Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Optimization of the Growth of the Van der Waals Materials Bi 2 Se 3 and (Bi 0.5 In 0.5 ) 2 Se 3 by Molecular Beam Epitaxy

The naturally existing chalcogenide Bi 2 Se 3 is topologically nontrivial due to the band inversion caused by the strong spin-orbit coupling inside the bulk of the material. Here, the surface states are spin polarized, protected by the time-inversion symmetry, and thus robust to the scattering caused by nonmagnetic defects. A high-purity topological insulator thin film can be easily grown via molecular beam epitaxy (MBE) on various substrates to enable novel electronics, optics, and spintronics applications. However, the unique surface state properties have historically been limited by the film quality, which is evaluated by crystallinity, surface morphology, and transport data. Here we propose and investigate different MBE growth strategies to improve the quality of Bi 2 Se 3 thin films grown by MBE. Based on the surface passivation status, we have classified the substrates into two categories, self-passivated or unpassivated, and determine the optimal growth mechanisms on the representative sapphire and GaAs, respectively. For Bi 2 Se 3 on GaAs, the surface passivation status determines the dominant growth mechanism. In the end, growths of the topological trivial insulator (Bi 0.5 In 0.5 ) 2 Se 3 (BIS) on GaAs are investigated following the protocols proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reactivity of a Zirconia–Copper Inverse Catalyst for CO 2 Hydrogenation

Copper–zirconia catalysts have been shown to be effective for methanol synthesis via CO 2 hydrogenation, yet the active phases and reaction mechanism remain uncertain. Here, an inverse model catalyst ZrO 2 /CuO 2 /Cu(111) was prepared by mass-selected ion deposition and tested for CO 2 hydrogenation under near-ambient pressure (AP) reaction conditions by using X-ray photoelectron spectroscopy (NAP-XPS) and infrared reflection–absorption spectroscopy (NAP-IRAS). The spatial resolution afforded by the small entrance cone of the AP-XPS spectrometer was used to resolve regions of the surface with and without Zr deposition. Carbon 1s core level spectra of the ZrO 2 /Cu 2 O/Cu(111) regions of the surface under 500 mTorr of CO 2 + H 2 (1:3 ratio) show evidence for reaction intermediates including carbonate (CO 3 *), formate (HCOO*), and H x CO* species, with methoxy having the highest surface concentration at 500–600 K. These intermediates are confirmed by IRAS vibrational spectra. In regions of the surface without Zr, the Cu 2 O/Cu(111) is reduced to metallic Cu, and the surface intermediates are different and are present at much lower concentrations. The observed surface intermediates and their temperature dependence suggest a mechanism in which CO 2 is adsorbed on zirconia as carbonate (CO 3 *) and then converted to HCOO* and H x CO* hydrogenated intermediates that ultimately lead to methoxy (CH 3 O*), the final surface-bound precursor for methanol. Overall, the results clearly demonstrate the promotional effects of small ZrO 2 particles for enhancing the reactivity of Cu surfaces for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Superionic Surface Li-Ion Transport in Carbonaceous Materials

Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. Here, in this study, we have discovered an ultrafast Li-ion transport phenomenon on the surface of carbonaceous materials with limited reversible Li insertion capacity and high surface area. An ionic conductivity of 18.1 mS cm –1 at room temperature is observed in lithiated Ketjen black (KB), far exceeding those of most solid-state ion conductors. Theoretical calculations reveal low diffusion barriers for the surface Li species. As a result, lithiated KB functions effectively as an interlayer between Li and solid-state electrolytes (SSEs) to mitigate dendrite growth. Further, lithiated KB acts as a high-performance mixed ionic–electronic conductor and replaces solid electrolytes to enhance graphite anode performance, demonstrating full utilization with ∼85% capacity retention over 300 cycles. The discovery of this surface-mediated ultrafast Li-ion transport mechanism provides new directions for the design of solid-state ion conductors and solid-state batteries.

Li metal batteries↗
DOE OSTI2022

Elucidating CO Oxidation Pathways on Rh Atoms and Clusters on the “29” Cu 2 O/Cu(111) Surface

We report single-atom catalysts have attracted a great deal of attention due to their distinct reactivity and potential for cost savings. However, despite the wealth of literature in recent years, identifying the exact nature of the active sites and associated reaction mechanisms remains challenging in many cases. Herein, we take a surface science approach to understand how Rh single atoms and small clusters behave on the thin film “29” Cu 2 O grown on Cu(111). We find that in contrast to Pt, which is present solely as single atoms on the “29” Cu 2 O surface, Rh atoms and clusters coexist and each enable low-temperature CO oxidation, but via different pathways. Specifically, the single Rh atoms produce CO 2 at 444 K via a Mars van Krevelen mechanism whereas the Rh clusters can also dissociate CO, as demonstrated via isotope labeling, and liberate CO 2 at 313 K. Density functional theory (DFT) calculations quantify the energetics of these different pathways and demonstrate that only extended Rh is capable of CO dissociation. Low-temperature scanning tunneling microscopy (STM) reveals that unlike Pt atoms on the same surface, which stay atomically dispersed, the distribution of Rh structures is dependent on pretreatment conditions. DFT calculations reveal the greater tendency of Rh atoms to cluster than Pt, and STM image simulations confirm the active sites. Ambient pressure X-ray photoelectron spectroscopy studies on the same single crystal model systems demonstrate that 1% of a monolayer of Rh on the “29” Cu 2 O thin film significantly accelerates its reduction by CO at 400 K, thus confirming the ultrahigh vacuum surface science findings. Together, these results illustrate how well-defined single crystal experiments are useful in building structure–function relationships that elucidate the reactivity of different ensemble sizes with a level of detail beyond what is possible with high surface area catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Polydopamine Surface Coating Synergizes the Antimicrobial Activity of Silver Nanoparticles

Metal nanoparticles, especially silver nanoparticles (AgNPs), have drawn increasing attention for antimicrobial applications. Most studies have emphasized on the correlations between the antibacterial potency of AgNPs and the kinetics of metallic to ionic Ag conversion, while other antimicrobial mechanisms have been underestimated. In this work, we focused on the surface effects of polydopamine (PDA) coating on the antimicrobial activity of AgNPs. A method of fast deposition of PDA was used to synthesize the PDA-AgNPs with controllable coating thickness ranging from 3 to 25 nm. The antimicrobial activities of the PDA-AgNPs were analyzed by fluorescence-based growth curve assays on Escherichia coli. The results indicated that the PDA-AgNPs exhibited significantly higher antibacterial activities than poly(vinylpyrrolidone)-passivated AgNPs (PVP-AgNPs) and PDA themselves. It was found that the PDA coating synergized with the AgNPs to prominently enhance the potency of the PDA-AgNPs against bacteria. Additionally, the analysis of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy elucidated that the synergistic effects could be originated from the interaction/coordination between Ag and catechol group on the PDA coating. The synergistic effects led to increased generation of reactive oxygen species and the consequent bacterial damage. Overall, these findings demonstrated the importance of the surface effects on the antimicrobial properties of AgNPs. The underlying molecular mechanisms have shined light on the future development of more potent metal nanoparticle-based antimicrobial agents.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stress engineering for crack and dendrite prevention in solid electrolytes via ion implantation

Solid-state batteries represent a promising technology that offers safer and more densely packed energy storage. A primary cause of failure in solid-state cells is the penetration of metal dendrites through the solid electrolyte. Here, we report that fluorine-ion implantation can enhance the mechanical resistance of solid electrolyte Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 to dendrite propagation by inducing residual compressive stress in the subsurface of the electrolyte. Ion implantation modifies subsurface residual stress and also alters the electrolyte’s surface, resulting in multifunctional enhancement. The combined chemical and mechanical effects of ion implantation enable reversible lithium metal stripping and plating at elevated current densities while enhancing air stability and mitigating the formation of a harmful carbonate layer at the surface. This study provides new insights into a scalable dendrite-suppression strategy for designing solid-state batteries suitable for cycling at room temperature and low stack pressures.

25 ENERGY STORAGE↗
DOE OSTI2026

A High-Fidelity Molecular Model of the Cu(111) Repeating Unit

Dynamic processes at surfaces are central to heterogeneous catalysis, but their atomistic mechanism(s) can prove difficult to elucidate due to variations in material structure and the corresponding impact on reactivity. Moreover, disparities between reaction conditions and those employed for spectroscopic characterization at surfaces can inhibit detailed understanding of catalysis-relevant chemistries. Herein, we substantiate the so-called “cluster-surface” analogy by leveraging a low-valent tricopper architecture ( 1 ) as a model system for small molecule activation at Cu(111). Two reaction classes are explored: the adsorption of carbon monoxide (CO) and the dissociative adsorption of dihydrogen (H 2 ). These processes serve as an ideal testbed to compare the reactivity of a molecular cluster ( 1 ) to that of a heterogeneous surface, as both reactions have empirical data from measurements performed on crystalline Cu(111). Cluster 1 reversibly binds CO. Variable temperature NMR analysis with 13 CO reveals a favorable enthalpy but large negative entropy (−5.1 kcal × mol –1 and −22.9 cal × mol –1 × K –1 , respectively) for CO binding, affording a process that is marginally endergonic at room temperature (ΔG ads (298.15 K) = 1.7 ± 0.5 kcal × mol –1 ). Similarly, analogous to a Cu(111) surface, 1 is shown to oxidatively add (chemisorb) H 2 . Kinetic parameters were determined for this process and the activation enthalpy (8.4 ± 0.5 kcal × mol –1 ) closely mirrors that established for H 2 binding at the Cu(111) facet (6.0 to 12.4 kcal × mol –1 ). Together, these results showcase that a trinuclear cluster can reproduce the small molecule binding and activation energetics of a bulk crystalline surface, setting the stage for studying less-defined surface processes in an atomically precise molecular setting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Layer‐by‐Layer Engineered All‐Liquid Microfluidic Chips for Enzyme Immobilization

Abstract Enzyme immobilization in the confines of microfluidic chips, that promote enzyme activity and stability, has become a powerful strategy to enhance biocatalysis and biomass conversion. Here, based on a newly developed all‐liquid microfluidic chip, fabricated by the interfacial assembly of nanoparticle surfactants (NPSs) in a biphasic system, a layer‐by‐layer assembly strategy to generate polysaccharide multilayers on the surface of a microchannel, greatly enhancing the mechanical properties of the microchannel and offering a biocompatible microenvironment for enzyme immobilization, is presented. Using horseradish peroxidase and glucose oxidase as model enzymes, all‐liquid microfluidic enzymatic and cascade reactors have been constructed and the crucial role of polysaccharide multilayers on enhancing the enzyme loading and catalytic efficiency is demonstrated.

Liu, Tan↗
DOE OSTI2024

Beyond Conventional Charge Density Wave for Strongly Enhanced 2D Superconductivity in 1H‐TaS 2 Superlattices

Noncentrosymmetric transition metal dichalcogenide (TMD) monolayers offer a fertile platform for exploring unconventional Ising superconductivity (SC) and charge density waves (CDWs). However, the vulnerability of isolated monolayers to structural disorder and environmental oxidation often degrade their electronic coherence. Herein, an alternative approach is reported for fabricating stable and intrinsic monolayers of 1H-TaS2 sandwiched between SnS blocks in a (SnS) 1.15 TaS 2 van der Waals (vdW) superlattice. The SnS block layers not only decouple individual 1H-TaS 2 sublayers to endow them with monolayer-like electronic characteristics, but also protect the 1H-TaS 2 layers from electronic degradation. The results reveal the characteristic 3 × 3 CDW order in 1H-TaS 2 sublayers associated with electronic rearrangement in the low-lying sulfur p band, which uncovers a previously undiscovered CDW mechanism rather than the conventional Fermi surface-related framework. Additionally, the (SnS) 1.15 TaS 2 superlattice exhibits a strongly enhanced Ising-like SC with a layer-independent T c of ≈3.0 K, comparable to that of the isolated monolayer 1H-TaS 2 sample, presumably attributed to their monolayer-like characteristics and retained Fermi states. These results provide new insights into the long-debated CDW order and enhanced SC of monolayer 1H-TaS 2 , establishing bulk vdW superlattices as promising platforms for investigating exotic collective quantum phases in the 2D limit.

2D superconductivity↗
DOE OSTI2020

Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices.

Wang, Xiaowei↗
DOE OSTI2023

Understanding the diversity of the West African monsoon system change projected by CORDEX-CORE regional climate models

Understanding real uncertainties in projections is needed to support actions of decision and policy makers. In this study, two state-of-the-art regional climate models with ~ 25 km horizontal resolution forced with three different global climate models are employed to investigate the response of the West African Monsoon (WAM) system under the low (RCP2.6) and high (RCP8.5) emission scenarios. We make a step towards assessing the plausibility of rainfall change (ΔPr) patterns based on the models’ ability to realistically represent the WAM system under the historical period, and by analyzing changes in mechanisms associated with ΔPr patterns. Under global warming, experiments exhibit diverse ΔPr patterns underpinned by different combinations of mechanisms operating simultaneously. A dipole-like surface pressure change between the Sahara Desert and the Guinea Coast appears to be a differentiating factor between experiments featuring homogeneous or increased rainfall over all or a part of the Sahel from those simulating heterogeneous or reduced rainfall over the same domain. This dipole acts by modulating the amount and the extent of deepening of the monsoon flux inland, and hence the latitudinal positioning of the monsoon convective system. This process contributes to moistening the whole or central and eastern Sahel in some experiments while drying the Guinea Coast. The West African Westerly Jet (WAWJ) is responsible for strengthening and moistening the western Sahel under RCP2.6. However, the WAMJ becomes much stronger under RCP8.5 and may have contributed to the drying of the western Sahel by shifting moisture eastwards in addition to the mid-tropospheric moisture divergence through enhanced African Easterly Jet. Furthermore, for experiments expecting wetting (drying) of the Sahel, the strengthening (weakening) of the tropical easterly jet may have contributed to the projected intensification (reduction) of WAM rainfall by favoring uplift (downlift) above 600 hPa. It also emerges that the ΔPr patterns from REMO2015 experiments are likely more plausible than those from RegCM4-v7. The impacts of strong warming on the regional hydrological cycle are further investigated and we found that changes gradually intensify with the level of radiative forcing, highlighting the importance of mitigating warming as recommended by the Paris agreement.

CORDEX-CORE↗
DOE OSTI2025

Hierarchical domain structures in buckled ferroelectric free sheets

Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO3 sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO3 sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Extracting single fiber transverse and shear moduli from off-axis misalignment fiber tensile testing

Small diameter (<100 μm) fibers (e.g. carbon fibers, Kevlar, and fiberglass) and wires (e.g. ultrafine copper and aluminum wires) are frequently used in many different engineering applications, such as for light weighting structures, electromagnetic shielding for aircraft/infrastructure/EVs, vibration damping, biological sensors, aerospace electrical devices, and electric windings just to name a few. Due to the manufacturing process, the fibers and wires are pulled and stretched to produce a preferential alignment. Therefore, thin fibers and wires typically display different properties along the length of the fiber as opposed to their cross section and many fibers/wires are considered transversely isotropic. The axial properties of fibers/wires can be ascertained via tensile testing of single-filaments or fiber tows, but the radial properties require much more effort to measure. Knowing these properties is important for the accurate prediction of micromechanical models and manipulation of fibers during micromanufacturing. In this paper, a new technique was developed to determine the transverse/shear moduli and strength of a material by conducting tensile tests of the material at increasing misalignment angles from the tensile axis. Due to the transversely isotropic nature of the material, the transverse/shear moduli and strength influence the experimental results recorded by the test machine to different degrees based on the amount of misalignment in the test setup. An equation was derived to determine the influence of each of the material properties based on the misalignment angle by manipulating the stiffness matrix for transversely isotropic materials using the transformation matrices. Then, curve fitted coefficients were used to identify the material properties. Here, the strengths were similarly determined by curve fitting an off-axis Tsai-Hill failure criteria to determine the influence of transverse, shear, and tensile strengths based on the complex loading condition provided by the off-axis tensile test. Zoltek Panex 35 carbon fibers were used to demonstrate this new technique and the determined properties were then compared to those obtained from nanoindentation and from literature. Fracture surfaces provide insight into the different failure mechanisms at various misalignment angles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Li + Diffusion in Amorphous and Crystalline Al 2 O 3 for Battery Electrode Coatings

Al 2 O 3 is often applied protectively to lithium-ion battery anode and cathode materials to inhibit surface degradation, suppress dendrite formation, and relieve mechanical stresses. Given the very high intrinsic band gap and diffusion barrier of the material, the mechanism that allows Li diffusion through these coatings is not well understood, and widely varying laboratory results indicate that there may be dependencies on morphology and stoichiometry. Using nudged elastic band calculations and ab initio molecular dynamics, we perform a systematic investigation across Al 2 O 3 structures, both crystalline and amorphous, and at various concentrations of Li + to uncover the optimal parameters for maximally diffusive coatings. We find a correlation between the low proximity of Li + to Al 3+ and the low Li + migration barrier. Although barriers are the lowest in the highly diffusive one-dimensional channels of crystalline θ-Al 2 O 3 , the system is structurally delicate and subject to detrimental distortion as the Li + content is increased. The α-Al 2 O 3 lattice is, conversely, highly stable against distortion at all Li + concentrations but disadvantageous for Li + migration. In amorphous systems, unscreened Li + –Li + Coulomb repulsion and pre-emptive occupation of “trapping sites” combine to lower the energy barriers as a function of increasing concentration. One of our most important findings is that Al-deficient materials can sharply increase Li + movement, and we predict that an amorphous material with a combination of high Li + concentration and Al deficiency would enable highly Li + -conductive protective coatings for electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Resolving Chemical and Spatial Heterogeneities at Complex Electrochemical Interfaces in Li-Ion Batteries

The high specific capacities of Ni-rich transition metal oxides have garnered immense interest for improving the energy density of Li-ion batteries (LIBs). Despite the potential of these materials, Ni-rich cathodes suffer from interfacial instabilities that lead to crystallographic rearrangement of the active material surface as well as the formation of a cathode electrolyte interphase (CEI) layer on the composite during electrochemical cycling. While changes in crystallographic structure can be detected with diffraction-based methods, probing the chemistry of the disordered, heterogeneous CEI layer is challenging. In this work, we use a combination of ex situ solid-state nuclear magnetic resonance (SSNMR) spectroscopy and X-ray photoemission electron microscopy (XPEEM) to provide chemical and spatial information, on the nanometer length scale, on the CEI deposited on LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) composite cathode films. XPEEM elemental maps offer insight into the lateral arrangement of the electrolyte decomposition products that comprise the CEI and paramagnetic interactions (assessed with electron paramagnetic resonance (EPR) and relaxation measurements) in 13 C SSNMR provide information on the radial arrangement of the CEI from the NMC811 particles outward. Using this approach, here we find that LiF, Li 2 CO 3 , and carboxy-containing structures are directly appended to NMC811 active particles, whereas soluble species detected during in situ 1 H and 19 F solution NMR experiments (e.g., alkyl carbonates, HF, and vinyl compounds) are randomly deposited on the composite surface. We show that the combined approach of ex situ SSNMR and XPEEM, in conjunction with in situ solution NMR, allows spatially-resolved, molecular-level characterization of paramagnetic surfaces and new insights into electrolyte oxidation mechanisms in porous electrode films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic–Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl 4 and H 2 O to create P3HT-TiO x organic–inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiO x VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiO x hybrids degrade methylene blue dye molecules. The P3HT-TiO x hybrids are 4.6× more photocatalytically active than either the P3HT or TiO 2 individually or when sequentially deposited (e.g., P3HT on TiO 2 ). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl 4 + H 2 O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiO x clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiO x as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiO x catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic–inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Poison or Promoter? Investigating the Dual-Role of Carbon Monoxide in Pincer-Iridium-Based Alkane Dehydrogenation Systems via Operando Diffuse Reflectance Infrared Fourier Transform Spectroscopy

Pincer-ligated iridium complexes of the form [( R 4 PCP)IrL] ( R 4 PCP = κ 3 -C 6 H 3 -2,6-(XPR 2 ) 2 ; X = CH 2 , O; R = tBu, iPr) have previously been shown competent for acceptorless alkane dehydrogenation when supported on silica. It was observed by postcatalysis solid-state NMR that silica-tethered [(≡SiO- tBu 4 POCOP)Ir(C 2 H 4 )] (3-C 2 H 4 ) was converted fully to [(≡SiO- tBu 4 POCOP)Ir(CO)] (3-CO) at 300 °C. In this work, the characterization of species under dehydrogenation reaction conditions far from equilibrium between butane and butenes (approach to equilibrium Q/K eq = 0.3 at 300 °C) is performed with operando Diffuse Reflectance Infrared Fourier–Transform Spectroscopy (DRIFTS) to show the kinetics of species conversion from 3-C 2 H 4 to 3-CO. It is further found that [(≡SiO- tBu 4 POCOP)IrHCl] (3-HCl), a species considered to be a precatalyst for alkane dehydrogenation, is also fully converted to 3-CO. Here, a mechanism of decomposition is proposed that implicates surface silanol groups, while carbon monoxide acts as a “stabilizer” for the catalyst by promoting their reductive elimination and maintaining the complex in the I oxidation state.

02 PETROLEUM↗
DOE OSTI2025

Anion Exchange Membrane Water Electrolysis Using a Catalyst-Coated Membrane Cathode

A catalyst-coated membrane (CCM) approach to electrode fabrication for high pH water electrolysis offers enhanced interfacial contact between the catalyst layer and the membrane surface in comparison to the catalyst-coated substrate (CCS) electrode configuration. The CCM facilitates enhanced ionic and water transport between the cathode and the anion exchange membrane (AEM). This advantage is particularly significant with AEM water electrolysis (compared to proton exchange membrane water electrolysis) because the cathode typically operates under dry conditions and relies solely on diffusive water transport across the AEM from the liquid-fed anode. This study presents a direct performance comparison between CCS and CCM cathode configurations using identical hydrogen evolution reaction (HER) catalysts and other components. The use of a pseudo-reference electrode integrated into the membrane electrode assembly enabled detailed analysis of the CCM cathode polarization behavior. Surface characterization provided insight into the degradation mechanisms associated with the CCM configuration. Optimization of the cathode ionomer cross-link density improved both the cathode polarization performance and the electrolysis device durability. Further optimization of the HER catalyst loading in the CCM cathode resulted in additional gains in the electrolysis efficiency. Collectively, these findings offer valuable guidance for the design and fabrication of high-performance, durable AEM electrolysis CCMs.

Water electrolysis↗