Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wake model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Development of UMARC (University of Maryland Advanced Rotorcraft Code)

The University of Maryland Advanced Rotorcraft Code (UMARC) is a user-friendly, FEM-based comprehensive helicopter rotor simulation code of high numerical robustness and computational efficiency. UMARC formulates the rotor-fuselage equations using Hamilton's principle, and are discretized using finite elements in space and time. The FEM formulation allows the code to analyze a wide variety of rotor designs. Dynamic inflow modeling is used for unsteady wake inflow computations. Predicted stability, response, and blade-load data are validated with experimental data for several configurations, including representative articulated, hingeless, and bearingless rotors.

Bir, Gunjit↗

Investigation of aerothermodynamics and optical radiation in the AFE hypersonic flow field

Research for the radiation experiments on the Aeroassist Flight Experiment (AFE) was performed to obtain a data base for development of engineering requirements for aerobrakes. Due to funding restrictions, the necessary Aerobrake design data were obtained from ground based experiments, specifically arc-jet wind tunnels. Except for the instrument windows, final development of the AFE radiometers was completed. Window definition included several designs to be flight validated in arc-jets. This work was completed, and successful designs have evolved which will yield full scientific return from the flight experiment. The theoretical work includes final code development to describe the spacecraft environment to support instrument definition, optical radiation codes that operate at significantly improved speeds, and calculation of radiation forebody loads and effects on experiment objectives for varying AFE weights and trajectories. Furthermore, radiant flux vectors at the AFE base were predicted to be used for afterbody instrument definition. The Vacuum Ultraviolet Experiment for the Arc-Jet was completed, and arc-jet experiment conditions and experiment objectives were refined to incorporate the most current thinking. Ballistic range experiments were completed. Several shadowgraphs indicating corner turning angles and waviness structures were obtained, and the results were used to estimate the compression region location for the AFE flight. The waviness measured has helped to model the temporal variations of wake radiation for purposes of defining radiometers to measure the energy content of wake dynamics.

Palumbo, Giusseppe↗

Acoustic flight test experience with the XV-15 Tiltrotor aircraft with the Advanced Technology Blade (ATB)

An acoustic model that predicts the discrete frequency noise characteristics of helicopter rotors has been utilized in an analysis to help identify source characteristics. This technique incorporated a NASA Langley developed acoustic prediction technique, and a simplified flow field model to account for rotor wake reingestion in hover. The vehicle rotor system was modified to include the ATBs that were designed to provide for higher operating weights and improved maneuver load factor in helicopter and transition modes of operation.

Hoad, Danny R.↗

Measurements of the Buffeting Loads on the Wing and Horizontal Tail of a 1/4-scale Model of the X-1E Airplane

The buffeting loads acting on the wing and horizontal tail of a 1/4-scale model of the X-1E airplane have been measured in the Langley 16-foot transonic tunnel in the Mach number range from 0.40 to 0.90. When the buffeting loads were reduced to a nondimensional aerodynamic coefficient of buffeting intensity, it was found that the maximum buffeting intensity of the horizontal tail was about twice as large as that of the wing. Comparison of power spectra of buffeting loads acting on the horizontal tail of the airplaneand of the model indicated that the model horizontal tail, which was of conventional force-test-model design, responded in an entirely different mode than did the airplane.This result implied that if quantitative extrapolation of model data to flight conditions were desired a dynamically scaled model of the rearward portion of the fuselage and empennage would be required. A study of the sources of horizontal-tail buffeting of the model indicated that the wing wake contributed a large part of the total buffeting load. At one condition it was found that removal of the wing wake would reduce the buffeting loads on the horizontal tail to about one-third of the original value.

Rainey, A Gerald↗

Turbulence models for compressible boundary layers

It is shown that to satisfy the general accepted compressible law of the wall derived from the Van Driest transformation, turbulence modeling coefficients must actually be functions of density gradients. The transformed velocity profiles obtained by using standard turbulence model constants have too small a value of the effective von Karman constant kappa in the log-law region (inner layer). Thus, if the model is otherwise accurate, the wake component is overpredicted and the predicted skin friction is lower than the expected value.

Huang, P. G.↗

A New Procedure for Simulating Unsteady Flows Through Turbomachinery Blade Passages

The development of two new unsteady wake-blade row aerodynamic interaction models and of a rotor-stator unsteady aerodynamic interaction model are outlined. The solutions of Adamczyk's average-passage flow model were used. The responses to the potential disturbances through a blade row were calculated using the MSUTC code. This code can run with and without the use of wall functions. The solver is an implicit finite volume method with flux Jacobians which are evaluated by the flux-vector splitting and the residual fluxes by the Roe's flux-difference splitting.

Chen, Jen Ping↗

The Generation of Smooth High Speed Solar Wind from Plume-Interplume Mixing

Plumes and rays are magnetic field aligned density striations in coronal holes with different values of plasma beta. The overall plasma beta is very small in the low corona but exceeds unity beyond 15-20 solar radius. High speed solar wind reported beyond 0.3 AU is relatively smooth and uniform and known to originate from the much filamented coronal hole. Thus the obvious question is how to generate a smooth solar wind from seemingly filamentary structure. Hence one has to find a mechanism to substantiate this apparent observed (Ulysses) phenomenon. To do this we model plumes as jets (or wakes) of plasma emitted from the solar surface. The shear between a jet and its ambient is known to become unstable to the MHD Kelvin-Helmholtz ("KH") instability if the Alfven Mach number of the jet is greater than one and the uniform external magnetic field is small. Starting with a simple configuration we consider a jet of half thickness R, having uniform density and uniform internal magnetic field. The external medium has also a uniform density and uniform magnetic field. The jet is perturbed at the boundary with a linear amplitude and fixed frequency. We simulate the coronal jet using the 3D ZEUS code. The first results indicate the slab jet is unstable to the MHD KH instability at 5-10 solar radius for some angle of wave propagation. The propagating instability may smooth the filamented flow. It may also produce the entrained Alfvenic fluctuations observed by Ulysses in the high speed wind. We are at present determining the parameters which induce large growth rate. This may clarify the mystery behind the emergence of fast smooth solar wind from very filamentary structures in coronal holes. Also, using the dispersion relation already available for such a flow we obtain some general description of the instability criteria for the KH instability at a jet interface.

Parhi, Shyamsundar↗

Small Business Innovations (Helicopters)

The amount of engine power required for a helicopter to hover is an important, but difficult, consideration in helicopter design. The EHPIC program model produces converged, freely distorted wake geometries that generate accurate analysis of wake-induced downwash, allowing good predictions of rotor thrust and power requirements. Continuum Dynamics, Inc., the Small Business Innovation Research (SBIR) company that developed EHPIC, also produces RotorCRAFT, a program for analysis of aerodynamic loading of helicopter blades in forward flight. Both helicopter codes have been licensed to commercial manufacturers.

Source record↗

Active Control of Separation from the Slat Shoulder of a Supercritical Airfoil

Active flow control in the form of zero-mass-flux excitation was applied at the slat shoulder of a simplified high-lift airfoil to delay flow separation. The NASA Energy Efficient Transport (EET) supercritical airfoil was equipped with a 15% chord simply hinged leading edge slat and a 25% chord simply hinged trailing edge flap. The cruise configuration data was successfully reproduced, repeating previous experiments. The effects of flap and slat deflection angles on the performance of the airfoil integral parameters were quantified. Detailed flow features were measured as well, in an attempt to identify optimal actuator placement. The measurements included: steady and unsteady model and tunnel wall pressures, wake surveys, arrays of surface hot-films, flow visualization and Particle Image Velocimetry (PIV). High frequency periodic excitation was applied to delay the occurrence of slat stall and improve the maximum lift by 10 to 15%. Low frequency amplitude modulation was used to reduce the oscillatory momentum coefficient by roughly 50% with similar aerodynamic performance.

Pack, LaTunia G.↗

Active Control of Separation From the Flap of a Supercritical Airfoil

Active flow control in the form of periodic zero-mass-flux excitation was applied at several regions on the leading edge and trailing edge flaps of a simplified high-lift system t o delay flow separation. The NASA Energy Efficient Transport (EET) supercritical airfoil was equipped with a 15% chord simply hinged leading edge flap and a 25% chord simply hinged trailing edge flap. Detailed flow features were measured in an attempt to identify optimal actuator placement. The measurements included steady and unsteady model and tunnel wall pressures, wake surveys, arrays of surface hot-films, flow visualization, and particle image velocimetry (PIV). The current paper describes the application of active separation control at several locations on the deflected trailing edge flap. High frequency (F(+) approx.= 10) and low frequency amplitude modulation (F(+)AM approx.= 1) of the high frequency excitation were used for control. Preliminary efforts to combine leading and trailing edge flap excitations are also reported.

Melton, La Tunia Pack↗

Active Control of Separation From the Flap of a Supercritical Airfoil

Zero-mass-flux periodic excitation was applied at several regions on a simplified high-lift system to delay the occurrence of flow separation. The NASA Energy Efficient Transport (EET) supercritical airfoil was equipped with a 15% chord simply hinged leading edge flap and a 25% chord simply hinged trailing edge flap. Detailed flow features were measured in an attempt to identify optimal actuator placement. The measurements included steady and unsteady model and tunnel wall pressures, wake surveys, arrays of surface hot-films, flow visualization, and particle image velocimetry (PIV). The current paper describes the application of active separation control at several locations on the deflected trailing edge flap. High frequency (F(+) approximately equal to 10) and low frequency amplitude modulation (F(+) sub AM approximately equal to 1) of the high frequency excitation were used for control. It was noted that the same performance gains were obtained with amplitude modulation and required only 30% of the momentum input required by pure sine excitation.

Melton, LaTunia Pack↗

Direct simulation Monte Carlo and Navier-Stokes simulations of blunt body wake flows

Numerical results obtained with direct simulation Monte Carlo and Navier-Stokes methods are presented for a Mach-20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are considered with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is on the wake structure: how the wake structure changes as a function of rare faction, what the afterbody levels of heating are, and to what limits the continuum models are realistic as rarefunction in the wake is progressively increased. Calculations are made with and without an afterbody sting. Results for the afterbody sting are emphasized in anticipation of an experimental study for the current flow conditions and model configuration. The Navier-Stokes calculations were made with and without slip boundary conditions. Comparisons of the results obtained with the two simulation methodologies are made for both flowfield structure and surface quantities.

WAKE STRUCTURE↗

DSMC calculations for 70-deg blunted cone at 3.2 km/s in nitrogen

Numerical results obtained with the direct simulation Monte Carlo (DSMC) method are presented for Mach 15.6 nitrogen flow about a 70-deg spherically blunted cone at zero incidence. This flow condition is one of several generated in the Large Energy National Shock (LENS) tunnel during tests of a 15.24 cm diameter model with an afterbody sting. The freestream Knudsen number, based on model diameter, is 0.0023. The focus of the DSMC calculations is to characterize the near wake flow under conditions where rarefaction effects may influence afterbody aerothermal loads. This report provides information concerning computational details along with flowfield and surface quantities. Calculations show that the flow enveloping the test model is in thermal nonequilibrium and a sizable vortex develops in the near wake. Along the model baseplane the heating rates are about 0.6 percent of the forebody stagnation value while the maximum heating along the sting is about 4.2 percent of the forebody stagnation value. Comparison of a Navier-Stokes solution with the present calculations show good agreement for surface heating, pressure, and skin friction results.

Moss, J. N.↗

Validation of Wind Power Plant Modeling Approaches in Complex Terrain: Preprint

The effect of terrain on wind-plant aerodynamics is often neglected due to the complex dynamics that make up terrain-atmosphere-turbine interactions and the computational effort required to adequately resolve the relevant physics. In this work, a comprehensive set of measurements (from the Wind Forecast Improvement Project 2) and two distinct modeling approaches are used to investigate the effects of topography on plant performance. The first approach consists of high-fidelity large-eddy simulations conducted for a one- hour period on a terrain-resolving mesh, and producing unsteady, heterogeneous flow that is sensitive to the local topography. The second approach makes use of a steady-state engineering model that has been modified to account for terrain effects. In situ and remote- sensing measurements upstream of the wind plant are used to prescribe initial and boundary conditions to the models, while wind turbine power measurements are used to assess the ability of the different models to capture the effects of terrain on turbine wake dynamics and therefore power production. The full paper will quantify the degree to which our high-fidelity and engineering models are able to capture realistic wind plant aerodynamics in complex terrain, and through improved understanding of the underlying physics, inform our model development efforts.

17 WIND ENERGY↗

The calculation of rotor/fuselage interaction for two-dimensional bodies

Unsteady rotor wake interactions with the empennage, tail boom, and other aerodynamic surfaces have a significant influence on the aerodynamic performance of the helicopter, ride quality, and vibration. A Computational Fluid Dynamic (CFD) method for computing the aerodynamic interaction between an interacting vortex wake and the viscous flow about arbitrary 2-D bodies was developed to address this helicopter problem. The vorticity and flow field velocities are calculated on a body-fitted computational mesh using an uncoupled iterative solution. The interacting vortex wake is represented by an array of discrete vortices which, in turn, are represented by a finite core model. The evolution of the interacting vortex wake is calculated by Lagrangian techniques. The flow around circular and elliptic cylinders in the absence of an interacting vortex wake was calculated. These results compare very well with other numerical results and with results obtained from experiment and thereby demonstrate the accuracy of the viscous solution. The interaction of a simulated rotor wake with the flow about 2-D bodies, representing cross sections of fuselage components, was calculated to address the vortex interaction problem. The vortex interaction was calculated for the flow about a circular and an elliptic cylinder at 45 and 90 degrees incidence. The results demonstrate the significant variation in lift and drag on the 2-D bodies during the vortex interaction.

Stremel, Paul M.↗

Direct simulation Monte Carlo and Navier-Stokes simulations of blunt body wake flows

Numerical results obtained with direct simulation Monte Carlo and Navier-Stokes methods are presented for a Mach-20 nitrogen flow about a 70-deg blunted cone. The flow conditions simuulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are considered with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is on the wake structure: how the wake structure changes as a function of rarefaction, what the afterbody levels of heating are, and to what limits the continuum models are realistic as rarefaction in the wake is progressively increased. Calculations are made with and without an afterbody sting. Results for the after body sting are emphasizes in anticipation of an experimental study for the current flow conditions and model configuration. The Navier-Stokes calculations were made with and without slip boundary conditions. Comparisons of the results obtained with the two simulation methodologies are made for both flowfield structure and surface quantities.

Moss, James N.↗

Mapping the Planetary Wake in HD 163296 with Kinematics

Abstract We map the planetary wake associated with the embedded protoplanet creating the CO kink in the disk of HD 163296. We show that the wake can be traced by a series of correlated perturbations in the peak velocity map. The sign change of the perturbations across the disk’s major axis confirms that the wake induces predominantly radial motion, as predicted by models of planet–disk interaction. These results provide the first direct confirmation of planet wakes generated by Lindblad resonances. Mapping the wake provides a constraint on the disk aspect ratio, which is required to measure the mass of the planet.

79 ASTRONOMY AND ASTROPHYSICS↗

Aerodynamic interaction between vortical wakes and lifting two-dimensional bodies

Unsteady rotor wake interactions with the empennage, tail boom, and other aerodynamic surfaces of a helicopter have a significant influence on its aerodynamic performance, the ride quality, and vibration. A numerical method for computing the aerodynamic interaction between an interacting vortex wake and the viscous flow about arbitrary two-dimensional bodies was developed to address this helicopter problem. The method solves for the flow field velocities on a body-fitted computational mesh using finite-difference techniques. The interacting vortex wake is represented by an array of discrete vortices which, in turn, are represented by a finite-core model. The evolution of the interacting vortex wake is calculated by Lagrangian techniques. The viscous flow field of the two-dimensional body is calculated on an Eulerian grid. The flow around circular and elliptic cylinders in the absence of an interacting vortex wake was calculated. These results compare very well with other numerical results and with results obtained from experiment and thereby demonstrate the accuracy of the viscous solution. The interaction of a rotor wake with the flow about a 4 to 1 elliptic cylinder at 45 degree incidence was calculated for a Reynolds number of 3000. The results demonstrate the significant variations in the lift and drag on the elliptic cylinder in the presence of the interacting rotor wake.

Stremel, Paul M.↗