Results for “physical data and processes” — Page 44

NASA NTRS1981

A computer program for the simulation of heat and moisture flow in soils

A computer program that simulates the flow of heat and moisture in soils is described. The space-time dependence of temperature and moisture content is described by a set of diffusion-type partial differential equations. The simulator uses a predictor/corrector to numerically integrate them, giving wetness and temperature profiles as a function of time. The simulator was used to generate solutions to diffusion-type partial differential equations for which analytical solutions are known. These equations include both constant and variable diffusivities, and both flux and constant concentration boundary conditions. In all cases, the simulated and analytic solutions agreed to within the error bounds which were imposed on the integrator. Simulations of heat and moisture flow under actual field conditions were also performed. Ground truth data were used for the boundary conditions and soil transport properties. The qualitative agreement between simulated and measured profiles is an indication that the model equations are reasonably accurate representations of the physical processes involved.

Camillo, P.↗

NASA NTRS1987

Measurement-based analysis of error latency

This paper demonstrates a practical methodology for the study of error latency under a real workload. The method is illustrated with sampled data on the physical memory activity, gathered by hardware instrumentation on a VAX 11/780 during the normal workload cycle of the installation. These data are used to simulate fault occurrence and to reconstruct the error discovery process in the system. The technique provides a means to study the system under different workloads and for multiple days. An approach to determine the percentage of undiscovered errors is also developed and a verification of the entire methodology is performed. This study finds that the mean error latency, in the memory containing the operating system, varies by a factor of 10 to 1 (in hours) between the low and high workloads. It is found that of all errors occurring within a day, 70 percent are detected in the same day, 82 percent within the following day, and 91 percent within the third day. The increase in failure rate due to latency is not so much a function of remaining errors but is dependent on whether or not there is a latent error.

Chillarege, Ram↗

NASA NTRS1995

The Experience Factory: Strategy and Practice

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies through capitalization and reuse of its cycle experience and products. The paper introduces the major concepts of the proposed approach, discusses their relationship with other approaches used in the industry, and presents a case in which those concepts have been successfully applied.

Basili, Victor R.↗

NASA NTRS2001

Plasma Reactor Modeling and Validation Experiments

Plasma processing is a key processing stop in integrated circuit manufacturing. Low pressure, high density plum reactors are widely used for etching and deposition. Inductively coupled plasma (ICP) source has become popular recently in many processing applications. In order to accelerate equipment and process design, an understanding of the physics and chemistry, particularly, plasma power coupling, plasma and processing uniformity and mechanism is important. This understanding is facilitated by comprehensive modeling and simulation as well as plasma diagnostics to provide the necessary data for model validation which are addressed in this presentation. We have developed a complete code for simulating an ICP reactor and the model consists of transport of electrons, ions, and neutrals, Poisson's equation, and Maxwell's equation along with gas flow and energy equations. Results will be presented for chlorine and fluorocarbon plasmas and compared with data from Langmuir probe, mass spectrometry and FTIR.

Meyyappan, M.↗

NASA NTRS2003

The Physics of Accretion in X-Ray Binaries

This project consists of several related investigations directed to the study of mass transfer processes in X-ray binaries. Models developed over several years be tested on a balanced mix of existing data and planned observations with both ground and space-based observatories. The extended time coverage of the observations and the existence of simultaneous X-ray, ultraviolet, and optical observations will be particularly beneficial for studying the accretion flows. These investigations, which take as detailed a look at the accretion process in X-ray binaries as is now possible, test current models to their limits, and force us to extend them. We now have the ability to do simultaneous ultraviolet/X-ray/optical spectroscopy with HST, Chandra, XMM, and ground-based observatories. The rich spectroscopy that these observations give us must be interpreted principally by reference to detailed models, the development of which is already well underway; tests of these essential interpretive tools are an important product of the proposed investigations.

Oliversen, Ronald↗

NASA NTRS2006

The Glory Program: Global Science from a Unique Spacecraft Integration

The Glory program is an Earth and Solar science mission designed to broaden science community knowledge of the environment. The causes and effects of global warming have become a concern in recent years and Glory aims to contribute to the knowledge base of the science community. Glory is designed for two functions: one is solar viewing to monitor the total solar irradiance and the other is observing the Earth s atmosphere for aerosol composition. The former is done with an active cavity radiometer, while the latter is accomplished with an aerosol polarimeter sensor to discern atmospheric particles. The Glory program is managed by NASA Goddard Space Flight Center (GSFC) with Orbital Sciences in Dulles, VA as the prime contractor for the spacecraft bus, mission operations, and ground system. This paper will describe some of the more unique features of the Glory program including the integration and testing of the satellite and instruments as well as the science data processing. The spacecraft integration and test approach requires extensive analysis and additional planning to ensure existing components are successfully functioning with the new Glory components. The science mission data analysis requires development of mission unique processing systems and algorithms. Science data analysis and distribution will utilize our national assets at the Goddard Institute for Space Studies (GISS) and the University of Colorado's Laboratory for Atmospheric and Space Physics (LASP). The Satellite was originally designed and built for the Vegetation Canopy Lidar (VCL) mission, which was terminated in the middle of integration and testing due to payload development issues. The bus was then placed in secure storage in 2001 and removed from an environmentally controlled container in late 2003 to be refurbished to meet the Glory program requirements. Functional testing of all the components was done as a system at the start of the program, very different from a traditional program. The plan for Glory is to minimize any changes to the spacecraft in order to meet the Glory requirements. This means that the instrument designs must adhere to the existing interfaces and capabilities as much as possible. Given Glory's unique history and the potential science return, the program is one of significant value to both the science community and the world. The findings Glory promises will improve our understanding of the drivers for global climate change for a minimal investment. The program hopes to show that reuse of existing government assets can result in a lower cost, and fully successful mission.

Bajpayee Jaya↗

NASA NTRS2008

Enhanced Self Tuning On-Board Real-Time Model (eSTORM) for Aircraft Engine Performance Health Tracking

A key technological concept for producing reliable engine diagnostics and prognostics exploits the benefits of fusing sensor data, information, and/or processing algorithms. This report describes the development of a hybrid engine model for a propulsion gas turbine engine, which is the result of fusing two diverse modeling methodologies: a physics-based model approach and an empirical model approach. The report describes the process and methods involved in deriving and implementing a hybrid model configuration for a commercial turbofan engine. Among the intended uses for such a model is to enable real-time, on-board tracking of engine module performance changes and engine parameter synthesis for fault detection and accommodation.

Volponi, Al↗

NASA NTRS2015

Volatile and Isotopic Imprints of Ancient Mars

The science investigations enabled by Curiosity rover's instruments focus on identifying and exploring the habitability of the Martian environment. Measurements of noble gases, organic and inorganic compounds, and the isotopes of light elements permit the study of the physical and chemical processes that have transformed Mars throughout its history. Samples of the atmosphere, volatiles released from soils, and rocks from the floor of Gale Crater have provided a wealth of new data and a window into conditions on ancient Mars.

Ancients↗

NASA NTRSDate not supplied

Modeling Pore Closure in the Hot Isostatic Pressing of Additively Manufactured Inconel 718 Samples

Additive manufacturing provides opportunity for a new world of possibilities for metallic component design and fabrication; however, as-built part quality is notoriously variable, anisotropic, and degraded by porous defects. To improve quality, parts are commonly post processed using a variety of techniques including hot isostatic pressing (HIP). During HIP, high temperature and pressure is employed to improve microstructure and reduce pore volume by inducing visco-plastic deformation in the metallic substrate. Validated computational capabilities can provide predictions to guide the selection of processing condition, expected pore reduction, and the effects of varying entrapped gas in the pores. This discussion describes a micro-scale finite element structural model developed to predict pore closure due to HIP in as-built additively manufactured Inconel 718 samples produced by the laser powder bed fusion process. The model accounts for plastic deformation, creep, and internal pressure for a single pore. Pores are characterized in physical samples before and after HIP, and model predictions are compared to this measured data.

defect model prediction↗

NASA NTRS2021

Phase Change Processes for Thermal Management Systems and Science Investigations

This white paper focuses on the scientific rationale and motivation for deploying phase change processes-based spacecraft thermal management systems for space missions [1,2]. Phase change processes need to be implemented in the design of various life support systems, sub-critical cryogenic and thermal control systems, taking advantage of the latent heat of phase change so as to significantly increase the heat transfer rate per unit fluid mass. Experimental data are critical to understanding gravitational effects on complex phase change processes using novel materials and working fluids. Experimental data can be acquired by either designing new testing platforms or performing experiments with simulant fluids on existing microgravity platforms. With the acquired data, theoretical flow physics models and numerical simulations can then be validated for use under long-duration microgravity conditions. The acquired data and validated models will enable the deployment of game-changing thermal management systems with remarkably improved efficiency and stability in heat acquisition, transport, and rejection for long-duration space missions.

Fluid mechanics↗

NASA NTRSDate not supplied

Experimental and Theoretical Needs for the JWST Early Release Science Program on Radiative Feedback from Massive Stars (PDRs4ALL): III. A Quantum Chemistry Perspective

Massive stars disrupt their natal molecular cloud material by dissociating molecules, ionizing atoms and molecules, and heating the gas and dust. These processes drive the evolution of interstellar matter in our Galaxy and throughout the Universe from the era of vigorous star formation at z=1-3 to the present day. Much of this interaction occurs in Photo- Dissociation Regions (PDRs) where far-ultraviolet photons of these stars create a largely neutral, but warm region of gas and dust. PDR emission dominates the IR spectra of starforming galaxies and provides a unique tool to study the physical and chemical processes that are relevant for inter- and circumstellar media including diffuse clouds, molecular cloud and protoplanetary disk surfaces, and starburst galaxies. The ERS program ID1288 is dedicated to provide template data as well as data processing and analysis tools for PDRs. To this end, it will observe the Orion Bar, the proto-typical PDR situated in the nearby Orion Nebula, using NIRSpec IFU, MIRI IFU, and NIRCAM and MIRI imaging. These observations will, for the first time, spatially resolve and perform a tomography of the PDR, revealing the individual IR spectral signatures from the key zones and sub-regions within the ionized gas, the PDR, and the molecular cloud. Quantum chemistry can be used to determine molecular data such as ionization potentials, chemical reaction rates, electronic spectra, dissociation energies, channels, and branching ratios, etc. These are often used in synergy with experiment to take advantage of the strengths of each approach. An area of active research is modeling the infrared (IR) emission spectra produced by PAH molecules, including the effects of anharmonicity. This will be important in the interpretation of JWST data which will yield higher-resolution spectral data compared to Spitzer or ISO. Quantum chemistry methods can compute accurate anharmonic IR absorption spectra of PAH molecules up to about 25 C atoms, and the results have been benchmarked against high-resolution experimental spectra. These feed into a quantum Monte Carlo (QMC) approach to generate temperature-dependent anharmonic IR emission spectra and then used to generate fully anharmonic cascade emission IR spectra of PAH molecules -- the very type of spectra that JWST will observe. Work continues to extend these methods to larger PAH molecules. We will discuss the current state of this work, as well as

Timothy Lee↗

NASA NTRSDate not supplied

Generating Cryogenic Lunar Simulants Within the Planetary Exploration & Astromaterials Research Laboratory

The Planetary Exploration & Astromaterials Research Laboratory (PEARL) aims to provides capabilities for the creation of—and research on—cryogenic lunar regolith simulants (CRS) containing surface volatile analytes. CRS represent regolith samples that might be collected from lunar Permanently Shadowed Regions (PSRs) during future missions. Handling CRS requires procedural and engineering development due to extremely cold (i.e. ≤ - 196°C) working temperatures. However, there is an imperative to understand the physical and chemical alteration of samples during collection, transport, and curation processes throughout the Artemis missions. The chemistries that will be encountered within the PSRs need to be understood based upon prior mission data analysis. The ability to utilize these techniques provides future tests that could be relevant to planetary protection applications regarding future robotic sample return.

Lunar↗

NASA NTRSDate not supplied

Integrated Process-Structure-Property Simulations for Additive Manufacturing Using the Open-Source Materialite Package

The microstructure and properties of additively manufactured (AM) metals are strongly dependent on process conditions. Therefore, process-structure-property (PSP) simulations are a useful tool for exploring process parameter space, studying process variations, and quantifying uncertainty in material properties. However, integrating process-structure and structure-property simulations often involves connecting multiple software packages. Each package may use unique data structures and require substantial domain knowledge. This presentation demonstrates PSP simulation capabilities of Materialite, an open-source package developed at NASA Langley Research Center. Materialite simplifies model linkages by using a common data structure and model interface, enabling straightforward simulation across a PSP model chain. Physics-based models, including kinetic Monte Carlo and crystal plasticity, are implemented within the package. The model interface is also intended to simplify implementation of new models and enable integration with external simulation tools. Example use cases include uncertainty quantification with PSP models and GPU-accelerated powder bed fusion AM process models.

additive manufacturing↗

NASA NTRSDate not supplied

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

NASA NTRSDate not supplied

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

NASA NTRS2020

Fluorescence Correction Vegetation Index (FCVI): A physically based reflectance index to separate physiological and non-physiological information in far-red sun-induced chlorophyll fluorescence

Sun-induced chlorophyll fluorescence (SIF) has been used to track vegetation photosynthetic activity for improving estimation of gross primary productivity (GPP) and detecting plant stress. There are both physical and physiological controls of SIF measured at the surface and retrieved from remote sensing including satellite observations. In order to accurately use SIF for monitoring of plant physiology, the effects of physically-based radiation processes related to leaf and canopy structure, notably photosynthetically active radiation (PAR) absorption and SIF scattering and re-absorption, must be characterized. In this study, we investigate both PAR absorption and SIF scattering processes and find that although it is difficult to quantify their effects individually by using just reflectance, the combined effects of the two processes can be well approximated by a reflectance index. This index, referred to as FCVI (Fluorescence Correction Vegetation Index), is defined as the difference between near-infrared (NIR) and broad-band visible (VIS, 400–700 nm) reflectance acquired under identical sun-canopy-observer geometry of the SIF measurements. The development of the index was based on the physical connection between reflectance and far-red SIF, which was revealed by using the spectral invariant theory. The utility of FCVI to correct far-red SIF for PAR absorption and scattering effects, thus improving the link to photosynthesis, was tested with data from: (i) a field experiment for a growing season; and (ii) a numerical experiment which included a number of scenarios generated by a radiative transfer model. For both the observations and simulations, the FCVI provided a promising estimate of the impact of the physically-based radiation processes on far-red SIF of moderately dense canopies (i.e., FCVI ≥ 0.18). Normalizing the TOC far-red SIF by both the incident PAR (iPAR) and the FCVI provided a good estimate of the far-red fluorescence emission efficiency of the canopies examined. This approach enhances our ability to generalize retrievals for vegetation processes as they change through natural growth phases and seasons. Taken together, far-red SIF and FCVI may enable the assessment of the light partitioning of vegetation canopies, an essential step to facilitate the use of far-red SIF for tracking physiological processes.

Peiqi Yang↗

NASA NTRS2010

Analysis of Sting Balance Calibration Data Using Optimized Regression Models

Calibration data of a wind tunnel sting balance was processed using a candidate math model search algorithm that recommends an optimized regression model for the data analysis. During the calibration the normal force and the moment at the balance moment center were selected as independent calibration variables. The sting balance itself had two moment gages. Therefore, after analyzing the connection between calibration loads and gage outputs, it was decided to choose the difference and the sum of the gage outputs as the two responses that best describe the behavior of the balance. The math model search algorithm was applied to these two responses. An optimized regression model was obtained for each response. Classical strain gage balance load transformations and the equations of the deflection of a cantilever beam under load are used to show that the search algorithm s two optimized regression models are supported by a theoretical analysis of the relationship between the applied calibration loads and the measured gage outputs. The analysis of the sting balance calibration data set is a rare example of a situation when terms of a regression model of a balance can directly be derived from first principles of physics. In addition, it is interesting to note that the search algorithm recommended the correct regression model term combinations using only a set of statistical quality metrics that were applied to the experimental data during the algorithm s term selection process.

Ulbrich, N.↗

NASA NTRS1999

Smagglce: Surface Modeling and Grid Generation for Iced Airfoils: Phase 1 Results

SmaggIce (Surface Modeling and Grid Generation for Iced Airfoils) is a software toolkit used in the process of aerodynamic performance prediction of iced airfoils with grid-based Computational Fluid Dynamics (CFD). It includes tools for data probing, boundary smoothing, domain decomposition, and structured grid generation and refinement. SmaggIce provides the underlying computations to perform these functions, a GUI (Graphical User Interface) to control and interact with those functions, and graphical displays of results, it is being developed at NASA Glenn Research Center. This paper discusses the overall design of SmaggIce as well as what has been implemented in Phase 1. Phase 1 results provide two types of software tools: interactive ice shape probing and interactive ice shape control. The ice shape probing tools will provide aircraft icing engineers and scientists with an interactive means to measure the physical characteristics of ice shapes. On the other hand, the ice shape control features of SmaggIce will allow engineers to examine input geometry data, correct or modify any deficiencies in the geometry, and perform controlled systematic smoothing to a level that will make the CFD process manageable.

Vickerman, Mary B.↗