Structure of shock waves with nonequilibrium radiation and ionization.
Radiation emission and ionization in precursor and nonequilibrium region behind shock wave during approach to equilibrium in argon-like gas
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Radiation emission and ionization in precursor and nonequilibrium region behind shock wave during approach to equilibrium in argon-like gas
Calculation of laminar boundary layer shock wave interaction on cooled walls by method of integral relation
Surface pressures and shock wave shapes on sharp flat plates and wedges in rarefied hypersonic transition flow with emphasis on merged layer regime
Critical evaluation of analytic methods of predicting interaction between laminar boundary layer and impinging shock waves
Results of flow simulations of turbulent shock wave boundary layer interaction experiments performed in the LENS-II tunnel at CUBRC.
This grant is for the analysis of FUSE observations of particle acceleration in supernova remnant SN1006 shock waves. We have performed quick look analysis of the data, but because the source is faint and because the O VI emission lines on SN1006 are extremely broad, extreme care is needed for background subtraction and profile fitting. Moreover, the bulk of the analysis in will consist of model calculations. The Ly beta and O VI lines are clearly detected at the position in the NW filament of SN1006, but not in the NE position where non-thermal X-rays are strong. The lack of O VI emission in the NE places an upper limit on the pre-shock density there.
A study of the interaction of small amplitude, unsteady, freestream disturbances with a shock wave induced by a wedge in supersonic flow is presented. These disturbances may be acoustic waves, vorticity waves, or entropy waves (or indeed a combination of all three). Their interactions then generate behind the shock disturbances of all three classes, an aspect that is investigated in some detail, our motivation being to investigate possible mechanisms for boundary-layer receptivity, caused through the amplification and modification of freestream turbulence through the shock-body coupling. Also, the possibility of enhanced mixing owing to additional vorticity produced by the shock-body coupling is investigated.
A technique in which the evolution of a perturbation in a shock wave front is monitored as it travels through a sample is applied to granular materials. Although the approach was originally conceived as a way to measure the viscosity of the sample, here it is utilized as a means to probe the deviatoric strength of the material. Initial results for a tungsten carbide powder are presented that demonstrate the approach is viable. Simulations of the experiments using continuum and mesoscale modeling approaches are used to better understand the experiments. The best agreement with the limited experimental data is obtained for the mesoscale model, which has previously been shown to give good agreement with planar impact results. The continuum simulations indicate that the decay of the perturbation is controlled by material strength but is insensitive to the compaction response. Other sensitivities are assessed using the two modeling approaches. The simulations indicate that the configuration used in the preliminary experiments suffers from certain artifacts and should be modified to remove them. As a result, the limitations of the current instrumentation are discussed, and possible approaches to improve it are suggested.
Semiempirical expressions and conventional analyses agree within about 3 percent. Set of semiempirical formulas enables direct calculation of supersonic and hypersonic shock-wave parameters without use of iterative procedures. Formulas provided for calculating shock deflection angle and downstream static pressure and enthalpy over mach number range of 2 to 25. Relationship describing thermodynamic behavior of partially dissociated air also developed.
An experimental investigation of interference heating resulting from interactions of shock waves and turbulent boundary layers was conducted. Pressure and heat-transfer distributions were measured on a flat plate in the free stream and on the wall of the test section of the Langley Mach 6 high Reynolds number tunnel for Reynolds numbers ranging from 2 million to 400 million. Various incident shock strengths were obtained by varying a wedge-shock generator angle (from 10 deg to 15 deg) and by placing a spherical-shock generator at different vertical positions above the instrumented flat plate and tunnel wall. The largest heating-rate amplification factors obtained for completely turbulent boundary layers were 22.1 for the flat plate and 11.6 for the tunnel wall experiments. Maximum heating correlated with peak pressures using a power law with a 0.85 exponent. Measured pressure distributions were compared with those calculated using turbulent free-interaction pressure rise theories, and separation lengths were compared with values calculated by using different methods.
Vibrational relaxation of carbon monoxide in nozzle expansion flow and shock waves investigated by spectrophotometry
Time-dependant method for calculating supersonic blunt body flow fields with sharp corners and embedded shock waves
An approximate method to compute the maximum deformation and permanent set of a beam subjected to shock wave laoding in vacuo and in water was investigated. The method equates the maximum kinetic energy of the beam (and water) to the elastic plastic work done by a static uniform load applied to a beam. Results for the water case indicate that the plastic deformation is controlled by the kinetic energy of the water. The simplified approach can result in significant savings in computer time or it can expediently be used as a check of results from a more rigorous approach. The accuracy of the method is demonstrated by various examples of beams with simple support and clamped support boundary conditions.
A detailed Investigation of a flow in which a three-dimensional shock wave separates a two-dimensional turbulent boundary layer is presented. The resulting flowfield is highly three dimensional with a significant portion of flow separation on the surface at the phi = 0 deg (windward) plane was well as a large zone of secondary surface flow off this plane. Mean and fluctuating experimental measurements were obtained throughout the entire flowfield. These measurements included mean pressures, flow angles and shear on the surface, as well as yaw angles, static pressures, turbulent shear stresses, and turbulent kinetic energies on selected planes throughout the flowfield. In addition, numerical predictions of this flow, obtained by solving the Navier-Stokes equations with an algebraic eddy viscosity turbulence model, are presented. These computations reasonably predict both the surface and flowfield quantities, despite the extremely complicated nature of the experimental flow.
An assessment is presented for the experimental data on separated flow in shock wave turbulent boundary layer interactions at hypersonic and supersonic speeds. The data base consists mainly of two dimensional and axisymmetric interactions in compression corners or cylinder-flares, and externally generated oblique shock interactions with boundary layers over flat plates or cylindrical surfaces. The conditions leading to flow separation and the subsequent changes in the flow empirical correlations for incipient separation are reviewed. The effects of the Mach number, Reynolds number, surface cooling and the methods of detecting separation are discussed. The pertinent experimental data for the separated flow characteristics in separated turbulent boundary layer shock interaction are also presented and discussed.
Short-lived (about 15 min), low-energy proton increases associated with the passage of interplanetary shock waves have been previously reported. In the present paper, we have examined in a fine time scale (about 1 min) the concurrent particle and magnetic field data, taken by detectors on Explorer 34, for four of these events. Our results further support the view that these impulsive events are due to confinement of the solar cosmic-ray particles in the region just ahead (about 1,000,000 km) of the advancing shock front.
During the Helios mission a total of 391 fast forward non-corotating interplanetary shock waves was identified. For most of the 12 years between 1974 and 1986 unique shock detection was possible for more than 80 % of the time. The occurrence rate (in shocks per day) varied from 0.02 at activity minimum in 1976 to 0.17 in 1979 and 0.22 in 1982 with a significant drop to 0.13 in 1980, i.e. right at activity maximum. The average properties of all events as functions of solar distance. phase in the solar cycle, heliographic and -magnetic latitude and others are discussed.
In view of the possible effect of contamination of a plasma by metal particles on the operation of a number of facilities or on the detection of the motion of liners by Doppler methods, a particular attention has been recently focused on the problem of the ejection of particles from the shock-loaded free surface of a sample or on the “dusting” problem. Most information concerns the dusting source associated with the roughness of the surface, manufacturing technology, and the defectiveness and aging of a material. Factors affecting this process such as the profile and amplitude of the pressure on the front of the shock wave arriving at the free surface of the sample, the presence of the gas in front of the free surface, and the pressure in this gas are less studied.