Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Electronic Structure of Warm Dense Copper Studied by Ultrafast X-Ray Absorption Spectroscopy

We use time-resolved x-ray absorption spectroscopy to investigate the unoccupied electronic density of states of warm dense copper that is produced isochorically through the absorption of an ultrafast optical pulse. The temperature of the superheated electron-hole plasma, which ranges from 4000 to 10 000 K, was determined by comparing the measured x-ray absorption spectrum with a simulation. The electronic structure of warm dense copper is adequately described with the high temperature electronic density of state calculated by the density functional theory. The dynamics of the electron temperature is consistent with a two-temperature model, while a temperature-dependent electron-phonon coupling parameter is necessary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical and Electrochemical Lithiation of van der Waals Tetrel-Arsenides

Lithiation of van der Waals tetrel–arsenides, GeAs and SiAs, has been researched. Electrochemical lithiation demonstrated large initial capacities of over 950 mAh g -1 accompanied by rapid fading over successive cycling in the voltage range 0.01–2 V. Limiting the voltage range to 0.5–2 V achieved more stable cycling, which was attributed to the intercalation process with lower capacities. Ex situ powder X–ray diffraction confirmed complete amorphization of the samples after lithiation, as well as recrystallization of the binary tetrel–arsenide phases after full delithiation in the voltage range 0.5–2 V. Solid–state synthetic methods produce layered phases, in which Si–As or Ge–As layers are separated by Li cations. The first layered compounds in the corresponding ternary systems were discovered, Li 0.9 Ge 2.9 As 3.1 and Li 3 Si 7 As 8 , which crystallize in the Pbam (No. 55) and P2/m (No. 10) space groups, respectively. Semiconducting layered GeAs and SiAs accommodate the extra charge from Li cations through structural rearrangement in the Si–As or Ge–As layers and eventually by replacement of the tetrel dumbbells with sets of Li atoms. Ge and Si monoarsenides reflected high structural flexibility and a mild ability for reversible lithiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas phase contributions to topochemical hydride reduction reactions

Alkali and alkali earth hydrides have been used as solid state reductants recently to yield many interesting new oxygen-deficient transition metal oxides. These reactions have tacitly been assumed to be a solid phase reaction between the reductant and parent oxide. We have conducted a number of experiments with physical separation between the reductant and oxides, and find that in some cases reduction proceeds even when the reagents are physically separated, implying reactions with in-situ generated H{sub 2} and, to a lesser extent, getter mechanisms. Our findings change our understanding of these topochemical reactions, and should enhance the synthesis of additional new oxides and nanostructures. - Graphical abstract: Topochemical reductions with hydrides: Solid state or gas phase reaction? Display Omitted - Highlights: • SrFeO{sub 2} and LaNiO{sub 2} were prepared by topochemical reduction of oxides. • Separating the reducing agent (CaH{sub 2}, Mg metal) from the oxide still results in reduction. • Such topochemical reactions can occur in the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shape transition of unstrained flattest single-walled carbon nanotubes under pressure

Single walled carbon nanotube's (SWCNT's) cross section can be flattened under hydrostatic pressure. One example is the cross section of a single walled carbon nanotube successively deforms from the original round shape to oval shape, then to peanut-like shape. At the transition point of reversible deformation between convex shape and concave shape, the side wall of nanotube is flattest. This flattest tube has many attractive properties. In the present work, an approximate approach is developed to determine the equilibrium shape of this unstrained flattest tube and the curvature distribution of this tube. Our results are in good agreement with recent numerical results, and can be applied to the study of pressure controlled electric properties of single walled carbon nanotubes. The present method can also be used to study other deformed inorganic and organic tube-like structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The X-Ray Emission Effectiveness of Plasma Mirrors: Reexamining Power-Law Scaling for Relativistic High-Order Harmonic Generation

Ultrashort pulsed lasers provide uniquely detailed access to the ultrafast dynamics of physical, chemical, and biological systems, but only a handful of wavelengths are directly produced by solid-state lasers, necessitating efficient high-power frequency conversion. Relativistic plasma mirrors generate broadband power-law spectra, that may span the gap between petawatt-class infrared laser facilities and x-ray free-electron lasers; despite substantial theoretical work the ultimate efficiency of this relativistic high-order-harmonic generation remains unclear. We show that the coherent radiation emitted by plasma mirrors follows a power-law distribution of energy over frequency with an exponent that, even in the ultrarelativistic limit, strongly depends on the ratio of laser intensity to plasma density and exceeds the frequently quoted value of -8/3 over a wide range of parameters. The coherent synchrotron emission model, when adequately corrected for the finite width of emitting electron bunches, is not just valid for p-polarized light and thin foil targets, but generally describes relativistic harmonic generation, including at normal incidence and with finite-gradient plasmas. Our numerical results support the ω-4/3 scaling of the synchrotron emission model as a limiting efficiency of the process under most conditions. The highest frequencies that can be generated with this scaling are usually restricted by the width of the emitting electron bunch rather than the Lorentz factor of the fastest electrons. The theoretical scaling relations developed here suggest, for example, that with a 20-PW 800-nm driving laser, 1 TW/harmonic can be produced for 1-keV photons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metal–oxygen decoordination stabilizes anion redox in Li-rich oxides

Reversible high-voltage redox chemistry is an essential component of many electrochemical technologies, from (electro)catalysts to lithium-ion batteries. Oxygen-anion redox has garnered intense interest for such applications, particularly lithium-ion batteries, as it offers substantial redox capacity at more than 4 V versus Li/Li + in a variety of oxide materials. However, oxidation of oxygen is almost universally correlated with irreversible local structural transformations, voltage hysteresis and voltage fade, which currently preclude its widespread use. By comprehensively studying the Li 2-x Ir 1-y Sn y O 3 model system, which exhibits tunable oxidation state and structural evolution with y upon cycling, we reveal here that this structure–redox coupling arises from the local stabilization of short approximately 1.8 Å metal–oxygen π bonds and approximately 1.4 Å O–O dimers during oxygen redox, which occurs in Li 2-x Ir 1-y Sn y O 3 through ligand-to-metal charge transfer. Crucially, formation of these oxidized oxygen species necessitates the decoordination of oxygen to a single covalent bonding partner through formation of vacancies at neighbouring cation sites, driving cation disorder. These insights establish a point-defect explanation for why anion redox often occurs alongside local structural disordering and voltage hysteresis during cycling. Our findings offer an explanation for the unique electrochemical properties of lithium-rich layered oxides, with implications generally for the design of materials employing oxygen redox chemistry.

25 ENERGY STORAGE↗

New Concepts in Electrolytes

Over the past decades, Li-ion battery (LIB) has turned into one of the most important advances in the history of technology due to its extensive and in-depth impact on our life. Its omnipresence in all electric vehicles, consumer electronics and electric grids relies on the precisely tuned electrochemical dynamics and interactions among the electrolytes and the diversified anode and cathode chemistries therein. Furthermore, with consumers' demand for battery performance ever increasing, more and more stringent requirements are being imposed upon the established equilibria among these LIB components, and it became clear that the state-of-the-art electrolyte systems could no longer sustain the desired technological trajectory. Driven by such gap, researchers started to explore more unconventional electrolyte systems. From superconcentrated solvent-in-salt electrolytes to solid-state electrolytes, the current research realm of novel electrolyte systems has grown to unprecedented levels. In this review, we will avoid discussions on current state-of-the-art electrolytes but instead focus exclusively on unconventional electrolyte systems that represent new concepts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Continuous quantum phase transition between two topologically distinct valence bond solid states associated with the same spin value

We propose a one-dimensional quantum Heienberg spin-2 chain, which exhibits two topologically distinct valence bond solid states in two different solvable limits. We then construct the phase diagram and study the quantum phase transition between these two states using infinite time evolving block decimation algorithms. From the scaling relation between the entanglement entropy and the correlation length, we determine that the central charge for the underlying critical conformal field theory is around two.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiphonon: Phonon Density of States tools for Inelastic Neutron Scattering Powder Data

The multiphonon python package calculates phonon density of states, a reduced representation of vibrational property of condensed matter (see, for example, Section “Density of Normal Modes” in Chapter 23 “Quantum Theory of the Harmonic Crystal” of (Ashcroft and Mermin 2011)), from inelastic neutron scattering (see, for example (B. Fultz et al. 2006–2016)) spectrum from a powder sample. Inelastic neutron spectroscopy (INS) is a probe of excitations in solids of vibrational or magnetic origins. In INS, neutrons can lose(gain) energy to(from) the solid in the form of quantized lattice vibrations – phonons. Measuring phonon density of states is usually the first step in determining the phonon properties of a material experimentally. Phonons play a very important role in understanding the physical properties of a solid, including thermal conductivity and electrical conductivity. Hence, INS is an important tool for studying thermoelectric materials (Budai et al. 2014, Li et al. (2015)), where low thermal conductivity and high electrical conductivity are desired. Study of phonon entropy also made important contributions to the research of thermal dynamics and phase stability of materials (B. Fultz 2010, bogdanoff2002phonon, swan2006vibrational).

36 MATERIALS SCIENCE↗

Enhanced 1.53 μm emission of Er{sup 3+} ions in phosphate glass via energy transfer from Cu{sup +} ions

Optimizing the efficiency of Er{sup 3+} emission in the near-infrared telecommunication window in glass matrices is currently a subject of great interest in photonics research. In this work, Cu{sup +} ions are shown to be successfully stabilized at a high concentration in Er-containing phosphate glass by a single-step melt-quench method, and demonstrated to transfer energy to Er{sup 3+} thereby enhancing the near-infrared emission about 15 times. The spectroscopic data indicate an energy conversion process where Cu{sup +} ions first absorb photons broadly around 360 nm and subsequently transfer energy from the Stokes-shifted emitting states to resonant Er{sup 3+} absorption transitions in the visible. Consequently, the Er{sup 3+} electronic excited states decay and the {sup 4}I{sub 3/2} metastable state is populated, leading to the enhanced emission at 1.53 μm. Monovalent copper ions are thus recognized as sensitizers of Er{sup 3+} ions, suggesting the potential of Cu{sup +} co-doping for applications in the telecommunications, solar cells, and solid-state lasing realizable under broad band near-ultraviolet optical pumping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of antiperovskite nitrides GaNCr{sub 3−x}Mn{sub x}

The effects of Mn-doping on the crystal structure, magnetic and electrical/thermal transport properties of GaNCr{sub 3−x}Mn{sub x} (0≤x≤1.5) have been investigated systematically. As a result, the lattice constant and the residual resistivity increase, while the residual resistivity ratio, electron thermal conductivity, and room-temperature carrier concentration decrease with increasing Mn-doping level. The ground state of parent compound GaNCr{sub 3} is nonmagnetic, interestingly, the ferrimagnetism and antiferromagnetism are observed in Mn-doped samples GaNCr{sub 3−x}Mn{sub x}. Correspondingly, around the antiferromagnetic transition of GaNCr{sub 3−x}Mn{sub x} the correlation effect is studied. Furthermore, the analysis of thermal conductivity data suggests that the electron thermal conductivity plays a major role in total thermal conductivity of GaNCr{sub 3} at low temperatures, while the phonon thermal conductivity is dominant for Mn-doped GaNCr{sub 3} in the whole temperature of 5–330 K. The positive values of Seebeck coefficient and Hall coefficient indicate that the nature of charge carrier is hole-type in GaNCr{sub 3−x}Mn{sub x}. - Graphical abstract: The Rietveld refinement and structural properties of GaNCr{sub 3−x}Mn{sub x}. Display Omitted - Highlights: • Polycrystalline GaNCr{sub 3−x}Mn{sub x} are synthesized by using the solid state reaction method. • A good quality of samples is verified by Rietveld refinement and RRR values. • Antiferromagnetic and ferromagnetic competitions are induced by Mn-doping. • We present a comprehensive understanding of physical properties of GaNCr{sub 3−x}Mn{sub x}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pair wave function symmetry in UTe2 from zero-energy surface state visualization

Although nodal spin-triplet topological superconductivity appears probable in uranium ditelluride (UTe 2 ), its superconductive order parameter Δ k remains unestablished. In theory, a distinctive identifier would be the existence of a superconductive topological surface band, which could facilitate zero-energy Andreev tunneling to an s-wave superconductor and also distinguish a chiral from a nonchiral Δ k through enhanced s-wave proximity. In this study, we used s-wave superconductive scan tips and detected intense zero-energy Andreev conductance at the UTe 2 (0-11) termination surface. Imaging revealed subgap quasiparticle scattering interference signatures with a-axis orientation. The observed zero-energy Andreev peak splitting with enhanced s-wave proximity signifies that Δ k of UTe 2 is a nonchiral state: B 1u , B 2u , or B 3u . However, if the quasiparticle scattering along the a axis is internodal, then a nonchiral B 3u state is the most consistent for UTe 2 .

Gu, Qiangqiang [Cornell Univ., Ithaca, NY (United ↗

Signal Origin of Electrochemical Strain Microscopy and Link to Local Chemical Distribution in Solid State Electrolytes

Electrochemical strain microscopy (ESM) is a distinguished method to characterize Li-ion mobility in energy materials with extremely high spatial resolution. The exact origin of the cantilever deflection when the technique is applied on solid state electrolytes (SSEs) is currently discussed in the literature. Under-standing local properties and influences on ion mobility in SSEs is of utmost importance to improve such materials for next generation batteries. Here, the exact signal formation process of ESM when applied on sodium super ionic conductor (NASICON)-type SSE containing Na- and Li-ions is investigated. Changes in the dielectric properties, which are linked to the local chemical composition, are found to be responsible for the observed contrast in the deflection of the cantilever instead of a physical volume change as a result of Vegard´s Law. The cantilever response is strongly reduced in areas of high sodium content which is attributed to a reduction of the tip-sample capacitance in comparison to areas with high lithium content. This is the first time a direct link between electrostatic forces in contact mode and local chemical information is demonstrated on SSEs. Furthermore, the results open up new possibilities in information gain since dielectric proper-ties are sensitive to subtle changes in local chemical composition.

36 MATERIALS SCIENCE↗

Effect of Polymer Molecular Weight on the Crystallization Behavior of Indomethacin Amorphous Solid Dispersions

The influence of the molecular weight of polyvinylpyrrolidone (PVP) on the molecular mobility and physical stability of indomethacin (IMC)–PVP solid dispersions was investigated over a wide temperature range in the supercooled state. As the polymer molecular weight increased, there was a decrease in molecular mobility as evident from the longer α-relaxation times. Inhibition of IMC crystallization also increased as a function of polymer molecular weight. The extent of H-bonding interaction between drug and polymer, quantified by ssNMR, was independent of polymer molecular weight. Over a polymer concentration range of 5–20% w/w, the temperature dependence of mobility and viscosity was reasonably similar for different grades of PVP. Here, it was concluded that the increase in effectiveness in crystallization inhibition as a function of polymer molecular weight is due to the increased viscosity, which slows down the mobility of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal Synthesis, Crystal Structure, and Photoluminescent Properties of Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}[Co(H{sub 2}O){sub 6}]

Single crystal of Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}[Co(H{sub 2}O){sub 6}] was prepared and found to crystallize in the monoclinic crystal system in the sp. gr. C2/c, with Z = 2, and unit cell parameters a = 22.1857(15) Å, b = 13.6477(8) Å, c = 15.6921(10) Å, β = 117.842(9)°, V = 4201.3(4) Å{sup 3}. The crystal was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The single crystal X-ray diffraction analysis revealed that the crystal has a lamellar structure in which a cobalt hydrate is sandwiched within the Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}{sup 2-} chains. Furthermore, the room temperature photoluminescence spectrum of the complex was investigated in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗