shock yield. Overall, the results clearly demonstrate the importance of considering all asymmetry sources when interpreting measured signatures of asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Girth and groomed radius of jets recoiling against isolated photons in lead-lead and proton-proton collisions at $\sqrt{s_{NN}} = 5.02$ TeV

This Letter presents the first measurements of the groomed jet radius R g and the jet girth g in events with an isolated photon recoiling against a jet in lead-lead (PbPb) and proton-proton (pp) collisions at the LHC at a nucleon-nucleon center-of-mass energy of 5.02 TeV. The observables R g and g provide a quantitative measure of how narrow or broad a jet is. The analysis uses PbPb and pp data samples with integrated luminosities of 1.7 nb -1 and 301 pb -1 , respectively, collected with the CMS experiment in 2018 and 2017. Events are required to have a photon with transverse momentum $p^{γ}_{T} > 100$ GeV and at least one jet back-to-back in azimuth with respect to the photon and with transverse momentum $p^{jet}_{T}$ such that $p^{jet}_{T}/p^{γ}_{T} > 0.4$ . The measured R g and g distributions are unfolded to the particle level, which facilitates the comparison between the PbPb and pp results and with theoretical predictions. It is found that jets with $p^{jet}_{T}/p^{γ}_{T} > 0.8$ , i.e., those that closely balance the photon $p^{γ}_{T}$ , are narrower in PbPb than in pp collisions. Relaxing the selection to include jets with $p^{jet}_{T}/p^{γ}_{T} > 0.4$ reduces the narrowing of the angular structure of jets in PbPb relative to the pp reference. This shows that selection bias effects associated with jet energy loss play an important role in the interpretation of jet substructure measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Search for high-mass resonances in final states with a τ-lepton and missing transverse momentum with the ATLAS detector

A search for high-mass resonances decaying into a τ-lepton and a neutrino using proton-proton collisions at a center-of-mass energy of $\sqrt{s}$ =13 TeV is presented. The full run 2 data sample corresponding to an integrated luminosity of 139 fb -1 recorded by the ATLAS experiment in the years 2015–2018 is analyzed. The τ-lepton is reconstructed in its hadronic decay modes and the total transverse momentum carried out by neutrinos is inferred from the reconstructed missing transverse momentum. The search for new physics is performed on the transverse mass between the τ-lepton and the missing transverse momentum. No excess of events above the Standard Model expectation is observed and upper exclusion limits are set on the W' →τ⁢v production cross section. Heavy W' vector bosons with masses up to 5.0 TeV are excluded at 95% confidence level, assuming that they have the same couplings as the Standard Model W boson. For nonuniversal couplings, W' bosons are excluded for masses less than 3.5–5.0 TeV, depending on the model parameters. In addition, model-independent limits on the visible cross section times branching ratio are determined as a function of the lower threshold on the transverse mass of the τ-lepton and missing transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗