Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regional models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Cassini Observations of Saturn's Dawn-Magnetotail Region and their Relation to Models of Saturn's Aurora: Preliminary Results

Using Cassini plasma and magnetic field observations from the dawn meridian of Saturn s outer magnetosphere to Saturn s magnetotail region, we investigate the applicability of the centrifugal instability model by Sittler et al. [2006] for Saturn s auroral response to the solar wind, versus the reconnection model of Saturn s aurora by Cowley et al. [2005]. We use Cassini Plasma Spectrometer (CAPS) Ion Mass Spectrometer (IMS) and Electron Plasma Spectrometer (ELS) observations to characterize the plasma environment. ELS and magnetometer observations are used to map out the morphology of the outer magnetosphere from dawn to midnight local time. IMS observations are used to measure plasma flow velocities from which one can infer rotation versus convective flows. IMS composition measurements are used to trace the source of plasma from the inner magnetosphere (protons, H2 and water group ions) versus an external solar wind source (protons and Heff ions). A critical parameter for both models is the strength of the convection electric field with respect to the rotational electric field for the large scale magnetosphere. Is there a significant return flow from the magnetotail? Pitch angle distributions also play an important role as a discriminator. If the magnetosphere tends to conserve angular momentum as suggested by Sittler et al. [2006], then we expect to see an anti-correlation between rotational flow component and radial flow velocities. All will be investigated.

Sittler, E. C.↗
DOE OSTI2025

Lake Huron Enhances Snowfall Downwind of Lake Erie: A Modeling Study of the 2010 New Year’s Lake Effect Snowfall Event

In the Northeast and Great Lakes regions of the United States, the influence of multiple lakes on the overlying air can greatly affect lake-effect snowfall over downwind communities. To assess the impact of Lake Huron on snowfall downwind of Lake Erie, we simulated a lake-effect snow event which occurred from 1 to 6 January 2010 using the Regional Atmospheric Modeling System (RAMS). We found that the presence of Lake Huron enhances snowfall downwind of Lake Erie by almost 20% and leads to much heavier local snowfall totals than when Lake Huron is not present. This increase in snowfall is due to a lake-to-lake (L2L) convective band, as secondary circulations associated with lake-effect convection form over Lake Huron and persist overland between the lakes before reintensifying over Lake Erie. As these secondary circulations move over Lake Erie, lifting within the upward branch of the circulations accelerates the development of convection within the L2L band. Surface fluxes and convection over Lake Huron deepen the boundary layer, promoting deeper vertical development of this L2L band over Lake Erie. However, although this boundary layer modification strengthens the L2L band, we found that it actually reduced lake-effect snowfall produced by wind-parallel bands (WPB) in other parts of the lake. This indicates that boundary layer modification from upstream lakes may impact L2L bands differently than WPB which are not connected to upstream secondary circulations.

Lake effects↗
DOE OSTI2022

Toward Better Understanding of Microphysical Processes and Resulting Precipitation Physics: A Merger Of Observations and Cloud Models (Final Report)

A large database of global disdrometer observations and a diverse set of simulations from the Regional Atmospheric Modeling System (RAMS) were compared using principal component analysis (PCA) in order to better understand warm and ice-based precipitation processes. The analysis demonstrated that six distinct precipitation groups (PGs) with common characteristics were revealed in both the observations and model simulations. These PGs were defined by similar co-variability of rain parameters. However, the model showed large concentrations of drops with a given size compared to the observations. Detailed investigations determined the parameterization of drop breakup was forcing the drops to an equilibrium size with a stronger constraint than was indicated by the observations. A series of sensitivity studies permutating the rain shape parameter in the RAMS 2-moment bulk scheme demonstrated how the assumed shape of the rain distribution influences the microphysics as well as precipitation characteristics. Results were compared to the same simulations performed with a bin microphysics scheme where the rain shape parameter is freely evolving. In the bin scheme, a wide range of shape parameters were found, with horizontal and vertical variability, in addition to being a function of storm lifetime. The results of this study highlight the limitations of a fixed assumed rain distribution in 2-moment microphysics schemes. Model simulations were used to probe the microphysical origins of the six PGs. Rain budgets from a supercell case showed that several of the groups hypothesized to be associated with strong ice microphysical processes had significant contributions from melting hail, but the complexity of ice and warm-rain processes in the supercell precluded definitive determination of microphysical origins for many of the PGs. A case study from the Mid-latitude Continental Convection and Clouds Experiment (MC3E) compared the model PGs to disdrometer observations, and demonstrated the spatial and temporal variability of the PGs which is not possible from disdrometer point measurements alone. The analyses performed during this project demonstrated how statistical analysis can provide a robust method for comparing model simulations and observations, which ultimately resulted identification of limitations in some current microphysics parameterizations as well as insights into precipitation variability which ultimately benefits both observations and modeling efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Examining the Robustness of Weakened Orographic Influence on Precipitation in Downscaled Climate Projections Over the Western US

Assessing local climate change impacts often requires downscaling coarse global climate model (GCM) output to finer resolution. Two main approaches exist: dynamical downscaling using high-resolution regional climate models, and statistical downscaling based on historical relationships between large-scale and local variables. In a recent analysis of five dynamically downscaled simulations over the western United States, Koszuta et al. (2024, https://doi.org/10.1029/2023gl107298) found that warming weakens orographic influence on winter precipitation, damping increases on windward slopes and amplifying them in rain-shadowed regions. Here we show that this effect is robust across seasons and multiple dynamically downscaled ensembles, and is more pronounced at higher model resolutions. However, it is absent in projections from a widely used statistical model (LOCA2), even when trained on high-resolution future simulations (LOCA2-Hybrid). This highlights a key limitation of many statistical downscaling methods: their preservation of parent GCM trends, which usually fail to capture emergent changes in orographic precipitation patterns.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Estimating forest productivity with Thematic Mapper and biogeographical data

Spectral data from the Landsat Thematic Mapper (TM) on three forest exosystems (the southern Illinois, the Great Smoky Mountains regions in Tennessee and North Carolina, and the central Adirondack Mountains in New York) were used in conjunction with ground-collected measures of forest productivity and such information as the area's slope, aspect, elevation, and soil and vegetation types, to develop models of regional forest productivity. It is shown that the models developed may be used to estimate the productivity of a region with a high degree of confidence, but that the reliability of single-pixel estimates is poor. The characteristics of a given ecosystem determine which spectral values are most closely related to forest productivity. Thus, mid-IR, NIR, and visible bands are most significant in Illinois and New York, while the thermal band is relatively more important in the Smokies.

Cook, Elizabeth A.↗
DOE OSTI2025

CMIP6-based Dynamically Downscaled Hydroclimate Projection over the Conterminous US

This dataset presents a suite of downscaled hydro-climate projections over the conterminous United States (CONUS) based on multiple selected Global Climate Models (GCMs) from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled dynamically using Regional Climate Model version 4 (RegCM4). Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. This dataset is formulated to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details on this dataset, please refer to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗
NASA NTRS1992

Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener

This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener.

Wang, J. T.↗
NASA NTRS2012

Use NU-WRF and GCE Model to Simulate the Precipitation Processes During MC3E Campaign

One of major CRM approaches to studying precipitation processes is sometimes referred to as "cloud ensemble modeling". This approach allows many clouds of various sizes and stages of their lifecycles to be present at any given simulation time. Large-scale effects derived from observations are imposed into CRMs as forcing, and cyclic lateral boundaries are used. The advantage of this approach is that model results in terms of rainfall and QI and Q2 usually are in good agreement with observations. In addition, the model results provide cloud statistics that represent different types of clouds/cloud systems during their lifetime (life cycle). The large-scale forcing derived from MC3EI will be used to drive GCE model simulations. The model-simulated results will be compared with observations from MC3E. These GCE model-simulated datasets are especially valuable for LH algorithm developers. In addition, the regional scale model with very high-resolution, NASA Unified WRF is also used to real time forecast during the MC3E campaign to ensure that the precipitation and other meteorological forecasts are available to the flight planning team and to interpret the forecast results in terms of proposed flight scenarios. Post Mission simulations are conducted to examine the sensitivity of initial and lateral boundary conditions to cloud and precipitation processes and rainfall. We will compare model results in terms of precipitation and surface rainfall using GCE model and NU-WRF

Tao, Wei-Kuo↗
DOE OSTI2024

Atmospheric-river-induced precipitation in California as simulated by the regionally refined Simple Convective Resolving E3SM Atmosphere Model (SCREAM) Version 0

Abstract. Using the regionally refined mesh (RRM) configuration of the US Department of Energy's Simple Cloud-Resolving Energy Exascale Earth System Model (E3SM) Atmosphere Model (SCREAM), we simulate and evaluate four meteorologically distinct atmospheric river events over California. We test five different RRM configurations, each differing in terms of the areal extent of the refined mesh and the resolution (ranging from 800 m to 3.25 km). We find that SCREAM RRM generally has a good representation of the AR-generated precipitation in CA, even for the control simulation which has a very small 3 km refined patch, and is able to capture the fine-scale regional distributions that are controlled largely by the fine-scale topography of the state. It is found that SCREAM generally has a wet bias over topography, most prominently over the Sierra Nevada mountain range, with a corresponding dry bias on the lee side. We find that refining the resolution beyond 3 km (specifically 1.6 km and 800 m) has virtually no benefit towards reducing systematic precipitation biases but that improvements can be found when increasing the areal extent of the upstream refined mesh. However, these improvements are relatively modest and only realized if the size of the refined mesh is expanded to the scale where employing RRM no longer achieves the substantial cost benefit it was intended for.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2011

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model to Evaluate Juniperus spp. Pollen Phenology and Dispersal

Pollen can be transported great distances. Van de Water et. al. reported Juniperus spp. pollen was transported 200-600 km. Hence local obse rvations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data produ cts to identify source regions and quantities of dust. We are modifyi ng the DREAM model to incorporate pollen transport. Pollen release wi ll be estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observations records of pollen release timing and quantities will be used as verification. This information will be used to support the Centers for Disease Control and Prevention?s Nat ional Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, Jeffrey C.↗
NASA NTRS1995

Diabatic forcing and intialization with assimilation of cloud water and rainwater in a forecast model

In this study, diabatic forcing, and liquid water assimilation techniques are tested in a semi-implicit hydrostatic regional forecast model containing explicit representations of grid-scale cloud water and rainwater. Diabatic forcing, in conjunction with diabatic contributions in the initialization, is found to help the forecast retain the diabatic signal found in the liquid water or heating rate data, consequently reducing the spinup time associated with grid-scale precipitation processes. Both observational Special Sensor Microwave/Imager (SSM/I) and model-generated data are used. A physical retrieval method incorporating SSM/I radiance data is utilized to estimate the 3D distribution of precipitating storms. In the retrieval method the relationship between precipitation distributions and upwelling microwave radiances is parameterized, based upon cloud ensemble-radiative model simulations. Regression formulae relating vertically integrated liquid and ice-phase precipitation amounts to latent heating rates are also derived from the cloud ensemble simulations. Thus, retrieved SSM/I precipitation structures can be used in conjunction with the regression-formulas to infer the 3D distribution of latent heating rates. These heating rates are used directly in the forecast model to help initiate Tropical Storm Emily (21 September 1987). The 14-h forecast of Emily's development yields atmospheric precipitation water contents that compare favorably with coincident SSM/I estimates.

Raymond, William H.↗
NASA NTRS2021

Evaluating the Impact of Model Resolutions and Cumulus Parameterization on Precipitation in NU-WRF: A Case Study in the Central Great Plains

Regional climate models are expected to exhibit improved skill at finer spatial resolutions due to improved representation of land surface heterogeneity. However, at spatial scales between 1 to 10 km (grey scales), these improvements are often illusive due to the competing benefits from spatial resolution and cumulus parameterization. This study provides insights into the impact of model resolution and cumulus parameterization on precipitation prediction in the Central Great Plains by using an object-based evaluation method. Our results show limited improvement solely from finer resolution but larger improvement without using the cumulus scheme at a 4-kmresolution. Compared to traditional evaluation methods, the object-based analysis shows that without the cumulus scheme the spatial properties of precipitation are better represented. In contrast, all model configurations show a dry bias in precipitation days and a tendency to produce widespread precipitation but with fewer hours with precipitationwhich indicates other shortcomings in the model.

Yuqi Zhang↗
DOE OSTI2021

Coupling of regional geophysics and local soil-structure models in the EQSIM fault-to-structure earthquake simulation framework

Accurate understanding and quantification of the risk to critical infrastructure posed by future large earthquakes continues to be a very challenging problem. Earthquake phenomena are quite complex and traditional approaches to predicting ground motions for future earthquake events have historically been empirically based whereby measured ground motion data from historical earthquakes are homogenized into a common data set and the ground motions for future postulated earthquakes are probabilistically derived based on the historical observations. This procedure has recognized significant limitations, principally due to the fact that earthquake ground motions tend to be dictated by the particular earthquake fault rupture and geologic conditions at a given site and are thus very site-specific. Historical earthquakes recorded at different locations are often only marginally representative. There has been strong and increasing interest in utilizing large-scale, physics-based regional simulations to advance the ability to accurately predict ground motions and associated infrastructure response. However, the computational requirements for simulations at frequencies of engineering interest have proven a major barrier to employing regional scale simulations. In a U.S. Department of Energy Exascale Computing Initiative project, the EQSIM application development is underway to create a framework for fault-to-structure simulations. This framework is being prepared to exploit emerging exascale platforms in order to overcome computational limitations. This article presents the essential methodology and computational workflow employed in EQSIM to couple regional-scale geophysics models with local soil-structure models to achieve a fully integrated, complete fault-to-structure simulation framework. Here, the computational workflow, accuracy and performance of the coupling methodology are illustrated through example fault-to-structure simulations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Future Changes in Snowpack, Snowmelt, and Runoff Potential Extremes Over North America

Snowpack and snowmelt-driven extreme events (e.g., floods) have large societal consequences including infrastructure failures. However, it is not well understood how projected changes in the snow-related extremes differ across North America. Using dynamically downscaled regional climate model (RCM) simulations, we found that the magnitudes of extreme snow water equivalent, snowmelt, and runoff potential (RP; snowmelt plus precipitation) decrease by 72%, 73%, and 45%, respectively, over the continental United States and southern Canada but increase by up to 8%, 53%, and 41% in Alaska and northern Canada by the late 21st century. In California and the Pacific Northwest, there is a notable increase in extreme RP by 21% contrary to a decrease in snowmelt by 31% by the late century. These regions could be vulnerable to larger rain-on-snow floods in a warmer climate. Regions with a large variability among RCM ensembles are identified, which require further investigation to reduce the regional uncertainties.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

Antarctic Ice Shelf Thickness Change from Multimission Lidar Mapping

We calculate rates of ice thickness change and bottom melt for ice shelves in West Antarctica and the Antarctic Peninsula from a combination of elevation measurements from NASA–CECS Antarctic ice mapping campaigns and NASA Operation IceBridge corrected for oceanic processes from measurements and models, surface velocity measurements from synthetic aperture radar, and high-resolution outputs from regional climate models. The ice thickness change rates are calculated in a Lagrangian reference frame to reduce the effects from advection of sharp vertical features, such as cracks and crevasses, that can saturate Eulerian-derived estimates. We use our method over different ice shelves in Antarctica, which vary in terms of size, repeat coverage from airborne altimetry, and dominant processes governing their recent changes. We find that the Larsen-C Ice Shelf is close to steady state over our observation period with spatial variations in ice thickness largely due to the flux divergence of the shelf. Firn and surface processes are responsible for some short-term variability in ice thickness of the Larsen-C Ice Shelf over the time period. The Wilkins Ice Shelf is sensitive to short-timescale coastal and upper-ocean processes, and basal melt is the dominant contributor to the ice thickness change over the period. At the Pine Island Ice Shelf in the critical region near the grounding zone, we find that ice shelf thickness change rates exceed 40m/yr, with the change dominated by strong submarine melting. Regions near the grounding zones of the Dotson and Crosson ice shelves are decreasing in thickness at rates greater than 40m/yr, also due to intense basal melt. NASA–CECS Antarctic ice mapping and NASA Operation IceBridge campaigns provide validation datasets for floating ice shelves at moderately high resolution when coregistered using Lagrangian methods.

Sutterley, Tyler C.↗
DOE OSTI2024

Machine Learning Classification Strategy to Improve Streamflow Estimates in Diverse River Basins in the Colorado River Basin

Streamflow in the Colorado River Basin (CRB) is significantly altered by human activities including land use/cover alterations, reservoir operation, irrigation, and water exports. Climate is also highly varied across the CRB which contains snowpack-dominated watersheds and arid, precipitation-dominated basins. Recently, machine learning methods have improved the generalizability and accuracy of streamflow models. Previous successes with LSTM modeling have primarily focused on unimpacted basins, and few studies have included human impacted systems in either regional or single-basin modeling. We demonstrate that the diverse hydrological behavior of river basins in the CRB are too difficult to model with a single, regional model. We propose a method to delineate catchments into categories based on the level of predictability, hydrological characteristics, and the level of human influence. Lastly, we model streamflow in each category with climate and anthropogenic proxy data sets and use feature importance methods to assess whether model performance improves with additional relevant data. Overall, land use cover data at a low temporal resolution was not sufficient to capture the irregular patterns of reservoir releases, demonstrating the importance of having high-resolution reservoir release data sets at a global scale. On the other hand, the classification approach reduced the complexity of the data and has the potential to improve streamflow forecasts in human-altered regions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

Selection of a Representative Subset of Global Climate Models that Captures the Profile of Regional Changes for Integrated Climate Impacts Assessment

We present the Representative Temperature and Precipitation (T&P) GCM Subsetting Approach developed within the Agricultural Model Intercomparison and Improvement Project (AgMIP) to select a practical subset of global climate models (GCMs) for regional integrated assessment of climate impacts when resource limitations do not permit the full ensemble of GCMs to be evaluated given the need to also focus on impacts sector and economics models. Subsetting inherently leads to a loss of information but can free up resources to explore important uncertainties in the integrated assessment that would otherwise be prohibitive. The Representative T&P GCM Subsetting Approach identifies five individual GCMs that capture a profile of the full ensemble of temperature and precipitation change within the growing season while maintaining information about the probability that basic classes of climate changes (relatively cool/wet, cool/dry, middle, hot/wet, and hot/dry) are projected in the full GCM ensemble. We demonstrate the selection methodology for maize impacts in Ames, Iowa, and discuss limitations and situations when additional information may be required to select representative GCMs. We then classify 29 GCMs over all land areas to identify regions and seasons with characteristic diagonal skewness related to surface moisture as well as extreme skewness connected to snow-albedo feedbacks and GCM uncertainty. Finally, we employ this basic approach to recognize that GCM projections demonstrate coherence across space, time, and greenhouse gas concentration pathway. The Representative T&P GCM Subsetting Approach provides a quantitative basis for the determination of useful GCM subsets, provides a practical and coherent approach where previous assessments selected solely on availability of scenarios, and may be extended for application to a range of scales and sectoral impacts.

Climate Change; GCMs; Climate Model Subset; Repres↗