Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

New solid acids in the triple-layer Dion-Jacobson layered perovskite family

Research highlights: {yields} New triple-layer Dion-Jacobson layered perovskite solid solutions synthesized. {yields} New series of Ta-doped layered perovskite solid acids, HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}. {yields} New series of Sr-doped layered perovskite solid acids, HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}. {yields} Layered perovskites with highest Ta content are weaker solid acids than HCa{sub 2}Nb{sub 3}O{sub 10}. -- Abstract: Dion-Jacobson type layered perovskites such as A'Ca{sub 2}Nb{sub 3}O{sub 10} (A' = K, Rb, H) have continued to be of great interest due to their compositional variability, rich interlayer chemistry, and wide range of physical properties. In this study, we investigated the range and effects of substitutional doping of Ta{sup 5+} for Nb{sup 5+} and of Sr{sup 2+} for Ca{sup 2+} in A'Ca{sub 2}Nb{sub 3}O{sub 10}. We have prepared and characterized three new solid solutions: KCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}, RbCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}, and RbCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}. These materials all readily undergo proton exchange to form two new series of hydrated solid acid phases, which in most cases can be dehydrated to form stable HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10} and HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10} compounds. Intercalation studies with n-hexylamine and pyridine were carried out to gauge the relative Bronsted acidities across the HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10} series, and we determined that materials with the highest tantalum contents are weaker acids than the parent compound HCa{sub 2}Nb{sub 3}O{sub 10}. Preliminary intercalation studies with pyridine for the HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}.yH{sub 2}O solid acids, however, showed no significant difference in acidity with varying strontium content.

36 MATERIALS SCIENCE↗

Thermodynamic model for the solubility of BaSeO4(cr) in the aqueous Ba2+-SeO42--Na+-H+-OH--H2O system: Extending to high selenate concentrations

The solubility of Ba(SeO4, SO4) precipitates was determined as a function of the BaSeO4 mole fractions, ranging from 0.0015 to 0.3830, and time with an equilibration period extending to as long as 302 days. Equilibrium/steady state conditions in this system are reached in ≤ 65 days. Pitzer’s ion interaction model was used to calculate solid and aqueous phase activity coefficients. Thermodynamic analyses showed that the data do not satisfy Gibbs-Duhem equation, thereby demonstrating that a single-solid solution phase does not control both the selenate and sulfate concentrations. Our extensive data with log10 [Ba]) ranging from -3.6 to -5.9 mol.kg-1, log10 [SeO4]) ranging from -3.6 to -5.2 mol.kg-1, and log10 [SO4] ranging from -4.0 to -5.3 mol.kg-1 can be explained with the formation of an ideal BaSeO4 solid solution phase that controls the selenium concentrations and a slightly disordered/less-crystalline BaSO4(s) (log10 K0sp = -9.5 instead of -10.05 for barite) that controls the sulfate concentrations. In these experiments the BaSO4 component of the solid solution phase never reaches thermodynamic equilibrium with the aqueous phase. Thermodynamic interpretations of the data show that both the ideal BaSeO4 solid solution phase and less-crystalline BaSO4(s) phase are in equilibrium with each other in the entire range of BaSeO4 mole fractions investigated in this study.

Rai, Dhanpat↗

Atomic Ordering-Induced Ensemble Variation in Alloys Governs Electrocatalyst On/Off States

The catalytic behavior of a material is influenced by ensembles—the geometric configuration of atoms. Traditional approaches, mainly utilizing solid-solution alloys in electrocatalysis, have often overlooked the challenges posed by concurrent changes in the electronic structure (i.e. d-band center) when the composition is altered. Here, this study introduces a methodology that distinctly separates the geometric effects (i.e. ensembles) from the electronic structure. We compare the reactivity of compositionally identical, but structurally different Pd 3 Bi ordered intermetallic and solid-solution alloys. Remarkably, we find that Pd 3 Bi intermetallics display nearly no reactivity for the methanol oxidation (MOR), while their solid-solution counterparts have significant reactivity. This highlights a unique case where materials with identical chemical compositions demonstrate drastically different catalytic behavior underscoring the critical importance of ensembles in electrocatalysis. Specifically, Pd 3 Bi intermetallics form smaller ensembles (average coordination number: 4.5 ± 1.6) with almost no measurable MOR activity at room temperature, in contrast to the solid-solution Pd 3 Bi that exhibit larger ensembles (average coordination number: 6.8 ± 0.9) and considerable MOR reactivity (0.5 mA cm −2 Pd ). An ordered Pd 3 Bi alloy, with an intermediate ensemble size (average coordination number: 5.3 ± 1.2), displays moderate MOR activity (0.1 mA cm −2 Pd ), further confirming the direct correlation between ensemble size and catalytic activity. Notably, all Pd 3 Bi alloys maintain similar electronic structures, because the chemical composition of the alloys is fixed, indicating that the differences in reactivity are predominantly from changes to the ensemble size. Our findings offer an approach for precisely controlling catalytic activity through manipulating the geometric configuration of the atoms within an alloy, paving the way for more efficient catalyst design.

alloys↗

Thermodynamic Model for the Solubility of Ba(SeO 4 , SO 4 ) Precipitates

The solubility of Ba(SeO 4 , SO 4 ) precipitates was determined as a function of the BaSeO 4 mole fractions, ranging from 0.0015 to 0.3830, and time with an equilibration period extending to as long as 302 days. Equilibrium/steady state conditions in this system are reached in ≤ 65 days. Pitzer’s ion interaction model was used to calculate solid and aqueous phase activity coefficients. Thermodynamic analyses showed that the data do not satisfy Gibbs-Duhem equation, thereby demonstrating that a single-solid solution phase does not control both the selenate and sulfate concentrations. Our extensive data with log 10 [Ba] ranging from -3.6 to -5.9 mol kg -1 , log 10 [SeO 4 ] rangingfrom-3.6 to -5.2 mol kg -1 , and log 10 [SO 4 ] ranging from-4.0 to -5.3 mol kg -1 can be explained with the formation of an ideal BaSeO 4 solid solution phase that controls the selenium concentrations and a slightly disordered/less-crystalline BaSO 4 (s) (log 10 Κ° sp = -9.5 instead of -10.05 for barite) that controls the sulfate concentrations. In these experiments the BaSO 4 component of the solid solution phase never reaches thermodynamic equilibrium with the aqueous phase. Thermodynamic interpretations of the data show that both the ideal BaSeO 4 solid solution phase and less-crystalline BaSO 4 (s) phase are in equilibrium with each other in the entire range of BaSeO 4 mole fractions investigated in this study.

Rai, D.↗

Phase Diagram and Dielectric Properties of (1–x)Ba(Ti{sub 1–y}Zr{sub y})O{sub 3} · xPbTiO{sub 3} Ceramics

Ceramic (1–x)Ba(Ti1–yZry)O{sub 3} · xPbTiO{sub 3} (0 ≤ x, у ≤ 1) samples have been characterized by X-ray diffraction and dielectric measurements. The results have been used to map out the phase diagram of the system, which demonstrates the variation in the phase composition of the samples. It has been shown that, in the composition regions adjacent to the BaTiO{sub 3}–PbTiO{sub 3} side and BaZrO{sub 3} corner of the composition triangle, the samples consist of perovskite solid solutions that have tetragonal and cubic structures, respectively, at room temperature. In the intermediate composition region, the samples consist of different perovskite solid solutions similar in composition and structure. We have obtained composition dependences of the unit-cell symmetry and parameters for the solid solutions, their ferroelectric Curie temperature T{sub C}, characteristic dielectric relaxation temperatures, dielectric permittivity ε, and dielectric loss tangent tanδ (at temperatures from 100 to 800 K and frequencies from 25 to 106 Hz) and analyzed the evolution of their dielectric properties with increasing BaZrO{sub 3} content: from ferroelectric to properties of ferroelectric relaxors, reentrant relaxors, and dielectric relaxors of the dipole glass type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic thermal expansion and tunability of thermal expansion coefficient in Ni-substituted Co 2 V 2 O 7

Abstract Framework oxide materials are well-known for exhibiting not only negative thermal expansion (NTE), but also demonstrating thermal expansion that can be controlled using composition as a tuning parameter. In this work, we study the intrinsic thermal expansion properties of Co 2 V 2 O 7 , which has shown bulk linear NTE, and attempt to understand how substituting Ni 2+ for Co 2+ will affect the thermal expansion. The isomorphic solid solution is synthesized through solid-state methods and characterized using x-ray diffraction (XRD), diffuse reflectance spectroscopy, and neutron diffraction. The size difference between Ni 2+ and Co 2+ as well as the polyhedral volume of each Co 2+ metal coordination environment in the crystal structure allows Ni 2+ to partially be directed toward one crystallographic site over the other. Variable temperature synchrotron XRD data are employed to understand intrinsic thermal expansion. Across the solid solution, no intrinsic NTE is observed at the microscopic level, yet a degree of tunability in the thermal expansion coefficient with Ni substitution is demonstrated. The disparities between the intrinsic and bulk thermal expansion properties suggest that a morphological mechanism may have resulted in NTE in the bulk.

Materials Science↗

Structural investigations on Co{sub 3-x}Mn{sub x}TeO{sub 6}; (0 < x ≤ 2); High temperature ferromagnetism and enhanced low temperature anti-ferromagnetism

In the quest of materials with high temperature ferromagnetism and low temperature anti-ferromagnetism, we prepare Co{sub 3-x}Mn{sub x}TeO{sub 6}; (0 < x ≤ 2) solid solutions. Room temperature structural investigations on these solid solutions as a function of Mn concentration using Synchrotron X-ray diffraction (SXRD) and X-ray absorption near edge structure measurements in corroboration with magnetism are presented. Phase diagram obtained from Rietveld Refinement on SXRD data as a function of Mn concentration indicates doping disproportionate mixing of both monoclinic (C2/c) and rhombohedral (R 3{sup ¯}) structure for x < 0.5, while only R 3{sup ¯} structure for x ≥ 0.5. Further, it shows increase in both lattice parameters as well as average transition metal-oxygen (Co/Mn-O) bond lengths for x ≥ 0.5. Co and Mn K-edge XANES spectra reveal that both Co and Mn are in mixed oxidation state, Co{sup 2+}/Mn{sup 2+} and Co{sup 3+}/Mn{sup 3+}. Relative ratios of Co{sup 3+}/Co{sup 2+} and Mn{sup 3+}/Mn{sup 2+} obtained using Linear combination fit decrease with increasing x (for x ≥ 0.5). These structural and spectroscopic evidences are used to provide possible interpretation of the observed paramagnetic to ferromagnetic transition at around 185 K followed by an enhanced antiferromagnetic transition ∼45 K for x = 0.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase equilibria and crystal chemistry of the CaO–½Sm 2 O 3 –CoOz system at 885 °C in air

The CaO–½Sm 2 O 3 –CoOz system prepared at 885 °C in air consists of two calcium cobaltate compounds, namely, the 2D thermoelectric oxide solid solution, (Ca 3$-$x Sm x )Co 4 O 9$-$z (0 ≤ x ≤ 0.5) which has a misfit layered structure, and the 1D Ca 3 Co 2 O 6 which consists of chains of alternating CoO 6 trigonal prisms and CoO 6 octahedra. Ca 3 Co 2 O 6 was found to be a point compound without the substitution of Sm on the Ca site. A solid solution region of distorted perovskite, (Sm 1$-$x Ca x )CoO 3$-$z (0 ≤ x ≤ 0.22, space group Pnma) was established. The reported Sm 2 CoO 4 phase was not observed at 885 °C, but a ternary Ca-doped oxide, (Sm 1+x Ca 1$-$x )CoO 4$-$z (Bmab) where 0 < x ≤ 0.15 was found to be stable at this temperature. In the peripheral binary systems, Sm was not present in the Ca site of CaO, while a small solid solution region was identified for (Sm 1$-$x Ca x )O(3 $-$z)/2 (0 ≤ x ≤ 0.075). Lastly, ten solid solution tie-line regions and six three-phase regions were determined in the CaO–½Sm 2 O 3 –CoO z system in air.

36 MATERIALS SCIENCE↗

Special features of the excitation spectra and kinetics of photoluminescence of the Si{sub 1-x}Ge{sub x}:Er/Si structures with relaxed heterolayers

Luminescent properties of heteroepitaxial Si{sub 1-x}Ge{sub x}:Er/Si structures with relaxed heterolayers are studied. The results of combined studies of the excitation spectra and kinetics of photoluminescence (PL) are used to single out the components providing the largest contribution to the PL signal of the Si{sub 1-x}Ge{sub x}:Er/Si structures in the wavelength region of 1.54 {mu}m. It is shown that relaxation of elastic stresses in the Si{sub 1-x}Ge{sub x}:Er heterolayer affects only slightly the kinetic characteristics of erbium luminescence and manifests itself in insignificant contribution of the defects and defect-impurity complexes to the luminescent response of the Si{sub 1-x}Ge{sub x}:Er/Si structures. In the excitation spectra of the erbium PL, special features related to the possibility of the rare-earth impurity excitation at energies lower than the band gap of the Si{sub 1} {sub -x}Ge{sub x} solid solution are revealed. It is shown that a peak the width of which depends on the band gap of the solid solution and the extent of its relaxation is observed in the excitation spectra of the erbium-related PL in the Si{sub 1-x}Ge{sub x}:Er/Si structures in the wavelength region of 1040-1050 nm. The observed specific features are accounted for by involvement of intermediate levels in the band gap of the Si{sub 1-x}Ge{sub x}:Er solid solution in the process of excitation of an Er{sup 3+} ion.

36 MATERIALS SCIENCE↗

A study of microstructure of Fe-Cu-Ni-Sn and Fe-Cu-Ni-Sn-VN metal matrix for diamond containing composites

Highlights: • A nanocrystalline sample of coarse-grained powders of iron, copper, nickel, tin was obtained. • The structure of the sample consists of a supersaturated solid solution of nitrogen and vanadium in α-Fe. • Grain refinement occurs as a result of the decomposition of supersaturated solid solution of nitrogen and vanadium in α-Fe. To obtain bulk of 51Fe–32Cu–9Ni–8Sn and 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN nanocomposites, a pressing method at room temperature and subsequent hot pressing in a vacuum was used. The microstructure of the sintered composites by X-ray diffraction and transmission electron microscopy was investigated. It is shown that in the 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN composite there was a dissolution of vanadium nitride in γ‑iron and formation of a supersaturated solid solution of nitrogen and vanadium in the α‑iron. As a result, there was a substantial grinding of ferrite grains (from 5 to 50 μm to 20–400 nm) as compared to a sample without vanadium nitride (from 5 to 50 μm to 400–800 nm). Nanocomposites are considered as promising materials to create a new generation of diamond containing composites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Porous Tungsten from Tungsten–Cadmium Film Coatings

Solid solutions (alloys) with a Cd concentration of 50.3–76.3 at % were synthesized for the first time in the form of coatings by ion–plasma sputtering and codeposition of ultrafine W and Cd particles. When coatings were formed by tungsten and cadmium nanolayers, the components dissolved mutually to produce solid solutions of one metal in the other. A solid solution of cadmium in tungsten was synthesized at Cd concentrations up to 60.9 at %. At a cadmium concentration of 68.6 at % in the coating, the crystalline structure of cadmium with an admixture of amorphous tungsten was produced. At 800°C, tungsten evaporated from tungsten–cadmium coatings to form porous tungsten. The results of examination of materials fabricated on the basis of porous tungsten are planned to be used in practice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Aluminum Dissolved in Hematite on Formation of Calcium Ferrites at 1473 K

Silico-ferrite of calcium and aluminum (SFCA) is a primary bonding phase, which determines the quality of high basicity sinter used widely as raw materials in blast furnace ironmaking. Calcium ferrite containing aluminum (CFA) is a key precursor during the formation process of SFCA and is influenced by Al{sub 2}O{sub 3} content in iron ore fines. In this work, the experiment was conducted to investigate the effect of the aluminum occurrence state on the formation of calcium ferrite by the simulating sintering process of different types of aluminum-bearing hematite at 1473 K. X-ray diffraction, optical microscope, scanning electron microscopy, and energy-dispersive spectroscopy were used to characterize the mineral change in sintered samples. The result shows that the formation of CFA was promoted by both granular Al{sub 2}O{sub 3} wrapped in Fe{sub 2}O{sub 3} and aluminum dissolved in Fe{sub 2}O{sub 3} solid solution, especially for the latter, due to the formation of the CFA directly from the reaction between Fe{sub 2}O{sub 3}-Al{sub 2}O{sub 3} solid solution and CaO, and the aluminum content in CFA formed was influenced obviously by the solid solution amount of alumina into Fe{sub 2}O{sub 3} as raw materials.

36 MATERIALS SCIENCE↗

Role of f Electrons in the Optical and Photoelectrochemical Behavior of Ca(La 1– x Ce x ) 2 S 4 (0 ≤ x ≤ 1)

This study focuses on a solid solution series, Ca(La 1– x Ce x ) 2 S 4 (0 ≤ x ≤ 1), where the f electron density is absent in CaLa 2 S 4 and is progressively increased until it is maximized in CaCe 2 S 4 . Correspondingly, these samples, synthesized by a sealed ampule method, showed progressive variations in color ranging from gray for CaLa 2 S 4 to orange-red for CaCe 2 S 4 . The crystal structural nuances of both the end members and three solid solutions with $x$ = 0.25, 0.50, and 0.75 were established with the complementary use of synchrotron X-ray diffraction and neutron scattering. Interestingly, these data were consistent with a two-phase composition centered around each nominal solid solution stoichiometry. Optical characterization via diffuse reflectance spectroscopy and Tauc analyses showed a shrinking of the energy band gap (from the UV to vis range) when Ce was progressively introduced into the host CaLa 2 S 4 structure. Overall, these data were in concert with electronic band structure calculations, using density functional theory, which showed the progressive formation of an intermediate f band when Ce was introduced intro the structure. Photoelectrochemical measurements in an aqueous redox electrolyte, as well as surface photovoltage and Kelvin probe measurements, revealed all samples to be n-type semiconductors. The valence and conduction band edge positions of the end members and the three solid solutions could be mapped, on both the redox and vacuum reference energy scales, by combining these measurements with the optical data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase formation in the CaO–Al 2 O 3 –ZnO system as an analogue to CaO–Al 2 O 3 –MgO in spinel containing refractories

Recently, gahnite (ZnAl 2 O 4 ) is gaining attraction as a potential refractory ceramic because of the similarity of its structure and properties with those of magnesium aluminate (MgAl 2 O 4 ) spinel refractories. Formation of MgO and hibonite solid solution (CaMg x Al 12−x O 19−0.5x ; 0 ≤ x ≤ 0.18), CAM-I (Ca 2 Mg 2−3x Al 28+2x O 46 (0 ≤ x ≤ 0.3), and CAM-II (CaMg 2−3x Al 16+2x O 27 , 0 ≤ x ≤ 0.2) phases with platelet and interlocking microstructure in the CaO–Al 2 O 3 –MgO ternary system significantly enhances the high temperature mechanical properties of refractory castables. The CaO–Al 2 O 3 –ZnO ternary system has been studied, for the first time to our knowledge, in a selected compositional range with reference to the CaO–Al 2 O 3 –MgO system from 1650°C to 1700°C. The formation of ZnO and hibonite solid solution (CaZn x Al 12−x O 19−0.5x ; 0 < x < 0.18), CAZ-I (Ca 2 Zn 2−3x Al 28+2x O 46 ; 0 ≤ x ≤ 0.3), and CAZ-II (CaZn 2−3x Al 16+2x O 27 ; 0 ≤ x ≤ 0.2) phases with platelet and interlocking morphology have been found. The crystal structures and lattice parameters of ZnO and hibonite solid solution, CAZ-I, and CAZ-II are comparable, respectively, with MgO and hibonite solid solution, CAM-I, and CAM-II. Furthermore, CAZ-I and CAZ-II phases also form due to reaction between hibonite (CaO·6Al 2 O 3 ) and ZnAl 2 O 4 .

calcium aluminate cement↗

Synthesis of AlFeCuCrMg{sub x} (x = 0, 0.5, 1, 1.7) alloy powders by mechanical alloying

Novel AlFeCuCrMg{sub x} (x = 0, 0.5, 1, 1.7 mol) high-entropy alloys (HEAs) were synthesized by mechanical alloying. The effect of Mg content on the phase evolution of HEAs was investigated using X-Ray diffractometry (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED) pattern analysis. The particle morphology and composition of HEAs were investigated by scanning electron microscopy (SEM). Thermodynamic parameters were calculated and analyzed to explain the formation of a solid solution. XRD analysis revealed BCC as major phase and FCC as a minor phase in as-milled AlFeCuCr and AlFeCuCrMg{sub 0.5} HEAs. Also, XRD analysis of as-milled AlFeCuCrMg, AlFeCuCrMg{sub 1.7} confirmed the formation of two BCC phases (BCC 1 and BCC 2). TEM–SAED analysis of AlFeCuCrMg{sub x} HEAs concurred with XRD results. Microstructural features and mechanism for solid solution formation have been conferred in detail. Phase formation of the present HEAs has been correlated with calculated thermodynamic parameters. Differential thermal analysis (TGA-DTA) of these alloys confirmed that there is no substantial phase change up to 500 °C. - Highlights: • Novel AlFeCuCrMg{sub x} (x = 0, 0.5, 1, 1.7) HEAs were prepared by mechanical alloying. • Phase evolution and lattice parameter were studied by X-Ray Diffraction. • Crystallite size and lattice microstrain calculated failed to obey the Williamson–Hall method. • Criterions for formation of simple solid solution were compared to the thermodynamic parameters of the present HEAs. • Increase in the Mg concentration in AlMg{sub x}FeCuCr (x = 0, 0.5, 1, 1.7) HEAs supports the formation of BCC phase.

36 MATERIALS SCIENCE↗

Magnetic and absorbing properties of M-type substituted hexaferrites BaFe{sub 12–x}Ga{sub x}O{sub 19} (0.1 < x < 1.2)

X-ray powder diffraction is used to determine the unit cell parameters and to refine the crystal structure of the solid solutions of M-type hexagonal barium ferrite BaFe{sub 12–x}Ga{sub x}O{sub 19} (x = 0.1–1.2) with isostructural diamagnetic cation Ga{sup 3+} substitution at T = 300 K. As the level of substitution increases, the unit cell parameters are shown to decrease monotonically. The temperature (300 K ≤ T ≤ 750 K, H = 8.6 kOe) and field (T = 300 K,–20 kOe ≤ H ≤ 20 kOe) dependences of the saturation magnetization of these solid solutions are studied with a vibrating-sample magnetometer. The concentration dependences of the Curie temperature T{sub C}, the specific spontaneous magnetization, and the coercive force are plotted. The magnetic parameters are found to decrease with increasing substitution. The microwave properties of the solid solutions are analyzed in an external magnetic field (0 ≤ H ≤ 4 kOe). As the cation Ga{sup 3+} concentration increases from x = 0.1 to 0.6, the natural ferromagnetic resonance (NFMR) frequency decreases; as the concentration increases further to x = 1.2, this frequency again increases. As the cation Ga{sup 3+} concentration increases, the NFMR line width increases, which indicates a widening of the frequency range where electromagnetic radiation is intensely absorbed. Here, the resonance curve peak amplitude changes insignificantly. The shift of the NFMR frequency in an applied magnetic field is more pronounced for samples with low cation Ga{sup 3+} concentrations. The role of diamagnetic substitution is revealed, and the prospects and advantages of Ga-substituted beryllium hexaferrite as the material absorbing high-frequency electromagnetic radiation are demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Diffraction from Levitated Solids Under Extreme Conditions—Structure and Thermal Expansion in the Eu 2 O 3 –ZrO 2 System

The accurate determination of structure and thermal expansion of refractory materials at temperatures above 1500°C is challenging. Here, for the first time, we demonstrate the ability to reliably refine the structure and thermal expansion coefficient of oxides at temperatures to 2200°C using in situ synchrotron diffraction coupled with aerodynamic levitation. Solid solutions in the Eu 2 O 3 –ZrO 2 binary system were investigated, including the high‐temperature order–disorder transformation in Eu 2 Zr 2 O 7 . The disordered fluorite phase is found to be stable above 1900°C, and a reversible phase transition to the pyrochlore phase is noticed during cooling. Site occupancies in Eu 2 Zr 2 O 7 show a gradual increase in disorder on both cation and anion sublattices with increasing temperature. The thermal expansion coefficients of all cubic solid solutions are relatively similar, falling in the range 8.6–12.0 × 10 −6 C −1 . These studies open new vistas for in situ exploration of complex structural changes in high‐temperature materials.

Maram, Pardha S.↗