Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optical recognition of constructs using hyperspectral imaging and detection (ORCHID)

Abstract Challenges to deep sample imaging have necessitated the development of special techniques such as spatially offset optical spectroscopy to collect signals that have travelled through several layers of tissue. However, these techniques provide only spectral information in one dimension (i.e., depth). Here, we describe a general and practical method, referred to as Optical Recognition of Constructs Using Hyperspectral Imaging and Detection (ORCHID). The sensing strategy integrates (1) the spatial offset detection concept by computationally binning 2D optical data associated with digital offsets based on selected radial pixel distances from the excitation source; (2) hyperspectral imaging using tunable filter; and (3) digital image binding and collation. ORCHID is a versatile modality that is designed to collect optical signals deep inside samples across three spatial (X, Y, Z) as well as spectral dimensions. The ORCHID method is applicable to various optical techniques that exhibit narrow-band structures, from Raman scattering to quantum dot luminescence. Samples containing surface-enhanced Raman scattering (SERS)-active gold nanostar probes and quantum dots embedded in gel were used to show a proof of principle for the ORCHID concept. The resulting hyperspectral data cube is shown to spatially locate target emitting nanoparticle volumes and provide spectral information for in-depth 3D imaging.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Dual‐Gradient Construction on Li‐Rich Cathodes for High Stability Lithium Battery

Abstract The practical applications of high‐energy Li‐rich layered oxides (LLOs) have been hindered by the severe performance degradation including voltage decay and capacity fading. The gradient construction toward high‐activity interior and high‐stability exterior, typically realized by gradually changed transition metal (TM) gradient in LLOs, can alleviate the performance degradation to certain degrees. In this study, a gradient design of Al/Mg dopants is demonstrated for the TM‐gradient LLOs to further harmonize the high‐activity interior and high‐stability exterior, thereby forming the dual (TM and doping) gradient. As a result, superior capacity retention of 86% and a minor voltage decay of 0.54 mV cycle −1 are achieved at 1 C after 300 cycles. The improved electrochemical stability of the dual‐gradient LLO is attributed to the enhanced surface stability and suppressed bulk structure degeneration of LLOs upon electrochemical cycling. The dual‐gradient design serves as an important approach to fabricate high‐performance bulk LLOs toward applications.

Wu, Tianhao↗
DOE OSTI2020

Technology Development for Under Tank Inspection of Double-Shell Tanks - 20045

The Department of Energy (DOE) Office of River Protection (DOE-ORP) is responsible for management and cleanup of the tank farms located at the Hanford Site. Nuclear waste at Hanford is stored in 149 single-shell tanks (SSTs) and 27 double-shell tanks (DSTs). The vast majority of the liquid radioactive waste is stored in the DSTs. The 27 DSTs, located in six tank farms, were constructed from 1967 to 1986 and, compared to the SSTs, provide greatly improved protection from leakage and better accessibility for inspection. The DSTs and ancillary equipment are expected to exceed their design life before their waste is removed and sent to the Waste Treatment and Immobilization Plant. The DST Integrity Project (DSTIP) must ensure that the DST system can meet the River Protection Project mission goals. This paper provides a programmatic overview of the DSTIP with a focus on development of under-tank inspection technologies. Currently, two categories of nondestructive examination (NDE) techniques for DSTs are implemented on the Hanford site: (1) surface (SNDE) and (2) volumetric (VNDE). Further discussion on current inspection techniques is provided in this paper. The technology development approach for advanced VNDE techniques will also be generally discussed as a precursor for another more detailed WM2020 paper and presentation by PNNL. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Effect of grain dissolution on sloping ground

The static and dynamic stability of natural or constructed slopes can be affected by dissolution or dissolution-like phenomena. Their underlying mechanisms, however, remain unclear. New experimental results and discrete element simulations provide particle-level and macroscale information on the consequences of mineral dissolution on slope behavior. At the microscale, load-carrying grain arches develop around dissolving particles, the porosity increases, and contact force chains evolve to form a honeycomb topology. At the macroscale, while vertical settlements are the prevailing deformation pattern, lateral granular movements that create mass wasting are prominent in sloping ground, even under the quasi-static granular loss. Horizontal grain displacement is maximum at the surface and decreases linearly with the distance from the slope surface to become zero at the bottom boundaries, much like vertical granular displacement along the depth. Sediments with smaller friction angles and steeper slopes experience greater displacement, both vertically and horizontally. Slopes become flatter after dissolution, with the reduction in slope angle directly related to the loss in ground elevation, ΔH/H o . Yet, because of the porous fabric that results from dissolution, vertical shortening is less than the upper bound, estimated from the loss in the solid mass fraction, ΔH/H o ≈SF. Under water-saturated conditions, the post-dissolution fabric may lead to sudden undrained shear and slope slide.

42 ENGINEERING↗
DOE OSTI2022

Crystallography of hyperbolic lattices

Hyperbolic lattices are a revolutionary platform for tabletop simulations of holography and quantum physics in curved space and facilitate efficient quantum error correcting codes. Their underlying geometry is non-Euclidean, and the absence of Bloch's theorem precludes the straightforward application of the often indispensable energy band theory to study model Hamiltonians on hyperbolic lattices. Motivated by recent insights into hyperbolic band theory, we initiate a crystallography of hyperbolic lattices. Here we show that many hyperbolic lattices feature a hidden crystal structure characterized by unit cells, hyperbolic Bravais lattices, and associated symmetry groups. Using the mathematical framework of higher-genus Riemann surfaces and Fuchsian groups, we derive a list of example hyperbolic {p,q} lattices and their hyperbolic Bravais lattices, including five infinite families and several graphs relevant for experiments in circuit quantum electrodynamics and topolectrical circuits. This dramatically simplifies the computation of energy spectra of tight-binding Hamiltonians on hyperbolic lattices, from exact diagonalization on the graph to solving a finite set of equations in terms of irreducible representations. The significance of this achievement needs to be compared to the all-important role played by conventional Euclidean crystallography in the study of solids. We exemplify the high potential of this approach by constructing and diagonalizing finite-dimensional Bloch wave Hamiltonians.

2-dimensional systems↗
DOE OSTI2024

Phase diagram of the three-dimensional subsystem toric code

Subsystem quantum error-correcting codes typically involve measuring a sequence of noncommuting parity check operators. They can sometimes exhibit greater fault tolerance than conventional codes, which use commuting checks. However, unlike subspace codes, it is unclear if subsystem codes—in particular their advantages—can be understood in terms of ground-state properties of a physical Hamiltonian. In this paper, we address this question for the three-dimensional subsystem toric code (3D STC), as recently constructed by Kubica and Vasmer [], which exhibits single-shot error correction. Motivated by a conjectured relation between single-shot properties and thermal stability, we study the zero- and finite-temperature phases of an associated noncommuting Hamiltonian. By mapping the Hamiltonian model to a pair of 3D Z 2 gauge theories coupled by a kinetic constraint, we find various phases at zero temperature, all separated by first-order transitions: There are 3D toric code-like phases with deconfined point-like excitations in the bulk, and there are phases with a confined bulk supporting a 2D toric code on the surface when appropriate boundary conditions are chosen. The latter is similar to the surface topological order present in 3D STC. However, the similarities between the single-shot correction in 3D STC and the confined phases are only partial: they share the same sets of degrees of freedom, but they are governed by different dynamical rules. Instead, we argue that the process of single-shot error correction can more suitably be associated with a path (rather than a point) in the zero-temperature phase diagram, a perspective, which inspires alternative measurement sequences enabling single-shot error correction. Moreover, since none of the above-mentioned phases survives at nonzero temperature, the single-shot error-correction property of the code does not imply thermal stability of the associated Hamiltonian phase. Published by the American Physical Society 2024

Li, Yaodong (ORCID:0000000337421944)↗
DOE OSTI2021

Root lateral interactions drive water uptake patterns under water limitation

The plasticity of root water uptake determines the maintenance of transpiration during periods of water limitation and drought. However, the mechanistic basis of plant water uptake, as well as the implications of water uptake strategies at the individual and ecosystem scale remain elusive. We model three-dimensional root water uptake under variably saturated conditions for a one-hectare temperate forest plot for a growing season with a pronounced mid-season dry period. Variations in root architecture, hydraulic properties, and degree of lateral interaction between root systems produce divergent local responses to water limitation and provide insights on individual and community response to meteorological conditions. Results demonstrate the plasticity of ecosystem-scale responses to surface drying, where interacting roots shift regions of active uptake to deeper soil layers with less abundant root biomass. These shifts, a product of both root system and soil hydraulic properties, illustrate intimate links between root and soil hydraulics in determining plant water sourcing. Furthermore, we demonstrate that root lateral interactions are beneficial at the ecosystem-scale, even when trees compete for water. Specifically, a more spatially extensive root system facilitates access to a larger soil water reservoir, often ameliorating water limitation and reducing sharp water potential gradients. While the reduction of water stress is a benefit, it can be offset by increased root construction and maintenance costs associated with the larger rooting system. A plausible “viability” region of root communal co-existence is therefore implied where competitive pressures and root production costs are balanced by a potential water benefit.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Practical guide to understanding goodness-of-fit metrics used in chemical state modeling of x-ray photoelectron spectroscopy data by synthetic line shapes using nylon as an example

Chemical state analysis of a sample surface through fitting bell-shaped curves to x-ray photoelectron spectroscopic polymer data is reviewed using nylon to introduce and discuss aspects of data analysis. Different strategies for modeling chemistry in nylon spectra are presented and in so doing, a case is made to include in published science the design logic and implementation in terms of line shapes and optimization parameter constraints between components in a peak model. Imperfections in line shape relative to the true shape for photoemission lines, when compensated for using constraints to optimization parameters, are shown to provide chemical state information about a sample that justify, for peak models constructed with these limitations, metrics for goodness-of-fit different from those expected for pulse-counted data.

Materials Science↗
DOE OSTI2025

Magnetosphere Evolution and Precursor-driven Electromagnetic Signals in Merging Binary Neutron Stars

We detail new force-free simulations to investigate magnetosphere evolution and precursor electromagnetic (EM) signals from binary neutron stars. Our simulations fully follow a representative inspiral motion, capturing the intricate magnetospheric dynamics and their impact on EM outflows. We explore a range of stellar magnetic moment orientations and relative strengths, finding that the magnetospheres and Poynting flux evolution are strongly configuration dependent. The Poynting flux exhibits pulsations at twice the orbital frequency, 2Ω, and is highly anisotropic, following a power-law dependence on orbital frequency. The index ranges from 1 to 6, shaped by the intricate dynamics of the magnetospheres. Furthermore, we present the first computation of (1) the EM forces acting on the star surfaces, revealing the presence of torques that, for highly magnetized stars, could influence the orbital dynamics or break the crust; (2) the high-energy emission signals from these systems by adopting the established isolated pulsar theory. Assuming curvature radiation in the radiation-reaction limit, we find that photons could reach TeV–PeV energies in the last ∼ms for magnetic field strengths 10 10 –10 15 G. However, our analysis of single photon magnetic pair production suggests that these photons are unlikely to escape, with the MeV band emerging as a promising observational window for precursor high-energy emission. In this framework, we construct high-energy emission skymaps and light curves, exploring observational implications. Finally, we propose potential precursor radio emission and delayed afterglow echoes from magnetized outflows, which may contribute to late-time rebrightening in short gamma-ray bursts or to orphan afterglows.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Construction of Cryogen-Free 4.3T Superconducting Wiggler for NSLS-II Ring

With the 3 GeV electron beam energy for the National Synchrotron Light Source II (NSLS-II) ring, only superconducting wigglers (SCW) producing greater than 4T peak field can cover the photon energy range of 20 keV and 200 keV with sufficient number of photons. The High energy Engineering X-ray (HEX) Diffraction beamline, which is primarily funded by the New York State Energy Research and Development Authority (NYSERDA) and NSLS-II, will be equipped with a 1.2m-long SCW with 70 mm period length and 4.3 T on-axis field. This SCW is free from the use of liquid Helium and is cooled only with cryo-coolers. The Electron Beam Chamber (EBC) with vertical aperture of 8 mm is made from 316LN stainless steel and copper plating is applied both surface and +-12.5mm wide from the center in the inner surface. The expected heat load from the electron beam of the NSLS-II ring is estimated to be 10 W/m. Here, we describe the design principles and engineering challenges for the device.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fracture-based shape optimization built upon the topological derivative

In Silva et al. (2011) and Alidoost et al. (2020), the authors developed an approximation of the energy release rate field associated with a small edge or surface crack at any boundary location and with any orientation using the topological derivative. The approximation is computationally attractive because it requires only a single analysis on the non-cracked domain in contrast with conventional boundary-element and finite-element-based methods, which require a separate and costlier analysis for each crack length-location-orientation combination. Here, a shape optimization scheme for fracture-resistant structures is developed using the energy release rate approximation. In the gradient-based optimization scheme, the domain and its boundary are defined implicitly using level-set functions. The level-set functions of arbitrary geometries are constructed using Boolean operations from the level-set functions of simple primitives. This geometrical representation has the dual advantage of (i) allowing shapes to intersect and/or separate during the optimization and (ii) simplifying the computation of the shape sensitivities.

42 ENGINEERING↗
DOE OSTI2022

Wavefront preserving X-ray optics for Synchrotron and Free Electron Laser photon beam transport systems

We report in the last two decades, after the first light from the new Free Electron Lasers, either in the UV (FLASH and FERMI@Elettra) or X-ray (LCLS and SACLA), more and more new diffraction limited sources have been either constructed or planned. Third generation storage rings are upgraded to provide a more collimated, brighter, and coherent light for the next generation experimental techniques. X-ray optics are the bridge between the light sources and the experimental stations. They are the key to the success of advanced experiments but also the potential bottleneck preventing the exploitation of the full characteristics of the source. The beam degradation originated by any mirror defect (either from mirror polishing or from contamination) is amplified with a coherent source. Delivering diffraction-limited spots, including the option for variable spot sizes in and out of focus, requires the control of the surface of the optics at the 1 nm rms level, if not better. At LCLS, only very recently an almost perfectly uniform beam out of focus has been obtained in the hard X-rays. It has been obtained after two 1-m long mirrors with 0.5 nm rms shape precision (after installation). Those mirrors were not readily available just a decade ago. But, thanks to the pioneering work performed at the Osaka University, those optics are now commercially available with arbitrary tangential profiles. This new generation of mirrors permits achieving unprecedented results. However, they do not remove all road blocks to a perfect photon transport system. Instead, they highlighted the critical importance of mirror mounting, handling of the thermal deformation, and the need of advanced diagnostics to properly exploit all the new potentiality of these optics. Besides the need of “perfect” mirrors, other aspects of the beamline design and elements may impact the quality of the beam in the experimental station, from the lack of blaze gratings to the need of advanced simulation tools, just to cite two. In this article, after a brief historical excursus, we will present the current state of the art of mirrors, gratings, crystals, lenses, diagnostics, and simulation tools. The main problems yet to solve and a look ahead at what would be achievable in the next decade will give the reader an idea on the search for an almost ideal photon transport system and how the path toward experiments, not conceivable today, will unfold.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Chiral propulsion: The method of effective boundary conditions

We propose to apply an “effective boundary condition” method to the problem of chiral propulsion. For the case of a rotating helix moving through a fluid at a low Reynolds number, the method amounts to replacing the original helix (in the limit of small pitch) by a cylinder, but with a special kind of partial slip boundary conditions replacing the non-slip boundary conditions on the original helix. These boundary conditions are constructed to reproduce far-field velocities of the original problem and are defined by a few parameters (slipping lengths) that can be extracted from a problem in planar rather than cylindrical geometry. We derive the chiral propulsion coefficients for spirals, helicoids, helically modulated cylinders and some of their generalizations using the introduced method. In the case of spirals, we compare our results with the ones derived by Lighthill and find a very good agreement. Here, the proposed method is general and can be applied to any helical shape in the limit of a small pitch. Furthermore, we have established that for a broad class of helical surfaces the dependence of the chiral propulsion on the helical angle θ is universal, x ~ cos θ sin 2θ with the maximal propulsion achieved at the universal angle θ m = tan –1 (1/√2) ≈ 35.26°.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Unifying Quantum Materials Modeling and Experiments: The Role of Machine Learning Interatomic Potentials

Computational experiments have emerged as a powerful complement to traditional experiments in the design of new materials. The development of machine learning (ML) and deep learning techniques, combined with database construction and data mining, has significantly enhanced traditional quantum mechanical methods. This synergy enables the rapid development of structure-property relationships. In this talk, I will discuss our recent efforts in applying Machine Learning Interatomic Potentials (MLIAPs) to accelerate materials modeling across various material classes and challenging applications where traditional methods fall short. First, I will highlight the success of MLIAPs in accurately modeling the melting behavior of complex materials. Our results demonstrate high fidelity with experimental observations and also with calculated reference melting temperatures. In the second application, I will discuss how MLIAPs are trained and applied to elucidate the interplay between segregation tendencies and surface reconstructions in CuNi alloys under oxidizing conditions. A key factor in the success of these MLIAP applications is the design of minimalistic yet flexible datasets along with a computational framework for training MLIAPs.

Saidi, Wissam↗
DOE OSTI2025

Constructing synthetic organosulfur additive for high voltage lithium-ion batteries

Despite its high anodic stability, common organosulfur solvents such as ethyl methyl sulfone and sulfolane typically exhibit poor solid-electrolyte interphase (SEI) formation capability. Here, to address this, the fluorinated organic sulfate 4-(trifluoromethyl)-1,3,2-dioxathiolane 2,2-dioxide (TFDTD) was developed as an effective additive for tailoring organosulfur-based electrolytes in lithium-ion batteries. This development was guided by the functionality selection principle and careful evaluation of feasibility in organic synthesis. TFDTD can be readily synthesized through the reaction between trifluoropropylene glycol and sulfuryl chloride. The ring structure of the organic sulfate enables the formation of a stable SEI on the anode, while the fluorination of the sulfate not only enhances its chemical stability and oxidation potential, but also its effectiveness to protect the anode by increasing its reduction potential, rendering it preferentially reduced on the anode surface before the decomposition of other electrolyte components. Introducing TFDTD facilitates the generation of a robust solidelectrolyte interphase on the graphite anode, significantly enhancing cell performance. Moreover, coupling the use of TFDTD with vinylene carbonate provides further protection on the cathode surface, enabling exceptionally stable, high-voltage, long-term cycling of Gr||NMC full cells.

Functionality selection principle↗
DOE OSTI2020

Data-Driven Many-Body Models for Molecular Fluids: CO 2 /H 2 O Mixtures as a Case Study

In this study, we extend the scope of the many-body TTM-nrg and MB-nrg potential energy functions (PEFs), originally introduced for halide ion–water and alkali-metal ion–water interactions, to the modeling of carbon dioxide (CO2) and water (H2O) mixtures as prototypical examples of molecular fluids. Both TTM-nrg and MB-nrg PEFs are derived entirely from electronic structure data obtained at the coupled cluster level of theory and are, by construction, compatible with MB-pol, a many-body PEF that has been shown to accurately reproduce the properties of water. Although both TTM-nrg and MB-nrg PEFs adopt the same functional forms for describing permanent electrostatics, polarization, and dispersion, they differ in the representation of short-range contributions, with the TTM-nrg PEFs relying on conventional Born–Mayer expressions and the MB-nrg PEFs employing multidimensional permutationally invariant polynomials. By providing a physically correct description of many-body effects at both short and long ranges, the MB-nrg PEFs are shown to quantitatively represent the global potential energy surfaces of the CO 2 –CO 2 and CO 2 –H 2 O dimers and the energetics of small clusters, as well as to correctly reproduce various properties in both gas and liquid phases. Furthermore, building upon previous studies of aqueous systems, our analysis provides further evidence for the accuracy and efficiency of the MB-nrg framework in representing molecular interactions in fluid mixtures at different temperature and pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In Situ Chemical Monitoring and Imaging of Contents within Microfluidic Devices Having a Porous Membrane Wall Using Liquid Microjunction Surface Sampling Probe Mass Spectrometry

The ability to observe dynamic chemical processes (e.g., signaling, transport, etc.) in vivo or in situ using nondestructive chemical imaging opens a new door to understanding the complex dynamics of developing biological systems. With the advent of “biology-on-a-chip” devices has come the ability to monitor dynamic chemical processes in a controlled environment, using these engineered habitats to capture key features of natural systems while allowing visual observation of system development. Having the capability to spatially and temporally map the chemical signals within these devices may yield new insights into the forces that drive biosystem development. Here, a porous membrane sealed microfluidic device was designed to allow normal microfluidic operation while enabling continuous, location specific sampling and chemical characterization by liquid microjunction surface sampling probe mass spectrometry (LMJ-SSP MS). LMJ-SSP was used to extract fluids with nL-to-μL/min flow rates directly from selected areas of the microfluidic device without negatively impacting the device function. These extracts were subsequently characterized using MS. This technique was used to acquire MS images of the entirety of several multi-input microfluidic devices having different degrees of fluid mixing. LMJ-SSP MS imaging visualized the spatial distribution of chemical components within the microfluidic channels and could visualize chemical reactions occurring in the device. These microfluidic devices with a porous membrane wall are wholly compatible with the construction of biology-on-a-chip devices. This ultimately would enable correlation of biosystem physical structure with an evolving chemical environment

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Simulations Supporting the Development of Northstar's Indirect Beam Parameters Monitoring System

NorthStar Medical Radioisotopes, LLC is planning to produce the important medical radioisotope molybdenum-99 (Mo-99), the parent of technetium-99m (Tc-99m), through photonuclear reactions in molybdenum-100 (Mo-100). In this approach, a target comprising multiple thin disks of enriched molybdenum metal is bombarded with a 40-MeV electron beam. Electrons impinged on the molybdenum target produce bremsstrahlung X-rays that cause the nuclear reaction. Because enriched Mo-100 is expensive, there is a desire to utilize as much beam power as possible to achieve maximum production yield and minimize the size of the target. This requirement leads to very high beam power density (and heat deposition in the target), which creates challenging requirements for the cooling of the target. The critical part of the target is the target window. It separates the high-pressure helium cooled target from the vacuum beamline and the subject of structural and thermal stress. The temperature of the target window is proportional to the energy density deposited by the beam, so it is critical to maintain the desired beam profile on the target window. The feasibility of indirectly monitoring the maximum energy density of the beam on the beam window through beam losses at the main collimator (Collimator) before the production target was verified. A model of the NorthStar beam transport line was constructed for this purpose using MAD-X and Tao/Bmad codes. Beam optics were computed for the standard operational scenario, followed by an investigation involving approximately 400 cases with parameter variations in the last tuning quadrupoles. This was done to assess the correlation between losses in the collimator and the peak energy density on the target. We developed a model to explore the potential application of Optical transition radiation (OTR) for controlling beam parameters in the NorthStar beam delivery system. This model was based on a generic formula derived from the fundamental solution of the inhomogeneous wave equation of the vector potential, and allowed us to consider various surfaces, even those with irregular or random features, using numerical integration. We applied the model to OTR generated by relativistic electrons impacting an Inconel® 718 beam window. We examined cases with different levels of the window’s surface roughness, ranging from 0.5 to 3.0 microns of root square mean (RMS) deviation. The results of the OTR simulations provided distributions of OTR photons that can be used to study the limitations of optical systems for controlling beam parameters.

43 PARTICLE ACCELERATORS↗