Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectroscopic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Development of Passive HC/NOx Trap Catalysts for Low Temperature Gasoline Applications

This project aimed to develop fundamental understanding of the chemistry of NO adsorption and reaction in Pd/zeolites so as to facilitate the rational design of passive NOx adsorber catalysts. The approach adopted combined both experimental and computational methods, which together allow a deeper understanding of the governing chemistry than the use of either method alone. The workflow began with Pd/H-CHA and Pd/H-BEA catalyst synthesis and characterization, in which the Si/Al ratio and Al siting were systematically varied. This was followed by catalyst evaluation using temperature-programed adsorption/desorption methods, as well as in situ spectroscopic measurements to probe the chemistry of NO adsorption. In parallel, the adsorption of NO and other relevant species (H 2 O, CO, HCs) was studied by means of quantum chemical calculations in order to rationalize the experimental data and provide additional insights. Catalyst aging studies were also performed with the aim of elucidating the mechanism of catalyst degradation. Finally, the insights gained in this project were applied to the preparation of an optimized HC/NOx adsorber catalyst, the performance of which was studied using exhaust gas from an engine dynamometer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Close Companions around Young Stars

Multiplicity is a fundamental property that is set early during stellar lifetimes, and it is a stringent probe of the physics of star formation. The distribution of close companions around young stars is still poorly constrained by observations. We present an analysis of stellar multiplicity derived from Apache Point Observatory Galactic Evolution Experiment-2 spectra obtained in targeted observations of nearby star-forming regions. This is the largest homogeneously observed sample of high-resolution spectra of young stars. We developed an autonomous method to identify double-lined spectroscopic binaries (SB2s). Out of 5007 sources spanning the mass range of ∼0.05–1.5 M {sub ⊙}, we find 399 binaries, including both radial velocity (RV) variables and SB2s. The mass ratio distribution of SB2s is consistent with being uniform for q < 0.95 with an excess of twins for q > 0.95. The period distribution is consistent with what has been observed in close binaries (<10 au) in the evolved populations. Three systems are found to have q ∼ 0.1, with a companion located within the brown dwarf desert. There are no strong trends in the multiplicity fraction as a function of cluster age from 1 to 100 Myr. There is a weak dependence on stellar density, with companions being most numerous at Σ{sub *} ∼ 30 stars/pc{sup −2} and decreasing in more diffuse regions. Finally, disk-bearing sources are deficient in SB2s (but not RV variables) by a factor of ∼2; this deficit is recovered by the systems without disks. This may indicate a quick dispersal of disk material in short-period equal-mass systems that is less effective in binaries with lower q.

79 ASTRONOMY AND ASTROPHYSICS↗

Rates of elementary reactions - Measurement and applications

Techniques used for characterizing elementary chemical reaction kinetics are explored. Flash- or laser-photolysis (FP) involves producing reactive species on the psec time scale and monitoring the changes spectroscopically. In the discharge flow (DF) method, reactive species are produced continuously in a flow of an inert gas containing the reactants. FP avoids surface and transport effects, while DF allows several reactions to be studied in different regions of one flow. Transport and surface boundary layer models are defined for DF calculations and sample calculations are carried out to illustrate the difficulties inherent in theoretically defining the rate constants for elementary reactions. Applications of the models thus far derived in atmospheric science and combustion studies are discussed.

Kaufman, F.↗

Infrared spectroscopy and Mie scattering of acetylene aerosols formed in a low temperature diffusion cell

A method is described for forming and spectroscopically characterizing cryogenic aerosols formed in a low temperature gas cell. By adjusting the cell pressure, gas composition and flow rate, the size distribution of aerosol particles can be varied over a wide range. The combination of pressure and flow rate determine the residence time of the aerosols in the cell and hence the time available for the particles to grow. FTIR spectroscopy, over the range from 600/cm to 6000/cm, is used to characterize the aerosols. The particle size distribution can be varied so that, at one extreme, the spectra show only absorption features associated with the infrared active vibrational bands and, at the other, they display both absorption and Mie scattering. In the latter case, Mie scattering theory is used to obtain semiquantitative aerosol size distributions, which can be understood in terms of the interplay between nucleation and condensation. In the case of acetylene aerosols, the infrared spectra suggest that the particles exist in the high temperature cubic phase of the solid.

Dunder, T.↗

Chemical sensing with pulsed QC-DFB lasers operating at 15.6 micrometers

Pulsed thermoelectrically cooled QC-DFB lasers operating at 15.6 micrometers were characterized for spectroscopic gas sensing applications. A new method for wavelength scanning based on repetition rate modulation was developed. A non-wavelength-selective pyroelectric detector was incorporated in the sensor configuration giving the advantage of room-temperature operation and low cost. Absorption lines of CO2 and H2O were observed in ambient air, providing information about the concentration of these species.

NASA Discipline Life Sciences Technologies↗

Axial Ligand Effects on the Geometric And Electronic Structures of Nonheme Oxoiron(IV) Complexes

A series of complexes [Fe{sup IV}(O)(TMC)(X)]{sup +} (where X = OH{sup -}, CF{sub 3}CO{sub 2}{sup -}, N{sub 3}{sup -}, NCS{sup -}, NCO{sup -}, and CN{sup -}) were obtained by treatment of the well-characterized nonheme oxoiron(IV) complex [Fe{sup IV}(O)(TMC)(NCMe)]{sup 2+} (TMC = tetramethylcyclam) with the appropriate NR{sub 4}X salts. Because of the topology of the TMC macrocycle, the [Fe{sup IV}(O)(TMC)(X)]{sup +} series represents an extensive collection of S = 1 oxoiron(IV) complexes that only differ with respect to the ligand trans to the oxo unit. Electronic absorption, Fe K-edge X-ray absorption, resonance Raman, and Moessbauer data collected for these complexes conclusively demonstrate that the characteristic spectroscopic features of the S = 1 Fe{sup IV} {double_bond} O unit, namely, (1) the near-IR absorption properties, (2) X-ray absorption pre-edge intensities, and (3) quadrupole splitting parameters, are strongly dependent on the identity of the trans ligand. However, on the basis of extended X-ray absorption fine structure data, most [Fe{sup IV}(O)(TMC)(X)]{sup +} species have Fe {double_bond} O bond lengths similar to that of [Fe{sup IV}(O)(TMC)(NCMe)]{sup 2+} (1.66 {+-} 0.02 {angstrom}). The mechanisms by which the trans ligands perturb the Fe{sup IV} {double_bond} O unit were probed using density functional theory (DFT) computations, yielding geometric and electronic structures in good agreement with our experimental data. These calculations revealed that the trans ligands modulate the energies of the Fe {double_bond} O {sigma}- and {pi}-antibonding molecular orbitals, causing the observed spectroscopic changes. Time-dependent DFT methods were used to aid in the assignment of the intense near-UV absorption bands found for the oxoiron(IV) complexes with trans N{sub 3}{sup -}, NCS{sup -}, and NCO{sup -} ligands as X{sup -}-to-Fe{sup IV} {double_bond} O charge-transfer transitions, thereby rationalizing the resonance enhancement of the {nu}(Fe {double_bond} O) mode upon excitation of these chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions Between Oxygen and Nitrogen: O[Single Bond]N, O[Single Bond]N (sub 2), and O (sub 2)[Single Bond]N (sub 2)

Potential energy curves for 0-N interactions corresponding to the X (sup 2) II (sub t/2), X (sup 2) II (sub 3/2), A (sup 2) Eta (sup plus), B (sup 2) II, C (sup 2) II, D (sup 2) Eta (sup plus), E (sup 2) Eta (sup plus), and B prime (sup 2 delta) states of nitric oxide have been calculated from spectroscopic data by the Rydberg- Klein-Rees method. Curves for the (sup 4) II, (sup 2) Eta, (sup 4) Eta, (sup 6) Eta, and (sup 6) II states have been obtained from limited spectroscopic results and from relations derived from approximate quantum-mechanical calculations. Two semi-independent calculations have been made, and are in good agreement with each other. The quantum-mechanical relations also lead to approximate curves for the O[Single Bond]N, and O[Single Bond]N (sub 2) interactions over a limited range. The O (sub 2)[Single Bond]N (sub 2) interaction is consistent with one valid at larger separation distances which has been derived from high-temperature gas viscosity data.

Vanderslice, Joseph T.↗

Chemical detection and laser wavelength stabilization employing spectroscopic absorption via laser compliance voltage sensing

Systems and methods are disclosed that provide a direct indication of the presence and concentration of an analyte within the external cavity of a laser device that employ the compliance voltage across the laser device. The systems can provide stabilization of the laser wavelength. The systems and methods can obviate the need for an external optical detector, an external gas cell, or other sensing region and reduce the complexity and size of the sensing configuration.

47 OTHER INSTRUMENTATION↗

Chemical detection and laser wavelength stabilization employing spectroscopic absorption via laser compliance voltage sensing

Systems and methods are disclosed that provide a direct indication of the presence and concentration of an analyte within the external cavity of a laser device that employ the compliance voltage across the laser device. The systems can provide stabilization of the laser wavelength. The systems and methods can obviate the need for an external optical detector, an external gas cell, or other sensing region and reduce the complexity and size of the sensing configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Block correlated second order perturbation theory with a generalized valence bond reference function

The block correlated second-order perturbation theory with a generalized valence bond (GVB) reference (GVB-BCPT2) is proposed. In this approach, each geminal in the GVB reference is considered as a “multi-orbital” block (a subset of spin orbitals), and each occupied or virtual spin orbital is also taken as a single block. The zeroth-order Hamiltonian is set to be the summation of the individual Hamiltonians of all blocks (with explicit two-electron operators within each geminal) so that the GVB reference function and all excited configuration functions are its eigenfunctions. The GVB-BCPT2 energy can be directly obtained without iteration, just like the second order Møller–Plesset perturbation method (MP2), both of which are size consistent. We have applied this GVB-BCPT2 method to investigate the equilibrium distances and spectroscopic constants of 7 diatomic molecules, conformational energy differences of 8 small molecules, and bond-breaking potential energy profiles in 3 systems. GVB-BCPT2 is demonstrated to have noticeably better performance than MP2 for systems with significant multi-reference character, and provide reasonably accurate results for some systems with large active spaces, which are beyond the capability of all CASSCF-based methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Early Transition Metal Oxides as Catalysts: Crossing Scales from Clusters to Single Crystals to Functioning Materials

The overall goal of this program is to investigate the electronic structure and chemical bonding of early transition metal oxide clusters and use them as well-defined molecular models to obtain insight into properties and mechanisms of oxide catalysts, as well as to provide accurate spectroscopic and molecular information to verify theoretical methods used to predict materials properties. A laser vaporization cluster source is used to produce metal oxide clusters with different sizes, structures, and compositions. Well-defined inorganic polyoxometalate clusters in solution are transported in the gas phase using electrospray. Two state-of-the-art photoelectron spectroscopy apparatuses are used to interrogate the oxide clusters and polyoxometalate anions in the gas phase to obtain spectroscopic and electronic structure information. The experimental effort is assisted by theoretical calculations to understanding the structures, chemical bonding, and catalytical properties of the transition metal oxide clusters. The research approach combines novel and flexible experimental techniques and advanced theoretical/computational methodologies and seeks molecular-level information to aiding the design of new catalysts, as well as mechanistic understanding. We have focused on the investigation of tungsten oxide clusters containing three W atoms: W{sub 3}O{sub x}{sup -} (x = 7-11). A number of interesting findings have been made. We observed that the oxygen-poor W{sub 3}O8 cluster contains a localized W{sup 4+} center, which can be used as a molecular model for O-deficient defect sites. A chemisorption energy was obtained through density functional calculations for W{sub 3}O8 + O{sub 2} {yields} W{sub 3}O{sub 10} as -78 kcal/mol. We further found that the neutral stoichiometric W{sub 2}O{sub 6} and W{sub 3}O{sub 9} clusters do not react with O{sub 2} and they only form physi-sorbed complexes, W{sub 2}O{sub 6}(O{sub 2}) and W{sub 3}O{sub 9}(O{sub 2}). However, the negatively charged W{sub 2}O{sub 6}{sup -} and W{sub 3}O{sub 9}{sup -} clusters are found to form chemisorbed complexes due to the presence of the extra electron. Thus, the W{sub 2}O{sub 6}{sup -} and W{sub 3}O{sub 9}{sup -} negative clusters can be viewed as models for O{sub 2} interaction with a reduced W site (W{sup 5+}) on the oxide surface. These studies also led to the surprising observation of the first d-orbital aromatic clusters in W{sub 3}O{sub 9}{sup 2-} and Mo{sub 3}O{sub 9}{sup 2-}, which each contains a completely delocalized three-center two-electron bond made entirely made of the metal d orbitals. This last result was highlighted in both Chem & Eng. News and Nature. We further studied a series of small metalate anions using electrospray, including the hydroxo and methoxo oxometalate MO{sub 3}(OH){sup -} and MO{sub 3}(OCH{sub 3}){sup -}, and the dimetalates: M{sub 2}O{sub 7}{sup 2-}, MM{prime}O{sub 7}{sup 2-}, and M{sub 2}O{sub 7}{sup -} (M, M{prime} = Cr, Mo, and W).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pair Identity and Smooth Variation Rules Applicable for the Spectroscopic Parameters of H2O Transitions Involving High-J States

Two basic rules (i.e. the pair identity and the smooth variation) applicable for H2O transitions involving high-J states have been discovered. The origins of these rules are the properties of the energy levels and wavefunctions of H2O states with the quantum number J above certain boundaries. As a result, for lines involving high-J states in individually defined groups, all their spectroscopic parameters (i.e. the transition wavenumber, intensity, pressure-broadened half-width, pressure-induced shift, and temperature exponent) must follow these rules. One can use these rules to screen spectroscopic data provided by databases and to identify possible errors. In addition, by using extrapolation methods within the individual groups, one is able to predict the spectroscopic parameters for lines in this group involving very high-J states. The latter are required in developing high-temperature molecular spectroscopic databases such as HITEMP.

Ma, Q.↗

Synthesis of Au/SnO{sub 2} core-shell structure nanoparticles by a microwave-assisted method and their optical properties

Au/SnO{sub 2} core-shell structure nanoparticles were synthesized using the microwave hydrothermal method. The optical and morphological properties of these particles were examined and compared with those obtained by the conventional hydrothermal method. In microwave preparation, the peak position of the UV-visible plasmon absorption band of Au nanoparticles was red-shifted from 520 to 543 nm, due to the formation of an SnO{sub 2} shell. An SnO{sub 2} shell formation was complete within 5 min. The thickness of the SnO{sub 2} shell was 10-12 nm, and the primary particle size of SnO{sub 2} crystallites was 3-5 nm. For the core-shell particles prepared by a conventional hydrothermal method, the shell formed over the entire synthesis period and was not as crystalline as those produced, using the microwave method. The relationship between the morphological and spectroscopic properties and the crystallinity of the SnO{sub 2} shell are discussed. -- Graphical abstract: In microwave preparation, the peak position of UV-visible absorption band of Au nanoparticles was red-shifted from 520 to 543 nm, due to the formation of an SnO{sub 2} shell with high crystallinity. Display Omitted Research highlights: > Au/SnO{sub 2} core-shell structure NPs were synthesized by the microwave-assisted method. > The peak position of an SP band of Au/SnO{sub 2} colloid was red-shifted till 543 nm. > The particles size of an SnO{sub 2} in the shell layer was 3-5 nm. > The crystallinity of an SnO{sub 2} shell was increased by the microwave hydrothermal reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE IMACS CLUSTER BUILDING SURVEY. I. DESCRIPTION OF THE SURVEY AND ANALYSIS METHODS

The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines. With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines.With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

IMACS↗

PHOTOMETRIC REDSHIFTS OF SUBMILLIMETER GALAXIES

We use the photometric redshift method of Chakrabarti and McKee to infer photometric redshifts of submillimeter galaxies with far-IR (FIR) Herschel data obtained as part of the PACS Evolutionary Probe program. For the sample with spectroscopic redshifts, we demonstrate the validity of this method over a large range of redshifts (4 {approx}> z {approx}> 0.3) and luminosities, finding an average accuracy in (1 + z{sub phot})/(1 + z{sub spec}) of 10%. Thus, this method is more accurate than other FIR photometric redshift methods. This method is different from typical FIR photometric methods in deriving redshifts from the light-to-gas mass (L/M) ratio of infrared-bright galaxies inferred from the FIR spectral energy distribution, rather than dust temperatures. To assess the dependence of our photometric redshift method on the data in this sample, we contrast the average accuracy of our method when we use PACS data, versus SPIRE data, versus both PACS and SPIRE data. We also discuss potential selection effects that may affect the Herschel sample. Once the redshift is derived, we can determine physical properties of infrared-bright galaxies, including the temperature variation within the dust envelope, luminosity, mass, and surface density. We use data from the GOODS-S field to calculate the star formation rate density (SFRD) of submillimeter bright sources detected by AzTEC and PACS. The AzTEC-PACS sources, which have a threshold 850 {mu}m flux {approx}> 5 mJy, contribute 15% of the SFRD from all ultraluminous infrared galaxies (L{sub IR} {approx}> 10{sup 12} L{sub Sun }), and 3% of the total SFRD at z {approx} 2.

79 ASTRONOMY AND ASTROPHYSICS↗

A NEW MILKY WAY HALO STAR CLUSTER IN THE SOUTHERN GALACTIC SKY

We report on the discovery of a new Milky Way (MW) companion stellar system located at ({alpha}{sub J2000,}{delta}{sub J2000}) = (22{sup h}10{sup m}43{sup s}.15, 14 Degree-Sign 56 Prime 58 Double-Prime .8). The discovery was made using the eighth data release of SDSS after applying an automated method to search for overdensities in the Baryon Oscillation Spectroscopic Survey footprint. Follow-up observations were performed using Canada-France-Hawaii-Telescope/MegaCam, which reveal that this system is comprised of an old stellar population, located at a distance of 31.9{sup +1.0}{sub -1.6} kpc, with a half-light radius of r{sub h}= 7.24{sup +1.94}{sub -1.29} pc and a concentration parameter of c = log{sub 10}(r{sub t} /r{sub c} ) = 1.55. A systematic isochrone fit to its color-magnitude diagram resulted in log (age yr{sup -1}) = 10.07{sup +0.05}{sub -0.03} and [Fe/H] = -1.58{sup +0.08}{sub -0.13}. These quantities are typical of globular clusters in the MW halo. The newly found object is of low stellar mass, whose observed excess relative to the background is caused by 95 {+-} 6 stars. The direct integration of its background decontaminated luminosity function leads to an absolute magnitude of M{sub V} = -1.21 {+-} 0.66. The resulting surface brightness is {mu}{sub V} = 25.90 mag arcsec{sup -2}. Its position in the M{sub V} versus r{sub h} diagram lies close to AM4 and Koposov 1, which are identified as star clusters. The object is most likely a very faint star cluster-one of the faintest and lowest mass systems yet identified.

79 ASTRONOMY AND ASTROPHYSICS↗