Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trend analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Air Pollution Over the Ganges Basin and Northwest Bay of Bengal in the Early Postmonsoon Season Based on NASA MERRAero Data

The MERRA Aerosol Reanalysis (MERRAero) has been recently developed at NASA's Global Modeling Assimilation Office. This reanalysis is based on a version of the Goddard Earth Observing System-5 (GEOS-5) model radiatively coupled with Goddard Chemistry, Aerosol, Radiation, and Transport aerosols, and it includes assimilation of bias-corrected aerosol optical thickness (AOT) from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor on both Terra and Aqua satellites. In October over the period 2002-2009, MERRAero showed that AOT was lower over the east of the Ganges basin than over the northwest of the Ganges basin: this was despite the fact that the east of the Ganges basin should have produced higher anthropogenic aerosol emissions because of higher population density, increased industrial output, and transportation. This is evidence that higher aerosol emissions do not always correspond to higher AOT over the areas where the effects of meteorological factors on AOT dominate those of aerosol emissions. MODIS AOT assimilation was essential for correcting modeled AOT mainly over the northwest of the Ganges basin, where AOT increments were maximal. Over the east of the Ganges basin and northwest Bay of Bengal (BoB), AOT increments were low and MODIS AOT assimilation did not contribute significantly to modeled AOT. Our analysis showed that increasing AOT trends over northwest BoB (exceeding those over the east of the Ganges basin) were reproduced by GEOS-5, not because of MODIS AOT assimilation butmainly because of the model capability of reproducing meteorological factors contributing to AOT trends. Moreover, vertically integrated aerosol mass flux was sensitive to wind convergence causing aerosol accumulation over northwest BoB.

AOT↗

Widely Distributed Exogenic Materials of Varying Compositions and Morphologies on Asteroid (101955) Bennu

Using the multiband imager MapCam on board the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 μm that is indicative of anhydrous silicates. The exogenic materials are spatially resolved by the telescopic camera PolyCam. All such materials are brighter than their surroundings, and they are expressed in a variety of morphologies: homogeneous, breccia-like, inclusion-like, and others. Inclusion-like features are the most common. Visible spectrophotometry was obtained for 46 of the 77 locations from MapCam images. Principal component analysis indicates at least two trends: (i) mixing of Bennu's average spectrum with a strong 1-μm band absorption, possibly from pyroxene-rich material, and (ii) mixing with a weak 1-μm band absorption. The end member with a strong 1-μm feature is consistent with Howardite-Eucrite-Diogenite (HED) meteorites, whereas the one showing a weak 1-μm feature may be consistent with HEDs, ordinary chondrites, or carbonaceous chondrites. The variation in the few available near-infrared reflectance spectra strongly suggests varying compositions among the exogenic materials. Thus, Bennu might record the remnants of multiple impacts with different compositions to its parent body, which could have happened in the very early history of the Solar system. Moreover, at least one of the exogenic objects is compositionally different from the exogenic materials found on the similar asteroid (162173) Ryugu, and they suggest different impact tracks.

minor planets↗

Overview of NASA’s Science Mission Directorate Small Satellites Programs and Advances in Transformative Science Measurements with Small Satellites

Small satellites have become an accepted platform for enabling high-quality science measurements and observations. NASA missions have leveraged advances in sensor miniaturization, technology innovations, and new small satellite mission architectures to support high spatial and temporal measurements, continuity measurements, and constellations in response to science objectives described in NASA’s Decadal Surveys. Across six divisions of the Science Mission Directorate (SMD), over 12 years, SMD has funded 88 CubeSat/ SmallSat Missions and 59 Studies to date. Currently, SMD has 53 small spacecraft science missions (87spacecraft) in implementation or formulation. This paper provides the background of efforts to promote the implementation of small satellites within NASA as a balanced portfolio for the agency’s science, technology, and exploration goals. We include analysis of SmallSat awards and trends funded by SMD through Research Opportunities in Space and Earth Sciences (ROSES), Small Innovative Missions for Planetary Exploration (SIMPLEx), and Small Explorer (SMEX) and Medium Explorer (MIDEX) calls over the last 12years. The data source of this assessment is a subset of the NASA SmallSat Coordination Group Database, a collection of all known funded NASA SmallSat and CubeSat missions and studies. This paper also provides an overview of small satellite programs and selected missions from SMD’s divisions: Astrophysics, Heliophysics, Earth Science, and Planetary Science, and describes SMD’s efforts in fostering an incremental and continuous path to achieve high-priority science through transformative science measurements. This paper recognizes the latest observations and trends of the NASA CubeSat / SmallSat Science missions with masses ranging between 1kg to 500kg.

Small Satellites, SMD SmallSat, CubeSat,↗

Advances in Transformative Science Measurements with Small Satellites

Small satellites have become an accepted platform for enabling high-quality science measurements and observations. NASA missions have leveraged advances in sensor miniaturization, technology innovations, and new small satellite mission architectures to support high spatial and temporal measurements, continuity measurements, and constellations in response to science objectives described in NASA’s Decadal Surveys. Across six divisions of the Science Mission Directorate (SMD), over 12 years, SMD has funded 88 CubeSat/ SmallSat Missions and 59 Studies to date. Currently, SMD has 53 small spacecraft science missions (87spacecraft) in implementation or formulation. This paper provides the background of efforts to promote the implementation of small satellites within NASA as a balanced portfolio for the agency’s science, technology, and exploration goals. We include analysis of SmallSat awards and trends funded by SMD through Research Opportunities in Space and Earth Sciences (ROSES), Small Innovative Missions for Planetary Exploration (SIMPLEx), and Small Explorer (SMEX) and Medium Explorer (MIDEX) calls over the last 12years. The data source of this assessment is a subset of the NASA SmallSat Coordination Group Database, a collection of all known funded NASA SmallSat and CubeSat missions and studies. This paper also provides an overview of small satellite programs and selected missions from SMD’s divisions: Astrophysics, Heliophysics, Earth Science, and Planetary Science, and describes SMD’s efforts in fostering an incremental and continuous path to achieve high-priority science through transformative science measurements. This presentation recognizes the latest observations and trends of the NASA CubeSat / SmallSat Science missions with masses ranging between 1kg to 500kg.

Small Satellites, SMD SmallSat, CubeSat↗

Improved rubber nanofillers

During this task, Silane functionalized TiO2 and HK3Ti4O4(SiO4)3 were sent to Goodyear (GY) for testing. These materials were characterized based on their interaction with the model elastomer, squalene. The Van der Waals interactions and Hamaker Constants for ZnO particles in squalene and rubber materials were characterized and it was determined that a 10-20 nm spacing was necessary between primary filler particles to maintain a stable nanocomposite. Contact angle measurements on the ZnO and ZnO-silane materials indicated that the solvent should wet the particles, and solvophobic attractions should not be present. These studies showed that the surface modification with sulfosilane coupling agents was successful, and high levels of dispersion of the particles remained possible. Further, a novel surface charging phenomenon where negative surface charging is developed in the squalene environment was observed and corroborated by measurements of particle size and of the surface modified materials in squalene. This impacts the dispersion of the particles according to the traditional colloidal interpretation of electrostatic repulsive forces between particles. Additionally, thin nanocomposite fibers were developed using electrospinning. The size and shape of the oxides did not change during the electrospinning process, although the shape of the fiber and the distribution of the particles, particularly for ZnO, was not ideal. There was an obvious increase in elastic modulus and hardness from the addition of the oxides, but differentiating the oxides, and particularly the surfactants, was difficult. The A-1289 lead to the greatest dispersion of the filler particles, while the A-1589 and the NXT produced clustered particle aggregates. This agrees with previous study of these materials in low molecular weight squalene solvent studies reported earlier. The behavior of the nanoparticle ZnO and the microparticle silica is different as well, with the ZnO being contained within the elastomer, and the SiO2 forming monolayers at the surface of the elastomer. The dynamic mechanical analysis did not show clear trends between the surface modification and the aggregate structure. In the silica particles, the NXT led to the least particle interaction, followed by the A-1289 and highest particle interaction found for the A-1589. For the nanosized ZnO, the best dispersion was found for the A-1589, with both the A-1289 and NXT exhibiting frequency dependent responses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using Water-Level Models to Conceptualize Groundwater-Flow Systems: Examples from the Nevada National Security Site - 17044

Analysis of water-level trends in well hydro-graphs can be used to better understand and conceptualize a groundwater-flow system. A water-level trend reflects the summation of all natural and anthropogenic stresses acting on the aquifer at the well location. Common stresses include recharge, evapotranspiration, barometric pressure, earth tides, and pumping. A water-level model (WLM) can be used as a tool to distinguish which stresses are affecting the trend and quantify the impact of each stress on the trend. A WLM is an analytical model that fits measured water levels to a synthetic curve representing the sum of one or more time-series components that explain the water-level trend. Time-series components include recharge pulses simulated with Gamma transforms of precipitation; long-term climatic trends and barometric-pressure responses simulated with moving averages of barometric pressure and water levels in background wells; tidal responses computed from theoretical tidal signals; and pumping drawdown simulated with Theis models. WLM examples are presented to show how to: (1) determine and decompose stresses affecting long-term water levels in wells; and (2) estimate short-term draw-downs in observation wells where drawdown is masked by environmental water-level fluctuations. (authors)

58 GEOSCIENCES↗

Assessing the Performance of Pump-and-Treat Systems - 16380

Pump-and-treat (P and T) is a common groundwater remedy. However, a challenge with P and T remedies has been in evaluating their performance. A structured approach can be applied to gathering the information needed to support assessment of P and T remedies and decisions to close the remedy, continue P and T, optimize the P and T system, or transition to other remedy approaches. Supportive decision elements include analysis of contaminant concentrations and trends, quantifying contaminant mass discharge of plume and source zone, quantifying the attenuation capacity of the aquifer, using tools to predict future plume behavior and time to reach remedial action objectives, and information about the current P and T system design and operations. Several sites have successfully conducted a P and T performance assessment and supported decisions to change their remedy approach. These case studies are discussed in relation to a recent document, Performance Assessment for Pump-and-Treat Closure or Transition, that provides guidance for the assessment process and associate remedy decisions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hazard function theory for nonstationary natural hazards

Impact from natural hazards is a shared global problem that causes tremendous loss of life and property, economic cost, and damage to the environment. Increasingly, many natural processes show evidence of nonstationary behavior including wind speeds, landslides, wildfires, precipitation, streamflow, sea levels, and earthquakes. Traditional probabilistic analysis of natural hazards based on peaks over threshold (POT) generally assumes stationarity in the magnitudes and arrivals of events, i.e., that the probability of exceedance of some critical event is constant through time. Given increasing evidence of trends in natural hazards, new methods are needed to characterize their probabilistic behavior. The well-developed field of hazard function analysis (HFA) is ideally suited to this problem because its primary goal is to describe changes in the exceedance probability of an event over time. HFA is widely used in medicine, manufacturing, actuarial statistics, reliability engineering, economics, and elsewhere. HFA provides a rich theory to relate the natural hazard event series ( X ) with its failure time series ( T ), enabling computation of corresponding average return periods, risk, and reliabilities associated with nonstationary event series. This work investigates the suitability of HFA to characterize nonstationary natural hazards whose POT magnitudes are assumed to follow the widely applied generalized Pareto model. We derive the hazard function for this case and demonstrate how metrics such as reliability and average return period are impacted by nonstationarity and discuss the implications for planning and design. As a result, our theoretical analysis linking hazard random variable X with corresponding failure time series T should have application to a wide class of natural hazards with opportunities for future extensions.

54 ENVIRONMENTAL SCIENCES↗

Fractionation of Palliative Radiation Therapy for Bone Metastases in Ontario: Do Practice Guidelines Guide Practice?

Purpose: To evaluate the effect of a provincial practice guideline on the fractionation of palliative radiation therapy for bone metastases (PRT.B) in Ontario. Methods and Materials: The present retrospective study used electronic treatment records linked to Ontario's population-based cancer registry. Hierarchical multivariable regression analysis was used to evaluate temporal trends in the use of single fractions (SFs), controlling for patient-related factors associated with the use of SFs. Results: From 1984 to 2012, 43.9% of 161,835 courses of PRT.B were administered as SFs. The percentage of SF courses was greater for older patients (age <50 years, 39.8% vs age >80 years, 52.5%), those with a shorter life expectancy (survival >12 months, 36.9% vs < 1 month, 53.6%), and those who lived farther from a radiation therapy center (<10 km, 42.1% vs > 50 km, 47.3%). The percentage of SFs to spinal fields was lower than that to other skeletal sites (31.5% vs 57.1%). The percentage of SFs varied among the cancer centers (range, 26.0%-67.8%). These differences were all highly significant in the multivariable analysis (P<.0001). In 2004, Cancer Care Ontario released a practice guideline endorsing the use of SFs for uncomplicated bone metastases. The rate of use of SFs increased from 42.3% in the pre-guideline period (1999-2003) to 52.6% in the immediate post-guideline period (2004-2007). However, it subsequently decreased again to 44.0% (2009-2012). These temporal trends were significant after controlling for patient-related factors in the multivariable analysis (P<.0001). Large intercenter variations in the use of SFs persisted after publication of the guideline. Conclusions: The publication of an Ontario practice guideline endorsing the use of SF PRT.B was associated with only a transient increase in the use of SFs in Ontario and did little to reduce intercenter variations in fractionation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantifying Main Trends in Lysozyme Nucleation: The Effect of Precipitant Concentration and Impurities

Full factorial experiment design incorporating multi-linear regression analysis of the experimental data allows the main trends and effects to be quickly identified while using only a limited number of experiments. These techniques were used to identify the effect of precipitant concentration and the presence of an impurity, the physiological lysozyme dimer, on the nucleation rate and crystal dimensions of the tetragonal form of chicken egg white lysozyme. Increasing precipitant concentration was found to decrease crystal numbers, the magnitude of this effect also depending on the supersaturation. The presence of the dimer generally increased nucleation. The crystal axial ratio decreased with increasing precipitant concentration independent of impurity.

Burke, Michael W.↗

Evaluation of historical precipitation interannual variability in CMIP6 over the United States

Interannual precipitation variability profoundly influences society via its effects on agriculture, water resources, infrastructure, and disaster risks. In this study, we use daily in situ precipitation observations from the global historical climatology network-daily (GHCN-D) to assess the ability of 21 Coupled Model Intercomparison Project Phase 6 (CMIP6) models, including the 50-member fifth-generation Canadian Earth System Model single model initial-condition large ensemble (CanESM5_SMILE), to realistically simulate historical interannual precipitation variability trends within 17 regions of the contiguous United States (CONUS). We assess how accurately the CMIP6 simulations align with observational data across annual, summer, and winter periods, focusing on four key hydrometeorological metrics, including interannual precipitation variability, relative interannual precipitation variability (coefficient of variation), annual mean precipitation, and annual wet day frequency. Our findings reveal that CMIP6 ensemble members generally reproduce the spatial patterns of observed trends in annual mean precipitation. In most regions, models agree well with the signs of observed changes in annual mean precipitation, though discrepancies in trend magnitude are evident. Further, observed trends in winter mean precipitation broadly exhibit a spatial pattern similar to that of the observed annual mean. However, analysis of the CanESM5_SMILE shows that trends in precipitation variability may primarily be the result of model-simulated internal variability, suggesting caution in interpreting multi-model single-realization ensemble results. Challenges in accurately simulating interannual precipitation variability underscore the need for ongoing model refinement and validation to enhance climate projections, especially in regions vulnerable to extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗

Orbital hybridisation effects in B2 phase Cr doped Co 2 MnAl

Here we investigate here the magnetic, transport, local structural and electronic properties of Co 2 Mn 1−x Cr x Al (x = 0, 0.05, 0.1 and 0.2). Our results show that all the compounds stabilise in B2 phase and are ferromagnets. The results reveal disorder at the structural and magnetic levels. X-ray absorption near edge structure (XANES) analysis reveal signature of antisite disorder between Mn and Al atoms with equal ratio. The electronic structure calculations suggest enhancement in the half metallicity, localisation of electrons at the Fermi level and an increment in density of states with doping. The combined results of electronic structure calculations and XANES studies suggest transfer of electrons to the Co site. The results of high temperature resistivity measurements suggest the conduction electrons are undergoing transition from delocalisation to weak localisation to activated behaviour with Cr doping. The extended x-ray absorption spectroscopic analysis shows that the local structure around Mn atom is different from the global structure as obtained from the x-ray diffraction results. The behaviour of the edge region is in line with the trend as obtained from the compositional analysis. We observe link between the hybridisation of 3d like states at the Mn, Cr sites with that at the Co site and the transport properties. This could help in understanding the unusual decrement in the lattice parameter with doping. These results reveal the role of local structure in understanding the physical properties of such systems.

36 MATERIALS SCIENCE↗

Large-scale compute-intensive analysis via a combined in-situ and co-scheduling workflow approach, In: SC '15 Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis

Large-scale simulations can produce hundreds of terabytes to petabytes of data, complicating and limiting the efficiency of workflows. Traditionally, outputs are stored on the file system and analyzed in post-processing. With the rapidly increasing size and complexity of simulations, this approach faces an uncertain future. Trending techniques consist of performing the analysis in-situ, utilizing the same resources as the simulation, and/or off-loading subsets of the data to a compute-intensive analysis system. We introduce an analysis framework developed for HACC, a cosmological N-body code, that uses both in-situ and co-scheduling approaches for handling petabyte-scale outputs. We compare different analysis set-ups ranging from purely off-line, to purely in-situ to in-situ/co-scheduling. The analysis routines are implemented using the PISTON/VTK-m framework, allowing a single implementation of an algorithm that simultaneously targets a variety of GPU, multi-core, and many-core architectures.

Computer Science↗

Long term trending of engineering data for the Hubble Space Telescope

A major goal in spacecraft engineering analysis is the detection of component failures before the fact. Trending is the process of monitoring subsystem states to discern unusual behaviors. This involves reducing vast amounts of data about a component or subsystem into a form that helps humans discern underlying patterns and correlations. A long term trending system has been developed for the Hubble Space Telescope. Besides processing the data for 988 distinct telemetry measurements each day, it produces plots of 477 important parameters for the entire 24 hours. Daily updates to the trend files also produce 339 thirty day trend plots each month. The total system combines command procedures to control the execution of the C-based data processing program, user-written FORTRAN routines, and commercial off-the-shelf plotting software. This paper includes a discussion the performance of the trending system and of its limitations.

Cox, Ross M.↗

Analysis to evaluate predictors of fiberboard aging to guide surveillance sampling for the 9975 life extension program

During surveillance of the 9975 shipping package at the Savannah River Site K-Area Complex, several package dimensions are recorded. The analysis described in this report shows that, based on the current data analysis, two of these measurements, Upper Assembly Outer Diameter (UAOD) and Upper Assembly Inside Height (UAIH), do not have statistically significant aging trends regardless of wattage levels. In contrast, this analysis indicates that the measurement of Air Shield Gap (ASGap) does show a significant increase with age. It appears that the increase is greater for high wattage containers, but this result is dominated by two measurements from high-wattage containers. For all three indicators, additional high-wattage, older containers need to be examined before any definitive conclusions can be reached. In addition, the current analysis indicates that ASGap measurements for low and medium wattage containers are increasing slowly over time. To reduce uncertainties and better capture the aging trend for these containers, additional low and medium wattage older containers should also be examined. Based on this analysis, surveillance guidance is to augment surveillance containers resulting from 3013 surveillance with 9975-focused sampling that targets older, high wattage containers and also includes some older, low and medium wattage containers. This focused sampling began in 2015 and will continue in 2016. The UAOD, UAIH and ASGap data are highly variable. It is possible that additional factors such as seasonal variation and packaging site location might reduce variability and be useful for focusing surveillance and predicting aging.

42 ENGINEERING↗

Interband polarized absorption in InP polytypic superlattices

Recent advances in growth techniques have allowed the fabrication of semiconductor nanostructures with mixed wurtzite/zinc-blende crystal phases. Although the optical characterization of these polytypic structures is well reported in the literature, a deeper theoretical understanding of how crystal phase mixing and quantum confinement change the output linear light polarization is still needed. In this paper, we theoretically investigate the mixing effects of wurtzite and zinc-blende phases on the interband absorption and in the degree of light polarization of an InP polytypic superlattice. We use a single 8 × 8 k⋅p Hamiltonian that describes both crystal phases. Quantum confinement is investigated by changing the size of the polytypic unit cell. We also include the optical confinement effect due to the dielectric mismatch between the superlattice and the vaccum and we show it to be necessary to match experimental results. Our calculations for large wurtzite concentrations and small quantum confinement explain the optical trends of recent photoluminescence excitation measurements. Furthermore, we find a high sensitivity to zinc-blende concentrations in the degree of linear polarization. This sensitivity can be reduced by increasing quantum confinement. In conclusion, our theoretical analysis provides an explanation for optical trends in InP polytypic superlattices, and shows that the interplay of crystal phase mixing and quantum confinement is an area worth exploring for light polarization engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long-Term Changes/Trends in Surface Temperature and Precipitation During the Satellite Era (1979-2012)

During the post-1979 period in which the satellite-based precipitation measurements with global coverage are available, global mean surface temperature rapidly increased up to late 1990s, followed by a period of temperature hiatus after about 19981999. Comparing observed surface temperature trends against the simulated ones by the CMIP5 historical experiments especially in the zonal mean context suggests that although the anthropogenic greenhouse-gases (GHG) forcing has played a major role, in addition to the anthropogenic aerosols and various natural forcings, the effects from decadal-to-interdecadal scale internal modes specifically the Pacific Decadal Oscillation(PDO) are also very strong. Evident temperature changes associated with the PDOs phase shift are seen in the Pacific basin, with decadal-scale cooling in the tropical central-eastern Pacific and most of the east basin and concurrent warming in the subtropics of both hemispheres,even though the PDOs net effect on global mean temperature is relatively weak. The Atlantic Multidecadal Oscillation(AMO) also changed its phase in the mid-1990s, and hence its possible impact is estimated and assessed as well.However, comparisons with CMIP5 simulations suggest that the AMO may have not contributed as significantly as the PDO in terms of the changes trends in global surface temperature, even though the data analysis technique used here suggests otherwise. Long-term precipitation changes or trends during the post-1979 period are further shown to have been modulated by the two major factors:anthropogenic GHG and PDO, in addition to the relatively weak effects from aerosols and natural forcings. The spatial patterns of observed precipitation trends in the Pacific,including reductions in the tropical central-eastern Pacific and increases in the tropical western Pacific and along the South Pacific Convergence Zone, manifest the PDOs contributions.Removing the PDO effect from the total precipitation trends makes the spatial structures of precipitation trends more similar to those simulated by CMIP5 historical full forcing experiments particularly in the context of zonal-mean results. This also confirms that in spite of the PDO effect specifically on regional scales, the anthropogenic GHG signals are still discernible in observed precipitation during the time period. Following the increase of GHG, precipitation tends to increase roughly along the climatological ITCZ and decrease south of the equator and in the subtropics of both hemispheres.

GPCP↗

Analysis of Platooning Trucks to Better Understand Dynamic Air Flow

Track testing has shown significant fuel-savings promise for truck platooning strategies but also raised unexpected questions about close following and long-distance following scenarios that could significantly impact savings realized in real-world conditions. The 2017 track test collaboration among NREL, Lawrence Berkeley National Laboratory, NRC Canada, Transport Canada, and others included onboard instrumentation to help the team gain a deeper understanding of the dynamic interaction between multiple vehicles. NREL's approach includes detailed data analysis for additional onboard sensors and J1939 CAN bus data from 2017 track test to investigate following truck air flow and turbulence changes to explain reduced savings at close following distances for the last vehicle in a platoon, define engine-cooling impacts of platooning position in different formations due to reduction of ram air through front grill and generate an understanding of a true in-use "baseline" with other vehicles on the highway. Initial data analysis indicates many of the data trends in wind angle, wind speed, and temperatures show a change in pattern for the closer following distances where fuel savings decrease for the following vehicles was also documented. This is encouraging in that the planned further analysis may yield the desired insights into the cause of the reduced savings. Once analyzed, light-duty vehicle and dynamic scenarios will help us refine the sensitivity of findings from the standard platooning scenarios.

30 DIRECT ENERGY CONVERSION↗