Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “planetary temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Viking: The exploration of Mars

Photographs of the planet Mars generated by the Viking Mars program are presented and discussed. The Martian surface and its volcanoes receive particular attention. In addition, the atmosphere, temperature, surface craters, polar regions, and composition of Mars are briefly reviewed. Planetary evolution is considered. The highlights of the Mariner program for Mars are given.

Source record↗

Grain abundance in the primordial atmosphere of the earth

For models of planetary accumulation in the presence of solar nebular gas, the initial surface temperature of the earth is controlled by the grain opacity of the atmosphere. The surface temperature in turn controls the quantity of neon dissolved and trapped within the interior of the earth. To compare accumulation theory with observation, calculations have been made of the grain opacity expected to be associated with accumulation in a gaseous nebula. There are two parameters that are in principle determined by the theory, but actually are at present uncertain: the mean eccentricity(e) of the planetesimal swarm, and the fraction (xi) of the accretional energy that is expended in the release of grains into the atmosphere by ablation of the incoming planetesimal. It is found that if e is low (0.001), rather low values of xi (0.00001) are required to match the observed neon data. In contrast higher values of xi (0.1) are required for the most probable case with e = 0.01. For the high-eccentricity case (e = 0.1), xi must be greater than 0.01. The results show that avoidance of excess trapped neon of solar composition places restrictive, but not necessarily impossible, conditions on the parameters of the accumulation theory.

Mizuno, H.↗

What predictions can be made on the nature of carbon and carbon-bearing compounds (hydrocarbons) in the interstellar medium based on studies of interplanetary dust particles?

The nature of hydrocarbons and properties of elemental carbon in circumstellar, interstellar, and interplanetary dust is a long standing problem in astronomy and meteorite research. The textures and crystallographical properties of poorly graphitized carbon (PGC) from carbonaceous chondrites and Chondritic Porous Aggregates (CPAs) are comparable with PGCs formed by dehydrogenation and carbonization of hydrocarbon precursors under natural terrestrial and experimental conditions. A multistage model of hydrocarbon diagenesis in CPA and carbonaceous chondrite (proto-) planetary parent bodies was proposed in which hydrocarbons are subjected to low temperature hydrous pyrolysis. Continued efforts to recognize hydrocarbons and elemental phases in CPAs may allow understanding of the multistage hydrocarbon/elemental carbon model.

Rietmeijer, F. J. M.↗

Rototranslational absorption spectra of H2-H2 pairs in the far infrared

On the basis of ab initio induced dipole components and a well-tested isotropic potential, the collision-induced absorption rototranslational profiles of hydrogen have been determined using an exact wave-mechanical theory. The main induction mechanisms, particularly the quadrupole-induced 0223,2023 components, are found to be consistent with observations. It is demonstrated that the present theory can be used to predict spectra at temperatures where no measurements exist, as is needed for the modeling of planetary and stellar atmospheres.

Meyer, Wilfried↗

Properties of the central star of NGC 6826 (03f)

High dispersion ultraviolet and visual spectra are used to derive the properties of the O3Iaf-type central star of the planetary nebula, NGC 6826. It is concluded that the star has a temperature of 50,000 K and a mass of 0.65 M. Discrepancy is found between the mass derived from photospheric analysis and the mass derived from other methods.

Heap, S.↗

Recent trends in stratospheric total ozone - Implications of dynamical and El Chichon perturbations

The recently reprocessed Nimbus-7 TOMS total ozone data from 1979 to 1989 are analyzed to assess the global impact of the El Chichon volcanic eruption on stratospheric total ozone. An apparent decrease in total ozone of 5 to 6 percent is present during the winter of 1982-1983 following the eruption of El Chichon. A regression analysis of total ozone with the equatorial zonal wind at 30 mb indicates that response to the quasi-biennial oscillation can explain much of the observed ozone anomaly, and that the total ozone decrease which can be attributed to El Chichon is at most 2 to 4 percent. This study also suggests that the interannual variability caused by the quasi-biennial oscillation and planetary wave activity may introduce apparent seasonal trends in total ozone and temperature in the lower stratosphere, particularly if the length of the data record is not very long. Such trends may affect the assessment of total ozone changes caused by chemical perturbations.

Chandra, S.↗

Far-infrared emission lines from planetary nebulae

The line trio (O III) 52, 88 microns, (N III) 57 microns has been measured in a number of planetary nebulae (PNe) and used to determine nebular properties such as density, temperature, and N/O abundance. The N/O ratios, which are elevated in many PNe due to nuclear processing in the progenitor star, agree well with optical determinations. The (O I) 63 micron line has been detected in about a dozen PNe, demonstrating the ubiquity of neutral envelopes. Measurements of (O I) 63, 146 microns and (C II) 158 microns, the primary cooling lines from the ionized/neutral interface zone or photodissociation region (PDR), have been made for six PNe. The line strengths indicate that the line-emitting regions are warm (T greater than or equal to 500 K), dense (log n greater than or equal to 4), and contain of order 0.1 solar masses.

Dinerstein, Harriet L.↗

Status of the James Webb Space Telescope

The James Webb Space Telescope (JWST) is a large aperture (6.5 meter), cryogenic space telescope with a suite of near and mid-infrared instruments covering the wavelength range of 0.6 J,Jm to 28 J,Jm. JWST's primary science goal is to detect and characterize the first galaxies. It will also study the assembly of galaxies, star formation, and the formation of evolution of planetary systems. JWST is a segmented mirror telescope operating at approx.40K, a temperature achieved by passive cooling of the observatory, via a large, 5-layer membrane-based sunshield. We present an overview of the observatory design, the mission science objectives, the integration and test program and review the concept for science operations of JWST. With construction of the observatory progressing rapidly across all elements of the observatory, we will report on recent highlights such as the completion of the first JWST primary mirror segment. We will also review the predicted performance of the JWST observatory, based on initial measurements of the telescope optics and instrumentation.

Champin, Mark↗

Overview of the James Webb Space Telescope

The James Webb Space Telescope (JWST) is a large aperture (6.5 meter), cryogenic space telescope with a suite of near and mid-infrared instruments covering the wavelength range of 0.6 microns to 28 microns. JWST's primary science goals are to detect and characterize the first galaxies, and study the assembly of galaxies, star formation, and the formation of evolution of planetary systems. JWST is a segmented mirror telescope operating at approx.40K, a temperature achieved by passive cooling of the observatory, via a large, 5-layer membrane-based sunshield. We will review the scientific capabilities of JWST in the context of their synergy with survey facilities, and with the next generation of ground-based Extremely Large Telescopes. We will also present an overview of the observatory design, and report on recent progress in the construction of the observatory and its science instruments.

Clampin, Mark↗

The Abiotic Production in Space of Molecules of Astrobiological Interest

The chemistry that occurs in space is considerably different from what we are used to in a planetary setting. The extremely low densities, high radiation fields, and extremes in temperature (both high and low), and the fact that hydrogen and helium represent all but a few percent of the available reactants, would normally be thought to be counter-productive for the production of complex molecular species. Surprisingly, chemistry reactions occur in many environments in space, although few of these involve simple aqueous or gas phase reactions of the type we are familiar with on Earth. Instead they involve ion-molecule and radical-molecule reactions, gas-grain reactions, and reactions mediated by ionizing radiation. This talk will focus on the chemistry that can occur when extraterrestrial mixed-molecular ices are exposed to radiation and will concentrate on the production of molecules that are of particular interest for astrobiologists.

Sandford, Scott↗

Molten Salt Lattice Confinement Fusion (LCF) Fast Fission Reactor for Lunar and Planetary Surface Power

Molten salt fission reactors (MSR) have been suggested for lunar and planetary surface power systems. They have the advantage of operating at high temperature, for efficient thermal-electrical conversion, low pressure, long-lived with high nuclear fuel burnup. MSR are often designed to breed fissile 233U from natural 232Th by neutron capture and  decay via: 232Th(n,)233Th(,)233Pa(,)233U Unfortunately, this process requires 233Pa isotope separation and segregation to decay to 233U. This requirement prevents additional neutron capture that interferes with 233U breeding. Instead, Wooley’s sub-critical, fast fission, molten salt reactor would use externally generated tokamak fusion neutrons1,2 to fission all actinides.We propose a simpler fusion-fast-fission sub-critical reactor that generates fast neutrons in situ from lattice confinement fusion (LCF) to fission fertile and fissile actinides. This hybrid reactor doesn't require enriched 235U fissile pins to initiate fis-sion reactions, nor 233Pa separation and segregation during operation. Like Wooley’s, this hybrid reactor “burns” natural uranium (238U) or thorium (232Th) which avoids uranium enrichment and additional fissile material launch safety and security costs. The LCF neutron source is initiated by bremsstrahlung photoneutrons (Fig. 1)3 or isotopic neutron sources in electron-screened lattices (Fig. 2)4,5. Alternatively, the electrolytic Pd-deuterium co-deposition6protocol fast fissions7 both 232Th and 238U. However, an aqueous electrolyte-based system, without pressurization similar to conventional pressurized water fission reactors, is incapable of high temperatures due to the boiling point of the electrolyte slightly over 100 C. Molten salts can be used instead as was demonstrated at the University of Hawaii8 using a variety of Ni and Pd cathodes in lithiated, hydrided and deuterated salts. These salts have melting points often exceeding 500C making them suitable to efficiently produce electrical power9 through either Advanced Stirling Genera-tors (< 100 kWe) or closed-Brayton Cycle (> 100 kWe). This hybrid reactor could power a wide range of lunar or Martian applications from unmanned in-struments, to charging vehicles and entire facilities such as human habitats or in situ resource utilization. The power conversion cycles are Carnot Cycle limited, but generally 30% efficient at best. However, waste heat on the moon or Mars is important to surviving either two-week lunar nights or Martian nights as well as providing process heat for mineral extraction and “living off the land”

Lawrence Forsley↗

Evaluating the Impact of Chemical Complexity and Horizontal Resolution on Tropospheric Ozone Over the Conterminous US With a Global Variable Resolution Chemistry Model

A new configuration of the Community Earth System Model (CESM)/Community Atmosphere Model with full chemistry (CAM-chem) supporting the capability of horizontal mesh refinement through the use of the spectral element (SE) dynamical core is developed and called CESM/CAM-chem-SE. Horizontal mesh refinement in CESM/CAM-chem-SE is unique and novel in that pollutants such as ozone are accurately represented at human exposure relevant scales while also directly including global feedbacks. CESM/CAM-chem-SE with mesh refinement down to ∼14 km over the conterminous US (CONUS) is the beginning of the Multi-Scale Infrastructure for Chemistry and Aerosols (MUSICAv0). Here MUSICAv0 is evaluated and used to better understand how horizontal resolution and chemical complexity impact ozone and ozone precursors over CONUS as compared to measurements from five aircraft campaigns, which occurred in 2013. This field campaign analysis demonstrates the importance of using finer horizontal resolution to accurately simulate ozone precursors such as nitrogen oxides and carbon monoxide. In general, the impact of using more complex chemistry on ozone and other oxidation products is more pronounced when using finer horizontal resolution where a larger number of chemical regimes are resolved. Large model biases for ozone near the surface remain in the Southeast US as compared to the aircraft observations even with updated chemistry and finer horizontal resolution. This suggests a need for adding the capability of replacing sections of global emission inventories with regional inventories, increasing the vertical resolution in the planetary boundary layer, and reducing model biases in meteorological variables such as temperature and clouds.

MUSICA↗

The Lithophile Element Budget of Earth’s Core

The relative composition of Earth’s core and mantle were set during core formation. By determining how elements partition between metal and silicate at high pressures and temperatures, measurements of the mantle composition and geophysical observations of the core can be used to understand the mechanisms by which Earth formed. Here we present the results of metal–silicate partitioning experiments for a range of nominally lithophile elements (Al, Ca, K, Mg, O, S, Si, Th, U) and S to 85 GPa and up to 5400 K. With our results and a compilation of literature data, we developed a parameterization for partitioning that accounts for compositional dependencies in both the metal and silicate phases. Using this parameterization in a range of planetary growth models, we find that, in general, lithophile element partitioning into the metallic phase is enhanced at high temperatures. The relative abundances of FeO, SiO2 and MgO in the mantle vary significantly between planetary growth models, and the mantle abundances of these elements can be used to provide important constraints on Earth’s accretion. To match Earth’s core mass and mantle composition, Earth’s building blocks must have been enriched in Fe and depleted in Si compared with CI chondrites. Finally, too little Mg, Si and O are partitioned into the core for precipitation of oxides to be a major source of energy for the geodynamo. In contrast, several ppb of U can be partitioned into the core at high temperatures, and this energy source must be accounted for in thermal evolution models.

dynamo↗

A SEARCH FOR NEAR INFRARED BANDS OF THE FULLERENE CATION C{sub 60}{sup +} IN THE PROTOPLANETARY NEBULA IRAS 01005+7910

IRAS 01005+7910 is a carbon-rich protoplanetary nebula with a recently reported detection of mid-IR vibrational transitions of the fullerene C{sub 60} by Zhang and Kwok. We present new high spectral resolution (R ∼ 57, 000) observations of this object obtained at the 3.6 m Telescopio Nazionale Galileo, showing the presence of two absorption bands at 9577 and 9632 Å which are consistent with laboratory measurements of the C{sub 60}{sup +} cation. If these two bands were produced by C{sub 60}{sup +} in the material surrounding the central post-asymptotic giant branch star, we estimate that ∼1% of carbon could be trapped in this ionized form of fullerenes which would be more abundant than the neutral species in this protoplanetary nebulae. The central star with an effective temperature of T ≥ 20, 000 K can provide the ionizing photons required. These observations bring further evidence for the presence of fullerenes in protoplanetary nebulae and suggest that a significant production takes place in this late stage of stellar evolution. Mid-IR bands of C{sub 60}{sup +} could be present in the 7-20 μm spectrum of IRAS 01005+7910 and are also likely to be detected in the spectra of planetary nebulae. High-resolution spectroscopy will be required for a reliable determination of the excitation temperatures and the relative abundance of neutral and ionized fullerenes in these objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Sound velocities and thermal equation of state of fcc -iron-nickel alloys at high pressure and high temperature: Implications for the cores of Moon and several planets

Fcc-Fe-Ni alloy is believed to be the most dominant solid constitute of moderate-sized terrestrial planetary cores. Investigating the physical properties, especially the density and sound velocity of Fe-Ni alloys and comparing them with seismic observations is an indispensable approach to constructing compositional models for planetary interiors. In this study, we conducted sound velocity measurements on Fe-Ni alloys with 10 wt.% and 20 wt.% Ni up to ∼13.5 GPa and 1073 K, using the ultrasonic interferometry technique in a multi-anvil apparatus in conjunction with synchrotron radiation. By fitting the experimental data to finite strain equations, the bulk and shear moduli and their pressure and temperature derivatives are derived, yielding K S0 =145.8(14) GPa, G 0 = 73.2(7) GPa, K S0 ’ = 5.89(24), G 0 ’ = 2.89(8), (∂K S /∂T) P = -0.0181(12) GPa/K and (∂G/∂T) P = -0.0393(10) GPa/K for fcc-Fe 80 Ni 20 . An examination of the density-velocity relationship shows that compressional wave velocity is insensitive to temperature within the current pressure and temperature range, while shear wave velocity exhibits a large reduction with increasing temperature. Here, extrapolation of the sound velocities following the finite strain theories suggests that much slower Vs should be expected at pressure and temperature conditions corresponding to those of the lunar core. Possible core density and velocity profiles for other moderate planets and satellites, such as Mars, Mercury, and Ganymede are also calculated.

Equation of state↗

Lithium-ion cell technology demonstration for future NASA applications

NASA requires lightweight rechargeable batteries for future missions to Mars and the outer planets that are capable of operating over a wide range of temperatures, with high specific energy and energy densities. Due to their attractive performance characteristics, lithium-ion batteries have been identified as the battery chemistry of choice for a number of future applications, including planetary orbiters, rovers and landers. For example, under the Mars Surveyor Program MSP 01 lithium-ion batteries were developed by Lithion (each being 28 V, 25 Ah, 8-cells. and 9 kg) and fully qualified prior to mission cancellation. In addition to the requirement of being able to supply at least 90 cycles on the surface of Mars, the battery demonstrated operational capability (both charge and discharge) over a large temperature range (-2O'C to +4OoC), with tolerance to non-operational excursions to -30nd 50Currently, JPL is implementing lithium-ion technology on the 2003 Mars Exploration Rover (MER), which will be coupled with a solar array. This mission has similar performance requirements to that of the 2001 Lander in that high energy density and a wide operating temperature range are necessitated. In addition to planetary rover and lander applications, we are also engaged in determining the viability of using lithium-ion technology for orbiter applications that require exceptionally long life (>20,000 cydes at partial depth of discharge). To assess the viabili of lithium-ion cells for these applications, a number of performance characterization tests have been performed (at the cell and battery level) on state-of-art prototype lihium- ion cells, induding: assessing the cycle life performance (at varying DODs), life characteristics at extreme temperatures (< -10nd >+4OoC), rate capability as a function of temperature (-30' to 4OoC), pulse capability, self-discharge and storage characteristics, as well as, mission profile capability. This paper will describe the current and future NASA missions that are considering lithium ion batteries and will contain results of the cell testing conducted to-date to validate the technology for these missions.

lithium-ion batteries Mars landers Mars rovers↗

Multi-temperature model derived from state-to-state kinetics for hypersonic entry in Jupiter atmosphere

A state-to-state model of H{sub 2}/He plasmas coupling the master equations for internal distributions of heavy species with the transport equation for the free electrons has been used as a basis for implementing a multi-temperature kinetic model. In the multi-temperature model internal distributions of heavy particles are Boltzmann, the electron energy distribution function is Maxwell, and the rate coefficients of the elementary processes become a function of local temperatures associated to the relevant equilibrium distributions. The state-to-state and multi-temperature models have been compared in the case of a homogenous recombining plasma, reproducing the conditions met during supersonic expansion though converging-diverging nozzles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Analysis and Procedure for Determining Space Environmental Sink Temperatures With Selected Computational Results

The purpose of this report was to analyze the heat-transfer problem posed by the determination of spacecraft temperatures and to incorporate the theoretically derived relationships in the computational code TSCALC. The basis for the code was a theoretical analysis of the thermal radiative equilibrium in space, particularly in the Solar System. Beginning with the solar luminosity, the code takes into account these key variables: (1) the spacecraft-to-Sun distance expressed in astronomical units (AU), where 1 AU represents the average Sun-to-Earth distance of 149.6 million km; (2) the angle (arc degrees) at which solar radiation is incident upon a spacecraft surface (ILUMANG); (3) the spacecraft surface temperature (a radiator or photovoltaic array) in kelvin, the surface absorptivity-to-emissivity ratio alpha/epsilon with respect to the solar radiation and (alpha/epsilon)(sub 2) with respect to planetary radiation; and (4) the surface view factor to space F. Outputs from the code have been used to determine environmental temperatures in various Earth orbits. The code was also utilized as a subprogram in the design of power system radiators for deep-space probes.

Juhasz, Albert J.↗