Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scattering transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Spectral Radiative Properties of Polydispersed SiO 2 Particle Beds

The focus of this work is on the measurement and analysis of the radiative properties of polycrystalline SiO 2 particle beds with various layer thicknesses. The particles are polydispersed with average diameters of 222, 150, and 40 μm . The spectral, directional–hemispherical reflectance and transmittance of the particle bed are measured at wavelengths from 0.4 to 1.8 μm using a monochromator, and the reflectance measurement is extended to 15 μm using a Fourier-transform infrared spectrometer. Particles are closely packed between two transparent windows for measuring the radiative properties. In the visible and near-infrared region up to 1.8 μm, the inverse adding–doubling method yields the effective absorption and scattering coefficients. The results suggest that short wavelength absorption needs to be included in modeling the behavior of particle beds due to multiple scattering. A discrete-scale Monte Carlo ray-tracing method is developed to model the radiative properties by assuming monodispersed spherical particles, and the simulated results compare well with measurements. The effective absorption and scattering coefficients of the particle beds obtained from the independent scattering theory are compared to those from the inverse method. As a result, the impact of dependent scattering on the packed beds is observed for smaller-sized particles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRSDate not supplied

Photon Harvesting and Rocky Planet Biosignatures with 3D Climate Models

On the Earth solar photons are collected, sifted, and harvested by life at a scale that has transformed and defined the planet and continues to do so. That transformation is considered to be a key biosignature to look for in the rocky exoplanet population of our galaxy. However, the availability of photons on planetary surfaces depends on orbital and spin configuration as well as shadowing and scattering by clouds and other atmospheric phenomena. We are using a state-of-the-art 3D climate model (ROCKE-3D, Way et al. 2017) to study rocky planet surface irradiances and the implications for biosignatures and future missions such as the Habitable Worlds Observatory.

exoplanets↗
NASA NTRS2016

Polarized View of Supercooled Liquid Water Clouds

Supercooled liquid water (SLW) clouds, where liquid droplets exist at temperatures below 0 C present a well known aviation hazard through aircraft icing, in which SLW accretes on the airframe. SLW clouds are common over the Southern Ocean, and climate-induced changes in their occurrence is thought to constitute a strong cloud feedback on global climate. The two recent NASA field campaigns POlarimeter Definition EXperiment (PODEX, based in Palmdale, California, January-February 2013) and Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS, based in Houston, Texas in August- September 2013) provided a unique opportunity to observe SLW clouds from the high-altitude airborne platform of NASA's ER-2 aircraft. We present an analysis of measurements made by the Research Scanning Polarimeter (RSP) during these experiments accompanied by correlative retrievals from other sensors. The RSP measures both polarized and total reflectance in 9 spectral channels with wavelengths ranging from 410 to 2250 nm. It is a scanning sensor taking samples at 0.8deg intervals within 60deg from nadir in both forward and backward directions. This unique angular resolution allows for characterization of liquid water droplet size using the rainbow structure observed in the polarized reflectances in the scattering angle range between 135deg and 165deg. Simple parametric fitting algorithms applied to the polarized reflectance provide retrievals of the droplet effective radius and variance assuming a prescribed size distribution shape (gamma distribution). In addition to this, we use a non-parametric method, Rainbow Fourier Transform (RFT),which allows retrieval of the droplet size distribution without assuming a size distribution shape. We present an overview of the RSP campaign datasets available from the NASA GISS website, as well as two detailed examples of the retrievals. In these case studies we focus on cloud fields with spatial features varying between glaciated and liquid phases at altitudes as high as 10 km, which correspond to temperatures close to the homogeneous freezing temperature of pure water drops (about -35 C or colder). The multimodal droplet size distributions retrieved from RSP data in these cases are consistent with the multi-layer cloud structure observed by correlative Cloud Physics Lidar (CPL) measurements.

Clouds↗
DOE OSTI2016

SU-F-I-10: Spatially Local Statistics for Adaptive Image Filtering

Purpose: To facilitate adaptive image filtering operations, addressing spatial variations in both noise and signal. Such issues are prevalent in cone-beam projections, where physical effects such as X-ray scattering result in spatially variant noise, violating common assumptions of homogeneous noise and challenging conventional filtering approaches to signal extraction and noise suppression. Methods: We present a computational mechanism for probing into and quantifying the spatial variance of noise throughout an image. The mechanism builds a pyramid of local statistics at multiple spatial scales; local statistical information at each scale includes (weighted) mean, median, standard deviation, median absolute deviation, as well as histogram or dynamic range after local mean/median shifting. Based on inter-scale differences of local statistics, the spatial scope of distinguishable noise variation is detected in a semi- or un-supervised manner. Additionally, we propose and demonstrate the incorporation of such information in globally parametrized (i.e., non-adaptive) filters, effectively transforming the latter into spatially adaptive filters. The multi-scale mechanism is materialized by efficient algorithms and implemented in parallel CPU/GPU architectures. Results: We demonstrate the impact of local statistics for adaptive image processing and analysis using cone-beam projections of a Catphan phantom, fitted within an annulus to increase X-ray scattering. The effective spatial scope of local statistics calculations is shown to vary throughout the image domain, necessitating multi-scale noise and signal structure analysis. Filtering results with and without spatial filter adaptation are compared visually, illustrating improvements in imaging signal extraction and noise suppression, and in preserving information in low-contrast regions. Conclusion: Local image statistics can be incorporated in filtering operations to equip them with spatial adaptivity to spatial signal/noise variations. An efficient multi-scale computational mechanism is developed to curtail processing latency. Spatially adaptive filtering may impact subsequent processing tasks such as reconstruction and numerical gradient computations for deformable registration. NIH Grant No. R01-184173.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Electron scattering mechanisms in Cu-Mn films for interconnect applications

Electrical properties and corresponding structural features of Cu-Mn alloy films with potential application as barrier and interconnect layers were studied. Cu-Mn films were deposited by DC magnetron sputtering at room temperature on SiO{sub 2} substrates. Electrical resistivity measurements were made as a function of film composition and temperature. The specific resistivity varies linearly with the Mn content showing a maximum of 205 μΩcm at 80 at. % Mn. The temperature coefficient of resistance (TCR) of all alloy films is low, showing non-metallic conductivity for most compositions. Also a minimum TCR has been observed in the 40–80 at. % Mn range which was attributed to a magnetic transformation around 200–300 K. Electrical resistivity measurements are correlated with the film structure revealed by transmission electron microscopy to clarify the phase regions throughout the composition range. In the 20–40 at. % and 70–80 at. % Mn ranges, two-phase structures were identified, where Cu- or Mn-rich solid solution grains were surrounded by a thin amorphous covering layer. Based on the revealed phase regions and morphologies electron scattering mechanisms in the system were evaluated by combining the Matthiessen's rule and the Mayadas-Schatzkes theory. Grain boundary reflectivity coefficients (r = 0.6–0.8) were calculated from fitting the model to the measurements. The proposed model indicates that, in a binary system, the special arrangement of the two phases results in new scattering mechanisms. The results are of value in optimizing the various parameters needed to produce a suitable barrier layer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Resolving extreme jet substructure

We study the effectiveness of theoretically-motivated high-level jet observables in the extreme context of jets with a large number of hard sub-jets (up to N = 8). Previous studies indicate that high-level observables are powerful, interpretable tools to probe jet substructure for N ≤ 3 hard sub-jets, but that deep neural networks trained on low-level jet constituents match or slightly exceed their performance. We extend this work for up to N = 8 hard sub-jets, using deep particle-flow networks (PFNs) and Transformer based networks to estimate a loose upper bound on the classification performance. A fully-connected neural network operating on a standard set of high-level jet observables, 135 N-subjetiness observables and jet mass, reach classification accuracy of 86.90%, but fall short of the PFN and Transformer models, which reach classification accuracies of 89.19% and 91.27% respectively, suggesting that the constituent networks utilize information not captured by the set of high-level observables. We then identify additional high-level observables which are able to narrow this gap, and utilize LASSO regularization for feature selection to identify and rank the most relevant observables and provide further insights into the learning strategies used by the constituent-based neural networks. The final model contains only 31 high-level observables and is able to match the performance of the PFN and approximate the performance of the Transformer model to within 2%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Identification of Common Types of Plastics by Vibrational Spectroscopic Techniques

Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), Polyvinyl Chloride (PVC), Low-Density Polyethylene (LDPE), Polypropylene (PP), and Polystyrene (PS) account for most plastic use worldwide, with production nearing 380 million tons annually. A considerable portion enters municipal solid waste and landfills, creating long-term environmental concerns. Scaling recycling operations requires automated sorting technologies, with spectroscopy and machine learning offering promising solutions. In this study, a six-class convolutional neural network (CNN) was developed for plastic identification using vibrational spectroscopies. Raman Scattering (RS) spectra collected from recycling samples enabled accurate chemical differentiation while assessing the influence of visible features such as color. A CNN trained on RS data achieved 100% classification accuracy. To strengthen field applicability, Attenuated Total Reflectance–Fourier Transform Infrared (ATR-FTIR) spectroscopy was incorporated, achieving 95% accuracy with a similar CNN model. These findings demonstrate the potential of integrating spectroscopy with deep learning for reliable plastic classification, advancing development of scalable, field-ready recycling technologies.

Garcia Tovar, Maria P.↗
DOE OSTI2024

Imaging interfacial topography with coherent x-ray reflectivity

The use of coherent x-ray reflectivity to image interfaces is illustrated using model calculations for three cases: a thin film, a semi-infinite substrate, and a coherently strained epitaxial thin film. The intensities and phases of the coherent scattering signals are calculated based on a fully atomistic model (where the phases are assumed to have been recovered by a phasing algorithm). Here, we describe the characteristics of the effective density that are obtained by direct inverse Fourier transformation of the complex structure factors, using a window function to define the data range. These effective densities include significant artifacts like oscillations and negative values derived from the finite vertical momentum transfer of the window function. Two approaches are described to extract the surface topography from the effective densities for three-dimensional visualization: (i) multiplying the effective density by a phase factor and (ii) analyzing the data as a hybrid structure factor F(x, Q z ). The explicit surface sensitivity and specificity of measurements is illustrated when the film or substrate Bragg peaks are excluded. These considerations show that images of interfacial topography can be obtained using currently available experimental capabilities with parameters corresponding to epitaxial thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Symmetry-driven phonon chirality and transport in one-dimensional and bulk B a 3 N -derived materials

Symmetry and dimensionality are essential factors defining lattice dynamics and conductivity (κ). Here, we critically examine these via ab initio Boltzmann transport applied to single chain and bulk electride Ba 3 N and Ba 3 NX ( X = Sb,Bi). Chiral phonons in one-dimensional chains obey new symmetry-based scattering rules that limit thermal resistance. Weak chain coupling breaks these in the bulk, giving lower κ and large κ anisotropy. Curiously, intercalation of large X atoms binds chains more strongly, reducing the volume, yet gives lower κ and transforms the electronic behavior. As a result, insights developed here can be more generally applied to other materials and provide avenues for predictive materials design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Observation of double J / ψ meson production in p Pb collisions at s NN = 8.16 TeV

The first observation of the concurrent production of two J / ψ mesons in proton-nucleus collisions is presented. The analysis is based on a proton-lead ( p Pb ) data sample recorded at a nucleon-nucleon center-of-mass energy of 8.16 TeV by the CMS experiment at the CERN LHC and corresponding to an integrated luminosity of 174.6 nb − 1 . The two J / ψ mesons are reconstructed in their μ + μ − decay channels with transverse momenta p T > 6.5 GeV and rapidity | y | < 2.4 . Events where one of the J / ψ mesons is reconstructed in the dielectron channel are also considered in the search. The p Pb → J / ψ J / ψ + X process is observed with a significance of 5.3 standard deviations. The measured inclusive fiducial cross section, using the four-muon channel alone, is σ ( p Pb → J / ψ J / ψ + X ) = 22.0 ± 8.9 ( stat ) ± 1.5 ( syst ) nb . A fit of the data to the expected rapidity separation for pairs of J / ψ mesons produced in single (SPS) and double (DPS) parton scatterings yields σ SPS p Pb → J / ψ J / ψ + X = 16.5 ± 10.8 ( stat ) ± 0.1 ( syst ) nb and σ DPS p Pb → J / ψ J / ψ + X = 5.4 ± 6.2 ( stat ) ± 0.4 ( syst ) nb , respectively. This latter result can be transformed into a lower bound on the effective DPS cross section, closely related to the squared average interparton transverse separation in the collision, of σ eff > 1.0 mb at 95% confidence level. © 2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Data Repository for Power system Open models With Evolving Resources (DR POWER) (Final Scientific/Technical Report)

Pacific Northwest National Laboratory (PNNL) and the National Rural Electric Cooperative Association (NRECA) created a Data Repository for Power system Open models With Evolving Resources (DR POWER) to establish, curate, and evolve open-access power grid models and scenarios, and measurements and observations, collectively referred to as datasets. Existing open-access datasets are inadequate (too small and not representative of the complexity of the modern grid, and scattered all over the world wide web) for the investigation and benchmarking of the advanced optimization methods needed for next-generation grids. Open-access datasets are static and inadequate in other aspects: they do not provide format transformation tools; there is missing information needed for advanced applications; hard to cite; no model evolution history; difficult to update current collections; and little to no community involvement and feedback. Overall, the current landscape is hindering model evolution and benchmarking standards needed for transformational approaches to be developed, tested, and accepted by the power modeling community.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1986

Comet Giacobini-Zinner - In situ observations of energetic heavy ions

Conclusive evidence is presented for the existence of heavy energetic, singly charged cometary ions within 1.5 million km of comet Giacobini-Zinner. The most direct evidence for establishing the mass of these ions was obtained from an analysis of the energy signals in one of the solid state detector on board the International Cometary Explorer. Maximum fluxes were recorded approximately one hour before and after closest approach to the cometary nucleus. Transformation of the particle angular distribution observed at approximately 50,000 km radial distance from the comet, during the inbound pass into a rest frame in which the distributions are nearly isotropic, requires a transformation velocity that is consistent with the local solar wind velocity (assuming these particles are primarily singly ionized with a mass of 18 + or - 6 amu). It is implied that these water-group ions underwent strong pitch angle scattering subsequent to ionization and that they were accelerated or heated. The derived ion density, approximately 0.1/cu cm, is consistent with a crude model for the production and transport of pickup ions.

Ipavich, F. M.↗
NASA NTRS2001

The Vitrification and Determination of the Crystallization Time Scales of a Zr58.5Nb2.8Cu15.6Ni12.8Al10.3 Bulk Metallic Glass Forming Liquid

Zr58.5Nb2.8Cul5.6Nil2.8All0.3 is the first bulk glass forming liquid that does not contain beryllium to be vitrified by purely radiative cooling in the containerless electrostatic levitation process. The measured critical cooling rate is 1.75 K/s. The sluggish crystallization kinetics enable the determination of the time-temperature-transformation (TTT) diagram between the liquidus and the glass transition temperatures. At the nose of the TTT diagram, the shortest time to reach crystallization in an isothermal experiment is 32 seconds. In contrast to other bulk metallic glasses the scatter in the crystallization onset times are small at both high and low temperatures.

Hays, C. C.↗
DOE OSTI2022

MEASUREMENT OF THE GENERALIZED POLARIZABILITIES OF THE PROTON IN VIRTUAL COMPTON SCATTERING

Understanding how the visible matter in the universe arises from its elementary quark and gluon constituents is a central question for science. The visible world is founded on the proton, the only composite building block of matter that is stable in nature. Consequently, understanding the formation of matter relies on explaining the dynamics and the properties of the proton?s bound state. A fundamental property of the proton involves the system?s response to an external electromagnetic (EM) field. It is characterized by the EM polarizabilities that describe how easily the charge and magnetization distributions inside the system are distorted by the EM field. When the polarizabilities are generalized to finite momentum transfer, their Fourier transform can map out the spatial distribution of the polarization densities in a proton subject to an EM field. This thesis focuses on the measurement of the proton generalized polarizabilities (GPs) at low four-momentum transfer in experimental Hall C at the Thomas Jefferson National Accelerator Facility (TJNAF). Among the six independent GPs, we will focus on the electric (aE1) and the magnetic (bM1) scalar GPs. The GPs can be accessed through measurements of the Virtual Compton Scattering reaction, by replacing the incoming real photon of the Compton scattering process with a space-like virtual photon. The outgoing real photon provides the EM perturbation to the system. In addition, the Dispersion Relation Formalism is used for generalized polarizability extraction. In this work, the two scalar GPs measured with unprecedented precision, and the measurements help explore a momentum transfer region where an anomalous enhancement of the electric GP that contradicts the predictions of nuclear theory has been observed.

Li, Ruonan↗
DOE OSTI2015

Crystallographic orientation variation of isothermal pearlite under high magnetic field

Crystallographic orientation (CO) variation of magnetic-induced pearlite (MIP) during its microstructure evolution in 19.8 T was investigated by electron back-scatter diffraction (EBSD). It is closely related to the isothermal temperatures (ITs) and the applied magnetic time (MT) during the process of MIP formation. The <100> easy magnetization direction in MIP colonies is strengthened with the MT within the certain transformed fraction of MIP (f{sub MIP}) at the relatively lower IT (983 K) above the eutectoid temperature but below the magnetically shifted upward eutectoid temperature, while this special CO tends to be weakened at a relatively higher IT (995 K). For the same MT, the higher the IT, the relatively larger is the proportion in <100> orientation for MIP colonies at the early growth stage. These results have demonstrated that the change of <100> orientation of MIP is closely related to the growth rate of pearlite ferrite (PF), and strengthened mainly at early transformation stage. When f{sub MIP} reaches some value, the growth rate of MIP at other COs, such as <110>, even at the hard magnetization direction, turns to present speed-up. - Highlights: • HMF can induce pearlite with different fractions above the eutectoid temperature. • CO is closely related to isothermal temperatures and applied magnetic time. • <100> direction is related to the growth rate of PF, and strengthened at early stage. • When f{sub MIP} reaches some value, the growth rate at other COs turns to present speed-up.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chaos in inhomogeneous neutrino fast flavor instability

In dense neutrino gases, the neutrino-neutrino coherent forward scattering gives rise to a complex flavor oscillation phenomenon not fully incorporated in simulations of neutron star mergers (NSM) and core collapse supernovae (CCSNe). Moreover, it has been proposed to be chaotic, potentially limiting our ability to predict neutrino flavor transformations in simulations. To address this issue, we explore how small flavor perturbations evolve in the nonlinear regime of the neutrino quantum kinetic equation within a narrow centimeter-scale region inside a NSM and a toy neutrino distribution. Our findings reveal that paths in the flavor state space of solutions with similar initial conditions diverge exponentially, exhibiting chaos. This inherent chaos makes the microscopic scales of neutrino flavor transformations unpredictable. However, the domain-averaged neutrino density matrix remains relatively stable, with chaos minimally affecting it. This particular property suggests that domain-averaged quantities remain reliable despite the exponential amplification of errors. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
NASA NTRS1984

Techniques for the estimation of leaf area index using spectral data

Based on the radiative transport theory of a homogeneous canopy, a new approach for obtaining transformations of spectral data used to estimate leaf area index (LAI), is developed. The transformations which are obtained without any ground knowledge of LAI show low sensitivity to soil variability, and are linearly related to LAI with relationships which are predictable from leaf reflectance, transmittance properties, and canopy reflectance models. Evaluation of the SAIL (scattering by arbitrarily inclined leaves) model is considered. Using only nadir view data, results obtained on winter and spring wheat and corn crops are presented.

Badhwar, G. D.↗