Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “zinc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Material Failure Mechanisms of Alkaline Zn Rechargeable Conversion Electrodes

Zinc (Zn) alkaline electrodes hold great importance and promise in the battery technology community, yet their behavior in real-world applications is still poorly understood. Here, we report a study of failure mechanisms and material evolution during cycling of 27 zinc–manganese dioxide (Zn–MnO 2 ) cells wherein the percent utilization of the Zn electroactive material is systematically varied between 1 and 16%. Cell fabrication is kept typical of the prevailing industrial cell design. The cycle life ranges from 2800 to 60, depending inversely on the Zn utilization. In all cases, the Zn material microstructure sheds the polytetrafluoroethylene (PTFE) binder and forms zinc oxide (ZnO) rods, with longer rods formed by lower current per Zn mass. Irreversible side reactions such as the hydrogen evolution reaction (HER), short circuits, or gas crossover cause the Zn anode’s charging efficiency to average 92% (as low as 86%), which in turn causes the baseload of metallic Zn to gradually disappear. Cell failure occurs after the baseload of metallic Zn is exhausted. The total lifetime discharge capacity remains constant near 12 ± 5 Ah/g Zn invariant of Zn utilization, which suggests that the aforementioned processes of Zn microstructural evolution and side-reaction destruction of baseload metallic zinc both progress linearly with cell capacity throughput. Manual reproduction of individual Zn failure mechanisms is performed in 22 fresh cells. Tight packing of the microstructure can lead to poor mass transfer, which causes supersaturation of soluble Zn and finally produces a high overvoltage during discharge. Here, the low charging current density yields poor coulombic efficiency due either to the competitive HER or soft short circuits.

25 ENERGY STORAGE↗
DOE OSTI2023

Structural Characterization of TRAF6 N-Terminal for Therapeutic Uses and Computational Studies on New Derivatives

Tumor necrosis factor receptor-associated factors (TRAFs) are a protein family with a wide variety of roles and binding partners. Among them, TRAF6, a ubiquitin ligase, possesses unique receptor binding specificity and shows diverse functions in immune system regulation, cellular signaling, central nervous system, and tumor formation. TRAF6 consists of an N-terminal Really Interesting New Gene (RING) domain, multiple zinc fingers, and a C-terminal TRAF domain. TRAF6 is an important therapeutic target for various disorders and structural studies of this protein are crucial for the development of next-generation therapeutics. Here, we presented a TRAF6 N-terminal structure determined at the Turkish light source “Turkish DeLight” to be 3.2 Å resolution at cryogenic temperature (PDB ID: 8HZ2). This structure offers insight into the domain organization and zinc-binding, which are critical for protein function. Since the RING domain and the zinc fingers are key targets for TRAF6 therapeutics, structural insights are crucial for future research. Separately, we rationally designed numerous new compounds and performed molecular docking studies using this template (PDB ID:8HZ2). According to the results, 10 new compounds formed key interactions with essential residues and zinc ion in the N-terminal region of TRAF6. Molecular dynamic (MD) simulations were performed for 300 ns to evaluate the stability of three docked complexes (compounds 256, 322, and 489). Compounds 256 and 489 was found to possess favorable bindings with TRAF6. These new compounds also showed moderate to good pharmacokinetic profiles, making them potential future drug candidates as TRAF6 inhibitors.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1965

Stable White Coatings

In a previous research program for the Jet Propulsion- Laboratory, extensive studies led to the development and specifications of three zinc oxide-pigmented thermal-control coatings. The principal objectives of this program are: improvement of the three paints (as engineering materials), determination of the validity of our accelerated space-simulation testing, and continuation of the zinc oxide photolysis studies begun in the preceding program. Specific tasks that are discussed include: improvement of potassium silicate coatings as engineering materials and elucidation of their storage and handling problems; improvement of methyl silicone coatings as engineering materials; studies of zinc oxide photolysis to establish reasons for the observed stability of zinc oxide; and determination of space-simulation parameters such as long-term stability (to 8000 ESH), effect of coating surface temperature on the rate of degradation, and validity of accelerated testing (by reciprocity and wavelength dependency studies).

COATING↗
NASA NTRS2000

Cardiac tissue enriched factors serum response factor and GATA-4 are mutual coregulators

Combinatorial interaction among cardiac tissue-restricted enriched transcription factors may facilitate the expression of cardiac tissue-restricted genes. Here we show that the MADS box factor serum response factor (SRF) cooperates with the zinc finger protein GATA-4 to synergistically activate numerous myogenic and nonmyogenic serum response element (SRE)-dependent promoters in CV1 fibroblasts. In the absence of GATA binding sites, synergistic activation depends on binding of SRF to the proximal CArG box sequence in the cardiac and skeletal alpha-actin promoter. GATA-4's C-terminal activation domain is obligatory for synergistic coactivation with SRF, and its N-terminal domain and first zinc finger are inhibitory. SRF and GATA-4 physically associate both in vivo and in vitro through their MADS box and the second zinc finger domains as determined by protein A pullout assays and by in vivo one-hybrid transfection assays using Gal4 fusion proteins. Other cardiovascular tissue-restricted GATA factors, such as GATA-5 and GATA-6, were equivalent to GATA-4 in coactivating SRE-dependent targets. Thus, interaction between the MADS box and C4 zinc finger proteins, a novel regulatory paradigm, mediates activation of SRF-dependent gene expression.

NASA Discipline Musculoskeletal↗
DOE OSTI2020

The electrolyte comprising more robust water and superhalides transforms Zn-metal anode reversibly and dendrite-free

A great challenge for all aqueous batteries, including Zn-metal batteries, is the parasitic hydrogen evolution reaction on the low-potential anode. Herein, we report the formula of a highly concentrated aqueous electrolyte that mitigates hydrogen evolution by transforming water molecules more inert. The electrolyte comprises primarily ZnCl 2 and LiCl as an additive, both of which are inexpensive salts. The O–H covalent bonds in water get strengthened in a chemical environment that has fewer hydrogen bonding interactions and a greater number of Zn–Cl superhalides, as suggested by integrated characterization and simulation. As a result, the average Coulombic efficiency of zinc-metal anode is raised to an unprecedented >99.7% at 1 mA cm –2 . In the new electrolyte, the plating/stripping processes leave the zinc-metal anode dendrite-free, and the zinc-metal anode delivers stable plating/stripping cycles for 4000 hours with an areal capacity of 4 mAh cm –2 at 2 mA cm –2 . Furthermore, the high Coulombic efficiency of zinc-metal anode in the ZnCl 2 -LiCl mixture electrolyte is demonstrated in full cells with a limited anode. The V 2 O 5 ·H 2 O| |Zn full cell with an N/P mass ratio of 1.2 delivers a stable life of more than 2500 cycles, and the LiMn 2 O 4 | |Zn hybrid cell with an N/P mass ratio of 0.6 exhibits 1500 cycles in its stable life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Highly Coupled Heterobicycle‐Fused Porphyrin Dimers: Excitonic Coupling and Charge Separation with Coordinated Fullerene, C 60

Abstract Porphyrin dimers have been widely explored and studied owing to their importance in photosynthetic systems. A vast variety of dimers linked by different groups and at different angles have been synthesized and studied; however, the means by which to synthesize rigidly fused porphyrins with direct conjugation of the chromophores remains limited. Such a class of porphyrins may possess interesting properties that unconjugated or stacked dimers may not exhibit. In this study, bisbenzimidazole‐fused porphyrin dimers and their mono‐ and bis−zinc derivatives are synthesized and characterized. As a consequence of excitonic coupling, these dimers exhibit a split Soret band irrespective of the metal ion in the porphyrin cavity. Steady‐state fluorescence and excitation spectra followed by femtosecond transient absorption spectral studies of the heterometallated dimer, (free‐base and zinc porphyrin) reveals the occurrence of efficient singlet‐singlet energy transfer (>95 % efficiency and rate constant >10 12 s −1 ) within the dyad. Further, donor‐acceptor conjugates were formed by metal‐ligand axial coordination of phenyl imidazole functionalized C 60 and were characterized by a variety of physicochemical techniques. Excited state charge separation from both singlet and triplet excited states of ZnP in the conjugates has been established. The lifetime of the final charge‐separated state was in the 30–40 μs range revealing charge stabilization. Interestingly, no charge separation in the conjugate derived from the heterometallated dimer was observed wherein excitation transfer dominated the process. The present study brings out the importance of the rigid π‐spacer connecting porphyrin dimers in governing the energy and electron transfer events when coupled with an electron acceptor.

Chemistry↗
DOE OSTI2026

“Antenna-like” Light-Harvesting in Partially Metalated Porphyrin Hydrogen-Bonded Organic Frameworks

Arrays of light harvesting molecules with long-range order hold promise as materials capable of efficient collection of photons as well as rapid transport of captured solar energy to chemical catalysts. Hydrogen-bonded organic frameworks (HOFs) could be promising artificial light-harvesting platforms, due to their crystalline nature and their comparative ease of synthesis. In this work, mixed-linkers of either zinc-metallated or free base tetrakis(4-carboxyphenyl)porphyrin HOFs were examined and found to demonstrate ‘antenna-like’ light harvesting behavior. Using time-resolved emission spectroscopy, Förster resonance energy transfer from zinc porphyrin to free-base porphyrin was assessed. Based on changes in the emission peak profile as the ratio of zinc porphyrin to free-base porphyrin is varied, we find that, in the limit of 100% zinc porphyrin, a photogenerated exciton can sample ~48 chromophores. These findings suggest that stacked linkers within HOFs can act as light harvesting ‘antennae’ and with encapsulation of suitable catalysts, may offer prospective application as photochemical energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Water or Anion? Uncovering the Zn 2+ Solvation Environment in Mixed Zn(TFSI) 2 and LiTFSI Water-in-Salt Electrolytes

Applications of aqueous zinc batteries for grid-scale energy storage are limited by their poor reversibility and the competing water splitting reaction. The recent invention of a water-in-salt (WIS) electrolyte concept provides a new route enabling a stable and highly reversible aqueous zinc battery chemistry. In the present work, a mixed zinc bis(trifluoromethane sulfonyl)imide (Zn(TFSI) 2 ) and LiTFSI WIS electrolyte was studied using X-ray total scattering, X-ray absorption, and Fourier transform infrared spectroscopy in conjunction with classical molecular dynamics simulations. It was found that, in the highly concentrated WIS electrolyte consisting of 1 m Zn(TFSI) 2 and 20 m LiTFSI, Zn 2+ cations are mainly solvated by six waters in their first solvation shell, while the TFSI – anions are completely excluded. This ion solvation picture is fundamentally different from the previous understandings. The results suggest that additional studies are needed to fully understand the unusual stability and reversibility of zinc-WIS electrolyte-based batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Identity of the reversible hole traps in InP/ZnSe core/shell quantum dots

Density functional theory calculations are combined with time-resolved photoluminescence experiments to identify the species responsible for reversible trapping of holes following photoexcitation of InP/ZnSe/ZnS core/shell/shell quantum dots (QDs) having excess indium in the shell. Several possible assignments are considered, and a substitutional indium adjacent to a zinc vacancy, In 3+ /V Zn 2- , is found to be the most likely. This assignment is consistent with the observation that trapping occurs only when the QD has excess indium and is supported by experiments showing that the addition of zinc oleate or acetate decreases the extent of trapping, presumably by filling some of the vacancy traps. We also show that addition of alkyl carboxylic acids causes increased trapping, presumably by creation of additional zinc vacancies. The calculations show that either a single In 2+ ion or an In 2+ -In 3+ dimer is much too easily oxidized to form the reversible traps observed experimentally, while In 3+ is far too difficult to oxidize. Additional experimental data on InP/ZnSe/ZnS QDs synthesized in the absence of chloride demonstrates that the reversible traps are not associated with Cl - . Furthermore, a zinc vacancy adjacent to a substitutional indium is calculated to have its highest occupied orbitals about 1 eV above the top of the valence band of bulk ZnSe, in the appropriate energy range to act as reversible traps for quantum confined holes in the InP valence band. The associated orbitals are predominantly composed of p orbitals on the Se atoms adjacent to the Zn vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis and functionalization of electron-deficient perfluoroalkyl porphyrin building blocks for supermolecular systems

Synthetic strategies for electron-deficient meso-perfluoroalkylporphyrins bearing diverse functional groups are described. Scalable and efficient syntheses for 5-triisopropylsilylethynyl-10,15,20-tris(heptafluoropropyl)porphyrin and 5-triisopropylsilylethynyl-10,20-bis(heptafluoropropyl)porphyrin that equip meso-ethynyl functional groups via the bilane route have been established, along with a refined route to [5,15-bis(heptafluoropropyl)porphinato]zinc(II). meso-Position halogenation of [5,15-bis(heptafluoropropyl)porphinato]zinc(II) was achieved by selective meso-nitration and subsequent reduction, diazonium salt formation, and iodination reactions. Computational data describe the low energy excited states of these chromophores and the electronic structural factors that control reactivity of these meso-perfluoroalkyl substituted porphyrin complexes. meso-Functionalized [5-triisopropylsilylethynyl-10,20-bis(heptafluoropropyl)porphinato]zinc(II) and [5-iodo-10,20-bis(heptafluoropropyl)porphinato]zinc(II) building blocks lay the foundation for the construction of highly conjugated multiporphyrin arrays that feature electronic structural properties important for the development of n-type materials and high potential photooxidants.

Chemistry↗
DOE OSTI2024

Synthesis of (oxo)chlorin dimers chelated with thallium(III)

Two target dimers have been prepared for fundamental studies of hole/electron transfer. Metalation with thallium(III) enables clocking of the rate of hole/electron transfer between the two macrocycles. Each dimer contains a diphenylethyne linker joining two identical hydroporphyrins (chlorin or oxochlorin). The linker is substituted at the 4,4′-positions whereas each (oxo)chlorin is joined at the 10-position. Each (oxo)chlorin is equipped with a gem-dimethyl group at the 18-position to stabilize the hydroporphyrin chromophore toward adventitious dehydrogenation and a 3,5-di-tert-butyl group at the 5-position to achieve increased solubilization in organic media. The dimers parallel a prior set of diphenylethyne-linked (oxo)chlorin constructs containing zinc-free base, zinc-zinc, and copper-copper metalation states that have been examined in studies of electronic communication. The building block (oxo)chlorins for preparing the thallium-containing dimers have been prepared in quantities of 32–404 mg, a scale up to 14-fold larger than previously. Thallation of the free base (oxo)chlorin dimers was achieved with excess TlCl 3 ⋅4H 2 O in CH 2 Cl 2 /CH 3 OH (3–4:1) upon overnight reaction at room temperature. The long-wavelength (Q[Formula: see text] absorption band of (oxo)chlorins lies between that of the zinc(II) and free base counterparts. Absorption spectral comparisons are provided of the thallium(III) and free base (oxo)chlorin monomers and dimers.

Chemistry↗
DOE OSTI2021

Neutron computed tomography of B12W and M8N socket sections of the Arecibo telescope

From neutron user principal investigator: We kindly request the public release of three neutron imaging datasets through ONCat. All datasets were collected from two forensic specimens, B12W and M8N, sectioned from zinc-filled steel-wire sockets recovered from the collapsed Arecibo Telescope. The dataset titled “Neutron radiographs of B12W and M8N socket sections of the Arecibo telescope” contains normalized two-dimensional (2D) neutron radiographs of the specimens, showing the geometry and spatial distribution of the steel wires embedded within the zinc matrix, as well as internal features such as voids and cracks. The dataset titled “Neutron computed tomography of B12W and M8N socket sections of the Arecibo telescope” contains normalized 2D neutron projection images acquired over a range of specimen rotation angles for one selected region of each specimen. These projection images were used to reconstruct three-dimensional (3D) tomographic volumes that reveal the embedded-wire geometry and internal defects. The dataset titled “Bragg edge imaging (BEI) of B12W and M8N socket sections of the Arecibo telescope” contains six time-of-flight (TOF) neutron imaging datasets, three from each specimen, acquired at regions of interest selected based on the radiographs. The spatially resolved 2D TOF images show the zinc matrix and embedded steel wires, and the wavelength-dependent neutron transmission data were used to characterize crystallographic texture within the zinc. All components and their condition are in the public domain as they are the property of the National Science Foundation (NSF). The neutron imaging data, part geometries, and detailed forensic information have been widely published in the Arecibo Telescope Collapse Forensic Report by Thornton Tomasetti Engineers and others (NASA report and NASEM report).

Bilheux, Hassina↗
NASA NTRS1972

Development of GaAs solar cells

Solar cells and mesa diodes were fabricated by the implantation of zinc or beryllium ions into n-type gallium arsenide. Annealing temperatures above 750 C (zinc) or 650 C (beryllium) were found to produce 50% to 100% activation of the implanted ions. Junction depths of about 0.4 micron were produced by 600 keV zinc implants or 70 keV beryllium implants. P-layer sheet resistance was about 150 ohms for 2 x 10 to the 15th power cm/2 zinc or 1 x 10 to the 15th power cm/2 beryllium implants. This is sufficiently low for efficient solar cell fabrication. Contacting procedures were improved to yield reproducibly adherent, low resistance front and back contacts.

Source record↗
NASA NTRS1974

M558 radioactive tracer diffusion

This experiment was performed in Skylab 3 with two objectives in mind. First, the experimental self-diffusion coefficients for liquid zinc were to be determined in a convection-free environment. Secondly the reduction in convective mixing in earth gravity by going into the zero-gravity environment of space was to be estimated. The experiment was designed to utilize high temperatures and linear thermal gradients provided by the M518 Multipurpose Electric Furnace, and the radioactivity of zinc-65 of 245-day half-life to investigate self-diffusion in liquid zinc. The distribution of zinc-65 tracer, after melting, maintaining at soak temperature for 1 hour of soak time and then resolidifying, was obtained by sample sectioning. The concentration of activity of each section (microcurie-gram) was plotted against positions along the sample axial and radial position. Experimental data and theoretical results from solution of Fick's law of diffusion in one dimensional were compared. Samples tested on earth showed very rapid diffusion. Diffusion coefficient in unit gravity was 50 times the zero-gravity diffusion coefficient of Skylab.

Ukanwa, A. O.↗
NASA NTRS1976

Evaluation of selected chemical processes for production of low-cost silicon

Plant construction costs and manufacturing costs were estimated for the production of solar-grade silicon by the reduction of silicon tetrachloride in a fluidized bed of seed particles, and several modifications of the iodide process using either thermal decomposition on heated filaments (rods) or hydrogen reduction in a fluidized bed of seed particles. Energy consumption data for the zinc reduction process and each of the iodide process options are given and all appear to be acceptable from the standpoint of energy pay back. Information is presented on the experimental zinc reduction of SiCl4 and electrolytic recovery of zinc from ZnCl2. All of the experimental work performed thus far has supported the initial assumption as to technical feasibility of producing semiconductor silicon by the zinc reduction or iodide processes proposed. The results of a more thorough thermodynamic evaluation of the iodination of silicon oxide/carbon mixtures are presented which explain apparent inconsistencies in an earlier cursory examination of the system.

Blocher, J. M., Jr.↗
NASA NTRS1994

New rubber qualification for the igniter adapter

Kirkhill Rubber Company (KRC) has informed Thiokol Corporation that two raw materials used in the asbestos and silica filled acrylonitrile butadience rubber (NBR) formulation per STW 2621 are no longer available from their vendors. Agerite White (Di-beta-naphthyl-paraphenylene diamine), manufactured by B. F. Goodrich, is an antioxidant used in NBR. This raw material makes up roughly 1-2 percent of the finished product. KRC proposed that this raw material be replaced by Agerite Stalite S (mixture of octylated diphenylamines) distributed by R. T. Vanderbilt Co. Protox-166 zinc oxide, manufactured by Zinc Corporation of America, is an activator currently used in NBR. This material also makes up about 1-2 percent of the finished material. Protox-166 is an American process grade zinc oxide. It is proposed by KRC to replace Protox-166 with Kadox-930C, a French process grade zinc oxide. American process grades have an ASTM minimum purity of 99.0 percent; the French process grades have a minimum purity of 99.5 percent. Previous testing per WTP-0270 has demonstrated that the mechanical and thermal properties of the rubber with the new ingredients are comparable to the 'old' rubber. The test results are reported in TWR-61790. One igniter adapter, Part no. 7U77562-02 serial no. 2 was insulated per ETP-1206 using the new rubber formulation and a modified lay up and cure method to demonstrate that there is no impact on this process. The results of this demonstration are reported.

Humpherys, Mark A.↗
NASA NTRS1994

Primary battery design and safety guidelines handbook

This handbook provides engineers and safety personnel with guidelines for the safe design or selection and use of primary batteries in spaceflight programs. Types of primary batteries described are silver oxide zinc alkaline, carbon-zinc, zinc-air alkaline, manganese dioxide-zionc alkaline, mercuric oxide-zinc alkaline, and lithium anode cells. Along with typical applications, the discussions of the individual battery types include electrochemistry, construction, capacities and configurations, and appropriate safety measures. A chapter on general battery safety covers hazard sources and controls applicable to all battery types. Guidelines are given for qualification and acceptance testing that should precede space applications. Permissible failure levels for NASA applications are discussed.

Bragg, Bobby J.↗
NASA NTRS1995

Defect characterization in ZnGeP2 by time-resolved photoluminescence

The native defect-related optical properties of ZnGeP2 are studied by steady-state and time-resolved photoluminescence. ZnGeP2 crystals grown from the vapor phase by high pressure physical vapor transport (HPVT) and from the melt by gradient freezing (GF) show a broad infrared emission with peak position at 1.2 eV with a decay time constant of a few micro-s and a faster recombination center peaked at 1.68 eV. The decay transient for the emission at 1.2 eV exhibits features of classical donor-acceptor recombination and is linked to close-pairs that are tentatively associated with germanium-on-zinc antisite donors and zinc vacancy acceptors. Higher energetic luminescence structures at 1.6eV and 1.7eV are revealed after annealing of the ZnGeP2 crystals and are associated with the formation zinc and phosphorous vacancies in the near surface region. ZnGeP2 crystals grown by HPVT from zinc and phosphorus supersaturated vapor compositions show additional emission structure at 1.8 eV and a sharp donor-acceptor emission at 1.778 eV that is related to the presence of additional donor states.

Dietz, N.↗