Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pressure gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Circulation in the high-latitude thermosphere due to electric fields and Joule heating

Electric fields in the earth's upper atmosphere are capable of setting the neutral atmosphere in motion via ion-neutral collisions as well as pressure gradients from resultant Joule heating. By means of simple models for the high-latitude thermosphere and electric fields a simplified set of coupled equations is solved which show that moderate electric fields, when present for a period of several hours, are capable of displacing the neutral atmosphere of the order of 50 km in the vertical, a few hundred kilometers in the north-south direction and over 1000 km in the east-west direction.

Heaps, M. G.↗
NASA NTRS1975

Shock wave relations in lunar ash flow

A detailed analysis of steady normal shock waves in a layer of lunar ash by the theory of two phase flow of a mixture of a gas and small solid particles is presented. New terms of pressure gradient and virtual mass forces in the particle momentum equation and the particle kinetic energy and work done in the particle energy equation are included in the fundamental equations and their influences are investigated. The flow variables as functions of the free stream Mach number, initial particle volume fraction and the density ratio G are presented. The thickness of the relaxation zone is found to increase with decreasing initial particle volume fraction and almost independent of G for any given values of free stream Mach number. A new empirical relation of the drag coefficient for the spherical particles in the mixture is proposed to fit experimental data.

Pai, S. I.↗
NASA NTRS1976

Conical diffuser for fuel cells

Diffuser is inserted into inlet manifold, producing smooth transition of flow from pipe diameter to manifold diameter. Expected pressure gradient and resulting cell-to-cell temperature gradient are reduced. Outlet manifold has nozzle insert that reduces exit losses.

Craft, D. W.↗
NASA NTRS1975

Asymptotic theory of two-dimensional trailing-edge flows

Problems of laminar and turbulent viscous interaction near trailing edges of streamlined bodies are considered. Asymptotic expansions of the Navier-Stokes equations in the limit of large Reynolds numbers are used to describe the local solution near the trailing edge of cusped or nearly cusped airfoils at small angles of attack in compressible flow. A complicated inverse iterative procedure, involving finite-difference solutions of the triple-deck equations coupled with asymptotic solutions of the boundary values, is used to accurately solve the viscous interaction problem. Results are given for the correction to the boundary-layer solution for drag of a finite flat plate at zero angle of attack and for the viscous correction to the lift of an airfoil at incidence. A rational asymptotic theory is developed for treating turbulent interactions near trailing edges and is shown to lead to a multilayer structure of turbulent boundary layers. The flow over most of the boundary layer is described by a Lighthill model of inviscid rotational flow. The main features of the model are discussed and a sample solution for the skin friction is obtained and compared with the data of Schubauer and Klebanoff for a turbulent flow in a moderately large adverse pressure gradient.

Melnik, R. E.↗
NASA NTRS1975

An experimental and numerical investigation of shock-wave induced turbulent boundary-layer separation at hypersonic speeds

An experiment designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer is described. Detailed mean flow-field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations, employing the complete time-averaged Navier-Stokes equations along with algebraic eddy-viscosity and turbulent Prandtl number models to describe shear stress and heat flux, are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero-pressure-gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗
NASA NTRS1975

Effect of starvation on film thickness and traction under elastohydrodynamic rolling and sliding conditions

Traction measurements under starved elastohydrodynamic conditions were obtained for a point-contact geometry. Simultaneous measurements of the film thickness and the location of the inlet lubricant boundary were made. Optical interferometry was used to measure film thickness. The thickness of a starved film for combined rolling and sliding conditions varies with the location of the inlet boundary in the same way as previously found for pure rolling conditions. When the fluid velocity distribution is calculated in the inlet region by a Reynolds lubrication analysis, backflow is seen to occur over a portion of the inlet region. Backflow is essential for the establishment of a flooded condition. The location of certain fluid velocity conditions within the inlet region, as suggested in the literature, does not adequately describe the onset of starvation. For the same slide-roll ratio a starved film was observed to possess greater traction than a flooded film. Traction measurements under starved conditions were also compared with those under flooded conditions for equivalent shear rates in the Hertzian region. When the shear rates within the Hertzian region were low and the film was severely starved, the measured tractions were lower than expected. This may be due to large shear stresses developed by the large pressure gradients that are generated in the inlet region when it is severely starved.

Wedeven, L. D.↗
NASA NTRS1975

Theoretical study of refraction effects on noise produced by turbulent jets

The transmission of acoustic disturbances from the interior of a jet into the ambient air is studied. The jet is assumed infinitely long with mean velocity profile independent of streamwise location. The noise generator is a sequence of transient sources drifting with the local fluid and confined to a short length of the jet. In Part 1, supersonic jets are considered. Numerical results for mean-square pressure versus angle in the far-field show unexpected peaks which are very sharp. Analysis of simplified models indicates that these are complex quasi-resonant effects which appear to the stationary observer in a high frequency range. The peaks are real for the idealized model, but would be smoothed by mathematical integration over source position, velocity, and frequency. Subsonic jets were considered in part 2, and a preliminary study of the near-field was attempted. Mean-square radial displacements (or mean radial energy flow or space-time correlations of radial pressure gradient) are first found for very simple cases. The most difficult case studied is a sequence of transient sources at the center of a uniform-velocity circular cylindrical jet. Here a numerical triple integration is required and seems feasible although only preliminary results for mean square radial displacement are now available. These preliminary results show disturbances decreasing with increasing radial distance, and with increasing distance upstream and downstream from the source. A trend towards greater downstream disturbances appears even in the near field.

Graham, E. W.↗
NASA NTRS1975

An experimental and numerical investigation of shock wave induced turbulent boundary layer separation at hypersonic speeds

A thoroughly documented experiment is reported that was specifically designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer. Detailed mean flow field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero pressure gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗
NASA NTRS1976

Heat-Transfer Characteristics of Partially Film Cooled Plug Nozzle on a J-85 Afterburning Turbojet Engine

Plug nozzle film cooling data were obtained downstream of a slot located at 42 percent of the total plug length on a J-85 engine. Film cooling reduced the aft end wall temperature as much as 150 K, reduced total pressure loss in the upstream convection cooling passages by 50 percent, and reduced estimated compressor bleed flow requirement by 14 percent compared to an all convectively cooled nozzle. Shock waves along the plug surface strongly influenced temperature distributions on both convection and film cooled portions. The effect was most severe at nozzle pressure ratios below 10 where adverse pressure gradients were most severe.

Nosek, S. M.↗
NASA NTRS1976

The minimum drag of thin wings in frictionless flow

The assumptions of the thin airfoil theory are found to provide certain necessary conditions for the minimum drag of airfoils having a given total lift, a given maximum thickness, or a given volume. The conditions are applicable to steady or unsteady motions and to subsonic or supersonic speeds without restriction on the planform. The computation of drag and the statement of the conditions for minimum drag depend on the consideration of a combined flow field, which is obtained by superimposing the disturbance velocities in forward and reversed motions. If the planform of the airfoil and its total lift are given, it is found that, for minimum drag, the lift must be distributed in such a way that the downwash in the combined field is constant over the entire planform. If the planform is given and the thickness of the airfoil is required to contain a specified volume, then the thickness must be distributed over the planform in such a way that the pressure gradient of the combined field in the direction of flight is constant at all points of the wing.

Robert T. Jones↗
NASA NTRS1976

Skin friction reduction by slot injection at Mach 0.8

Surface skin friction, boundary layer profiles and turbulent intensity due to axially symmetric tangential slot injection into a transonic boundary layer were measured. Effects of slot height, multiple slot injection, and injection mass flow rate on the surface skin friction downstream of the the slot have been investigated. Surface skin friction was a function of the injection mass flow rate for x/s 40. Large normal pressure gradient and relatively large turbulent intensity were found near the slot with small injection mass flow rate; the region the high turbulent intensity moved downstream with increasing injection mass flow rate. The results with two slot injections indicated that the distance between slots should be less than 30 slot heights in order to achieve some benefits from the first slot. Of significant importance in the present investigation is that the skin friction reduction obtained at transonic speed is of the same order as obtained in the hypersonic regime. Additional work is required in order to formulate a correlation between the turbulent intensity and the injection mass flow rate that may be used in future analysis.

Zakkay, V.↗
NASA NTRS1976

Measurements in the near-wall region of a relaxing three-dimensional low speed turbulent air boundary layer

An experimental investigation was conducted at selected locations of the near-wall region of a three dimensional turbulent air boundary layer relaxing in a nominally zero external pressure gradient behind a transverse hump (in the form of a 30 deg swept, 5-foot chord wing-type model) faired into the side wall of a low speed wind tunnel. Wall shear stresses measured with a flush-mounted hot-film gage and a sublayer fence were in very good agreement with experimental data obtained with two Preston probes. With the upstream unit Reynolds number held constant at 325,000/ft. approximately one-fourth of the boundary layer thickness adjacent to the wall was surveyed with a single rotated hot-wire probe mounted on a specially designed minimum interference traverse mechanism. The boundary layer (approximately 3.5 in thick near the first survey station where the length Reynolds number was 5.5 million) had a maximum crossflow velocity ratio of 0.145 and a maximum crossflow angle of 21.875 deg close to the wall.

Hebbar, K. S.↗
NASA NTRS1976

Comparison of solutions to boundary-layer and Navier-Stokes equations for the case of mass removal from a turbulent boundary layer

Comparisons are made over a range of Mach numbers from 1.5 to 7.5 at a fixed Reynolds number for various amounts of mass removal (boundary-layer bleed). Results indicate that boundary-layer theory can be used for design purposes in the range of bleed rates required to eliminate separation in an isolated, strong, adverse pressure gradient. Only about 5% to 10% of the boundary-layer mass flow must be removed to prevent such separations. Direct comparisons of bleed rates required to eliminate separation predicted by boundary-layer and Navier-Stokes equations for an M = 3.5-engine inlet centerbody show comparable results.

Rose, W. C.↗
NASA NTRS1975

Signal transit velocities in a turbulent plane jet

A turbulent jet is perturbed transverse to the flow direction by periodic pressure gradients near the nozzle exit. Transit velocities are defined in terms of the measured signal time delay for stations 8, 12, 16 nozzle widths downstream of the nozzle exit. Excitation frequencies to 800 cps are considered. Transit velocities are found to be much less than the jet centerline velocity. The results are related to the convection velocity of turbulence.

Stiffler, A. K.↗
NASA NTRS1975

Flush-mounted hot-wire gage for skin friction and separation detection measurements

A heated-element skin-friction gage employing a very low thermal-conductivity support is described. It is shown that the effective dimension of the gage in the stream direction is only 0.06 mm, including the effects of heat conduction in the supporting material. Because of its small size, the calibration of the gage is independent of the kind of boundary-layer flow (whether laminar or turbulent) and is insensitive to pressure gradients. Construction tolerances can be maintained so that a single universal calibration can be applied. Multiple gages, sufficiently closely spaced so as to interfere with each other, are shown to provide accurate determinations of the location of the points of boundary-layer separation and reattachment.

Rubesin, M. W.↗
NASA NTRS1976

Turbulence model predictions for the inhomogeneous mixing layer

The plane mixing layer between two streams of different densities and velocities is studied using a complete, phenomenological model of turbulence. The model is an extension of that described by Saffman (1974). The properties of similarity solutions are computed, and compared with experimental data. The qualitative dependence on velocity ratio, density ratio, compressibility and adverse pressure gradient is predicted correctly. The quantitative agreement is satisfactory.

Milinazzo, F.↗
NASA NTRS1976

Inlets for high angles of attack

Different inlet designs for high angle of attack STOL and VTOL applications were tested in a subsonic wind tunnel. Three removable entry lips having contraction ratios of 1.30, 1.34 and 1.38 were tested with a single diffuser. The internal contour of each entry lip was an ellipse with a major to minor axis of 2.0. Each lip and diffuser assembly was tested to determine its tolerance to angle of attack, first with a conventional centerbody and then with an extended centerbody. Results indicate that a large improvement in separation angle (determined as a function of lip contraction ratio and inlet flow) was obtained for the extended centerbody for all contraction ratios. Improved inlet tolerance to angle of attack was obtained by reducing the adverse pressure gradient downstream of the throat.

Miller, B. A.↗
NASA NTRS1976

An analysis of auroral E region neutral winds based on incoherent scatter radar observations at Chatanika

The physical origin of auroral E-region neutral winds during geomagnetic disturbances is investigated by comparing incoherent-backscatter radar observations made at Chatanika, Alaska, during such disturbances with detailed theoretical calculations of neutral velocities for these conditions. In the analysis, an ion-drag collisional-coupling model is adopted as the primary driving force for the neutral winds. Electric fields and electron number densities observed by the radar facility are used in the calculations, and the coupled ion and neutral momentum equations are solved numerically as functions of altitude and time in the ion-drag approximation. The altitude structure of the velocity field is examined, and the detailed response of the neutral gas to the ion-drag mechanism is delineated. Weighted altitude averages of the calculated velocities are obtained, the accuracy of the procedure for deriving neutral winds from incoherent-scatter radar observations is evaluated, and the comparison is carried out. It is concluded that both ion drag and pressure gradients appear to be required to explain the neutral winds observed in the auroral E-region during geomagnetic disturbances.

Comfort, R. H.↗