Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “patch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Interpretation and modeling of quasiperiodic diffraction patterns observed in equatorial VHF scintillation due to plasma bubbles

Quasiperiodic diffraction patterns have been observed in VHF scintillation recorded at Ascension Island in 1981. The patterns occur most often at the beginning or end of a scintillation patch and are shown to be consistent with those expected from irregularities having east-west scale sizes of a few hundred meters that are associated with the walls (edges) of equatorial plasma bubbles. By adjusting the geophysical parameters in a computer simulation of the amplitude fluctuations expected simultaneously at VHF, L-Band and C-Band, we model a specific event in detail. The model contains information on the size and strength of the structures that cause the regular fading patterns. In addition, multi-frequency diffraction patterns are computed for a 'phase screen' model based on high resolution measurements of a structured plasma bubble wall made using the AE-E satellite. The results are qualitatively very similar to the observations. Finally, implications of the model results for the extraction of information about the vertical structure of the irregularities are discussed.

Franke, S. J.↗
NASA NTRS1985

An implicit, conservative, zonal-boundary scheme for Euler equation calculations

A 'zonal', or 'patched-grid', approach is one in which the flow region of interest is divided into subregions which are then discretized independently, using existing grid generators. The equations of motion are integrated in each subregion in conjunction with zonal-boundary schemes which allow proper information transfer across interfaces that separate subregions. The zonal approach greatly simplifies the treatment of complex geometries and also the addition of grid points to selected regions of the flow. In this study a conservative, zonal-boundary condition that could be used with explicit schemes has been extended so that it can be used with existing second-order-accurate implicit integration schemes such as the Beam-Warming and Osher schemes. In the test case considered, the implicit schemes increased the rate of convergence considerably (by a factor of about 30 over that of the explicit scheme). Results demonstrating the time-accuracy of the zonal scheme and the feasibility of performing calculations on zones that move relative to each other are also presented.

Rai, M. M.↗
NASA NTRS1985

G27.4+0.0 - A galactic supernova remnant with a central compact source

High-resolution X-ray and radio images of the galactic supernova remnant G27.4+0.0 are presented. The X-ray image reveals a centrally located compact source of emission which accounts for 25 percent + or - 2 percent of the emission. The rest of the emission is found in diffuse patches defining a circle of diameter 4 arc min. The radio image is an incomplete shell of comparable diameter with no apparent counterpart to the compact X-ray source. The X-ray luminosity of the supernova remmant implied by the distance of 26 kpc inferred from the Sigma-D relationship exceeds that of any known remnant. This fact, plus the relatively low X-ray absorption, suggests that the remnant is substantially closer than 26 kpc. No X-ray variability of the central source has been detected to a level of 50 percent on time scales of about 1 year, and no periodicity in the range 0.0001-100 Hz to a limit of 16 percent was detected. If G27.4 +0.0 is within a few kiloparsecs, the central source is most likely to be an accretion-powered X-ray binary.

Kriss, G. A.↗
NASA NTRS1985

Dual-band reactively loaded microstrip antenna

A previously derived theory is applied to a microstrip antenna with a reactive load to produce a dual-band radiator. A model consisting of a rectangular patch radiator loaded with a variable length short-circuited coaxial stub was investigated experimentally. Comparisons of theoretical predictions and experimental data are made for the impedance and resonant frequencies as a function of the position of the load, the length of the stub, and the characteristic impedance of the stub.

Richards, W. F.↗
NASA NTRS1983

Climatological studies of cloudiness

The influence of subresolution clouds on estimates of synoptic-scale averages and the effect of synoptic-scale clouds on estimates of planetary scale interannual variability are discussed. It is shown that climatic noise is strongly dependent on the season and geographic region, so that the largest anomaly is not always the most significant. The role of advection in determining the time-scales and degrees of freedom of synoptic scale cloudiness is empirically demonstrated and described in terms of a simple model of stochastic 'cloud patches'.

Cahalan, R. F.↗
NASA NTRS1985

Universal time dependence of nighttime F region densities at high latitudes

Coincident auroral-zone experiments using three incoherent-scatter radars at widely spaced longitudes are reported. The observational results demonstrate that, during the night, the F layer electron density is strongly dependent on the longitude of the observing site. Ionization patches were observed in the nighttime F region from the Chatanika and EISCAT radars, while densities observed from the Millstone radar were substantially smaller. The electron density within these maxima is larger at EISCAT than at Chatanika. When observed in the midnight sector auroral zone, these densities had a peak density at a high altitude of 360-475 km. The density was maximum when EISCAT was in the midnight sector and minimum when Millstone was in the midnight sector. A minimum in insolation in the auroral zone occurs at the UT when Millstone is in the midnight sector.

De La Beaujardiere, O.↗
NASA NTRS1984

Adaptive optics

An estimation of the costs and potential resolution and sensitivity benefits of adaptive optics systems is presented. The effects of atmospheric disturbances on the peak-to-peak wavefront errors are assessed. Definitions are included of the maximum permissible controlled patch of entrance pupil of the system, the permissible response time, the permissible field radius, and the required magnitude and frequency of a reference star. It is pointed out that adaptive optics system for visible of near-visible wavelengths is likely to be very expensive, whereas operation at 2-3 microns under best seeing conditions is expected to be useful and have reasonable cost.

Woolf, N. J.↗
NASA NTRS1985

Heat generation in aircraft tires

A method was developed for calculating the internal temperature distribution in an aircraft tire while free rolling under load. The method uses an approximate stress analysis of each point in the tire as it rolls through the contact patch, and from this stress change the mechanical work done on each volume element may be obtained and converted into a heat release rate through a knowledge of material characteristics. The tire cross-section is then considered as a body with internal heat generation, and the diffusion equation is solved numerically with appropriate boundary conditions of the wheel and runway surface. Comparison with data obtained with buried thermocouples in tires shows good agreement.

Clark, S. K.↗
NASA NTRS1985

Analysis of elliptical and circular microstrip antennas using moment method

A method of calculating the input impedance of either a circular or a slightly elliptical microstrip antenna excited by a coaxial probe is presented. Using the reaction integral equation and the exact dyadic Green's function, the finite substrate thickness is taken into account in the formulation. Good agreement with experimental results for an elliptical patch is obtained and a design procedure for a circularly polarized antenna is presented.

Bailey, M. C.↗
NASA NTRS1986

Repairing Hard-to-Reach Cracks in Heat-Exchanger Tubes

Inaccessible leaks repaired from accessible side of tube. Fish-Mouth insert placed in cut in leaky heat-exchanger tube. Insert welded or brazed to tube, and remaining open area of cut patched. Method developed for repairing leaks in nozzle coolant tubes of Space Shuttle main engine. Method also used on other types of tubular heat exchangers.

Mills, R. C., Sr.↗
NASA NTRS1985

Reduction of Moisture Effects During the Cure of Epoxy Adhesives Used in Composite Repair

The requirements for repair work on Naval aircraft composite wing skins that can be performed under depot conditions (or still worse, under field conditions) are quite restrictive. Equipment that can be used is rather limited as are the available repair space and time. The procedures must be simple enough so that they can be performed satisfactorily by personnel without special knowledge in composite materials technology. Repairs of small holes should not require more than perhaps a short predrying cycle (with heat guns) and a subsequent patch bonding using a heating blanket, held in place by applying a vacuum. However, it has been observed during simulated experimental repair work that the glue lines frequently show a high content of pores and bubbles which are attributed to evaporation of moisture during the curing cycle. (Of course, other volatile materials such as residual solvent would act similarly). The purpose of this paper is to give some detailed analysis of the problem of moisture transport as a function of repair conditions, and to discuss some preliminary work to reduce the effect of moisture by removing moisture chemically with carbodiimides before it reaches a critical level for bubble formations.

Augl, J. M.↗
NASA NTRS1985

Circularly polarized microstrip antennas

A simple microstrip antenna can be made to radiate EM waves of any polarization, in particular, the circular polarization (CP) without any phasing network and power divider. A simple and accurate theory for this family of antennas was developed. However, the CP bandwidth, (CPBW) the bandwidth in which the axial ratio (AR) is less than a certain specified value, is very small. Most of the experimental designs were made for a feed placed along the diagonal of the patch. It is shown that there are practically infinitely many possible designs with different feed location. The speculation that other designs might give a wider bandwidth is clarified and an effective method for broadening the bandwidth is shown.

Lo, Y. T.↗
NASA NTRS1985

The magnetic field at the core-mantle boundary

Models of the geomagnetic field are, in general, produced from a least-squares fit of the coefficients in a truncated spherical harmonic expansion to the available data. Downward continuation of such models to the core-mantle boundary (CMB) is an unstable process: the results are found to be critically dependent on the choice of truncation level. Modern techniques allow this fundamental difficulty to be circumvented. The method of stochastic inversion is applied to modeling the geomagnetic field. Prior information is introduced by requiring that the spectrum of spherical harmonic coefficients to fall-off in a particular manner which is consistent with the Ohmic heating in the core having a finite lower bound. This results in models with finite errors in the radial field at the CMB. Curves of zero radial field can then be determined and integrals of the radial field over patches on the CMB bounded by these null-flux curves calculated. With the assumption of negligible magnetic diffusion in the core; frozen-flux hypothesis, these integrals are time-invariant.

Bloxham, J.↗
NASA NTRS1985

A study of the polarization of light scattered by vegetation

This study was undertaken in order to better understand the factors that govern the polarization of light scattered from vegetation and soils. The intensity and polarization of light scattered by clover and grass in vivo and soil were measured at a number of different angles of incidence and reflectance. Both individual leaves and natural patches of leaves were measured. The light transmitted through the leaves was found to be negatively polarized. The light scattered from the upper leaf surface was found to be positively polarized in a manner which could be accounted for qualitatively but not quantitatively by the Fresnel reflection coefficients modified by a shadowing function of the form cos sup2 (g/2), where g is the phase angle. Findings indicate that the polarization of light scattered by vegetation is a more complex process than previously thought, and that besides the surface-scattered component of light, the volume-scattered and multiply-scattered components also contribute significantly to the polarization.

Woessner, P. N.↗
NASA NTRS1986

MMIC antenna technology development in the 30/20 gigahertz band

This paper presents a progress summary of NASA's efforts in developing 20 and 30 GHz GaAs MMIC devices and an advanced satellite communications antenna system using these devices. In the interest of preserving resources such as frequency spectrum and orbital space the antenna system is being developed with multiple fixed spot beams and multiple scanning spot beams. NASA set high goals for the MMIC development to pushc GaAs technology. These goals and the main features of the MMIC devices are discussed. Some packaging and characterization considerations are also discussed. The 20 GHz transmit antenna and 30 GHz receive antenna are being developed separately. The approach selected is to perform contractual configuration studies, purchase a 20-GHz experimental antenna system (EAS) and perform in-house evaluation. The features and key specifications of the EAS are discussed. Additional supporting technologies such as effects of coupling on modest sized arrays, MMIC matching techniques, in-house analytical capability, wideband and dual frequency microstrip patch array development, and MMIC packaging techniques are described. Some plans for future are also discussed.

Smetana, J.↗
NASA NTRS1985

Dislocation model for aseismic fault slip in the transverse ranges of Southern California

Geodetic data at a plate boundary can reveal the pattern of subsurface displacements that accompany plate motion. These displacements are modelled as the sum of rigid block motion and the elastic effects of frictional interaction between blocks. The frictional interactions are represented by uniform dislocation on each of several rectangular fault patches. The block velocities and fault parameters are then estimated from geodetic data. Bayesian inversion procedure employs prior estimates based on geological and seismological data. The method is applied to the Transverse Ranges, using prior geological and seismological data and geodetic data from the USGS trilateration networks. Geodetic data imply a displacement rate of about 20 mm/yr across the San Andreas Fault, while the geologic estimates exceed 30 mm/yr. The prior model and the final estimates both imply about 10 mm/yr crustal shortening normal to the trend of the San Andreas Fault. Aseismic fault motion is a major contributor to plate motion. The geodetic data can help to identify faults that are suffering rapid stress accumulation; in the Transverse Ranges those faults are the San Andreas and the Santa Susana.

Cheng, A.↗
NASA NTRS1984

The cognitive connection: Software maintenance and documentation

With the goal of trying to understand what software maintainers do, talking aloud, video taped protocols with four expert maintainers were conducted as they were actively engaged in the process of enhancing a relatively small, interactive database program. The subjects exhibited a number of different types of information gathering strategies. Underlying these patterns of behavior, however, was the use of expectations about what should be seen in the program under examination. These expectations were generated on the basis of knowledge previously acquired as to the goals and programming plans that are typically employed in realizing interactive database programs. Thus, while the experts seemed to posses adequate programming knowledge, their actual code patches violated a basic principle of program structure. This failure by the programmers was attributed to ineffective program documentation. Suggestions for changes in the content of program documentation that should better facilitate software maintenance are presented.

Soloway, E.↗
NASA NTRS1986

Particle trajectory computation on a 3-dimensional engine inlet

A 3-dimensional particle trajectory computer code was developed to compute the distribution of water droplet impingement efficiency on a 3-dimensional engine inlet. The computed results provide the essential droplet impingement data required for the engine inlet anti-icing system design and analysis. The droplet trajectories are obtained by solving the trajectory equation using the fourth order Runge-Kutta and Adams predictor-corrector schemes. A compressible 3-D full potential flow code is employed to obtain a cylindrical grid definition of the flowfield on and about the engine inlet. The inlet surface is defined mathematically through a system of bi-cubic parametric patches in order to compute the droplet impingement points accurately. Analysis results of the 3-D trajectory code obtained for an axisymmetric droplet impingement problem are in good agreement with NACA experimental data. Experimental data are not yet available for the engine inlet impingement problem analyzed. Applicability of the method to solid particle impingement problems, such as engine sand ingestion, is also demonstrated.

Kim, J. J.↗